Resources

A renal epithelial cell operates an antiporter (exchanger) that couples the movement of Na+\text{Na}^+ down its electrochemical gradient to the extrusion of H+\text{H}^+ into the urine (1Naout++1Hin+⇌1Nain++1Hout+1\text{Na}^+_{\text{out}} + 1\text{H}^+_{\text{in}} \rightleftharpoons 1\text{Na}^+_{\text{in}} + 1\text{H}^+_{\text{out}}). A student evaluates whether the membrane potential ΔV=Vin−Vout=−60 mV\Delta V = V_{\text{in}} - V_{\text{out}} = -60\text{ mV} provides electrical driving force for this transport cycle. Given [Na+]out=140 mM[\text{Na}^+]_{\text{out}} = 140\text{ mM}, [Na+]in=14 mM[\text{Na}^+]_{\text{in}} = 14\text{ mM}, cytosolic pHin=7.20\text{pH}_{\text{in}} = 7.20, and luminal pHout=6.20\text{pH}_{\text{out}} = 6.20 at T=310 KT = 310\text{ K} (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), F=96485 C/molF = 96485\text{ C/mol}): (a) write the net electrochemical free energy equation ΔGnet\Delta G_{\text{net}} and explain why the membrane electrical term zFΔVz F \Delta V cancels out entirely to 0 kJ/mol0\text{ kJ/mol}, and (b) calculate the net chemical ΔGnet\Delta G_{\text{net}} (in kJ/mol\text{kJ/mol}) to confirm whether inward Na+\text{Na}^+ transport can spontaneously power H+\text{H}^+ extrusion under these conditions.

Answer and steps

Final answer

(a) The electrical term cancels to 0 kJ/mol0\text{ kJ/mol} because both Na+\text{Na}^+ and H+\text{H}^+ possess identical valence (z=+1z = +1) and move in opposite directions across the membrane (Δznet=zNa−zH=(+1)−(+1)=0\Delta z_{\text{net}} = z_{\text{Na}} - z_{\text{H}} = (+1) - (+1) = 0), making the exchange electroneutral; (b) ΔGnet=−0.003 kJ/mol\Delta G_{\text{net}} = -0.003\text{ kJ/mol} (or 0.00 kJ/mol0.00\text{ kJ/mol} to 3 sig figs; practically at thermodynamic equilibrium, as the 10-fold sodium gradient perfectly balances the 10-fold proton gradient: −5.93 kJ/mol+5.93 kJ/mol=0.00 kJ/mol-5.93\text{ kJ/mol} + 5.93\text{ kJ/mol} = 0.00\text{ kJ/mol}).

Steps

Part (a): Free Energy Equation and Electroneutrality

The total electrochemical free energy change (ΔG\Delta G) for moving an ion ii with valence zz across a membrane is the sum of its chemical (concentration) gradient and the electrical potential gradient:

ΔGi=RTln⁡([i]destination[i]source)+zFΔV\Delta G_i = RT \ln\left(\frac{[i]_{\text{destination}}}{[i]_{\text{source}}}\right) + z F \Delta V

For the 1NaX+out+1HX+in⇌1NaX+in+1HX+out1\ce{Na+}_{\text{out}} + 1\ce{H+}_{\text{in}} \rightleftharpoons 1\ce{Na+}_{\text{in}} + 1\ce{H+}_{\text{out}} exchanger:

  1. Inward movement of NaX+\ce{Na+} (from outside to inside): ΔGNaX+=RTln⁡([NaX+]in[NaX+]out)+zNaFΔV\Delta G_{\ce{Na+}} = RT \ln\left(\frac{[\ce{Na+}]_{\text{in}}}{[\ce{Na+}]_{\text{out}}}\right) + z_{\ce{Na}} F \Delta V
  2. Outward movement of HX+\ce{H+} (from inside to outside): ΔGHX+=RTln⁡([HX+]out[HX+]in)+zHF(Vout−Vin)=RTln⁡([HX+]out[HX+]in)−zHFΔV\Delta G_{\ce{H+}} = RT \ln\left(\frac{[\ce{H+}]_{\text{out}}}{[\ce{H+}]_{\text{in}}}\right) + z_{\ce{H}} F (V_{\text{out}} - V_{\text{in}}) = RT \ln\left(\frac{[\ce{H+}]_{\text{out}}}{[\ce{H+}]_{\text{in}}}\right) - z_{\ce{H}} F \Delta V

