Resources

In a classic lab natural selection experiment mimicking Luria-Delbrück fluctuation, an investigator plates 1.00×1081.00 \times 10^8 cells of Escherichia coli onto solid agar media supplemented with 50.0 μg/mL50.0\ \mu\text{g/mL} ampicillin. Across 44 replicate culture tubes started from single cells and grown to saturation before plating, the number of surviving resistant colonies observed are: Tube 1 = 33 colonies, Tube 2 = 108108 colonies, Tube 3 = 00 colonies, Tube 4 = 4242 colonies. (a) In this experimental design, identify the environmental selection pressure and the resulting phenotypic adaptation. (b) Explain how the extreme variance in resistant colony counts between replicate cultures proves that the phenotypic variation arose via random mutation prior to plating rather than being induced as an adaptation to the antibiotic selection pressure.

Answer and steps

Final answer

(a) Environmental selection pressure: Ampicillin antibiotic in the agar medium (inhibition of peptidoglycan cell wall transpeptidase); Phenotypic adaptation: β\beta-lactamase activity or altered penicillin-binding protein conferring ampicillin resistance. (b) If ampicillin induced resistance directly, each plated cell would have a small, independent probability of mutating upon exposure, yielding a Poisson distribution where variance equals the mean. Instead, the observed massive variance (fluctuation from 00 to 108108 colonies) demonstrates that mutations occur spontaneously at random times during clonal division in the liquid culture prior to exposure: mutations occurring early produce massive 'jackpot' clusters of resistant descendants, whereas mutations occurring late or not at all yield few or zero colonies.

Steps

Part (a): Identifying Selection Pressure and Phenotypic Adaptation

  1. Environmental Selection Pressure:

    • Definition: A selection pressure is an external environmental factor that differentially reduces the reproductive success or survival of individuals lacking specific traits.
    • Application: In this setup, the selection pressure is the bactericidal antibiotic ampicillin present at 50.0 μg/mL50.0\ \mu\text{g/mL} in the solid agar medium. Mechanistically, ampicillin inhibits penicillin-binding proteins (transpeptidases), blocking cross-linking of the peptidoglycan cell wall and causing cell lysis in sensitive E. coli.
  2. Phenotypic Adaptation:

    • Definition: An adaptation is an inherited functional trait that increases an organism's fitness in an environment containing a specific selection pressure.
    • Application: The phenotypic adaptation is ampicillin resistance (ability to survive and form colonies in the presence of ampicillin), typically mediated by the expression of β\beta-lactamase enzymes that hydrolyze the antibiotic's β\beta-lactam ring or by mutations producing modified, low-affinity penicillin-binding proteins.

Part (b): Evaluating the Fluctuation Test Data (Random Pre-existing Mutation vs. Directed Adaptation)

  1. Hypothesis 1: Acquired / Induced Resistance (Lamarckian Model)

    • If exposure to ampicillin physically induced or triggered the protective mutation in a small fraction of bacteria upon plating, every single cell among the 1.00×1081.00 \times 10^8 cells plated would have an equal, independent probability pp of developing the mutation.
    • Under independent, identical trials with very small probability (n→∞n \to \infty, p→0p \to 0), the distribution of surviving colonies across replicate cultures would follow a Poisson distribution, where the variance is approximately equal to the mean (σ2≈μ\sigma^2 \approx \mu). In this scenario, counts across tubes would cluster tightly around the mean (e.g., values like 36,40,38,4236, 40, 38, 42).
  2. Hypothesis 2: Spontaneous Pre-existing Mutation (Darwinian Model / Luria-Delbrück Fluctuation)

    • If resistance mutations occur randomly during clonal division in the liquid growth tube prior to plating, the timing of the mutation event dictates the final number of resistant cells:
      • Early mutation: If a mutation occurs in an early generation of culture growth, the resistant mutant divides repeatedly, leaving a large lineage of resistant daughter cells. Plating this tube produces a massive cluster or "jackpot" of colonies (e.g., Tube 2 with 108108 colonies).
      • Late mutation: If a mutation occurs only in the final rounds of division before saturation, very few resistant cells exist at the time of plating (e.g., Tube 1 with 33 colonies).
      • No mutation: If no spontaneous mutation happens during growth, zero colonies appear on the selection plate (e.g., Tube 3 with 00 colonies).
  3. Conclusion from the Observed Variance:

