Resources

Auxin promotes primary stem elongation via the acid growth hypothesis, whereas transpiration-driven water potential gradients determine the physical expansion limit. When coleoptile segments are treated with exogenous indole-3-acetic acid (IAA\text{IAA}), plasma membrane H+\text{H}^+-ATPases pump protons into the apoplast, shifting the apoplastic pH\text{pH} from an initial value of pH1=6.20\text{pH}_1 = 6.20 down to pH2=4.70\text{pH}_2 = 4.70. Concurrently, the osmotic solute concentration in the symplast is maintained at C=0.250 MC = 0.250\text{ M} at T=293 KT = 293\text{ K}. Assuming an ideal ionization factor of i=1.00i = 1.00 and gas constant R=0.08314 L⋅bar/(mol⋅K)R = 0.08314\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}), calculate: (a) the fold increase in apoplastic hydronium ion concentration [H+][\text{H}^+] driving expansin activity, and (b) the theoretical solute potential (Ψs=−iCRT\Psi_s = -iCRT) of the symplast in bars\text{bars}.

Answer and steps

Final answer

(a) 31.6-fold increase31.6\text{-fold increase}; (b) Ψs=−6.09 bars\Psi_s = -6.09\text{ bars}

Steps

Part (a): Fold Increase in Apoplastic Hydronium Ion Concentration

  1. Relate pH\text{pH} to Hydronium Ion Concentration: The concentration of hydronium ions is related to pH\text{pH} by the logarithmic definition: [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}}
  2. Calculate the Ratio of Final to Initial Concentration: The fold increase represents the ratio of the final concentration [HX+]2[\ce{H+}]_2 to the initial concentration [HX+]1[\ce{H+}]_1: Fold Increase=[HX+]2[HX+]1=10−pH210−pH1=10−(pH2−pH1)\text{Fold Increase} = \frac{[\ce{H+}]_2}{[\ce{H+}]_1} = \frac{10^{-\text{pH}_2}}{10^{-\text{pH}_1}} = 10^{-(\text{pH}_2 - \text{pH}_1)}
  3. Substitute the Given Values: Fold Increase=10−(4.70−6.20)=101.50\text{Fold Increase} = 10^{-(4.70 - 6.20)} = 10^{1.50} 101.50=101⋅100.5=1010≈31.6210^{1.50} = 10^{1} \cdot 10^{0.5} = 10\sqrt{10} \approx 31.62

    Rounding to three significant figures gives a 31.631.6-fold increase.

Common Pitfall: Remember that pH\text{pH} is a base-1010 logarithmic scale. A decrease of 1.501.50 units means the concentration increases by 101.5010^{1.50}, not by a factor proportional to the difference itself.


Part (b): Theoretical Solute Potential (Ψs\Psi_s) of the Symplast

  1. State the Van 't Hoff Solute Potential Formula: Ψs=−iCRT\Psi_s = -iCRT where:

    • i=1.00i = 1.00 (ionization factor)
    • C=0.250 M=0.250 mol/LC = 0.250\text{ M} = 0.250\text{ mol/L} (molar concentration)
    • R=0.08314 L⋅bar/(mol⋅K)R = 0.08314\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}) (pressure gas constant)
    • T=293 KT = 293\text{ K} (absolute temperature)
  2. Calculate Ψs\Psi_s: Ψs=−(1.00)⋅(0.250 mol/L)⋅(0.08314 L⋅bar/(mol⋅K))⋅(293 K)\Psi_s = -(1.00) \cdot (0.250\text{ mol/L}) \cdot (0.08314\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K})) \cdot (293\text{ K}) Ψs=−6.090005 bars≈−6.09 bars\Psi_s = -6.090005\text{ bars} \approx -6.09\text{ bars}

Common Pitfall: Solute potential is always zero or negative in plant cells because solutes lower the free energy of water. Always include the negative sign in the calculation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student calculates the fold change by directly dividing the initial pH by the final pH rather than converting pH values to proton concentrations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fold increase=pH1pH2  ⟹  Fold increase=6.204.70≈1.32\text{Fold increase} = \frac{\text{pH}_1}{\text{pH}_2} \implies \text{Fold increase} = \frac{6.20}{4.70} \approx 1.32