Summing both components gives the net free energy equation:

ΔGnet=RTln⁡([NaX+]in[HX+]out[NaX+]out[HX+]in)+(zNa−zH)FΔV\Delta G_{\text{net}} = RT \ln\left(\frac{[\ce{Na+}]_{\text{in}} [\ce{H+}]_{\text{out}}}{[\ce{Na+}]_{\text{out}} [\ce{H+}]_{\text{in}}}\right) + (z_{\ce{Na}} - z_{\ce{H}}) F \Delta V

Why the electrical term cancels: Both ions are monovalent cations (zNa=+1z_{\ce{Na}} = +1 and zH=+1z_{\ce{H}} = +1). Because one positive charge moves inward for every one positive charge moving outward, the net transferred charge per cycle is:

Δznet=zNa−zH=(+1)−(+1)=0\Delta z_{\text{net}} = z_{\ce{Na}} - z_{\ce{H}} = (+1) - (+1) = 0

Therefore, (zNa−zH)FΔV=(0)FΔV=0 kJ/mol(z_{\ce{Na}} - z_{\ce{H}}) F \Delta V = (0) F \Delta V = 0\text{ kJ/mol}. The exchanger is electroneutral, meaning the membrane potential ΔV\Delta V does not contribute any net driving force.


Part (b): Calculation of Net Chemical Free Energy (ΔGnet\Delta G_{\text{net}})

With the electrical component equal to zero, ΔGnet\Delta G_{\text{net}} depends solely on the chemical gradients:

ΔGnet=RTln⁡([NaX+]in[NaX+]out)+RTln⁡([HX+]out[HX+]in)\Delta G_{\text{net}} = RT \ln\left(\frac{[\ce{Na+}]_{\text{in}}}{[\ce{Na+}]_{\text{out}}}\right) + RT \ln\left(\frac{[\ce{H+}]_{\text{out}}}{[\ce{H+}]_{\text{in}}}\right)

  1. Calculate the sodium concentration ratio: [NaX+]in[NaX+]out=14 mM140 mM=0.10\frac{[\ce{Na+}]_{\text{in}}}{[\ce{Na+}]_{\text{out}}} = \frac{14\text{ mM}}{140\text{ mM}} = 0.10 ΔGNaX+=(8.314 J/(mol⋅K))(310 K)ln⁡(0.10)≈−5935 J/mol=−5.93 kJ/mol\Delta G_{\ce{Na+}} = (8.314\text{ J}/(\text{mol}\cdot\text{K}))(310\text{ K}) \ln(0.10) \approx -5935\text{ J/mol} = -5.93\text{ kJ/mol}
  2. Calculate the proton concentration ratio from pH\text{pH}: [HX+]in=10−pHin=10−7.20 M[\ce{H+}]_{\text{in}} = 10^{-\text{pH}_{\text{in}}} = 10^{-7.20}\text{ M} [HX+]out=10−pHout=10−6.20 M[\ce{H+}]_{\text{out}} = 10^{-\text{pH}_{\text{out}}} = 10^{-6.20}\text{ M} [HX+]out[HX+]in=10−6.2010−7.20=101.00=10\frac{[\ce{H+}]_{\text{out}}}{[\ce{H+}]_{\text{in}}} = \frac{10^{-6.20}}{10^{-7.20}} = 10^{1.00} = 10 ΔGHX+=(8.314 J/(mol⋅K))(310 K)ln⁡(10)≈+5935 J/mol=+5.93 kJ/mol\Delta G_{\ce{H+}} = (8.314\text{ J}/(\text{mol}\cdot\text{K}))(310\text{ K}) \ln(10) \approx +5935\text{ J/mol} = +5.93\text{ kJ/mol}
  3. Net free energy: ΔGnet=−5.93 kJ/mol+5.93 kJ/mol=0.00 kJ/mol\Delta G_{\text{net}} = -5.93\text{ kJ/mol} + 5.93\text{ kJ/mol} = 0.00\text{ kJ/mol}