    • The observed colony counts (0,3,42,1080, 3, 42, 108) show extreme variance (σ2≫μ\sigma^2 \gg \mu), which is fundamentally incompatible with the Poisson distribution predicted by directed adaptation.
    • This huge fluctuation directly proves that mutations arise spontaneously at random points in time prior to any exposure to the selection pressure, with the antibiotic acting strictly as a selective filter rather than an inductive agent.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the fluctuation test through a Lamarckian lens, claiming the antibiotic induces resistance on the plate and attributing the count variance to unequal exposure or individual physiological effort.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Selection pressure: ampicillin ⟹ Phenotypic adaptation: ampicillin resistance

  2. Step 2

    The antibiotic induces bacteria to develop resistance after being spread on the agar plate.

    Correct

    Mutations conferring resistance arise spontaneously at random points during clonal cell division prior to plating, rather than being induced by exposure to the antibiotic.

    You stated that the antibiotic induces resistance upon exposure. In Darwinian natural selection and the Luria–Delbrück model, environmental selection pressures do not direct or induce beneficial mutations; the antibiotic acts only as an environmental sieve that selects for pre-existing variants.

  3. Step 3

    The large variation in colony counts happens because bacteria in different tubes received slightly different amounts of antibiotic exposure, causing varying numbers of cells to adapt successfully.

    Correct

    If resistance were induced post-exposure, each cell would have an equal, independent probability of mutating, producing low variance (a Poisson distribution where σ2≈μ\sigma^2 \approx \mu). The extreme variance (fluctuation from 00 to 108108) occurs because spontaneous mutations arise at different generational times before plating: an early mutation yields a massive 'jackpot' lineage of resistant descendants, whereas late or absent mutations yield very few or zero colonies.

    You attributed the count fluctuation to variable exposure between tubes. Under standard plating conditions, exposure is uniform. The wide variance ({0,3,42,108}\{0, 3, 42, 108\}, where σ2≫μ\sigma^2 \gg \mu) proves that mutations happen spontaneously during liquid growth before plating: early mutations replicate into large 'jackpot' clones, while late mutations produce few or zero resistant cells.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified ampicillin as the environmental selection pressure.

You correctly identified ampicillin resistance as the phenotypic adaptation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Lamarckian induction vs. Darwinian pre-existing variation

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted antibiotic resistance as an acquired physiological response triggered by the environment (Lamarckian model) rather than recognizing that selection acts on pre-existing, spontaneous genetic variation whose timing of origin dictates population variance (Luria–Delbrück fluctuation).

REASONING PATH
Your ACEpath teacher’s suggested approach
Origin of Variation
  • Selection pressures filter existing variation; they do not induce targeted adaptive mutations.

  • Always treat genetic mutations as spontaneous events occurring prior to exposure to the selective agent.

The Fluctuation Principle
  • Independent post-exposure events yield a Poisson distribution (variance ≈\approx mean), whereas pre-exposure random mutations yield high variance (variance ≫\gg mean) due to early clonal amplification ('jackpots').

  • When evaluating replicate culture counts with extreme variance, explain that mutations occurring early in culture growth replicate into jackpot clusters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that ampicillin in the agar acts purely as a selective agent that kills non-resistant cells, not as an inductive trigger.

  2. Consider the statistical outcome if adaptation were induced: each plated cell would face an identical, independent chance of mutating, yielding colony counts tightly clustered around the mean (Poisson distribution, σ2≈μ\sigma^2 \approx \mu).

  3. Contrast this with pre-existing spontaneous mutations occurring in liquid culture before plating: the timing of the random mutation determines the final count.

  4. Relate the observed data to clonal expansion: an early mutation divides repeatedly to form a massive 'jackpot' (e.g., 108108 colonies), late mutations produce few cells (e.g., 33 colonies), and tubes with no mutation produce 00 colonies, resulting in σ2≫μ\sigma^2 \gg \mu.

Final answer

(a) Selection pressure: ampicillin; Phenotypic adaptation: ampicillin resistance. (b) If ampicillin induced resistance after plating, each cell would have an independent probability of adapting, producing a Poisson distribution where variance equals the mean. The extreme variance observed (0,3,42,1080, 3, 42, 108, where σ2≫μ\sigma^2 \gg \mu) demonstrates that mutations arise spontaneously at random times before exposure: early mutations divide into large 'jackpot' lineages, whereas late or absent mutations yield few or zero colonies.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between Lamarckian directed mutation and Darwinian selection on random pre-existing variation.

