Resources

A solid tumor spheroid relies on uncontrolled cell cycle progression driven by an amplified oncogene (MYC\textit{MYC}) coupled with diffusive metabolic mass transport. The total cellular doubling time is Td=36.0 hT_d = 36.0\text{ h}. Oxygen diffuses radially inward through the spherical tumor mass with an effective diffusion coefficient of D=1.80×10−5 cm2/sD = 1.80 \times 10^{-5}\text{ cm}^2/\text{s}, and is consumed by rapidly dividing tumor cells at a zero-order volumetric rate of R=2.50×10−7 mol/(cm3⋅s)R = 2.50 \times 10^{-7}\text{ mol}/(\text{cm}^3\cdot\text{s}). The oxygen concentration at the outer viable boundary of the spheroid (r=Rtumorr = R_{\text{tumor}}) is maintained at C0=1.00×10−7 mol/cm3C_0 = 1.00 \times 10^{-7}\text{ mol}/\text{cm}^3. The critical threshold boundary where severe hypoxia induces cell death (forming a necrotic core) is C=0 mol/cm3C = 0\text{ mol}/\text{cm}^3. Using the steady-state diffusion-reaction equation ΔC=R6D(Rtumor2−rc2)\Delta C = \frac{R}{6D} (R_{\text{tumor}}^2 - r_c^2), calculate the critical outer radius RtumorR_{\text{tumor}} in micrometers (μm\mu\text{m}) at which the center (rc=0r_c = 0) first drops to C=0C = 0, and calculate the total number of cells in this non-necrotic spheroid assuming a spherical cell packing density of ρ=1.05×109 cells/cm3\rho = 1.05 \times 10^9\text{ cells}/\text{cm}^3.

Answer and steps

Final answer

Critical radius Rtumor=208μmR_{\text{tumor}} = 208\mu\text{m}; total viable cell count =3.96×104 cells= 3.96 \times 10^4\text{ cells}.

Steps

01

Calculate the Critical Spheroid Radius (RtumorR_{\text{tumor}})

Biological Context: Diffusion Limitations in Uncontrolled Cell Proliferation

In early-stage avascular tumors, oncogene amplification (such as MYC\textit{MYC}) drives continuous, unregulated cell division independent of normal growth-inhibitory signals. However, because the tumor lacks a microvascular network, it relies solely on the inward passive diffusion of oxygen and nutrients from surrounding interstitial fluid. Rapid metabolic consumption by densely packed, proliferating cells creates a steep radial concentration gradient. When the tumor exceeds a critical radius, oxygen cannot reach the center, leading to severe hypoxia and the formation of a central necrotic core.

The steady-state radial diffusion-reaction profile within a sphere consuming oxygen at a constant rate RR is given by:

ΔC=C(Rtumor)−C(rc)=R6D(Rtumor2−rc2)\Delta C = C(R_{\text{tumor}}) - C(r_c) = \frac{R}{6D} \left(R_{\text{tumor}}^2 - r_c^2\right)

At the point where the spheroid center (rc=0r_c = 0) first reaches anoxia (C=0 mol/cm3C = 0\text{ mol/cm}^3):

  • Surface concentration: C(Rtumor)=C0=1.00×10−7 mol/cm3C(R_{\text{tumor}}) = C_0 = 1.00 \times 10^{-7}\text{ mol/cm}^3
  • Core concentration: C(0)=0 mol/cm3C(0) = 0\text{ mol/cm}^3
  • Concentration difference: ΔC=C0−0=1.00×10−7 mol/cm3\Delta C = C_0 - 0 = 1.00 \times 10^{-7}\text{ mol/cm}^3

Rearranging the expression to solve for Rtumor2R_{\text{tumor}}^2:

Rtumor2=6D⋅ΔCRR_{\text{tumor}}^2 = \frac{6D \cdot \Delta C}{R}

Substitute the given biophysical parameters into the equation:

Rtumor2=6⋅(1.80×10−5 cm2/s)⋅(1.00×10−7 mol/cm3)2.50×10−7 mol/(cm3⋅s)=4.32×10−4 cm2R_{\text{tumor}}^2 = \frac{6 \cdot (1.80 \times 10^{-5}\text{ cm}^2/\text{s}) \cdot (1.00 \times 10^{-7}\text{ mol/cm}^3)}{2.50 \times 10^{-7}\text{ mol}/(\text{cm}^3\cdot\text{s})} = 4.32 \times 10^{-4}\text{ cm}^2