Conclusion: Under these physiological conditions, ΔGnet≈0.00 kJ/mol\Delta G_{\text{net}} \approx 0.00\text{ kJ/mol} (specifically −0.003 kJ/mol-0.003\text{ kJ/mol} before rounding). The 1010-fold inward chemical gradient of NaX+\ce{Na+} exactly balances the 1010-fold outward gradient required to extrude HX+\ce{H+}. The transporter is at thermodynamic equilibrium, so there is no net driving force in either direction without an increase in the NaX+\ce{Na+} gradient or a decrease in extracellular proton concentration.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student sums the membrane electrical potential terms instead of accounting for the opposite directions of Na+ entry and H+ exit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔGelec=(+1)⋅F⋅ΔV+(+1)⋅F⋅ΔV=2⋅F⋅ΔV  ⟹  Both ions have charge +1, so the electrical terms add together to 2⋅F⋅ΔV and do not cancel to 0 kJ/mol.\Delta G_{\text{elec}} = (+1)\cdot F\cdot \Delta V + (+1)\cdot F\cdot \Delta V = 2\cdot F\cdot \Delta V \implies \text{Both ions have charge }+1\text{, so the electrical terms add together to }2\cdot F\cdot \Delta V\text{ and do not cancel to }0\text{ kJ/mol.}

    Correct

    ΔGelec=zNaFΔV+zHF(Vout−Vin)=(zNa−zH)FΔV=(1−1)FΔV=0 kJ/mol\Delta G_{\text{elec}} = z_{\text{Na}}F\Delta V + z_{\text{H}}F(V_{\text{out}} - V_{\text{in}}) = (z_{\text{Na}} - z_{\text{H}})F\Delta V = (1 - 1)F\Delta V = 0\text{ kJ/mol}

    Because Na+\text{Na}^+ moves inward (Vin−Vout=ΔVV_{\text{in}} - V_{\text{out}} = \Delta V) while H+\text{H}^+ moves outward (Vout−Vin=−ΔVV_{\text{out}} - V_{\text{in}} = -\Delta V), their electrical work terms have opposite signs and subtract rather than add.

  2. Step 2

    ΔGchem=R⋅T⋅ln⁡([Na+]in[Na+]out)+R⋅T⋅ln⁡([H+]out[H+]in)=8.314⋅310⋅ln⁡(0.10)+8.314⋅310⋅ln⁡(10)=−5.93 kJ/mol+5.93 kJ/mol=0 kJ/mol\Delta G_{\text{chem}} = R\cdot T\cdot \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) + R\cdot T\cdot \ln\left(\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}}\right) = 8.314\cdot 310\cdot \ln(0.10) + 8.314\cdot 310\cdot \ln(10) = -5.93\text{ kJ/mol} + 5.93\text{ kJ/mol} = 0\text{ kJ/mol}

  3. Step 3

    ΔGelec=2⋅96485⋅(−0.060)=−11.58 kJ/mol  ⟹  ΔGnet=0−11.58=−11.58 kJ/mol  ⟹  Because ΔGnet<0, inward Na+ transport spontaneously drives H+ extrusion.\Delta G_{\text{elec}} = 2\cdot 96485\cdot (-0.060) = -11.58\text{ kJ/mol} \implies \Delta G_{\text{net}} = 0 - 11.58 = -11.58\text{ kJ/mol} \implies \text{Because }\Delta G_{\text{net}} < 0\text{, inward }\text{Na}^+\text{ transport spontaneously drives }\text{H}^+\text{ extrusion.}

    Correct

    ΔGnet=ΔGchem+ΔGelec=0 kJ/mol+0 kJ/mol=0 kJ/mol\Delta G_{\text{net}} = \Delta G_{\text{chem}} + \Delta G_{\text{elec}} = 0\text{ kJ/mol} + 0\text{ kJ/mol} = 0\text{ kJ/mol} (system is at thermodynamic equilibrium; inward Na+\text{Na}^+ transport does not provide a net spontaneous driving force under these exact conditions).

    Your final calculation and conclusion carried over the non-zero electrical term from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the chemical potential equation for both ions moving across the membrane.

You accurately converted luminal and cytosolic pH\text{pH} values to relative [extH+][ ext{H}^+] concentrations.

You correctly calculated that the favorable 10-fold inward sodium gradient yields −5.93 kJ/mol-5.93\text{ kJ/mol}, exactly matching the +5.93 kJ/mol+5.93\text{ kJ/mol} needed to extrude protons against their 10-fold gradient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in transport vector potential

You treated both ions as moving in the same direction across the membrane potential rather than accounting for the antiport exchange vector.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the directional sign convention of electrical work in antiporters: moving a positive charge into the cell experiences ΔV=Vin−Vout\Delta V = V_{\text{in}} - V_{\text{out}}, whereas moving a positive charge out of the cell experiences −ΔV=Vout−Vin-\Delta V = V_{\text{out}} - V_{\text{in}}, making an exchange of equal valences electroneutral (znet=0z_{\text{net}} = 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the directional potential for each flux
  • For influx, electrical work is zF(Vin−Vout)=zFΔVz F (V_{\text{in}} - V_{\text{out}}) = z F \Delta V. For efflux, it is zF(Vout−Vin)=−zFΔVz F (V_{\text{out}} - V_{\text{in}}) = -z F \Delta V.

