Resources

In a molecular biology laboratory, researchers investigate the mechanism of transcriptional regulation and translation using an in vitro lacZ reporter gene assay. The transcription reaction is initiated with 1.50 nM1.50\text{ nM} of linearized plasmid template containing the lacZ promoter and coding sequence (3,072 bp3{,}072\text{ bp}). To verify transcriptional fidelity, the reaction is stopped at t=120 st = 120\text{ s}, and the synthesized 3,072-nt3{,}072\text{-nt} mRNA transcript is quantified using fluorometric capillary electrophoresis, yielding 180 ng180\text{ ng} of full-length mRNA in a 50.0 μL50.0\,\mu\text{L} aliquot. Given the average molecular weight of a ribonucleotide monophosphate in the transcript is 330 g/mol330\text{ g/mol}: (a) calculate the molar concentration of the full-length mRNA in nanomolar (nM\text{nM}) in the reaction vessel at t=120 st = 120\text{ s}, and (b) if this entire 50.0 μL50.0\,\mu\text{L} transcript pool is transferred to a cell-free translation system where each mRNA molecule is translated concurrently by a polysome averaging 55 ribosomes, each completing synthesis of one β\beta-galactosidase monomer (1,024 amino acids1{,}024\text{ amino acids}) every 180 s180\text{ s}, calculate the initial rate of polypeptide chain production in pmol/(L⋅s)\text{pmol}/(\text{L} \cdot \text{s}).

Answer and steps

Final answer

(a) [mRNA]=3.55 nM[\text{mRNA}] = 3.55\text{ nM}. (b) Initial rate of polypeptide production =98.6 pmol/(L⋅s)= 98.6\text{ pmol}/(\text{L} \cdot \text{s}).

Steps

Part (a): Determining the Molar Concentration of mRNA

  1. Calculate the molecular weight of the full-length mRNA: The full-length transcript is 3,072 nucleotides3{,}072\text{ nucleotides} long, with an average ribonucleotide monophosphate molecular weight of 330 g/mol330\text{ g/mol}: MWmRNA=3,072 nt×330 g/(mol⋅nt)=1,013,760 g/mol\text{MW}_{\text{mRNA}} = 3{,}072\text{ nt} \times 330\text{ g}/(\text{mol} \cdot \text{nt}) = 1{,}013{,}760\text{ g/mol}
  2. Calculate the mass concentration of mRNA: The aliquot contains 180 ng180\text{ ng} (180×10−9 g180 \times 10^{-9}\text{ g}) of mRNA in a volume of 50.0 μL50.0\,\mu\text{L} (50.0×10−6 L50.0 \times 10^{-6}\text{ L}): ρmRNA=180×10−9 g50.0×10−6 L=3.60×10−3 g/L\rho_{\text{mRNA}} = \frac{180 \times 10^{-9}\text{ g}}{50.0 \times 10^{-6}\text{ L}} = 3.60 \times 10^{-3}\text{ g/L}
  3. Calculate the molar concentration: Divide the mass concentration by the molecular weight: [mRNA]=ρmRNAMWmRNA=3.60×10−3 g/L1,013,760 g/mol≈3.551×10−9 mol/L=3.55 nM[\text{mRNA}] = \frac{\rho_{\text{mRNA}}}{\text{MW}_{\text{mRNA}}} = \frac{3.60 \times 10^{-3}\text{ g/L}}{1{,}013{,}760\text{ g/mol}} \approx 3.551 \times 10^{-9}\text{ mol/L} = 3.55\text{ nM}

Part (b): Determining the Initial Rate of Polypeptide Synthesis

  1. Determine the synthesis rate per mRNA molecule: Each mRNA transcript is actively translated by an average of 55 ribosomes simultaneously (a polysome). Since each ribosome synthesizes one complete polypeptide every 180 s180\text{ s}, the number of polypeptide chains produced per mRNA molecule per second is: keff=5 chains180 s=136 s−1≈0.02778 s−1k_{\text{eff}} = \frac{5\text{ chains}}{180\text{ s}} = \frac{1}{36}\text{ s}^{-1} \approx 0.02778\text{ s}^{-1}
  2. Calculate the volumetric rate of polypeptide production: Multiplying the single-transcript synthesis frequency by the concentration of mRNA transcripts in the reaction mixture ([mRNA]=3.551×10−9 mol/L[\text{mRNA}] = 3.551 \times 10^{-9}\text{ mol/L}) yields the production rate: Rate=[mRNA]×keff=3.551×10−9 mol/(L⋅s)×5180\text{Rate} = [\text{mRNA}] \times k_{\text{eff}} = 3.551 \times 10^{-9}\text{ mol}/(\text{L} \cdot \text{s}) \times \frac{5}{180} Rate≈9.864×10−11 mol/(L⋅s)=98.6 pmol/(L⋅s)\text{Rate} \approx 9.864 \times 10^{-11}\text{ mol}/(\text{L} \cdot \text{s}) = 98.6\text{ pmol}/(\text{L} \cdot \text{s})