Taking the square root yields the critical radius:

Rtumor=4.32×10−4 cm2≈2.08×10−2 cmR_{\text{tumor}} = \sqrt{4.32 \times 10^{-4}\text{ cm}^2} \approx 2.08 \times 10^{-2}\text{ cm}

Convert centimeters to micrometers (1 cm=104 μm1\text{ cm} = 10^4\ \mu\text{m}):

Rtumor=2.08×10−2×104 μm=208 μmR_{\text{tumor}} = 2.08 \times 10^{-2} \times 10^4\ \mu\text{m} = 208\ \mu\text{m}


02

Calculate the Total Viable Cell Count

Assuming a spherical geometry, calculate the total volume of the tumor mass at this critical stage:

V=43πRtumor3=43π(2.08×10−2 cm)3≈3.77×10−5 cm3V = \frac{4}{3}\pi R_{\text{tumor}}^3 = \frac{4}{3}\pi (2.08 \times 10^{-2}\text{ cm})^3 \approx 3.77 \times 10^{-5}\text{ cm}^3

Using the cellular packing density ρ=1.05×109 cells/cm3\rho = 1.05 \times 10^9\text{ cells/cm}^3, the total number of cells in the spheroid is:

N=ρ⋅V=(1.05×109 cells/cm3)⋅(3.77×10−5 cm3)≈3.96×104 cellsN = \rho \cdot V = (1.05 \times 10^9\text{ cells/cm}^3) \cdot (3.77 \times 10^{-5}\text{ cm}^3) \approx 3.96 \times 10^4\text{ cells}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 6 in the denominator of the spherical diffusion-reaction equation, using R/(D) instead of R/(6D), leading to an underestimated tumor radius and cell count.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔC=(RD)∗Rtumor2  ⟹  Rtumor2=D∗C0R=(1.80×10−5)∗(1.00×10−7)(2.50×10−7)=7.20×10−6 cm2\Delta C = \left(\frac{R}{D}\right) * R_{\text{tumor}}^2 \implies R_{\text{tumor}}^2 = \frac{D * C_0}{R} = \frac{(1.80 \times 10^{-5}) * (1.00 \times 10^{-7})}{(2.50 \times 10^{-7})} = 7.20 \times 10^{-6}\text{ cm}^2

    Correct

    ΔC=R6DRtumor2  ⟹  Rtumor2=6D⋅C0R=6⋅(1.80×10−5 cm2/s)⋅(1.00×10−7 mol/cm3)2.50×10−7 mol/(cm3⋅s)=4.32×10−4 cm2\Delta C = \frac{R}{6D} R_{\text{tumor}}^2 \implies R_{\text{tumor}}^2 = \frac{6D \cdot C_0}{R} = \frac{6 \cdot (1.80 \times 10^{-5}\text{ cm}^2/\text{s}) \cdot (1.00 \times 10^{-7}\text{ mol}/\text{cm}^3)}{2.50 \times 10^{-7}\text{ mol}/(\text{cm}^3\cdot\text{s})} = 4.32 \times 10^{-4}\text{ cm}^2

    You omitted the factor of 66 in the denominator of the spherical diffusion-reaction equation ΔC=R6D(Rtumor2−rc2)\Delta C = \frac{R}{6D}(R_{\text{tumor}}^2 - r_c^2). For spherical radial diffusion, the Laplacian operator introduces the constant 66, making Rtumor2=6DΔCRR_{\text{tumor}}^2 = \frac{6D \Delta C}{R} rather than DΔCR\frac{D \Delta C}{R}.

  2. Step 2

    Rtumor=7.20×10−6 cm≈2.683×10−3 cm=26.8 μmR_{\text{tumor}} = \sqrt{7.20 \times 10^{-6}\text{ cm}} \approx 2.683 \times 10^{-3}\text{ cm} = 26.8\ \mu\text{m}

    Correct

    Rtumor=4.32×10−4 cm2≈2.08×10−2 cm=208 μmR_{\text{tumor}} = \sqrt{4.32 \times 10^{-4}\text{ cm}^2} \approx 2.08 \times 10^{-2}\text{ cm} = 208\ \mu\text{m}

    Your square-root calculation and unit conversion to micrometers were executed correctly, but the result inherited the missing factor of 66 from Step 1.