  • Always write the electrical work as zionFΔVsource→destinationz_{\text{ion}} F \Delta V_{\text{source} \to \text{destination}} with proper signs before combining terms.

Check Net Charge Translocation (Electroneutral vs. Rheogenic)
  • Calculate net charge moved inside per cycle: qnet=∑(ninzin)−∑(noutzout)q_{\text{net}} = \sum (n_{\text{in}} z_{\text{in}}) - \sum (n_{\text{out}} z_{\text{out}}).

  • If qnet=0q_{\text{net}} = 0, the transporter is electroneutral and ΔGelec=0\Delta G_{\text{elec}} = 0 regardless of the magnitude of ΔV\Delta V.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the net electrochemical energy for 1Naout++1Hin+⇌1Nain++1Hout+1\text{Na}^+_{\text{out}} + 1\text{H}^+_{\text{in}} \rightleftharpoons 1\text{Na}^+_{\text{in}} + 1\text{H}^+_{\text{out}}: ΔGnet=ΔGchem+(zNa−zH)FΔV\Delta G_{\text{net}} = \Delta G_{\text{chem}} + (z_{\text{Na}} - z_{\text{H}}) F \Delta V.

  2. Substitute ion valences: Δznet=(+1)−(+1)=0\Delta z_{\text{net}} = (+1) - (+1) = 0, yielding ΔGelec=(0)FΔV=0 kJ/mol\Delta G_{\text{elec}} = (0) F \Delta V = 0\text{ kJ/mol}.

  3. Combine with your correct chemical term: ΔGnet=0 kJ/mol+0 kJ/mol=0 kJ/mol\Delta G_{\text{net}} = 0\text{ kJ/mol} + 0\text{ kJ/mol} = 0\text{ kJ/mol}.

Final answer

(a) The electrical term cancels to 0 kJ/mol0\text{ kJ/mol} because both Na+\text{Na}^+ and H+\text{H}^+ have valence +1+1 and move in opposite directions, making the net translocated charge zero (electroneutral transport); (b) ΔGnet=0.00 kJ/mol\Delta G_{\text{net}} = 0.00\text{ kJ/mol} (specifically −0.003 kJ/mol-0.003\text{ kJ/mol} unrounded), meaning the system is at thermodynamic equilibrium and inward Na+\text{Na}^+ transport does not provide net driving force under these specific conditions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how symporters versus antiporters couple electrical potentials by determining the net translocated charge per cycle.

  • Practice identifying electroneutral versus electrogenic (rheogenic) secondary active transporters before writing out energy terms.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the proton ratio when calculating the free energy of moving H+ out of the cell, using [H+]_in / [H+]_out instead of [H+]_out / [H+]_in.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔGnet=R⋅T⋅ln⁡([Na+]in[Na+]out⋅[H+]out[H+]in)+znet⋅F⋅ΔV\Delta G_{\text{net}} = R \cdot T \cdot \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}} \cdot \frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}}\right) + z_{\text{net}} \cdot F \cdot \Delta V ⟹ Na+\text{Na}^+ enters the cell (+F⋅ΔV+F\cdot\Delta V) while H+\text{H}^+ leaves the cell (−F⋅ΔV-F\cdot\Delta V), so znet=+1−1=0z_{\text{net}} = +1 - 1 = 0 and the electrical term cancels out to 0 kJ/mol0\text{ kJ/mol}.

  2. Step 2

    [Na+]in[Na+]out=14140=0.10\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}} = \frac{14}{140} = 0.10

  3. Step 3

    [H+]in[H+]out=10−7.2010−6.20=0.10\frac{[\text{H}^+]_{\text{in}}}{[\text{H}^+]_{\text{out}}} = \frac{10^{-7.20}}{10^{-6.20}} = 0.10

    Correct

    [H+]out[H+]in=10−pHout10−pHin=10−6.2010−7.20=101.00=10\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}} = \frac{10^{-\text{pH}_{\text{out}}}}{10^{-\text{pH}_{\text{in}}}} = \frac{10^{-6.20}}{10^{-7.20}} = 10^{1.00} = 10

    You inverted the concentration ratio for the extruded proton. Because protons move outward from inside to outside, the destination over source ratio is [H+]out[H+]in\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}}, which equals 1010, not 0.100.10.

