Resources

A common misconception among biology students is that 'dominant alleles are inherently more abundant in a population's gene pool than recessive alleles, and that dominant alleles physically alter or suppress the transcription of recessive alleles when present in the same cell nucleus.' Consider the ABO blood group gene (II), located on human chromosome 99, which has three common alleles: IAI^A, IBI^B, and ii. In an isolated human population of 10,00010{,}000 individuals, the frequency of allele ii (recessive) is q=0.70q = 0.70, while the frequency of allele IAI^A is p=0.20p = 0.20 and IBI^B is r=0.10r = 0.10. (a) Calculate the total number of recessive ii alleles present in the gene pool of this population. (b) Explain at the molecular level why allele ii is described as recessive to IAI^A without physically inactivating or altering the DNA sequence of IAI^A on the homologous chromosome. (c) Under Hardy-Weinberg equilibrium, calculate the expected number of individuals in this population who express the recessive blood type O\text{O} (genotype iiii).

Answer and steps

Final answer

(a) 14,00014{,}000 copies of allele ii; (b) Allele ii has a single-base deletion causing a frameshift that produces a non-functional glycosyltransferase, whereas IAI^A produces an active enzyme that transfers N-acetylgalactosamine to the H antigen independently; (c) 4,9004{,}900 individuals.

Steps

(a) Calculating the Total Number of Recessive ii Alleles

  1. Determine the total number of alleles in the gene pool: Humans are diploid organisms, meaning each individual carries two alleles for the autosomal ABO gene locus located on chromosome 99. Total alleles in the gene pool=2×N=2×10,000=20,000 alleles\text{Total alleles in the gene pool} = 2 \times N = 2 \times 10{,}000 = 20{,}000\text{ alleles}
  2. Calculate the count of allele ii: The allele frequency represents the proportion of that specific allele within the entire pool of alleles: Number of i alleles=q×Total alleles=0.70×20,000=14,000 copies\text{Number of } i \text{ alleles} = q \times \text{Total alleles} = 0.70 \times 20{,}000 = 14{,}000\text{ copies}

    Pitfall to avoid: Do not multiply the frequency directly by the number of individuals (10,00010{,}000), as each individual carries two alleles, not one.


(b) Molecular Basis of Recessiveness

  1. Independent transcription and translation: Alleles on homologous chromosomes are transcribed and translated independently in the nucleus and cytoplasm. A dominant allele does not physically silence, mutate, or suppress the recessive allele on the homologous chromosome.
  2. Enzyme function vs. non-function (loss of function):

    • Allele IAI^A: Codes for a functional glycosyltransferase (α\alpha-1,3-N-acetylgalactosaminyltransferase) that attaches N-acetylgalactosamine to the surface H-antigen on red blood cells, producing the A antigen.
    • Allele ii: Contains a single-base pair deletion (specifically a guanine deletion near the N-terminus) that causes a reading frameshift. This frameshift results in a premature stop codon, translating into a truncated, non-functional enzyme that cannot modify the H-antigen.
  3. Phenotypic masking via haplosufficiency: In an IAiI^A i heterozygote, both alleles are expressed. However, the single functional enzyme encoded by IAI^A produces enough A antigens on the cell surface to display the full blood type A phenotype. Because the non-functional product of allele ii merely leaves unmodified H-antigens without interfering with the IAI^A enzyme, allele ii behaves as functionally recessive.

(c) Calculating Expected Individuals with Blood Type O

  1. Identify the genotype corresponding to blood type O: Blood type O is a recessive trait expressed only in individuals homozygous for the ii allele (genotype iiii).
  2. Apply the Hardy-Weinberg equilibrium principle: Under Hardy-Weinberg assumptions, the expected genotype frequency of homozygotes is given by the square of the corresponding allele frequency: f(ii)=q2=(0.70)2=0.49f(ii) = q^2 = (0.70)^2 = 0.49
  3. Calculate the expected number of individuals: Expected number of ii individuals=f(ii)×N=0.49×10,000=4,900 individuals\text{Expected number of } ii \text{ individuals} = f(ii) \times N = 0.49 \times 10{,}000 = 4{,}900\text{ individuals}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that humans are diploid with two alleles per individual, multiplying the allele frequency directly by the number of individuals instead of the total allele pool.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total alleles=10,000  ⟹  Number of i alleles=0.70×10,000=7,000\text{Total alleles} = 10{,}000 \implies \text{Number of } i \text{ alleles} = 0.70 \times 10{,}000 = 7{,}000

