Resources

A developmental biologist studies dorsal closure in Drosophila embryos, where the velocity of leading-edge cell contraction vv (in nm/s\text{nm/s}) depends linearly on the expression level of the non-muscle myosin heavy chain gene zipper (zipzip, denoted as EzipE_{zip} in normalized units) according to the relation v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20. Following a targeted CRISPR activation screen, an embryo exhibits an accelerated leading-edge contraction velocity of 25.0 nm/s25.0\text{ nm/s}. Determine the relative expression level of zipper (EzipE_{zip}) in this engineered embryo.

Answer and steps

Final answer

13.013.0

Steps

01

Identify the given linear relationship and known values

The contraction velocity of leading-edge cells, vv, relates directly to the normalized expression level of the non-muscle myosin gene zipper, EzipE_{zip}, by the linear model: v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20

From the problem statement, the observed velocity in the CRISPR-activated embryo is: v=25.0 nm/sv = 25.0\text{ nm/s}

02

Substitute the known velocity into the equation

Substitute v=25.0 nm/sv = 25.0\text{ nm/s} into the equation: 25.0=1.60⋅Ezip+4.2025.0 = 1.60 \cdot E_{zip} + 4.20

03

Solve for the relative expression level EzipE_{zip}

Isolate the term containing EzipE_{zip} by subtracting the baseline velocity (4.20 nm/s4.20\text{ nm/s}) from both sides: 1.60⋅Ezip=25.0−4.201.60 \cdot E_{zip} = 25.0 - 4.20 1.60⋅Ezip=20.801.60 \cdot E_{zip} = 20.80

Now, divide both sides by the slope coefficient (1.601.60): Ezip=20.801.60=13.0E_{zip} = \frac{20.80}{1.60} = 13.0

Common Pitfall to Avoid

A frequent error is dividing the measured velocity directly by the rate coefficient without first subtracting the constant term (4.20 nm/s4.20\text{ nm/s}). The constant represents the baseline contraction velocity independent of additional zipper transcription; ignoring it leads to an overestimation of gene expression.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the baseline intercept instead of subtracting it when rearranging the linear equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=1.60⋅Ezip+4.20  ⟹  25.0=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20 \implies 25.0 = 1.60 \cdot E_{zip} + 4.20

  2. Step 2

    1.60⋅Ezip=25.0+4.20  ⟹  1.60⋅Ezip=29.21.60 \cdot E_{zip} = 25.0 + 4.20 \implies 1.60 \cdot E_{zip} = 29.2

    Correct

    1.60⋅Ezip=25.0−4.20  ⟹  1.60⋅Ezip=20.801.60 \cdot E_{zip} = 25.0 - 4.20 \implies 1.60 \cdot E_{zip} = 20.80

    To isolate the term with EzipE_{zip}, you need to apply the inverse operation by subtracting the constant 4.204.20 from both sides of the equation rather than adding it.

  3. Step 3

    Ezip=29.2/1.60=18.25E_{zip} = 29.2 / 1.60 = 18.25

    Correct

    Ezip=20.801.60=13.0E_{zip} = \frac{20.80}{1.60} = 13.0

    Your division step correctly follows your previous line, but the result is affected by adding 4.204.20 in the rearrangement step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the linear model relating contraction velocity to zipper expression.

You accurately substituted the given velocity value into the equation.

You correctly applied division to isolate the variable from its coefficient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inversion error when isolating linear terms

You accidentally added the baseline value of 4.204.20 to 25.025.0 instead of subtracting it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When rearranging a linear relationship of the form y=mx+by = mx + b to solve for xx, moving the positive intercept term bb to the other side requires subtraction (y−b=mxy - b = mx), because subtraction is the inverse operation of addition.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the operation linking the constant
  • In y=mx+by = mx + b, the constant bb is added to mxmx.

  • Check the sign in front of the constant term before moving it across the equals sign.

Apply inverse operations
  • To eliminate +b+b from one side of an equation, subtract bb from both sides.

  • Write out the subtraction explicitly: y−b=mxy - b = mx.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from 25.0=1.60⋅Ezip+4.2025.0 = 1.60 \cdot E_{zip} + 4.20.