  3. Step 3

    V=43∗π∗(2.683×10−3 cm)3≈8.089×10−8 cm3  ⟹  N=ρ∗V=(1.05×109)∗(8.089×10−8)≈85 cellsV = \frac{4}{3} * \pi * (2.683 \times 10^{-3}\text{ cm})^3 \approx 8.089 \times 10^{-8}\text{ cm}^3 \implies N = \rho * V = (1.05 \times 10^9) * (8.089 \times 10^{-8}) \approx 85\text{ cells}

    Correct

    V=43π(2.08×10−2 cm)3≈3.77×10−5 cm3  ⟹  N=ρV=(1.05×109 cells/cm3)(3.77×10−5 cm3)≈3.96×104 cellsV = \frac{4}{3}\pi (2.08 \times 10^{-2}\text{ cm})^3 \approx 3.77 \times 10^{-5}\text{ cm}^3 \implies N = \rho V = (1.05 \times 10^9\text{ cells}/\text{cm}^3)(3.77 \times 10^{-5}\text{ cm}^3) \approx 3.96 \times 10^4\text{ cells}

    Your method of calculating spherical volume and multiplying by cell packing density was completely sound, but using the underestimated radius caused the final cell count to be severely underestimated.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the center condition rc=0r_c = 0 where oxygen drops to zero.

You properly applied the volume formula for a sphere, V=43πR3V = \frac{4}{3}\pi R^3.

You converted units accurately between centimeters and micrometers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted geometric coordinate factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You wrote the 1D Cartesian steady-state diffusion-reaction form ΔC=R2Dx2\Delta C = \frac{R}{2D} x^2 (or without any geometric denominator, RD\frac{R}{D}) instead of accounting for the factor of 66 that arises from integrating the radial Laplacian 1r2ddr(r2dCdr)=RD\frac{1}{r^2}\frac{d}{dr}(r^2\frac{dC}{dr}) = \frac{R}{D} in spherical coordinates.

REASONING PATH
Your ACEpath teacher’s suggested approach
Spherical Laplacian Constant
  • In spherical steady-state reaction-diffusion with uniform consumption, ∇2C=1r2ddr(r2dCdr)=RD\nabla^2 C = \frac{1}{r^2}\frac{d}{dr}\left(r^2\frac{dC}{dr}\right) = \frac{R}{D}, which integrates to ΔC=R6DR2\Delta C = \frac{R}{6D}R^2.

  • Check the coordinate geometry of your system: planar geometry yields a factor of 22, cylindrical yields 44, and spherical yields 66 in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the geometric factor of 66: Rtumor2=6DΔCR=6⋅(1.80×10−5)⋅(1.00×10−7)2.50×10−7=4.32×10−4 cm2R_{\text{tumor}}^2 = \frac{6 D \Delta C}{R} = \frac{6 \cdot (1.80 \times 10^{-5}) \cdot (1.00 \times 10^{-7})}{2.50 \times 10^{-7}} = 4.32 \times 10^{-4}\text{ cm}^2.

  2. Take the square root: Rtumor=4.32×10−4 cm2≈2.08×10−2 cm=208 μmR_{\text{tumor}} = \sqrt{4.32 \times 10^{-4}\text{ cm}^2} \approx 2.08 \times 10^{-2}\text{ cm} = 208\ \mu\text{m}.

  3. Compute the spherical volume: V=43π(2.08×10−2 cm)3≈3.77×10−5 cm3V = \frac{4}{3}\pi (2.08 \times 10^{-2}\text{ cm})^3 \approx 3.77 \times 10^{-5}\text{ cm}^3.

  4. Multiply by the packing density: N=(1.05×109 cells/cm3)⋅(3.77×10−5 cm3)≈3.96×104 cellsN = (1.05 \times 10^9\text{ cells}/\text{cm}^3) \cdot (3.77 \times 10^{-5}\text{ cm}^3) \approx 3.96 \times 10^4\text{ cells}.

Final answer

Rtumor=208 μmR_{\text{tumor}} = 208\ \mu\text{m}, total cell count =3.96×104 cells= 3.96 \times 10^4\text{ cells}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how coordinate dimensions (1D→21\text{D} \to 2, 2D cylinder→42\text{D} \text{ cylinder} \to 4, 3D sphere→63\text{D} \text{ sphere} \to 6) change the denominator of the diffusion-reaction equation.