    Correct

    Total alleles=2×10,000=20,000  ⟹  Number of i alleles=0.70×20,000=14,000\text{Total alleles} = 2 \times 10{,}000 = 20{,}000 \implies \text{Number of } i \text{ alleles} = 0.70 \times 20{,}000 = 14{,}000

    Humans are diploid organisms carrying two alleles per autosomal locus, so a population of 10,00010{,}000 individuals has a total gene pool of 20,00020{,}000 alleles at the ABO locus. Multiplying the allele frequency q=0.70q = 0.70 by 10,00010{,}000 instead of 20,00020{,}000 yields only half the actual number of copies.

  2. Step 2

    Allele IAI^A encodes an active enzyme that adds terminal sugars to form A antigens, while allele ii has a mutation yielding a nonfunctional enzyme. In heterozygotes, the presence of active enzyme from IAI^A is sufficient to produce A antigen on red blood cells, masking the silent ii allele without altering its DNA.

  3. Step 3

    Frequency of genotype ii=q2=0.702=0.49  ⟹  Number of type O individuals=0.49×10,000=4,900\text{Frequency of genotype } ii = q^2 = 0.70^2 = 0.49 \implies \text{Number of type O individuals} = 0.49 \times 10{,}000 = 4{,}900

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly described the molecular basis of dominance as haplosufficiency involving a functional enzyme masking an inactive enzyme.

You recognized that alleles on homologous chromosomes are expressed independently without DNA alteration.

You accurately calculated the expected number of homozygous recessive individuals using Hardy-Weinberg equilibrium.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Diploid gene pool scaling error

In part (a), you calculated 0.70×10,000=7,0000.70 \times 10{,}000 = 7{,}000 by equating the total number of alleles with the total number of individuals.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating individual count (NN) with total allele count in the gene pool (2N2N) for an autosomal locus in diploid organisms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gene Pool Size vs. Population Size
  • For any autosomal locus in a diploid population of NN individuals, the total number of alleles in the gene pool is 2N2N.

  • Always compute Total alleles=2N\text{Total alleles} = 2N before multiplying by an allele frequency to find allele counts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the ploidy of the organism: humans are diploid (2n2n), meaning each individual possesses 22 alleles for the ABO gene.

  2. Calculate the total number of alleles in the population's gene pool: Total alleles=2×10,000=20,000\text{Total alleles} = 2 \times 10{,}000 = 20{,}000.

  3. Multiply the allele frequency q=0.70q = 0.70 by the total allele pool: 0.70×20,000=14,0000.70 \times 20{,}000 = 14{,}000.

Final answer

(a) 14,00014{,}000 copies of allele ii; (b) Alleles IAI^A and ii are transcribed independently; IAI^A encodes an active glycosyltransferase while ii encodes a nonfunctional enzyme, producing the type A phenotype through haplosufficiency; (c) 4,9004{,}900 individuals.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down 'Total alleles = 2N2N' as your first step in any population genetics allele-counting problem.

  • Double-check whether a question asks for the count of an allele (out of 2N2N) or the count of individuals with a specific genotype (out of NN).

OverviewACEpath Teacher's Diagnosis

02 The student confuses the allele frequency q with the genotype frequency q², multiplying q directly by the population size to find the number of homozygous recessive individuals.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total gene pool=2×10,000=20,000 alleles  ⟹  Number of i alleles=0.70×20,000=14,000\text{Total gene pool} = 2 \times 10{,}000 = 20{,}000\text{ alleles} \implies \text{Number of } i \text{ alleles} = 0.70 \times 20{,}000 = 14{,}000

  2. Step 2

    Allele i produces a nonfunctional protein due to a frameshift mutation, whereas IA produces a functional transferase.  ⟹  Heterozygotes have normal A antigen displayed on their cell surface because one copy of functional enzyme is sufficient, leaving the homologous chromosome unaffected.\text{Allele } i \text{ produces a nonfunctional protein due to a frameshift mutation, whereas } I^A \text{ produces a functional transferase.} \implies \text{Heterozygotes have normal A antigen displayed on their cell surface because one copy of functional enzyme is sufficient, leaving the homologous chromosome unaffected.}