    Correct

    Fold increase=[HX+]2[HX+]1=10−pH210−pH1=10−(4.70−6.20)=101.50≈31.6\text{Fold increase} = \frac{[\ce{H+}]_2}{[\ce{H+}]_1} = \frac{10^{-\text{pH}_2}}{10^{-\text{pH}_1}} = 10^{-(4.70 - 6.20)} = 10^{1.50} \approx 31.6

    You treated pH as a linear scale by directly dividing the two pH values. Because pH=−log⁡10[HX+]\text{pH} = -\log_{10}[\ce{H+}], hydronium concentration is exponential: [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}}. A decrease of 1.501.50 pH units corresponds to a 101.50≈31.610^{1.50} \approx 31.6-fold increase in [HX+][\ce{H+}], not 1.321.32.

  2. Step 2

    Ψs=−iCRT  ⟹  Ψs=−(1.00)(0.250)(0.08314)(293)  ⟹  Ψs=−6.09 bar\Psi_s = -iCRT \implies \Psi_s = -(1.00)(0.250)(0.08314)(293) \implies \Psi_s = -6.09\text{ bar}

WHAT YOU DID WELL
Compliments from Your Teacher

You stated and computed the theoretical solute potential formula Ψs=−iCRT\Psi_s = -iCRT with full accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear treatment of logarithmic scale

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated pH as a direct measure of concentration rather than an inverse logarithmic scale, leading to a direct quotient of pH numbers rather than calculating the ratio of 10−pH10^{-\text{pH}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logarithmic to Linear Conversion
  • Whenever you compute a fold change or ratio of concentrations from pH, convert each pH value via [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}}.

  • Express the ratio as [HX+]final[HX+]initial=10pHinitial−pHfinal\frac{[\ce{H+}]_{\text{final}}}{[\ce{H+}]_{\text{initial}}} = 10^{\text{pH}_{\text{initial}} - \text{pH}_{\text{final}}} before evaluating.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the concentration definition: [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}}.

  2. Set up the fold increase: [HX+]2[HX+]1=10−(4.70−6.20)=101.50\frac{[\ce{H+}]_2}{[\ce{H+}]_1} = 10^{-(4.70 - 6.20)} = 10^{1.50}.

  3. Evaluate the power of ten: 101.50=101⋅100.50≈31.6210^{1.50} = 10^1 \cdot 10^{0.50} \approx 31.62.

Final answer

(a) 31.6-fold increase31.6\text{-fold increase}; (b) Ψs=−6.09 bars\Psi_s = -6.09\text{ bars}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review logarithmic concentration scales and practice computing fold changes from differences in pH.

  • Remember that each decrease of 1.01.0 pH unit multiplies [HX+][\ce{H+}] by a factor of 1010.

OverviewACEpath Teacher's Diagnosis

02 A student omits the negative sign in the solute potential formula, calculating a positive value for Ψs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [H+]1=10−6.20[\text{H}^+]_1 = 10^{-6.20} ⟹ [H+]2=10−4.70[\text{H}^+]_2 = 10^{-4.70} ⟹ Fold increase=10−4.7010−6.20=101.50≈31.6\text{Fold increase} = \frac{10^{-4.70}}{10^{-6.20}} = 10^{1.50} \approx 31.6

  2. Step 2

    Ψs=iCRT\Psi_s = iCRT

    Correct

    Ψs=−iCRT\Psi_s = -iCRT

    You omitted the negative sign in the solute potential formula. Solute potential is defined as Ψs=−iCRT\Psi_s = -iCRT because dissolved solutes lower the chemical potential (free energy) of pure water.

  3. Step 3

    Ψs=(1.00)(0.250)(0.08314)(293)  ⟹  Ψs=6.09 bar\Psi_s = (1.00)(0.250)(0.08314)(293) \implies \Psi_s = 6.09\text{ bar}

    Correct

    Ψs=−(1.00)(0.250)(0.08314)(293)=−6.09 bars\Psi_s = -(1.00)(0.250)(0.08314)(293) = -6.09\text{ bars}

    Because the formula was missing the initial negative sign, your final numerical value became positive +6.09 bar+6.09\text{ bar} rather than the correct negative value −6.09 bars-6.09\text{ bars}.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted logarithmic pH values to hydronium ion concentrations.

You calculated the fold increase in apoplastic [H+][\text{H}^+] to three significant figures.