  4. Step 4

    ΔGnet=R⋅T⋅ln⁡(0.10⋅0.10)=8.314⋅310⋅ln⁡(0.01)⟹ΔGnet=2577.34⋅(−4.605) J/mol=−11.87 kJ/mol\Delta G_{\text{net}} = R \cdot T \cdot \ln(0.10 \cdot 0.10) = 8.314 \cdot 310 \cdot \ln(0.01) \Longrightarrow \Delta G_{\text{net}} = 2577.34 \cdot (-4.605)\text{ J/mol} = -11.87\text{ kJ/mol}

    Correct

    ΔGnet=RTln⁡(0.10⋅10)=RTln⁡(1.0)=0.00 kJ/mol\Delta G_{\text{net}} = RT \ln(0.10 \cdot 10) = RT \ln(1.0) = 0.00\text{ kJ/mol}

    This step correctly evaluated the algebraic expression using your inverted ratio, but the result is incorrect due to the propagated error from Step 3.

  5. Step 5

    Because ΔGnet\Delta G_{\text{net}} is negative, inward Na+\text{Na}^+ transport can spontaneously drive H+\text{H}^+ extrusion.

    Correct

    Because ΔGnet≈0.00 kJ/mol\Delta G_{\text{net}} \approx 0.00\text{ kJ/mol}, the transporter is at thermodynamic equilibrium; inward Na+\text{Na}^+ transport cannot provide net spontaneous driving force to extrude further H+\text{H}^+ under these conditions.

    Because your calculated ΔGnet\Delta G_{\text{net}} was artificially negative from the inverted ratio, your conclusion about transport spontaneity was incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You stated the correct net electrochemical potential equation combining chemical and electrical components.

You clearly reasoned that equal and opposite monovalent ion movements make the exchange electroneutral (znet=0z_{\text{net}} = 0).

You accurately converted pH values into hydronium ion concentrations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ion ratio for transported species

You wrote the algebraic term as [H+]out/[H+]in[\text{H}^+]_{\text{out}} / [\text{H}^+]_{\text{in}} in your formula, but accidentally evaluated [H+]in/[H+]out[\text{H}^+]_{\text{in}} / [\text{H}^+]_{\text{out}} on the next line.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of transport (source vs. destination) when setting up ion concentration gradients, leading to an inverted concentration ratio for species transported out of the cell.

REASONING PATH
Your ACEpath teacher’s suggested approach
Destination-over-Source Rule
  • For any passive or active movement of ion XX from compartment A to compartment B, the chemical driving force ratio inside the natural logarithm is always [X]destination[X]source=[X]B[X]A\frac{[X]_{\text{destination}}}{[X]_{\text{source}}} = \frac{[X]_{\text{B}}}{[X]_{\text{A}}}.

  • Always explicitly write labels with 'dest' and 'src' next to each ion before substituting numerical values.

Sign Sense Check for Uphill Transport
  • Transporting a substance against its chemical gradient from lower to higher concentration must yield a positive chemical ΔGchem>0\Delta G_{\text{chem}} > 0.

  • Check that extruding protons from pH 7.20\text{pH } 7.20 ([H+]=6.31×10−8 M[\text{H}^+] = 6.31 \times 10^{-8}\text{ M}) into a more acidic compartment at pH 6.20\text{pH } 6.20 ([H+]=6.31×10−7 M[\text{H}^+] = 6.31 \times 10^{-7}\text{ M}) costs energy (+5.93 kJ/mol+5.93\text{ kJ/mol}). Multiplying two values less than 11 indicated two downhill movements, which violates the antiporter's secondary active transport mechanism.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the correct proton ratio for outward transport: [H+]destination[H+]source=[H+]out[H+]in=10−6.2010−7.20=101.00=10\frac{[\text{H}^+]_{\text{destination}}}{[\text{H}^+]_{\text{source}}} = \frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}} = \frac{10^{-6.20}}{10^{-7.20}} = 10^{1.00} = 10.

  2. Multiply the coupled concentration ratios inside the logarithm: Q=([Na+]in[Na+]out)⋅([H+]out[H+]in)=0.10×10=1.00Q = \left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) \cdot \left(\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}}\right) = 0.10 \times 10 = 1.00.