  2. Subtract 4.204.20 from both sides: 1.60⋅Ezip=25.0−4.20=20.801.60 \cdot E_{zip} = 25.0 - 4.20 = 20.80.

  3. Divide both sides by 1.601.60: Ezip=20.801.60=13.0E_{zip} = \frac{20.80}{1.60} = 13.0.

Final answer

13.013.0

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables in two-step linear equations by always writing out the inverse operation on both sides.

  • Check whether your calculated expression level makes physical sense by plugging it back into the forward equation: 1.60(13.0)+4.20=20.8+4.2=25.01.60(13.0) + 4.20 = 20.8 + 4.2 = 25.0.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the baseline intercept of the linear model and treats velocity as directly proportional to expression level.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=1.60⋅Ezip  ⟹  25.0=1.60⋅Ezipv = 1.60 \cdot E_{zip} \implies 25.0 = 1.60 \cdot E_{zip}

    Correct

    v=1.60⋅Ezip+4.20  ⟹  25.0=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20 \implies 25.0 = 1.60 \cdot E_{zip} + 4.20

    You omitted the constant baseline term +4.20+4.20 from the model equation when setting up the substitution.

  2. Step 2

    Ezip=25.01.60  ⟹  Ezip=15.625E_{zip} = \frac{25.0}{1.60} \implies E_{zip} = 15.625

    Correct

    1.60⋅Ezip=25.0−4.20=20.80  ⟹  Ezip=20.801.60=13.01.60 \cdot E_{zip} = 25.0 - 4.20 = 20.80 \implies E_{zip} = \frac{20.80}{1.60} = 13.0

    Your division 25.01.60=15.625\frac{25.0}{1.60} = 15.625 follows correctly from your setup in Step 1, but it yields an incorrect result because the baseline velocity was never subtracted.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and substituted the observed contraction velocity v=25.0 nm/sv = 25.0\text{ nm/s}.

You performed the algebraic isolation and division accurately based on your written equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of linear model constant term

You dropped the +4.20+4.20 constant when transcribing the linear model v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating a linear relationship with a non-zero intercept (y=mx+by = mx + b) as a direct variation (y=mxy = mx), overlooking the baseline biological activity independent of the target gene's expression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for baseline values in linear biological models
  • In an affine linear model y=mx+by = mx + b, the intercept bb represents the baseline output when x=0x = 0. You must subtract bb before dividing by mm.

  • Always transcribe the full equation including any constant terms, then subtract the constant term from both sides before dividing by the rate coefficient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write out the complete linear model given in the problem: v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20.

  2. Substitute the measured contraction velocity v=25.0 nm/sv = 25.0\text{ nm/s}: 25.0=1.60⋅Ezip+4.2025.0 = 1.60 \cdot E_{zip} + 4.20.

  3. Subtract the baseline velocity 4.20 nm/s4.20\text{ nm/s} from both sides: 1.60⋅Ezip=25.0−4.20=20.801.60 \cdot E_{zip} = 25.0 - 4.20 = 20.80.

  4. Divide by the rate constant 1.601.60: Ezip=20.801.60=13.0E_{zip} = \frac{20.80}{1.60} = 13.0.

Final answer

13.013.0

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that you transcribe every term of a formula from the problem prompt before substituting values.

  • Remember that biological processes often have a non-zero baseline activity (yy-intercept) that must be subtracted before calculating expression fold-changes.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the dependent and independent variables and substitutes 25.0 in place of E_zip instead of v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20

  2. Step 2

    Ezip=1.60⋅25.0+4.20E_{zip} = 1.60 \cdot 25.0 + 4.20

    Correct

    25.0=1.60⋅Ezip+4.2025.0 = 1.60 \cdot E_{zip} + 4.20

    The value 25.0 nm/s25.0\text{ nm/s} is the measured velocity vv, not the relative expression level EzipE_{zip}. You swapped the dependent and independent variables during substitution.