  • Re-calculate the critical radius with the factor of 66 to see how the volume and cell count scale with R3R^3.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the calculated radius as the diameter and halves it to find the radius, drastically reducing the spheroid volume and cell count.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Rtumor2=6⋅D⋅C0/R=6⋅(1.80×10−5)⋅(1.00×10−7)/(2.50×10−7)=4.32×10−5 cm2  ⟹  Rtumor=4.32×10−5 cm≈65.7 μmR_{\text{tumor}}^2 = 6 \cdot D \cdot C_0 / R = 6 \cdot (1.80 \times 10^{-5}) \cdot (1.00 \times 10^{-7}) / (2.50 \times 10^{-7}) = 4.32 \times 10^{-5}\text{ cm}^2 \implies R_{\text{tumor}} = \sqrt{4.32 \times 10^{-5}}\text{ cm} \approx 65.7\ \mu\text{m}

  2. Step 2

    Radius=Rtumor/2=65.7/2=32.9 μm\text{Radius} = R_{\text{tumor}} / 2 = 65.7 / 2 = 32.9\ \mu\text{m}

    Correct

    Radius=Rtumor=208 μm\text{Radius} = R_{\text{tumor}} = 208\ \mu\text{m} (or 65.7 μm65.7\ \mu\text{m} from your evaluation)

    The variable RtumorR_{\text{tumor}} already represents the radius of the spherical tumor, not its diameter. You should not divide it by 22.

  3. Step 3

    V=43⋅π⋅(3.286×10−3 cm)3≈1.486×10−7 cm3  ⟹  N=ρ⋅V=(1.05×109)⋅(1.486×10−7)≈1.56×102 cellsV = \frac{4}{3} \cdot \pi \cdot (3.286 \times 10^{-3}\text{ cm})^3 \approx 1.486 \times 10^{-7}\text{ cm}^3 \implies N = \rho \cdot V = (1.05 \times 10^9) \cdot (1.486 \times 10^{-7}) \approx 1.56 \times 10^2\text{ cells}

    Correct

    V=43πRtumor3  ⟹  N=ρ⋅V≈3.96×104 cellsV = \frac{4}{3}\pi R_{\text{tumor}}^3 \implies N = \rho \cdot V \approx 3.96 \times 10^4\text{ cells}

    You applied the correct volume and cell count formulas, but the numerical result is too small because it propagated the halved radius from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated Rtumor2R_{\text{tumor}}^2 from the steady-state diffusion-reaction equation.

You correctly identified and applied the sphere volume formula V=43πr3V = \frac{4}{3}\pi r^3.

You accurately multiplied the volume by the cell packing density ρ\rho to determine the total cell count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. Diameter Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the radial coordinate RtumorR_{\text{tumor}} with the diameter of the tumor mass, leading you to divide an already radial quantity by 22 before computing the spherical volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Radial vs. Diametric Symbols
  • In spherical diffusion equations, radial coordinates (rr, RR, R0R_0) denote the distance from the center to the boundary (the radius), never the diameter.

  • Keep RtumorR_{\text{tumor}} directly as the radius rr when calculating the volume V=43πRtumor3V = \frac{4}{3}\pi R_{\text{tumor}}^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Keep the critical radius as Rtumor=208 μm=2.08×10−2 cmR_{\text{tumor}} = 208\ \mu\text{m} = 2.08 \times 10^{-2}\text{ cm} without dividing by 22.

  2. Calculate the full spheroid volume: V=43π(2.08×10−2 cm)3≈3.77×10−5 cm3V = \frac{4}{3}\pi (2.08 \times 10^{-2}\text{ cm})^3 \approx 3.77 \times 10^{-5}\text{ cm}^3.

  3. Compute the viable cell count: N=ρ⋅V=(1.05×109 cells/cm3)⋅(3.77×10−5 cm3)≈3.96×104 cellsN = \rho \cdot V = (1.05 \times 10^9\text{ cells}/\text{cm}^3) \cdot (3.77 \times 10^{-5}\text{ cm}^3) \approx 3.96 \times 10^4\text{ cells}.

Final answer

Critical radius Rtumor=208 μmR_{\text{tumor}} = 208\ \mu\text{m}; total viable cell count =3.96×104 cells= 3.96 \times 10^4\text{ cells}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review biophysical transport notation to ensure coordinates representing distance from the origin (rr) are never halved.