(Pitfall: Ensure that the polysome count is multiplied rather than divided; multiple ribosomes work in parallel on the same mRNA strand, increasing the overall rate of product release proportionally.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the single-stranded mRNA as double-stranded and doubles the nucleotide count or average molecular weight when calculating transcript molar mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    MW=2×3,072×330 g/mol=2,027,520 g/mol\text{MW} = 2 \times 3{,}072 \times 330\text{ g/mol} = 2{,}027{,}520\text{ g/mol}

    Correct

    MWmRNA=3,072 nt×330 g/(mol⋅nt)=1,013,760 g/mol\text{MW}_{\text{mRNA}} = 3{,}072\text{ nt} \times 330\text{ g/(mol}\cdot\text{nt)} = 1{,}013{,}760\text{ g/mol}

    You included an extra factor of 22 as if the mRNA were double-stranded. Because mRNA transcripts are single-stranded nucleic acids, the molecular weight is simply the total nucleotide count multiplied by the average ribonucleotide mass.

  2. Step 2

    Mass conc=180 ng/50 μL=3.60 mg/L  ⟹  mRNA conc=(3.60×10−3 g/L)/(2,027,520 g/mol)=1.78 nM\text{Mass conc} = 180\text{ ng} / 50\,\mu\text{L} = 3.60\text{ mg/L} \implies \text{mRNA conc} = (3.60 \times 10^{-3}\text{ g/L}) / (2{,}027{,}520\text{ g/mol}) = 1.78\text{ nM}

    Correct

    ρmRNA=180×10−9 g50.0×10−6 L=3.60×10−3 g/L  ⟹  [mRNA]=3.60×10−3 g/L1,013,760 g/mol≈3.55 nM\rho_{\text{mRNA}} = \frac{180 \times 10^{-9}\text{ g}}{50.0 \times 10^{-6}\text{ L}} = 3.60 \times 10^{-3}\text{ g/L} \implies [\text{mRNA}] = \frac{3.60 \times 10^{-3}\text{ g/L}}{1{,}013{,}760\text{ g/mol}} \approx 3.55\text{ nM}

    You determined the mass concentration correctly, but dividing by the doubled molecular weight halved your resulting molar concentration from 3.55 nM3.55\text{ nM} to 1.78 nM1.78\text{ nM}.

  3. Step 3

    mRNA conc=1.78 nM=1,780 pmol/L  ⟹  Active ribosome conc=5×1,780 pmol/L=8,900 pmol/L  ⟹  Polypeptide rate=8,900 pmol/L/180 s=49.4 pmol/(L⋅s)\text{mRNA conc} = 1.78\text{ nM} = 1{,}780\text{ pmol/L} \implies \text{Active ribosome conc} = 5 \times 1{,}780\text{ pmol/L} = 8{,}900\text{ pmol/L} \implies \text{Polypeptide rate} = 8{,}900\text{ pmol/L} / 180\text{ s} = 49.4\text{ pmol}/(\text{L} \cdot \text{s})

    Correct

    [Ribosomes]=5×3.551 nM=17.76 nM  ⟹  Rate=17,755 pmol/L180 s≈98.6 pmol/(L⋅s)[\text{Ribosomes}] = 5 \times 3.551\text{ nM} = 17.76\text{ nM} \implies \text{Rate} = \frac{17{,}755\text{ pmol/L}}{180\text{ s}} \approx 98.6\text{ pmol}/(\text{L} \cdot \text{s})

    Your kinetic translation logic is completely sound, but propagating the halved mRNA concentration led to a final rate that is exactly half of the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the mass concentration of mRNA accurately as 3.60 mg/L3.60\text{ mg/L}.

You correctly recognized that polysomes translate in parallel, multiplying the transcript concentration by 55 to find the active translating ribosome concentration.