  3. Calculate the net chemical free energy: ΔGnet=RTln⁡(1.00)=(8.314)(310)(0)=0.00 kJ/mol\Delta G_{\text{net}} = RT \ln(1.00) = (8.314)(310)(0) = 0.00\text{ kJ/mol}.

Final answer

ΔGnet=0.00 kJ/mol\Delta G_{\text{net}} = 0.00\text{ kJ/mol}; the system is at thermodynamic equilibrium, so inward Na+\text{Na}^+ movement does not spontaneously drive further outward H+\text{H}^+ extrusion under these exact conditions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your chemical activity ratio by verifying that the uphill component has a ratio greater than 1 ([H+]out/[H+]in=10[\text{H}^+]_{\text{out}}/[\text{H}^+]_{\text{in}} = 10).

  • Practice identifying electroneutral versus electrogenic transporters by computing net charge movement per cycle before substituting membrane potential.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts pH values directly as the proton concentration ratio instead of using 10^(-ΔpH).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔGnet=R⋅T⋅ln⁡([Na+]in[Na+]out)+R⋅T⋅ln⁡([H+]out[H+]in)+znet⋅F⋅ΔV\Delta G_{\text{net}} = R \cdot T \cdot \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) + R \cdot T \cdot \ln\left(\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}}\right) + z_{\text{net}} \cdot F \cdot \Delta V ⟹\Longrightarrow Moving one Na+\text{Na}^+ in adds +1⋅F⋅ΔV+1 \cdot F \cdot \Delta V and moving one H+\text{H}^+ out adds −1⋅F⋅ΔV-1 \cdot F \cdot \Delta V, so the electrical work sums to (+F⋅ΔV)−(F⋅ΔV)=0 kJ/mol(+F \cdot \Delta V) - (F \cdot \Delta V) = 0\text{ kJ/mol}.

  2. Step 2

    [Na+]in[Na+]out=14140=0.10\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}} = \frac{14}{140} = 0.10

  3. Step 3

    [H+]out[H+]in=7.20−6.20=1.0\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}} = 7.20 - 6.20 = 1.0

    Correct

    [H+]out[H+]in=10−pHout10−pHin=10pHin−pHout=107.20−6.20=101.00=10\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}} = \frac{10^{-\text{pH}_{\text{out}}}}{10^{-\text{pH}_{\text{in}}}} = 10^{\text{pH}_{\text{in}} - \text{pH}_{\text{out}}} = 10^{7.20 - 6.20} = 10^{1.00} = 10

    Because pH=−log⁡10[H+]\text{pH} = -\log_{10}[\text{H}^+], a difference in pH\text{pH} represents an exponential factor of 10. Subtracting the pH\text{pH} values directly gives ΔpH=1.0\Delta\text{pH} = 1.0, which means the concentration ratio is 10ΔpH=101=1010^{\Delta\text{pH}} = 10^1 = 10, not 1.01.0.

  4. Step 4

    ΔGnet=8.314⋅310⋅ln⁡(0.10⋅1.0)⟹ΔGnet=2577.34⋅(−2.303) J/mol=−5.94 kJ/mol\Delta G_{\text{net}} = 8.314 \cdot 310 \cdot \ln(0.10 \cdot 1.0) \Longrightarrow \Delta G_{\text{net}} = 2577.34 \cdot (-2.303)\text{ J/mol} = -5.94\text{ kJ/mol}

    Correct

    ΔGnet=(8.314)(310)ln⁡(0.10⋅10)=2577.34⋅ln⁡(1.0)=0.00 kJ/mol\Delta G_{\text{net}} = (8.314)(310)\ln(0.10 \cdot 10) = 2577.34 \cdot \ln(1.0) = 0.00\text{ kJ/mol}

    Your arithmetic was carried out accurately using your ratio of 1.01.0, but the numerical value was affected by the incorrect proton concentration ratio.

  5. Step 5

    Because ΔGnet\Delta G_{\text{net}} is −5.94 kJ/mol-5.94\text{ kJ/mol}, inward Na+\text{Na}^+ transport spontaneously drives H+\text{H}^+ extrusion.

    Correct

    Because ΔGnet=0.00 kJ/mol\Delta G_{\text{net}} = 0.00\text{ kJ/mol}, the transporter is at thermodynamic equilibrium and there is no net driving force under these conditions.

