Resources

A thermophilic DNA polymerase has an optimum catalytic temperature of 72∘C72^\circ\text{C}. Between 40∘C40^\circ\text{C} and 70∘C70^\circ\text{C}, the reaction rate exhibits a temperature coefficient Q10=2.00Q_{10} = 2.00. If the reaction rate at the lower baseline temperature of 42∘C42^\circ\text{C} is v42=15.0 nmol/minv_{42} = 15.0\text{ nmol}/\text{min}, calculate the theoretical reaction rate v72v_{72} (in nmol/min\text{nmol}/\text{min}) at the optimum temperature threshold of 72∘C72^\circ\text{C} before thermal denaturation occurs.

Answer and steps

Final answer

v72=120 nmol/minv_{72} = 120\text{ nmol}/\text{min}

Steps

Understanding the Temperature Coefficient (Q10Q_{10})

The temperature coefficient, Q10Q_{10}, quantifies the factor by which an enzyme-catalyzed reaction rate increases with a 10∘C10^\circ\text{C} rise in temperature, assuming the enzyme remains within its functional temperature range below denaturation:

Q10=(v2v1)10T2−T1Q_{10} = \left(\frac{v_2}{v_1}\right)^{\frac{10}{T_2 - T_1}}

Rearranging this relationship to solve for the reaction rate v2v_2 at the higher temperature T2T_2 gives:

v2=v1⋅Q10T2−T110v_2 = v_1 \cdot Q_{10}^{\frac{T_2 - T_1}{10}}


Step-by-Step Calculation

  1. Determine the temperature difference (ΔT\Delta T): ΔT=T2−T1=72∘C−42∘C=30∘C\Delta T = T_2 - T_1 = 72^\circ\text{C} - 42^\circ\text{C} = 30^\circ\text{C}
  2. Calculate the number of 10∘C10^\circ\text{C} intervals: ΔT10=30∘C10∘C=3\frac{\Delta T}{10} = \frac{30^\circ\text{C}}{10^\circ\text{C}} = 3

    This represents three successive 10∘C10^\circ\text{C} increases (from 42∘C→52∘C→62∘C→72∘C42^\circ\text{C} \to 52^\circ\text{C} \to 62^\circ\text{C} \to 72^\circ\text{C}).

  3. Compute the total rate fold-increase: Since Q10=2.00Q_{10} = 2.00, the reaction rate doubles for each 10∘C10^\circ\text{C} increment: Q103=2.003=8Q_{10}^3 = 2.00^3 = 8
  4. Calculate the final reaction rate (v72v_{72}): v72=v42⋅8=15.0 nmol/min⋅8=120 nmol/minv_{72} = v_{42} \cdot 8 = 15.0\text{ nmol/min} \cdot 8 = 120\text{ nmol/min}

Common Pitfall to Avoid

A frequent mistake is applying an arithmetic (linear) increase rather than a geometric (exponential) increase. Adding 3×2=63 \times 2 = 6 or treating the rate as v42×3×2v_{42} \times 3 \times 2 fails to account for compounding: each 10∘C10^\circ\text{C} increase doubles the already elevated rate of the preceding temperature, leading to (2.00)3=8(2.00)^3 = 8-fold multiplication rather than an additive adjustment.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the temperature coefficient Q₁₀ as a linear multiplier for each 10°C interval rather than an exponential factor, multiplying by 3 × 2 instead of raising 2 to the power of 3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=72−42=30∘C  ⟹  Intervals=3010=3\Delta T = 72 - 42 = 30^\circ\text{C} \implies \text{Intervals} = \frac{30}{10} = 3

  2. Step 2

    v_{72} = 15.0 ×\times (3 ×\times 2.00) = 15.0 ×\times 6 = 90 nmol/min\text{ nmol/min}_

    Correct

    v_{72} = v_{42} ×\times Q_{10}^n = 15.0 ×\times 2.00^3 = 15.0 ×\times 8 = 120 nmol/min\text{ nmol/min}_

    Because Q10Q_{10} represents a fold-increase that compounds across each interval, you need to raise Q10Q_{10} to the power of the number of intervals (2.003=82.00^3 = 8) rather than multiplying (3×2.00=63 \times 2.00 = 6).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the net temperature difference of 30∘C30^\circ\text{C} between 42∘C42^\circ\text{C} and 72∘C72^\circ\text{C}.