  3. Step 3

    Frequency of blood type O=q=0.70  ⟹  Number of individuals with blood type O=0.70×10,000=7,000\text{Frequency of blood type O} = q = 0.70 \implies \text{Number of individuals with blood type O} = 0.70 \times 10{,}000 = 7{,}000

    Correct

    f(type O)=f(ii)=q2=(0.70)2=0.49  ⟹  Number of individuals=0.49×10,000=4,900f(\text{type O}) = f(ii) = q^2 = (0.70)^2 = 0.49 \implies \text{Number of individuals} = 0.49 \times 10{,}000 = 4{,}900

    Blood type O requires the homozygous genotype iiii. Under Hardy-Weinberg equilibrium, the expected frequency of a homozygous genotype is q2q^2, not qq.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly accounted for diploidy when calculating the total allele count in the gene pool.

You provided an accurate, clear molecular explanation of loss-of-function and haplosufficiency for part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Allele Frequency vs. Genotype Frequency Confusion

In part (c), you set the frequency of individuals with blood type O equal to the single-allele frequency q=0.70q = 0.70 rather than the homozygous genotype frequency q2q^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the frequency of an allele in the gene pool (qq) as if it were the frequency of individuals expressing the homozygous recessive phenotype (q2q^2). In diploid organisms, forming a homozygous individual requires drawing two recessive alleles independently, so the genotype frequency is q×q=q2q \times q = q^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguishing Allele from Genotype Frequency
  • An allele frequency (p,q,rp, q, r) is the proportion of a specific single allele in the gene pool, whereas a genotype frequency (p2,2pq,q2p^2, 2pq, q^2) is the proportion of diploid individuals carrying a specific pair of alleles.

  • Always identify the genotype needed for the phenotype first. For a recessive trait like blood type O (genotype iiii), use f(ii)=q2f(ii) = q^2 before multiplying by population size NN.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the genotype for blood type O: individuals must be homozygous recessive (iiii).

  2. Apply Hardy-Weinberg equilibrium: f(ii)=q2=(0.70)2=0.49f(ii) = q^2 = (0.70)^2 = 0.49.

  3. Multiply the genotype frequency by total population size: 0.49×10,000=4,9000.49 \times 10{,}000 = 4{,}900.

Final answer

4,900 individuals4{,}900\text{ individuals}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Hardy-Weinberg equations, keeping allele frequencies (p+q=1p + q = 1) strictly separate from genotype frequencies (p2+2pq+q2=1p^2 + 2pq + q^2 = 1).

  • Practice converting between allele frequencies and expected phenotypic counts in diploid populations.

OverviewACEpath Teacher's Diagnosis

03 The student believes the misconception described in the prompt and claims that I^A physically represses or silences the transcription of the recessive i allele.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total alleles=2×10,000=20,000  ⟹  Number of i alleles=0.70×20,000=14,000\text{Total alleles} = 2 \times 10{,}000 = 20{,}000 \implies \text{Number of } i \text{ alleles} = 0.70 \times 20{,}000 = 14{,}000

  2. Step 2

    The dominant allele IAI^A acts as a transcriptional repressor that binds to the promoter of allele ii. This suppresses the expression of allele ii in the nucleus without altering its nucleotide sequence.

    Correct

    Both alleles are transcribed and translated independently; allele ii carries a single-base deletion leading to a frameshift and a non-functional enzyme (loss-of-function), whereas IAI^A produces an active glycosyltransferase whose presence is sufficient to confer the type A phenotype (haplosufficiency).

    Alleles on homologous chromosomes are transcribed independently and do not physically repress each other. Recessiveness in the ABO system is due to a loss-of-function frameshift mutation in the ii allele that produces a non-functional protein, while the functional enzyme from IAI^A is sufficient to mask the absence of activity.