    Your conclusion was logical based on your calculated negative free energy, but with the correct ratio of 1010, the inward sodium gradient (−5.93 kJ/mol-5.93\text{ kJ/mol}) exactly balances the outward proton gradient (+5.93 kJ/mol+5.93\text{ kJ/mol}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the net electrochemical free energy equation by balancing the inward and outward chemical and electrical components.

You clearly justified the electroneutrality of the antiporter by showing that (+1)FΔV−(+1)FΔV=0 kJ/mol(+1)F\Delta V - (+1)F\Delta V = 0\text{ kJ/mol}.

You correctly computed the sodium concentration ratio as 0.100.10.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithmic to Linear Misconception in pH Ratio

You treated the arithmetic difference between two pH values as a direct concentration ratio rather than a power of 10.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing logarithmic scale differences with linear concentration ratios. Since pH=−log⁡10[H+]\text{pH} = -\log_{10}[\text{H}^+], the ratio of two proton concentrations is [H+]A[H+]B=10pHB−pHA\frac{[\text{H}^+]_A}{[\text{H}^+]_B} = 10^{\text{pH}_B - \text{pH}_A}, not pHB−pHA\text{pH}_B - \text{pH}_A.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting pH to Proton Ratio
  • [H+]1[H+]2=10pH2−pH1\frac{[\text{H}^+]_1}{[\text{H}^+]_2} = 10^{\text{pH}_2 - \text{pH}_1}

  • Always convert pH values back to molar concentrations using [H+]=10−pH[\text{H}^+] = 10^{-\text{pH}} before substituting them into a concentration ratio or free energy equation.

Thermodynamic Equilibrium in Exchangers
  • When [Na+]in[Na+]out⋅[H+]out[H+]in=1\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}} \cdot \frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}} = 1, ΔGchem=RTln⁡(1)=0 kJ/mol\Delta G_{\text{chem}} = RT\ln(1) = 0\text{ kJ/mol}.

  • Check whether equal fold-gradients in opposing directions cancel out completely to zero net free energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert each pH\text{pH} to [H+][\text{H}^+]: [H+]in=10−7.20 M[\text{H}^+]_{\text{in}} = 10^{-7.20}\text{ M} and [H+]out=10−6.20 M[\text{H}^+]_{\text{out}} = 10^{-6.20}\text{ M}.

  2. Calculate the outward proton ratio: [H+]out[H+]in=10−6.2010−7.20=107.20−6.20=101=10\frac{[\text{H}^+]_{\text{out}}}{[\text{H}^+]_{\text{in}}} = \frac{10^{-6.20}}{10^{-7.20}} = 10^{7.20 - 6.20} = 10^1 = 10.

  3. Substitute both chemical ratios into ΔGnet\Delta G_{\text{net}}: ΔGnet=RTln⁡(0.10⋅10)=RTln⁡(1.0)=0.00 kJ/mol\Delta G_{\text{net}} = RT \ln\left(0.10 \cdot 10\right) = RT \ln(1.0) = 0.00\text{ kJ/mol}.

Final answer

(a) The electrical term cancels because znet=zNa−zH=0z_{\text{net}} = z_{\text{Na}} - z_{\text{H}} = 0; (b) ΔGnet=0.00 kJ/mol\Delta G_{\text{net}} = 0.00\text{ kJ/mol} (the system is at thermodynamic equilibrium, so there is no net driving force).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the logarithmic definition of pH\text{pH} and practice rewriting ratios of concentrations using 10−pH10^{-\text{pH}}.

  • Practice identifying whether coupled ion antiporters are electroneutral (znet=0z_{\text{net}} = 0) or electrogenic (znet≠0z_{\text{net}} \neq 0).

  • Work through scenarios where one ion gradient is altered to see how the system shifts away from equilibrium.

Lock it in

Similar question

01

A renal bicarbonate cotransporter moves 1Na+1\text{Na}^+ and 2HCO3−2\text{HCO}_3^- in the same direction out of the cell into the interstitial space. Write the net electrical term (znetFΔV)(z_{\text{net}} F \Delta V) for this transport cycle where ΔV=Vin−Vout\Delta V = V_{\text{in}} - V_{\text{out}}.

