Resources

In healthy renal homeostasis, glucose filtered at the glomerulus is completely reabsorbed into peritubular capillaries via apical sodium-glucose cotransporters (SGLT2 and SGLT1) in the proximal convoluted tubule, maintaining glucosuria at 0 mg/min0\text{ mg/min}. In an adult patient with a constant glomerular filtration rate (GFR) of 125 mL/min125\text{ mL/min} and a maximal tubular transport capacity (TmT_m) of 375 mg/min375\text{ mg/min}, calculate: (a) the critical plasma glucose threshold concentration [glucose]threshold[\text{glucose}]_{\text{threshold}} (in mg/dL\text{mg/dL}) above which the tubular reabsorption mechanism saturates and glycosuria begins, and (b) the urinary glucose excretion rate (in mg/min\text{mg/min}) if severe metabolic decompensation elevates plasma glucose concentration to [glucose]=420 mg/dL[\text{glucose}] = 420\text{ mg/dL}.

Answer and steps

Final answer

(a) [glucose]threshold=300 mg/dL[\text{glucose}]_{\text{threshold}} = 300\text{ mg/dL}; (b) Excretion rate=150 mg/min\text{Excretion rate} = 150\text{ mg/min}

Steps

Part (a): Determining the Plasma Glucose Renal Threshold

Renal handling of glucose depends on the balance between filtration and tubular reabsorption:

  1. Filtered Load (mg/min\text{mg/min}) is the amount of glucose that enters Bowman's space per unit time: Filtered Load=GFR×[glucose]plasma\text{Filtered Load} = \text{GFR} \times [\text{glucose}]_{\text{plasma}}
  2. Transport Maximum (TmT_m) is the absolute maximum rate at which carrier proteins (SGLT2 and SGLT1) can reabsorb glucose back into the blood.

In this idealized model, glycosuria begins when the filtered load of glucose exceeds the maximum reabsorption capacity (TmT_m): Filtered Load=Tm\text{Filtered Load} = T_m

Substitute the known values into the equation: 125 mL/min×[glucose]threshold=375 mg/min125\text{ mL/min} \times [\text{glucose}]_{\text{threshold}} = 375\text{ mg/min}

Solve for the threshold concentration in mg/mL\text{mg/mL}: [glucose]threshold=375 mg/min125 mL/min=3 mg/mL[\text{glucose}]_{\text{threshold}} = \frac{375\text{ mg/min}}{125\text{ mL/min}} = 3\text{ mg/mL}

Convert the units from mg/mL\text{mg/mL} to mg/dL\text{mg/dL} (1 dL=100 mL1\text{ dL} = 100\text{ mL}): [glucose]threshold=3 mg/mL×100 mL/dL=300 mg/dL[\text{glucose}]_{\text{threshold}} = 3\text{ mg/mL} \times 100\text{ mL/dL} = 300\text{ mg/dL}


Part (b): Calculating the Urinary Glucose Excretion Rate

When plasma glucose concentration rises above the renal threshold, the reabsorption mechanism is fully saturated, meaning glucose is reabsorbed at the constant maximum rate Tm=375 mg/minT_m = 375\text{ mg/min}. Any filtered glucose beyond this capacity is excreted in the urine:

Excretion Rate=Filtered Load−Reabsorbed Load\text{Excretion Rate} = \text{Filtered Load} - \text{Reabsorbed Load}

  1. Convert plasma concentration to mg/mL\text{mg/mL}: [glucose]=420 mg/dL=420 mg100 mL=4.2 mg/mL[\text{glucose}] = 420\text{ mg/dL} = \frac{420\text{ mg}}{100\text{ mL}} = 4.2\text{ mg/mL}
  2. Calculate the filtered load: Filtered Load=GFR×[glucose]=125 mL/min×4.2 mg/mL=525 mg/min\text{Filtered Load} = \text{GFR} \times [\text{glucose}] = 125\text{ mL/min} \times 4.2\text{ mg/mL} = 525\text{ mg/min}
  3. Calculate the excretion rate: Because the filtered load (525 mg/min525\text{ mg/min}) exceeds TmT_m (375 mg/min375\text{ mg/min}), reabsorption is capped at TmT_m: Excretion Rate=525 mg/min−375 mg/min=150 mg/min\text{Excretion Rate} = 525\text{ mg/min} - 375\text{ mg/min} = 150\text{ mg/min}