  3. Step 3

    Genotype frequency of \text{Genotype frequency of } ii = q^2 = 0.70^2 = 0.49   ⟹  \implies Number of type O individuals\text{Number of type O individuals} = 0.49 ×\times 10{,}000 = 4{,}900

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly multiplied the population size by 22 to determine the total gene pool size for a diploid organism.

You applied the Hardy-Weinberg expectation q2q^2 accurately to determine the number of homozygous recessive individuals.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misconception regarding the molecular mechanism of dominance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated dominance as an active transcriptional repression mechanism rather than as a phenotypic relationship resulting from independent expression, enzyme function, and haplosufficiency.

REASONING PATH
Your ACEpath teacher’s suggested approach
Independent Transcription of Homologous Alleles
  • Alleles at the same locus on homologous chromosomes are transcribed and translated independently by cellular machinery.

  • Do not assume a dominant allele physically silences, binds, or represses the promoter of the recessive allele.

Molecular Basis of Loss-of-Function Recessiveness
  • Recessive alleles often code for non-functional or null proteins due to mutations (such as nonsense, frameshift, or critical missense mutations), while dominant alleles code for functional products that suffice to produce the phenotype.

  • Explain recessiveness in terms of protein product activity and haplosufficiency rather than inter-allelic transcriptional interference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State that both IAI^A and ii alleles are independently transcribed and translated in the cell.

  2. Identify that allele ii contains a single-nucleotide deletion causing a frameshift that results in a truncated, non-functional glycosyltransferase.

  3. Conclude that because the IAI^A allele produces active glycosyltransferase that successfully adds N-acetylgalactosamine to the H antigen, the functional enzyme determines the cell-surface phenotype (haplosufficiency).

Final answer

Allele ii is recessive because it encodes a non-functional glycosyltransferase resulting from a frameshift mutation; both alleles are expressed independently, but the functional enzyme from IAI^A masks the inactive product of ii.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how loss-of-function versus gain-of-function mutations establish dominance and recessiveness.

  • Practice distinguishing phenotypic dominance from direct gene-regulatory interactions like operon or eukaryotic repressor binding.

Lock it in

Similar question

01

In a diploid population of 250250 wild rabbits, the frequency of a recessive coat-color allele cc is 0.400.40. Calculate: (1) the total number of alleles at this locus in the gene pool, and (2) the total number of copies of allele cc.

Answer

(1) Total alleles =2×250=500= 2 \times 250 = 500. (2) Copies of allele c=0.40×500=200c = 0.40 \times 500 = 200 copies.

02

In a population of 1,2001{,}200 diploid fruit flies, an autosomal locus has two alleles, A1A_1 and A2A_2. Direct genotyping reveals that 400400 flies are A1A1A_1A_1, 600600 are A1A2A_1A_2, and 200200 are A2A2A_2A_2. Calculate the total number of copies of allele A1A_1 present in the gene pool and verify its frequency.

Answer

Total alleles =2×1,200=2,400= 2 \times 1{,}200 = 2{,}400. Copies of A1=(2×400)+(1×600)=800+600=1,400A_1 = (2 \times 400) + (1 \times 600) = 800 + 600 = 1{,}400 copies. Frequency p=1,4002,400=712≈0.583p = \frac{1{,}400}{2{,}400} = \frac{7}{12} \approx 0.583.

03

A tetraploid plant species (4n4n) has a population of 5,0005{,}000 individuals. At an autosomal locus with alleles RR and rr, the frequency of allele rr is 0.150.15. Assuming Hardy-Weinberg equilibrium, calculate: (1) the total number of rr alleles in the population, and (2) the expected number of individuals with the null homozygous genotype rrrrrrrr.

Answer

(1) Because the plant is tetraploid, each individual has 44 alleles. Total gene pool =4×5,000=20,000= 4 \times 5{,}000 = 20{,}000 alleles. Copies of allele r=0.15×20,000=3,000r = 0.15 \times 20{,}000 = 3{,}000 copies. (2) Genotype frequency f(rrrr)=q4=(0.15)4=0.00050625f(rrrr) = q^4 = (0.15)^4 = 0.00050625. Expected individuals =0.00050625×5,000≈2.53= 0.00050625 \times 5{,}000 \approx 2.53 (or approximately 22 to 33 individuals).

Loading workspace…