  3. Step 3

    Ezip=40.0+4.20  ⟹  Ezip=44.2E_{zip} = 40.0 + 4.20 \implies E_{zip} = 44.2

    Correct

    1.60⋅Ezip=25.0−4.20  ⟹  Ezip=20.801.60=13.01.60 \cdot E_{zip} = 25.0 - 4.20 \implies E_{zip} = \frac{20.80}{1.60} = 13.0

    Although your arithmetic was carried out correctly for the substituted expression, your final value is incorrect because it stems from the inverted substitution in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the governing linear equation relating velocity and gene expression level.

You carried out the arithmetic operations accurately according to the equation you set up.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable Misidentification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the measured output (velocity vv) as the input variable (EzipE_{zip}), evaluating the function forward rather than solving the linear equation backward for the unknown input.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Units to Variables
  • Every numerical value given in an applied biological model corresponds to a specific variable defined by its units and biological meaning.

  • Check the units of the given measurement (25.0 nm/s25.0\text{ nm/s}) against the model variables: velocity vv is measured in nm/s\text{nm/s}, while EzipE_{zip} is normalized expression, so substitute 25.025.0 for vv.

Solve for the Unknown
  • When given an output yy in y=mx+by = mx + b, isolate the input xx by subtracting bb and dividing by mm, rather than evaluating my+bm y + b.

  • Subtract the baseline intercept 4.204.20 from 25.025.0 first, then divide the remaining 20.8020.80 by 1.601.60.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute v=25.0v = 25.0 into v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20: 25.0=1.60⋅Ezip+4.2025.0 = 1.60 \cdot E_{zip} + 4.20

  2. Subtract the basal velocity 4.204.20 from both sides: 1.60⋅Ezip=25.0−4.20=20.801.60 \cdot E_{zip} = 25.0 - 4.20 = 20.80

  3. Divide by the rate coefficient 1.601.60: Ezip=20.801.60=13.0E_{zip} = \frac{20.80}{1.60} = 13.0

Final answer

13.013.0

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing numbers down, write a brief 'Given' list mapping each number with its units directly to its variable symbol.

  • Check whether you are asked to compute an outcome (evaluate yy) or deduce an underlying biological cause (solve for xx).

Lock it in

Similar question

01

In a mutant embryo, the leading-edge closure rate is 17.0 nm/s17.0\text{ nm/s}. Using the same linear relationship v=1.60⋅Ezip+4.20v = 1.60 \cdot E_{zip} + 4.20, calculate the relative expression level EzipE_{zip}.

Answer

Ezip=8.0E_{zip} = 8.0. Subtract the baseline velocity: 17.0−4.20=12.8017.0 - 4.20 = 12.80. Then divide by the slope: Ezip=12.801.60=8.0E_{zip} = \frac{12.80}{1.60} = 8.0.

02

A reporter gene assay measures fluorescence intensity II as a function of transcription factor concentration [TF][TF] according to I=3.50⋅[TF]+10.5I = 3.50 \cdot [TF] + 10.5. If an engineered cell line displays an intensity of 42.0 arbitrary units42.0\text{ arbitrary units}, find [TF][TF].

Answer

[TF]=9.0[TF] = 9.0. Subtract the background intensity: 42.0−10.5=31.542.0 - 10.5 = 31.5. Divide by the sensitivity factor: [TF]=31.53.50=9.0[TF] = \frac{31.5}{3.50} = 9.0.

03

During cell migration, actin retrograde flow velocity uu depends on myosin motor density ρ\rho by u=0.75ρ+1.50u = 0.75\rho + 1.50. An inhibitor reduces flow velocity to 3.60 \mum/min3.60\text{ \mu m/min}, while an untreated control has ρ=6.0\rho = 6.0. By what factor was the active motor density ρ\rho reduced in the treated cells?

Answer

Reduced by a factor of 2.142.14 (or to 46.7%46.7\% of control). For treated cells: 0.75ρ=3.60−1.50=2.100.75\rho = 3.60 - 1.50 = 2.10, so ρtreated=2.100.75=2.80\rho_{\text{treated}} = \frac{2.10}{0.75} = 2.80. The reduction factor is ρcontrolρtreated=6.02.80≈2.14\frac{\rho_{\text{control}}}{\rho_{\text{treated}}} = \frac{6.0}{2.80} \approx 2.14.

Loading workspace…