Common Pitfall: Always verify unit consistency. Glomerular filtration rate is given in mL/min\text{mL/min}, whereas clinical plasma concentrations are reported in mg/dL\text{mg/dL}. Forgetting to divide mg/dL\text{mg/dL} by 100100 when multiplying by GFR leads to an incorrect scale factor of 100100.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milliliters to deciliters, leaving the plasma glucose threshold concentration in mg/mL rather than mg/dL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Filtered load=Tm at threshold  ⟹  [glucose]threshold=TmGFR\text{Filtered load} = T_m \text{ at threshold} \implies [\text{glucose}]_{\text{threshold}} = \frac{T_m}{\text{GFR}}

  2. Step 2

    [glucose]threshold=375 mg/min125 mL/min=3 mg/dL[\text{glucose}]_{\text{threshold}} = \frac{375\text{ mg/min}}{125\text{ mL/min}} = 3\text{ mg/dL}

    Correct

    [glucose]threshold=375 mg/min125 mL/min=3 mg/mL=300 mg/dL[\text{glucose}]_{\text{threshold}} = \frac{375\text{ mg/min}}{125\text{ mL/min}} = 3\text{ mg/mL} = 300\text{ mg/dL}

    Dividing 375 mg/min375\text{ mg/min} by 125 mL/min125\text{ mL/min} yields 3 mg/mL3\text{ mg/mL}. Since 1 dL=100 mL1\text{ dL} = 100\text{ mL}, you need to multiply by 100 mL/dL100\text{ mL/dL} to convert the concentration to mg/dL\text{mg/dL}, giving 300 mg/dL300\text{ mg/dL}.

  3. Step 3

    Filtered load=(125 mL/min)×(4.2 mg/mL)=525 mg/min\text{Filtered load} = (125\text{ mL/min}) \times (4.2\text{ mg/mL}) = 525\text{ mg/min}

  4. Step 4

    Excretion rate=Filtered load−Tm  ⟹  Excretion rate=525 mg/min−375 mg/min=150 mg/min\text{Excretion rate} = \text{Filtered load} - T_m \implies \text{Excretion rate} = 525\text{ mg/min} - 375\text{ mg/min} = 150\text{ mg/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that glycosuria begins when the filtered load equals TmT_m.

You successfully converted plasma glucose from mg/dL\text{mg/dL} to mg/mL\text{mg/mL} when calculating the filtered load in part (b).

You correctly applied the mass-balance equation Excretion=Filtered−Reabsorbed\text{Excretion} = \text{Filtered} - \text{Reabsorbed} to find the final excretion rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission

You correctly divided the numbers to get 33, but you assigned the unit mg/dL\text{mg/dL} instead of mg/mL\text{mg/mL}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking intermediate dimensional units during division: dividing a volume rate in mL/min\text{mL/min} naturally yields volume in mL\text{mL}, requiring an explicit conversion factor of 100 mL/dL100\text{ mL/dL} to reach mg/dL\text{mg/dL}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Tracking
  • mg/minmL/min=mg/mL\frac{\text{mg/min}}{\text{mL/min}} = \text{mg/mL}, not mg/dL\text{mg/dL}.

  • Always write down the intermediate unit resulting from division before converting to the requested target unit.

Deciliter Conversion Factor
  • 1 dL=100 mL1\text{ dL} = 100\text{ mL}, so 1 mg/mL=100 mg/dL1\text{ mg/mL} = 100\text{ mg/dL}.