  • Practice comparing the expected statistical distributions (Poisson vs. Luria–Delbrück jackpot distribution) in microbial selection experiments.

  • Solve problems involving replica plating (e.g., the Lederberg experiment) to reinforce how pre-existing mutations are verified experimentally.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the selection pressure with the bacterial adaptation itself, reversing the two concepts.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Selection pressure: ampicillin resistance   ⟹  \implies Phenotypic adaptation: ampicillin

    Correct

    Selection pressure: ampicillin (antibiotic in the medium)   ⟹  \implies Phenotypic adaptation: ampicillin resistance (e.g., β\beta-lactamase activity)

    You reversed the two concepts. A selection pressure is an external environmental factor that exerts selective mortality on a population (here, the antibiotic ampicillin), whereas an adaptation is a heritable phenotypic trait of the organism that increases its fitness under that pressure (here, ampicillin resistance).

  2. Step 2

    If mutations were induced on the plate, every culture would show a similar number of colonies with variance close to the mean.   ⟹  \implies The huge fluctuation in colony counts shows that spontaneous mutations occurred at different times during growth before plating, producing clonal jackpots when mutations arose early.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly explained the statistical logic of the fluctuation test.

You clearly distinguished between pre-plating spontaneous mutations and post-plating induced mutations.

You identified that early division-cycle mutations cause clonal jackpots.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Concept reversal: selection pressure vs. adaptation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the external causal agent in the environment (the selection pressure) with the organism's evolved protective characteristic (the phenotypic adaptation).

REASONING PATH
Your ACEpath teacher’s suggested approach
Selection Pressure vs. Adaptation
  • Selection pressure is an external environmental challenge acting on an organism; adaptation is an internal or heritable trait of the organism that confers survival.

  • Always ask: 'What in the environment is trying to kill or filter the organism?' (Selection pressure) and 'What trait does the organism possess to survive it?' (Adaptation).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the external agent present in the medium: ampicillin (50.0 μg/mL50.0\ \mu\text{g/mL}). This is the environmental selection pressure.

  2. Identify the heritable bacterial trait that allows colony formation on that medium: ampicillin resistance (or β\beta-lactamase production). This is the phenotypic adaptation.

Final answer

(a) Selection pressure: ampicillin; Phenotypic adaptation: ampicillin resistance (or β\beta-lactamase activity). (b) High variance/jackpots demonstrate spontaneous pre-plating mutation rather than induced mutation.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between external abiotic/biotic environmental pressures and internal organismal phenotypes.

  • Practice categorizing evolutionary components in experimental setups (agent, trait, differential fitness).

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes that high variance occurs because mutations took place after plating at different rates, failing to recognize that pre-plating clonal expansion causes the jackpot effect.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Selection pressure: ampicillin Phenotypic adaptation: ampicillin resistance

  2. Step 2

    If mutations were pre-existing before plating, all tubes would have the same number of resistant bacteria because they grew for the same total time. The extreme variance proves that mutations occurred randomly after plating, where some plates experienced spontaneous mutation events much faster than others.

    Correct

    If mutations were induced after plating, each plated cell would face an independent, constant probability of mutating, producing colony counts that follow a Poisson distribution with small variance (σ2≈μ\sigma^2 \approx \mu). Instead, the observed extreme fluctuation (σ2≫μ\sigma^2 \gg \mu) occurs because spontaneous mutations happen prior to plating during liquid culture growth: an early mutation replicates over multiple generations to yield a massive 'jackpot' of resistant cells, whereas late mutations yield few or zero.

    You concluded that high variance shows mutations occurred after plating. In reality, post-plating events predict a Poisson distribution with low variance across replicates. The large variance is caused by the random timing of pre-plating mutations during liquid growth, where early mutations undergo clonal division to create large 'jackpot' populations.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the antibiotic ampicillin as the environmental selection pressure.

You correctly named ampicillin resistance as the phenotypic adaptation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fluctuation Test Clonal Timing Misconception

You treated pre-plating growth as producing identical mutant numbers across cultures, while attributing fluctuations between plates to post-plating mutation rates.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked how exponential clonal division amplifies early spontaneous mutations into 'jackpot' clusters prior to selection, confusing independent post-plating events (which yield low Poisson variance) with pre-plating lineage expansion (which yields extreme variance).