You accurately determined that a 30∘C30^\circ\text{C} rise corresponds to 33 intervals of 10∘C10^\circ\text{C}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling instead of exponential scaling for Q10

You multiplied the number of intervals by Q10Q_{10} ((3×2.00)(3 \times 2.00)) instead of raising Q10Q_{10} to the power of the intervals (2.0032.00^3).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating linear additive rate increases with exponential compounding fold-changes. Each 10∘C10^\circ\text{C} increase doubles the rate achieved at the end of the previous 10∘C10^\circ\text{C} interval, producing a geometric series rather than a linear multiple.

REASONING PATH
Your ACEpath teacher’s suggested approach
$Q_{10}$ Definition and Formula
  • v2=v1⋅Q10ΔT10v_2 = v_1 \cdot Q_{10}^{\frac{\Delta T}{10}}

  • Always place the number of 10∘C10^\circ\text{C} intervals, n=ΔT10n = \frac{\Delta T}{10}, in the exponent of Q10Q_{10}.

Stepwise Compounding Check
  • Each 10∘C10^\circ\text{C} rise multiplies the preceding rate: v(T+10)=v(T)×Q10v(T + 10) = v(T) \times Q_{10}.

  • If unsure about the formula, chain the values step-by-step: 42∘C→52∘C42^\circ\text{C} \to 52^\circ\text{C} (15.0×2=3015.0 \times 2 = 30), 52∘C→62∘C52^\circ\text{C} \to 62^\circ\text{C} (30×2=6030 \times 2 = 60), 62∘C→72∘C62^\circ\text{C} \to 72^\circ\text{C} (60×2=12060 \times 2 = 120).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the exponent: n=ΔT10=3n = \frac{\Delta T}{10} = 3.

  2. Compute the compounding factor: Q10n=2.003=8Q_{10}^n = 2.00^3 = 8.

  3. Multiply the baseline rate by the total factor: v72=15.0 nmol/min×8=120 nmol/minv_{72} = 15.0\text{ nmol/min} \times 8 = 120\text{ nmol/min}.

Final answer

v_{72} = 120 nmol/min\text{ nmol/min}_

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exponential relationship in the Q10Q_{10} equation: v2=v1⋅Q10ΔT/10v_2 = v_1 \cdot Q_{10}^{\Delta T / 10}.

  • Practice writing out intermediate steps sequentially for temperature increments to reinforce exponential growth.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the Q₁₀ exponential relationship by multiplying the temperature difference directly in the exponent without dividing by 10.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=72−42=30∘C\Delta T = 72 - 42 = 30^\circ\text{C}

  2. Step 2

    v72=15.0×230v_{72} = 15.0 \times 2^{30}

    Correct

    v72=v42⋅Q10ΔT10=15.0⋅23010=15.0⋅23v_{72} = v_{42} \cdot Q_{10}^{\frac{\Delta T}{10}} = 15.0 \cdot 2^{\frac{30}{10}} = 15.0 \cdot 2^3

    The exponent in the Q10Q_{10} formula represents the number of 10∘C10^\circ\text{C} increments, which is ΔT10=3010=3\frac{\Delta T}{10} = \frac{30}{10} = 3, rather than the raw temperature change of 3030.

  3. Step 3

    v72=15.0×1073741824=1.61×1010 nmol/minv_{72} = 15.0 \times 1073741824 = 1.61 \times 10^{10}\text{ nmol/min}

    Correct

    v72=15.0⋅8=120 nmol/minv_{72} = 15.0 \cdot 8 = 120\text{ nmol/min}

    Your arithmetic evaluation of 15.0×23015.0 \times 2^{30} is consistent with your setup, but the resulting value is incorrect due to the exponent error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the baseline temperature and target temperature to find ΔT=30∘C\Delta T = 30^\circ\text{C}.