  • Multiply a concentration in mg/mL\text{mg/mL} by 100100 to express it in clinical standard mg/dL\text{mg/dL}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the threshold concentration in primary units: [glucose]threshold=375 mg/min125 mL/min=3 mg/mL[\text{glucose}]_{\text{threshold}} = \frac{375\text{ mg/min}}{125\text{ mL/min}} = 3\text{ mg/mL}.

  2. Apply the deciliter unit conversion factor (1 dL=100 mL1\text{ dL} = 100\text{ mL}): 3 mg/mL×100 mL/dL=300 mg/dL3\text{ mg/mL} \times 100\text{ mL/dL} = 300\text{ mg/dL}.

Final answer

(a) [glucose]threshold=300 mg/dL[\text{glucose}]_{\text{threshold}} = 300\text{ mg/dL}; (b) Excretion rate=150 mg/min\text{Excretion rate} = 150\text{ mg/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the units explicitly at each calculation step rather than converting implicitly in your head.

  • Practice converting concentrations between mg/mL\text{mg/mL} and mg/dL\text{mg/dL} until multiplying or dividing by 100100 becomes second nature.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly assumes that glucose is 100% reabsorbed without accounting for the transport maximum (Tm) saturation limit, leading to an excretion rate of 0 mg/min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [glucose]threshold=TmGFR  ⟹  [glucose]threshold=375 mg/min1.25 dL/min=300 mg/dL[\text{glucose}]_{\text{threshold}} = \frac{T_m}{\text{GFR}} \implies [\text{glucose}]_{\text{threshold}} = \frac{375\text{ mg/min}}{1.25\text{ dL/min}} = 300\text{ mg/dL}

  2. Step 2

    Filtered load=(1.25 dL/min)×(420 mg/dL)=525 mg/min\text{Filtered load} = (1.25\text{ dL/min}) \times (420\text{ mg/dL}) = 525\text{ mg/min}

  3. Step 3

    All filtered glucose is completely reabsorbed by proximal tubules  ⟹  Excretion rate=0 mg/min\text{All filtered glucose is completely reabsorbed by proximal tubules} \implies \text{Excretion rate} = 0\text{ mg/min}

    Correct

    Excretion rate=Filtered load−Tm=525 mg/min−375 mg/min=150 mg/min\text{Excretion rate} = \text{Filtered load} - T_m = 525\text{ mg/min} - 375\text{ mg/min} = 150\text{ mg/min}

    Because the filtered load (525 mg/min525\text{ mg/min}) exceeds the transport maximum TmT_m (375 mg/min375\text{ mg/min}), carrier proteins (SGLT2/1) are fully saturated. Reabsorption is capped at 375 mg/min375\text{ mg/min}, so the remaining 150 mg/min150\text{ mg/min} spills into the urine.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the relationship between renal threshold, glomerular filtration rate, and transport maximum.

You handled the unit conversion between mL\text{mL} and dL\text{dL} accurately when working with GFR.

You calculated the filtered load for part (b) without computational error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Carrier Saturation Limit Neglected

You remembered the baseline physiological state where urine is glucose-free, but forgot to cap reabsorption at TmT_m once the filtered load exceeds the renal threshold.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overextending the normoglycemic physiological rule ('all filtered glucose is reabsorbed') to severe hyperglycemic conditions where carrier-mediated proximal tubule transport has reached its absolute saturation capacity (TmT_m).

REASONING PATH
Your ACEpath teacher’s suggested approach
Compare Filtered Load to Transport Maximum
  • If Filtered Load≤Tm\text{Filtered Load} \le T_m, reabsorption equals the filtered load and excretion is 00. If Filtered Load>Tm\text{Filtered Load} > T_m, reabsorption is capped at TmT_m.

  • Whenever you calculate a filtered load, immediately compare it to TmT_m before deciding whether any substance spills into the urine.

Renal Excretion Equation
  • Excretion Rate=Filtered Load−Reabsorbed Load+Secreted Load\text{Excretion Rate} = \text{Filtered Load} - \text{Reabsorbed Load} + \text{Secreted Load}.