REASONING PATH
Your ACEpath teacher’s suggested approach
Post-Plating Mutation Model (Poisson Expectation)
  • If exposure to selection induces mutations, every individual cell has an equal, independent probability of mutating after plating.

  • Recognize that independent events across plates generate a Poisson distribution where variance is approximately equal to the mean (σ2≈μ\sigma^2 \approx \mu), meaning counts should be tightly clustered.

Pre-Plating Spontaneous Mutation Model (Jackpot Effect)
  • Spontaneous mutations occurring during liquid growth are inherited by all daughter cells through exponential division.

  • Connect early mutation timing to massive descendant clusters ('jackpots') and late timing to small clusters, directly explaining extreme variance (σ2≫μ\sigma^2 \gg \mu) across replicate tubes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that if resistance were induced after plating, each of the 1.00×1081.00 \times 10^8 cells would have an equal, independent chance to mutate, which would yield a Poisson distribution where variance roughly equals the mean (σ2≈μ\sigma^2 \approx \mu).

  2. Evaluate the observed counts (0,3,42,1080, 3, 42, 108): the variance is overwhelmingly larger than the mean (σ2≫μ\sigma^2 \gg \mu).

  3. Explain that this huge fluctuation proves mutations occurred spontaneously in liquid culture prior to plating. A mutation occurring early in tube growth divides into many resistant cells (a 'jackpot' like Tube 2 with 108108), whereas late or absent mutations yield few or no resistant cells (like Tube 1 with 33 and Tube 3 with 00).

Final answer

(a) Selection pressure: Ampicillin in the agar; Phenotypic adaptation: Ampicillin resistance. (b) Extreme variance (σ2≫μ\sigma^2 \gg \mu) rules out post-plating induction (which would follow a Poisson distribution with σ2≈μ\sigma^2 \approx \mu). It proves mutations occurred spontaneously prior to antibiotic exposure, where random timing during clonal growth leads to large jackpot clusters for early mutations and few or zero colonies for late or absent mutations.

NEXT STEPS
Final Takeaways from Your Teacher
  • Contrast the mathematical distribution expected from independent post-plating events (Poisson, σ2≈μ\sigma^2 \approx \mu) with the high-variance distribution produced by pre-plating clonal growth.

  • Draw a bacterial lineage tree showing how a single mutation at generation 2 yields far more resistant descendants than a mutation at generation 10.

Lock it in

Similar question

01

In a replica-plating experiment, an investigator stamps bacterial colonies from a master agar plate without antibiotics onto three replicate plates containing streptomycin. Resistant colonies appear at the exact same physical coordinates on all three replica plates. Explain whether this result supports directed adaptation or pre-existing spontaneous mutation.

Answer

It supports pre-existing spontaneous mutation. Because the colonies appeared at identical spatial positions on plates that had never encountered streptomycin prior to stamping, the resistant mutants must have already existed at those specific locations on the master plate before exposure to the antibiotic.

02

An investigator runs two parallel fluctuation setups with E.coliE. coli: Setup A plates 2020 independent small cultures grown separately from single cells. Setup B repeatedly samples 2020 aliquots from a single large saturated culture flask. Predict how the variance-to-mean ratio (σ2/μ\sigma^2 / \mu) of resistant colonies will differ between Setup A and Setup B.

Answer

Setup A will have σ2/μ≫1\sigma^2 / \mu \gg 1 (extreme fluctuation) because independent cultures experience random mutations at different generational times, producing jackpot cultures. Setup B will have σ2/μ≈1\sigma^2 / \mu \approx 1 (Poisson distribution) because repeatedly sampling from one well-mixed homogeneous flask eliminates differences in mutation timing across samples.

03

A culture of bacteria is treated with a sub-lethal dose of a mutagen that increases the general spontaneous mutation rate tenfold, but does not specifically target antibiotic-resistance genes. Predict the effect on: (1) the mean number of resistant colonies per tube, and (2) the variance across replicate tubes in a fluctuation test.

Answer

Both the mean and the variance will increase substantially. A higher spontaneous mutation rate raises the average probability of a resistance mutation occurring per division (increasing the mean), and random mutations occurring at widely varying generational times across tubes will continue to generate jackpot distributions, leading to an even wider spread and high variance (σ2≫μ\sigma^2 \gg \mu).

Loading workspace…