Answer

Net charge moved inward is 1(+1)+2(−1)=−11(+1) + 2(-1) = -1 (or moving outward means net outward charge of −1-1, equivalent to net inward charge of +1+1). Across ΔV=Vin−Vout\Delta V = V_{\text{in}} - V_{\text{out}}, moving 1Nain+→Naout+1\text{Na}^+_{\text{in}} \to \text{Na}^+_{\text{out}} and 2HCO3,in−→2HCO3,out−2\text{HCO}_{3,\text{in}}^- \to 2\text{HCO}_{3,\text{out}}^- has electrical work ΔGelec=−1⋅zNaFΔV−2⋅zHCO3FΔV=−(+1)FΔV−2(−1)FΔV=+1⋅FΔV\Delta G_{\text{elec}} = -1 \cdot z_{\text{Na}} F \Delta V - 2 \cdot z_{\text{HCO}_3} F \Delta V = -(+1)F\Delta V - 2(-1)F\Delta V = +1 \cdot F \Delta V.

02

The cardiac Na+/Ca2+\text{Na}^+/\text{Ca}^{2+} exchanger (NCX) exchanges 3Naout++1Cain2+⇌3Nain++1Caout2+3\text{Na}^+_{\text{out}} + 1\text{Ca}^{2+}_{\text{in}} \rightleftharpoons 3\text{Na}^+_{\text{in}} + 1\text{Ca}^{2+}_{\text{out}}. At T=310 KT = 310\text{ K} and ΔV=−70 mV\Delta V = -70\text{ mV}, calculate the electrical free energy component ΔGelec\Delta G_{\text{elec}} for one forward cycle in kJ/mol\text{kJ/mol}.

Answer

Net charge entering the cell is Δznet=3(+1)−1(+2)=+1\Delta z_{\text{net}} = 3(+1) - 1(+2) = +1. Therefore, ΔGelec=(+1)FΔV=1×(96485 C/mol)×(−0.070 V)=−6754 J/mol≈−6.75 kJ/mol\Delta G_{\text{elec}} = (+1) F \Delta V = 1 \times (96485\text{ C/mol}) \times (-0.070\text{ V}) = -6754\text{ J/mol} \approx -6.75\text{ kJ/mol}. (The negative membrane potential favors inward forward transport).

03

An intestinal cell absorbs glucose via the SGLT1 symporter (2Naout++1glucoseout⇌2Nain++1glucosein2\text{Na}^+_{\text{out}} + 1\text{glucose}_{\text{out}} \rightleftharpoons 2\text{Na}^+_{\text{in}} + 1\text{glucose}_{\text{in}}) at T=310 KT = 310\text{ K} with ΔV=−60 mV\Delta V = -60\text{ mV}. If [Na+]out=140 mM[\text{Na}^+]_{\text{out}} = 140\text{ mM} and [Na+]in=14 mM[\text{Na}^+]_{\text{in}} = 14\text{ mM}, calculate the maximum theoretical concentration ratio [glucose]in/[glucose]out[\text{glucose}]_{\text{in}}/[\text{glucose}]_{\text{out}} that this sodium gradient can sustain at thermodynamic equilibrium.

Answer

For 2Na+2\text{Na}^+ entry: ΔGNa=2[RTln⁡(0.10)+(+1)FΔV]=2[−5.93 kJ/mol+(96.485×−0.060) kJ/mol]=2[−5.93−5.79]=2(−11.72)=−23.44 kJ/mol\Delta G_{\text{Na}} = 2 [RT \ln(0.10) + (+1)F\Delta V] = 2[-5.93\text{ kJ/mol} + (96.485 \times -0.060)\text{ kJ/mol}] = 2[-5.93 - 5.79] = 2(-11.72) = -23.44\text{ kJ/mol}. At equilibrium, ΔGglucose=−ΔGNa=+23.44 kJ/mol\Delta G_{\text{glucose}} = -\Delta G_{\text{Na}} = +23.44\text{ kJ/mol}. Since ΔGglucose=RTln⁡([glucose]in/[glucose]out)\Delta G_{\text{glucose}} = RT \ln([\text{glucose}]_{\text{in}}/[\text{glucose}]_{\text{out}}), ln⁡(ratio)=23440/(8.314×310)≈9.10\ln(\text{ratio}) = 23440 / (8.314 \times 310) \approx 9.10, giving [glucose]in/[glucose]out=e9.10≈8.9×103[\text{glucose}]_{\text{in}}/[\text{glucose}]_{\text{out}} = e^{9.10} \approx 8.9 \times 10^3 (an accumulation ratio of ~9000-fold).

Loading workspace…