  • Subtract the saturated reabsorption rate (TmT_m) from the filtered load to determine the excretion rate when carrier saturation is reached.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the filtered load (525 mg/min525\text{ mg/min}) to the tubular maximum (Tm=375 mg/minT_m = 375\text{ mg/min}). Since 525>375525 > 375, the transporters are saturated.

  2. Set the reabsorbed load equal to the maximum transport capacity: Reabsorbed Load=Tm=375 mg/min\text{Reabsorbed Load} = T_m = 375\text{ mg/min}.

  3. Compute the excretion rate: Excretion Rate=Filtered Load−Tm=525 mg/min−375 mg/min=150 mg/min\text{Excretion Rate} = \text{Filtered Load} - T_m = 525\text{ mg/min} - 375\text{ mg/min} = 150\text{ mg/min}.

Final answer

(a) [glucose]threshold=300 mg/dL[\text{glucose}]_{\text{threshold}} = 300\text{ mg/dL}; (b) Excretion rate=150 mg/min\text{Excretion rate} = 150\text{ mg/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the titration curve for renal glucose handling, paying attention to the inflection point where filtered load separates from reabsorption.

  • Practice identifying whether a patient's plasma concentration is above or below [glucose]threshold[\text{glucose}]_{\text{threshold}} as the first diagnostic step before solving for excretion.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts filtered load from the transport maximum instead of subtracting reabsorption from filtered load, reversing the terms in the excretion equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [glucose]threshold=TmGFR⟹[glucose]threshold=375 mg/min1.25 dL/min=300 mg/dL[\text{glucose}]_{\text{threshold}} = \frac{T_m}{\text{GFR}} \Longrightarrow [\text{glucose}]_{\text{threshold}} = \frac{375\text{ mg/min}}{1.25\text{ dL/min}} = 300\text{ mg/dL}

  2. Step 2

    Filtered load=(1.25 dL/min)×(420 mg/dL)=525 mg/min\text{Filtered load} = (1.25\text{ dL/min}) \times (420\text{ mg/dL}) = 525\text{ mg/min}

  3. Step 3

    Excretion rate=Tm−Filtered load⟹Excretion rate=375 mg/min−525 mg/min=−150 mg/min\text{Excretion rate} = T_m - \text{Filtered load} \Longrightarrow \text{Excretion rate} = 375\text{ mg/min} - 525\text{ mg/min} = -150\text{ mg/min}

    Correct

    Excretion rate=Filtered load−Tm=525 mg/min−375 mg/min=150 mg/min\text{Excretion rate} = \text{Filtered load} - T_m = 525\text{ mg/min} - 375\text{ mg/min} = 150\text{ mg/min}

    Urine excretion consists of the solute filtered into the nephron minus what is reclaimed by reabsorption. Subtracting the entering load from the reabsorbed capacity produces a negative excretion rate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related renal threshold to glomerular filtration rate and tubular transport maximum.

You converted volumetric flow units accurately between mL/min\text{mL/min} and dL/min\text{dL/min}.

You accurately calculated the filtered load for the elevated plasma glucose state.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Mass Balance Terms

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the minuend and subtrahend in the renal mass balance equation, subtracting the entering filtered load from the transport maximum instead of subtracting reabsorption from filtration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Renal Conservation of Mass
  • Excreted=Filtered−Reabsorbed+Secreted\text{Excreted} = \text{Filtered} - \text{Reabsorbed} + \text{Secreted}

  • Always identify the input stream (filtration) first, then subtract the reclaimed stream (reabsorption).

Sign Feasibility Check
  • Excretion rate cannot be negative (extExcretion≥0 ext{Excretion} \ge 0).

  • If a calculated excretion rate is negative, verify whether the filtered load is below saturation or if your subtraction order was inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the mass balance for a reabsorbed solute: Excretion rate=Filtered load−Reabsorption rate\text{Excretion rate} = \text{Filtered load} - \text{Reabsorption rate}.