You correctly substituted the values for ii, CC, RR, and TT and accurately computed their product.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Definition Error

You accidentally omitted the negative sign in the solute potential equation Ψs=−iCRT\Psi_s = -iCRT.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the magnitude of osmotic pressure (Π=iCRT\Pi = iCRT, which is always positive) with solute potential (Ψs=−Π=−iCRT\Psi_s = -\Pi = -iCRT, which is always non-positive because solutes reduce the free energy of water).

REASONING PATH
Your ACEpath teacher’s suggested approach
Solute Potential Definition
  • The solute potential of any aqueous solution with dissolved solutes is strictly negative: Ψs=−iCRT\Psi_s = -iCRT.

  • Always write the formula with the explicit negative sign before substituting values, and verify that pure water is Ψs=0\Psi_s = 0 while solutions have Ψs<0\Psi_s < 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the correct van 't Hoff formula for solute potential: Ψs=−iCRT\Psi_s = -iCRT.

  2. Substitute the given parameters: Ψs=−(1.00)(0.250 mol/L)(0.08314 L⋅bar/(mol⋅K))(293 K)\Psi_s = -(1.00)(0.250\text{ mol/L})(0.08314\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}))(293\text{ K}).

  3. Multiply the factors: Ψs=−6.090005 bars≈−6.09 bars\Psi_s = -6.090005\text{ bars} \approx -6.09\text{ bars}.

Final answer

(a) 31.6-fold increase31.6\text{-fold increase}; (b) Ψs=−6.09 bars\Psi_s = -6.09\text{ bars}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that solute potential (Ψs\Psi_s) can never be positive in biological systems.

  • Practice distinguishing between osmotic pressure (Π≥0\Pi \ge 0) and osmotic/solute potential (Ψs≤0\Psi_s \le 0).

  • Review how cell turgor pressure (Ψp\Psi_p) and solute potential (Ψs\Psi_s) combine to determine overall water potential: Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

OverviewACEpath Teacher's Diagnosis

03 A student inverts the ratio by subtracting the initial pH from the final pH in the exponent, yielding the fold decrease instead of fold increase.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔpH=4.70−6.20=−1.50  ⟹  Fold change=10∧(−1.50)≈0.0316\Delta\text{pH} = 4.70 - 6.20 = -1.50 \implies \text{Fold change} = 10^{\wedge}(-1.50) \approx 0.0316

    Correct

    Fold increase=[H+]2[H+]1=10−(pH2−pH1)=10−(−1.50)=101.50≈31.6\text{Fold increase} = \frac{[\text{H}^+]_2}{[\text{H}^+]_1} = 10^{-(\text{pH}_2 - \text{pH}_1)} = 10^{-(-1.50)} = 10^{1.50} \approx 31.6

    Because pH=−log⁡10[H+]\text{pH} = -\log_{10}[\text{H}^+], the concentration is [H+]=10−pH[\text{H}^+] = 10^{-\text{pH}}. A decrease in pH\text{pH} means an increase in [H+][\text{H}^+], so the ratio of final to initial concentration is 10−(pH2−pH1)=10−(−1.50)=101.50≈31.6-fold10^{-(\text{pH}_2 - \text{pH}_1)} = 10^{-(-1.50)} = 10^{1.50} \approx 31.6\text{-fold}, not 0.03160.0316.

  2. Step 2

    Ψs=−iCRT  ⟹  Ψs=−(1.00)(0.250)(0.08314)(293)  ⟹  Ψs=−6.09 bar\Psi_s = -iCRT \implies \Psi_s = -(1.00)(0.250)(0.08314)(293) \implies \Psi_s = -6.09\text{ bar}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the difference between final and initial pH values.

You recalled and properly set up the van 't Hoff solute potential formula Ψs=−iCRT\Psi_s = -iCRT.

You accurately evaluated the numerical computation for Ψs\Psi_s with correct units and negative sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Logarithmic Sign Error

You calculated 10ΔpH10^{\Delta\text{pH}} rather than 10−ΔpH10^{-\Delta\text{pH}} when finding the fold change in [H+][\text{H}^+].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the negative sign in the definition pH=−log⁡10[H+]\text{pH} = -\log_{10}[\text{H}^+] leads to calculating the ratio as 10pH2−pH110^{\text{pH}_2 - \text{pH}_1} instead of 10−(pH2−pH1)10^{-(\text{pH}_2 - \text{pH}_1)}, resulting in the fractional reciprocal of the true fold increase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction Check for pH vs. [H⁺]
  • Lower pH means higher acidity and greater [H+][\text{H}^+].