  • Recalculate tumor volume using the unhalved radius to observe how cubic scaling (r3r^3) restores the expected order of magnitude for cell count.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly calculates the volume using the formula for the surface area of a sphere or omits the cubic exponent on radius, treating volume as proportional to R².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔC=R6D∗Rtumor2  ⟹  Rtumor2=6∗(1.80×10−5)∗(1.00×10−7)2.50×10−7=4.32×10−5 cm2  ⟹  Rtumor=4.32×10−5 cm≈6.573×10−3 cm=65.7 μm\Delta C = \frac{R}{6D} * R_{\text{tumor}}^2 \implies R_{\text{tumor}}^2 = \frac{6 * (1.80 \times 10^{-5}) * (1.00 \times 10^{-7})}{2.50 \times 10^{-7}} = 4.32 \times 10^{-5}\text{ cm}^2 \implies R_{\text{tumor}} = \sqrt{4.32 \times 10^{-5}\text{ cm}} \approx 6.573 \times 10^{-3}\text{ cm} = 65.7\ \mu\text{m}

  2. Step 2

    V=43∗π∗Rtumor2=43∗π∗(6.573×10−3 cm)2≈1.810×10−4 cm3V = \frac{4}{3} * \pi * R_{\text{tumor}}^2 = \frac{4}{3} * \pi * (6.573 \times 10^{-3}\text{ cm})^2 \approx 1.810 \times 10^{-4}\text{ cm}^3

    Correct

    V=43πRtumor3=43π(6.573×10−3 cm)3≈1.19×10−6 cm3V = \frac{4}{3}\pi R_{\text{tumor}}^3 = \frac{4}{3}\pi (6.573 \times 10^{-3}\text{ cm})^3 \approx 1.19 \times 10^{-6}\text{ cm}^3

    You squared the radius instead of cubing it in the spherical volume formula. The volume of a sphere is V=43πR3V = \frac{4}{3}\pi R^3.

  3. Step 3

    N=ρ∗V=(1.05×109)∗(1.810×10−4)≈1.90×105 cellsN = \rho * V = (1.05 \times 10^9) * (1.810 \times 10^{-4}) \approx 1.90 \times 10^5\text{ cells}

    Correct

    N=ρV=(1.05×109 cells/cm3)⋅(1.19×10−6 cm3)≈1.25×103 cellsN = \rho V = (1.05 \times 10^9\text{ cells/cm}^3) \cdot (1.19 \times 10^{-6}\text{ cm}^3) \approx 1.25 \times 10^3\text{ cells}

    Your relationship N=ρVN = \rho V is correct, but the calculated cell count is inaccurate because it carries over the incorrect volume from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the radial diffusion-reaction boundary condition where rc=0r_c = 0 reaches C=0C = 0.

You successfully rearranged the formula to solve for the critical outer radius RtumorR_{\text{tumor}}.

You correctly recognized that total cell count is found by multiplying packing density by tumor volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Formula Error

You wrote V=43πR2V = \frac{4}{3}\pi R^2 instead of V=43πR3V = \frac{4}{3}\pi R^3 when calculating the tumor spheroid volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated two-dimensional area scaling (R2R^2) with three-dimensional volume scaling (R3R^3), leading to dimensional inconsistency and an inflated cell count.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Exponent for 3D Volume
  • Three-dimensional volume always scales with the cube of linear dimension: V=43πR3V = \frac{4}{3}\pi R^3.

  • Inspect the exponent on RR before evaluating numerical powers to ensure it is 33, not 22.

Dimensional Consistency Check
  • Multiplying an area (extcm2 ext{cm}^2) by a volumetric density (extcells/cm3 ext{cells}/\text{cm}^3) yields cells/cm\text{cells}/\text{cm}, not total cells.

  • Confirm that your calculated volume has true cubic units (cm3\text{cm}^3) by checking that RR was cubed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the spheroid volume using the cubic radius: V=43πRtumor3=43π(6.573×10−3 cm)3≈1.19×10−6 cm3V = \frac{4}{3}\pi R_{\text{tumor}}^3 = \frac{4}{3}\pi (6.573 \times 10^{-3}\text{ cm})^3 \approx 1.19 \times 10^{-6}\text{ cm}^3 (or V≈3.77×10−5 cm3V \approx 3.77 \times 10^{-5}\text{ cm}^3 if using the textbook reference value Rtumor=208 μmR_{\text{tumor}} = 208\ \mu\text{m}).

  2. Multiply by the cellular packing density: N=ρV=(1.05×109 cells/cm3)⋅(1.19×10−6 cm3)≈1.25×103 cellsN = \rho V = (1.05 \times 10^9\text{ cells/cm}^3) \cdot (1.19 \times 10^{-6}\text{ cm}^3) \approx 1.25 \times 10^3\text{ cells} (or 3.96×104 cells3.96 \times 10^4\text{ cells} with the reference radius).