You correctly set up an exponential relationship using the given baseline velocity of 15.0 nmol/min15.0\text{ nmol/min} and base factor Q10=2.00Q_{10} = 2.00.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Exponent interval omission in Q10 calculation

You forgot to divide the temperature change ΔT\Delta T by 1010 in the exponent.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total temperature rise ΔT\Delta T with the number of 10∘C10^\circ\text{C} intervals (n=ΔT10n = \frac{\Delta T}{10}) that govern the Q10Q_{10} multiplier.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpret the Q10 exponent
  • Q10Q_{10} is the rate factor for every 10∘C10^\circ\text{C} increase, so the exponent must count the number of 10∘C10^\circ\text{C} blocks: n=T2−T110n = \frac{T_2 - T_1}{10}.

  • Always write the exponent as ΔT10\frac{\Delta T}{10} before computing power values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the number of 10∘C10^\circ\text{C} intervals: n=30∘C10∘C=3n = \frac{30^\circ\text{C}}{10^\circ\text{C}} = 3.

  2. Raise the Q10Q_{10} factor to this power: 2.003=82.00^3 = 8.

  3. Multiply by the baseline reaction rate: v72=15.0 nmol/min×8=120 nmol/minv_{72} = 15.0\text{ nmol/min} \times 8 = 120\text{ nmol/min}.

Final answer

v72=120 nmol/minv_{72} = 120\text{ nmol/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of the temperature coefficient Q10Q_{10} to remember that the base doubles only once every 10∘C10^\circ\text{C}, not every 1∘C1^\circ\text{C}.

  • Practice calculating non-integer and integer interval exponents ΔT10\frac{\Delta T}{10} across different enzymatic temperature ranges.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly calculates the temperature difference using the range minimum of 40°C instead of the given baseline measurement temperature of 42°C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=32∘C\Delta T = 32^\circ\text{C}

    Correct

    ΔT=T2−T1=72∘C−42∘C=30∘C\Delta T = T_2 - T_1 = 72^\circ\text{C} - 42^\circ\text{C} = 30^\circ\text{C}

    You calculated the temperature difference using the range minimum of 40∘C40^\circ\text{C} (72∘C−40∘C=32∘C72^\circ\text{C} - 40^\circ\text{C} = 32^\circ\text{C}) rather than the actual baseline temperature where the rate was measured (42∘C42^\circ\text{C}).

  2. Step 2

    Factor=2.003210=23.2≈9.19\text{Factor} = 2.00^{\frac{32}{10}} = 2^{3.2} \approx 9.19

    Correct

    Factor=Q10ΔT10=2.003010=23=8\text{Factor} = Q_{10}^{\frac{\Delta T}{10}} = 2.00^{\frac{30}{10}} = 2^3 = 8

    You correctly set up the exponential Q10Q_{10} factor formula, but your calculation carried forward the incorrect temperature interval from Step 1.

  3. Step 3

    v72=15.0×9.19=137.9 nmol/minv_{72} = 15.0 \times 9.19 = 137.9\text{ nmol/min}

    Correct

    v72=v42×8=15.0 nmol/min×8=120 nmol/minv_{72} = v_{42} \times 8 = 15.0\text{ nmol/min} \times 8 = 120\text{ nmol/min}

    You correctly multiplied the initial rate by your fold-increase factor, but the final value was affected by the earlier temperature difference error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the exponential temperature coefficient relationship v2=v1⋅Q10ΔT10v_2 = v_1 \cdot Q_{10}^{\frac{\Delta T}{10}}.

You correctly multiplied the baseline rate by your calculated factor to find the final reaction rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parameter substitution error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the validity domain of the constant (40∘C40^\circ\text{C} to 70∘C70^\circ\text{C}) with the actual initial state coordinate (T1=42∘CT_1 = 42^\circ\text{C}) where the baseline rate v1v_1 was measured.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Initial and Target State Pairs
  • Every rate v1v_1 belongs to a specific temperature T1T_1.