  • Whenever pH decreases, verify that your calculated fold change in [H+][\text{H}^+] is greater than 11.

Ratio Formula for pH Changes
  • [H+]final[H+]initial=10−(pHfinal−pHinitial)=10pHinitial−pHfinal\frac{[\text{H}^+]_\text{final}}{[\text{H}^+]_\text{initial}} = 10^{-(\text{pH}_\text{final} - \text{pH}_\text{initial})} = 10^{\text{pH}_\text{initial} - \text{pH}_\text{final}}.

  • Subtract the final pH from the initial pH in the exponent, or negate ΔpH\Delta\text{pH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the ratio of concentrations: [H+]2[H+]1=10−pH210−pH1=10pH1−pH2\frac{[\text{H}^+]_2}{[\text{H}^+]_1} = \frac{10^{-\text{pH}_2}}{10^{-\text{pH}_1}} = 10^{\text{pH}_1 - \text{pH}_2}.

  2. Substitute the initial and final pH values: 106.20−4.70=101.5010^{6.20 - 4.70} = 10^{1.50}.

  3. Evaluate 101.50=1010≈31.610^{1.50} = 10\sqrt{10} \approx 31.6.

Final answer

(a) 31.6-fold increase31.6\text{-fold increase}; (b) Ψs=−6.09 bars\Psi_s = -6.09\text{ bars}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how logarithmic negative signs invert ratios when converting from pH differences to concentration multipliers.

  • Practice checking whether your calculated fold change makes physical sense: an acidified apoplast must have a concentration ratio greater than 1.

Lock it in

Similar question

01

During auxin-induced acid growth, the apoplast pH drops from 5.805.80 to 4.804.80. Calculate the fold increase in apoplastic [HX+][\ce{H+}].

Answer

Fold increase=10−(pH2−pH1)=10−(4.80−5.80)=101.00=10-fold increase\text{Fold increase} = 10^{-(\text{pH}_2 - \text{pH}_1)} = 10^{-(4.80 - 5.80)} = 10^{1.00} = 10\text{-fold increase}.

02

A researcher measures an initial apoplastic hydronium concentration of [HX+]1=2.0×10−6 M[\ce{H+}]_1 = 2.0 \times 10^{-6}\text{ M}. Following IAA application, [HX+][\ce{H+}] increases by 2525-fold. Determine the final apoplastic pH to two decimal places.

Answer

[HX+]2=25×(2.0×10−6 M)=5.0×10−5 M[\ce{H+}]_2 = 25 \times (2.0 \times 10^{-6}\text{ M}) = 5.0 \times 10^{-5}\text{ M}. Then pH2=−log⁡10(5.0×10−5)=5−log⁡10(5.0)≈5−0.699=4.30\text{pH}_2 = -\log_{10}(5.0 \times 10^{-5}) = 5 - \log_{10}(5.0) \approx 5 - 0.699 = 4.30.

03

In a corn coleoptile cell, the vacuolar sap has an osmotic concentration of C=0.320 MC = 0.320\text{ M} at 20∘C20^\circ\text{C} (i=1.00i = 1.00, R=0.08314 L⋅bar/(mol⋅K)R = 0.08314\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K})). Simultaneously, proton pumping lowers the cell wall pH from 6.406.40 to 4.604.60. Calculate: (a) the fold increase in apoplastic [HX+][\ce{H+}], and (b) the vacuolar solute potential Ψs\Psi_s in bars.

Answer

(a) Fold increase=10−(4.60−6.40)=101.80≈63.1-fold increase\text{Fold increase} = 10^{-(4.60 - 6.40)} = 10^{1.80} \approx 63.1\text{-fold increase}. (b) T=20+273.15=293.15 KT = 20 + 273.15 = 293.15\text{ K}; Ψs=−iCRT=−(1.00)(0.320)(0.08314)(293.15)≈−7.80 bars\Psi_s = -iCRT = -(1.00)(0.320)(0.08314)(293.15) \approx -7.80\text{ bars}.

Loading workspace…