Final answer

Critical radius Rtumor≈65.7 μmR_{\text{tumor}} \approx 65.7\ \mu\text{m} (reference: 208 μm208\ \mu\text{m}); total viable cell count N≈1.25×103 cellsN \approx 1.25 \times 10^3\text{ cells} (reference: 3.96×104 cells3.96 \times 10^4\text{ cells}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric formulas for spheres, contrasting surface area (A=4πR2A = 4\pi R^2) with volume (V=43πR3V = \frac{4}{3}\pi R^3).

  • Practice checking physical dimensions at every step to catch unit and power mismatches early.

Lock it in

Similar question

01

An avascular tumor spheroid has surface oxygen concentration C0=1.20×10−7 mol/cm3C_0 = 1.20 \times 10^{-7}\text{ mol}/\text{cm}^3, consumption rate R=3.00×10−7 mol/(cm3⋅s)R = 3.00 \times 10^{-7}\text{ mol}/(\text{cm}^3\cdot\text{s}), and diffusion coefficient D=2.00×10−5 cm2/sD = 2.00 \times 10^{-5}\text{ cm}^2/\text{s}. Find the critical outer radius RtumorR_{\text{tumor}} (in μm\mu\text{m}) at which the center reaches C=0C = 0.

Answer

Rtumor=219 μmR_{\text{tumor}} = 219\ \mu\text{m}. Key steps: Rtumor2=6DC0R=6(2.00×10−5)(1.20×10−7)3.00×10−7=4.80×10−4 cm2  ⟹  Rtumor=4.80×10−4=0.0219 cm=219 μmR_{\text{tumor}}^2 = \frac{6 D C_0}{R} = \frac{6(2.00 \times 10^{-5})(1.20 \times 10^{-7})}{3.00 \times 10^{-7}} = 4.80 \times 10^{-4}\text{ cm}^2 \implies R_{\text{tumor}} = \sqrt{4.80 \times 10^{-4}} = 0.0219\text{ cm} = 219\ \mu\text{m}.

02

Using the spheroid from the previous exercise (Rtumor=219 μmR_{\text{tumor}} = 219\ \mu\text{m}), calculate the viable cell count if the cell density is ρ=1.20×109 cells/cm3\rho = 1.20 \times 10^9\text{ cells}/\text{cm}^3.

Answer

N≈5.27×104 cellsN \approx 5.27 \times 10^4\text{ cells}. Key steps: V=43π(0.0219 cm)3≈4.39×10−5 cm3V = \frac{4}{3}\pi (0.0219\text{ cm})^3 \approx 4.39 \times 10^{-5}\text{ cm}^3. N=ρV=(1.20×109)(4.39×10−5)≈5.27×104 cellsN = \rho V = (1.20 \times 10^9)(4.39 \times 10^{-5}) \approx 5.27 \times 10^4\text{ cells}.

03

A cylindrical micro-tissue cord (in 2D radial geometry, ΔC=R4DRcord2\Delta C = \frac{R}{4D} R_{\text{cord}}^2) has C0=8.00×10−8 mol/cm3C_0 = 8.00 \times 10^{-8}\text{ mol}/\text{cm}^3, D=1.50×10−5 cm2/sD = 1.50 \times 10^{-5}\text{ cm}^2/\text{s}, and R=2.00×10−7 mol/(cm3⋅s)R = 2.00 \times 10^{-7}\text{ mol}/(\text{cm}^3\cdot\text{s}). Calculate the maximum cord radius RcordR_{\text{cord}} (in μm\mu\text{m}) before the center becomes anoxic (C=0C=0).

Answer

Rcord=155 μmR_{\text{cord}} = 155\ \mu\text{m}. Key steps: Rcord2=4DC0R=4(1.50×10−5)(8.00×10−8)2.00×10−7=2.40×10−4 cm2  ⟹  Rcord=2.40×10−4≈0.0155 cm=155 μmR_{\text{cord}}^2 = \frac{4 D C_0}{R} = \frac{4(1.50 \times 10^{-5})(8.00 \times 10^{-8})}{2.00 \times 10^{-7}} = 2.40 \times 10^{-4}\text{ cm}^2 \implies R_{\text{cord}} = \sqrt{2.40 \times 10^{-4}} \approx 0.0155\text{ cm} = 155\ \mu\text{m}.

Loading workspace…