  2. Since Filtered load=525 mg/min>Tm=375 mg/min\text{Filtered load} = 525\text{ mg/min} > T_m = 375\text{ mg/min}, reabsorption is fully saturated at Tm=375 mg/minT_m = 375\text{ mg/min}.

  3. Substitute the quantities into the difference: Excretion rate=525 mg/min−375 mg/min=150 mg/min\text{Excretion rate} = 525\text{ mg/min} - 375\text{ mg/min} = 150\text{ mg/min}.

Final answer

(a) [glucose]threshold=300 mg/dL[\text{glucose}]_{\text{threshold}} = 300\text{ mg/dL}; (b) Excretion rate=150 mg/min\text{Excretion rate} = 150\text{ mg/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the fundamental conservation law: What goes out into the urine is whatever entered minus whatever was taken back.

  • Perform a sanity check on any excretion calculation to ensure the resulting value is non-negative.

  • Practice distinguishing filtered load from excreted load across different tubular transport scenarios.

Lock it in

Similar question

01

A patient has a GFR\text{GFR} of 100 mL/min100\text{ mL/min} and a glucose transport maximum (TmT_m) of 250 mg/min250\text{ mg/min}. Calculate the renal threshold for glucose in mg/dL\text{mg/dL}.

Answer

[glucose]threshold=250 mg/min100 mL/min=2.5 mg/mL[\text{glucose}]_{\text{threshold}} = \frac{250\text{ mg/min}}{100\text{ mL/min}} = 2.5\text{ mg/mL}. Converting to mg/dL\text{mg/dL}: 2.5 mg/mL×100 mL/dL=250 mg/dL2.5\text{ mg/mL} \times 100\text{ mL/dL} = 250\text{ mg/dL}.

02

A patient with a normal GFR\text{GFR} of 120 mL/min120\text{ mL/min} and Tm=300 mg/minT_m = 300\text{ mg/min} has a plasma glucose level of 350 mg/dL350\text{ mg/dL}. Calculate (a) the renal threshold in mg/dL\text{mg/dL} and (b) the urinary glucose excretion rate in mg/min\text{mg/min}.

Answer

(a) [glucose]threshold=300120=2.5 mg/mL=250 mg/dL[\text{glucose}]_{\text{threshold}} = \frac{300}{120} = 2.5\text{ mg/mL} = 250\text{ mg/dL}. (b) Plasma glucose =3.5 mg/mL= 3.5\text{ mg/mL}. Filtered Load=120 mL/min×3.5 mg/mL=420 mg/min\text{Filtered Load} = 120\text{ mL/min} \times 3.5\text{ mg/mL} = 420\text{ mg/min}. Since 420>300420 > 300, Excretion Rate=420−300=120 mg/min\text{Excretion Rate} = 420 - 300 = 120\text{ mg/min}.

03

During pregnancy, a patient's GFR\text{GFR} increases by 25%25\% to 150 mL/min150\text{ mL/min}, while her glucose TmT_m remains unchanged at 300 mg/min300\text{ mg/min}. (a) Calculate her new renal threshold in mg/dL\text{mg/dL}. (b) If her non-fasting plasma glucose reaches 220 mg/dL220\text{ mg/dL}, what is her urinary glucose excretion rate in mg/min\text{mg/min}?

Answer

(a) [glucose]threshold=300 mg/min150 mL/min=2.0 mg/mL=200 mg/dL[\text{glucose}]_{\text{threshold}} = \frac{300\text{ mg/min}}{150\text{ mL/min}} = 2.0\text{ mg/mL} = 200\text{ mg/dL}. (b) [glucose]=2.2 mg/mL[\text{glucose}] = 2.2\text{ mg/mL}. Filtered Load=150 mL/min×2.2 mg/mL=330 mg/min\text{Filtered Load} = 150\text{ mL/min} \times 2.2\text{ mg/mL} = 330\text{ mg/min}. Excretion Rate=330−300=30 mg/min\text{Excretion Rate} = 330 - 300 = 30\text{ mg/min}.

Loading workspace…