  • Always pair v1v_1 with its matching measurement temperature (T1=42∘CT_1 = 42^\circ\text{C}), and ignore contextual range boundaries that do not represent measured data points.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the true temperature interval between the measured baseline and the target: ΔT=72∘C−42∘C=30∘C\Delta T = 72^\circ\text{C} - 42^\circ\text{C} = 30^\circ\text{C}.

  2. Compute the fold-increase factor: Q103010=2.003=8Q_{10}^{\frac{30}{10}} = 2.00^3 = 8.

  3. Multiply the baseline rate by the fold factor: v72=15.0 nmol/min×8=120 nmol/minv_{72} = 15.0\text{ nmol/min} \times 8 = 120\text{ nmol/min}.

Final answer

v72=120 nmol/minv_{72} = 120\text{ nmol/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate the given data clearly into explicit pairs: (T1,v1)=(42∘C,15.0 nmol/min)(T_1, v_1) = (42^\circ\text{C}, 15.0\text{ nmol/min}) and (T2,v2)=(72∘C,?)(T_2, v_2) = (72^\circ\text{C}, ?).

  • Cross out contextual range specifications (e.g., 'Between 40∘C40^\circ\text{C} and 70∘C70^\circ\text{C}') once you confirm Q10Q_{10} applies, so they are not mistaken for calculation inputs.

Lock it in

Similar question

01

An enzyme has a reaction rate of 8.0 μmol/min8.0\,\mu\text{mol}/\text{min} at 15∘C15^\circ\text{C}. Assuming Q10=2.00Q_{10} = 2.00 over this range, what is the reaction rate at 35∘C35^\circ\text{C}?

Answer

32 μmol/min32\,\mu\text{mol}/\text{min}. The temperature increases by ΔT=35∘C−15∘C=20∘C\Delta T = 35^\circ\text{C} - 15^\circ\text{C} = 20^\circ\text{C}, which is 22 intervals of 10∘C10^\circ\text{C}. The rate increases by a factor of Q102=2.002=4Q_{10}^2 = 2.00^2 = 4. Multiplying by the baseline gives 8.0×4=32 μmol/min8.0 \times 4 = 32\,\mu\text{mol}/\text{min}.

02

Cellular respiration in a poikilotherm occurs at a rate of 2.5 mL O2/h2.5\text{ mL } \text{O}_2/\text{h} at 10∘C10^\circ\text{C}. If Q10=2.50Q_{10} = 2.50, calculate the metabolic rate at 30∘C30^\circ\text{C}.

Answer

15.625 mL O2/h15.625\text{ mL } \text{O}_2/\text{h} (or ≈15.6 mL O2/h\approx 15.6\text{ mL } \text{O}_2/\text{h}). Here ΔT=20∘C\Delta T = 20^\circ\text{C}, which equals 22 intervals. The fold increase is Q102=2.502=6.25Q_{10}^2 = 2.50^2 = 6.25. Therefore, the rate at 30∘C30^\circ\text{C} is 2.5×6.25=15.625 mL O2/h2.5 \times 6.25 = 15.625\text{ mL } \text{O}_2/\text{h}.

03

A soil enzyme catalyzes substrate turnover at 10.0 nmol/s10.0\text{ nmol}/\text{s} at 15∘C15^\circ\text{C} and 33.75 nmol/s33.75\text{ nmol}/\text{s} at 30∘C30^\circ\text{C}. Calculate the Q10Q_{10} value for this enzyme over this temperature range.

Answer

Q10=2.25Q_{10} = 2.25 (or 1.51.5≈2.251.5^{1.5} \approx 2.25). The temperature increase is ΔT=15∘C\Delta T = 15^\circ\text{C}, so the number of intervals is n=15/10=1.5n = 15/10 = 1.5. Using v2/v1=Q101.5v_2 / v_1 = Q_{10}^{1.5}, we have 33.75/10.0=3.37533.75 / 10.0 = 3.375. Solving Q10=3.3751/1.5=3.3752/3=(1.53)2/3=1.52=2.25Q_{10} = 3.375^{1/1.5} = 3.375^{2/3} = (1.5^3)^{2/3} = 1.5^2 = 2.25.

Loading workspace…