You properly converted units and divided by the transit time of 180 s180\text{ s} to compute the final rate in pmol/(L⋅s)\text{pmol}/(\text{L} \cdot \text{s}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double-strand assumption on single-stranded RNA

You accidentally added a factor of 22 when calculating the molecular weight of the single-stranded mRNA transcript.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated double-stranded DNA template conventions (base pairs) with single-stranded mRNA transcripts (single nucleotides), incorrectly doubling the molar mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Strandedness of Nucleic Acids
  • Double-stranded DNA consists of base pairs (2 nucleotides per bp2\text{ nucleotides per bp}), whereas primary mRNA transcripts are single-stranded (1 nucleotide per position1\text{ nucleotide per position}).

  • Always multiply the sequence length in nucleotides directly by the monomer nucleotide molecular weight without introducing a factor of 22.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate transcript molar mass: MWmRNA=3,072 nt×330 g/(mol⋅nt)=1,013,760 g/mol\text{MW}_{\text{mRNA}} = 3{,}072\text{ nt} \times 330\text{ g/(mol}\cdot\text{nt)} = 1{,}013{,}760\text{ g/mol}.

  2. Find mRNA molar concentration: [mRNA]=3.60×10−3 g/L1,013,760 g/mol≈3.551×10−9 mol/L=3.55 nM[\text{mRNA}] = \frac{3.60 \times 10^{-3}\text{ g/L}}{1{,}013{,}760\text{ g/mol}} \approx 3.551 \times 10^{-9}\text{ mol/L} = 3.55\text{ nM}.

  3. Calculate active translating ribosome concentration: [Ribosomes]=5×3.551 nM=17.755 nM=17,755 pmol/L[\text{Ribosomes}] = 5 \times 3.551\text{ nM} = 17.755\text{ nM} = 17{,}755\text{ pmol/L}.

  4. Determine the rate of polypeptide synthesis: Rate=17,755 pmol/L180 s≈98.6 pmol/(L⋅s)\text{Rate} = \frac{17{,}755\text{ pmol/L}}{180\text{ s}} \approx 98.6\text{ pmol}/(\text{L} \cdot \text{s}).

Final answer

(a) [mRNA]=3.55 nM[\text{mRNA}] = 3.55\text{ nM}; (b) Rate=98.6 pmol/(L⋅s)\text{Rate} = 98.6\text{ pmol}/(\text{L} \cdot \text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the structural differences between dsDNA and ssRNA when setting up molecular mass formulas.

  • Practice identifying whether a molecular biology quantification is reported in base pairs (bp) or single nucleotides (nt).

OverviewACEpath Teacher's Diagnosis

02 The student forgets to account for the polysome density of 5 ribosomes per mRNA and calculates the polypeptide synthesis rate based on only one ribosome per transcript.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    MW=3,072×330 g/mol=1,013,760 g/mol\text{MW} = 3{,}072 \times 330\text{ g/mol} = 1{,}013{,}760\text{ g/mol}

  2. Step 2

    Mass conc=180 ng/50 μL=3.60 mg/L  ⟹  mRNA conc=3.60×10−3 g/L1,013,760 g/mol=3.55 nM\text{Mass conc} = 180\text{ ng} / 50\,\mu\text{L} = 3.60\text{ mg/L} \implies \text{mRNA conc} = \frac{3.60 \times 10^{-3}\text{ g/L}}{1{,}013{,}760\text{ g/mol}} = 3.55\text{ nM}

  3. Step 3

    mRNA conc=3.55 nM=3,550 pmol/L\text{mRNA conc} = 3.55\text{ nM} = 3{,}550\text{ pmol/L}

  4. Step 4

    Rate=3,550 pmol/L/180 s=19.7 pmol/(L⋅s)\text{Rate} = 3{,}550\text{ pmol/L} / 180\text{ s} = 19.7\text{ pmol}/(\text{L} \cdot \text{s})

    Correct

    Rate=[mRNA]×Nribosomest=3,551 pmol/L×5180 s≈98.6 pmol/(L⋅s)\text{Rate} = [\text{mRNA}] \times \frac{N_{\text{ribosomes}}}{t} = 3{,}551\text{ pmol/L} \times \frac{5}{180\text{ s}} \approx 98.6\text{ pmol}/(\text{L} \cdot \text{s})

    You calculated the polypeptide production rate assuming only a single ribosome translates each transcript. Because each mRNA is loaded with an average polysome of 5 ribosomes operating in parallel, the total production rate must be multiplied by 5.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the total molecular weight of the mRNA using the nucleotide count and average monomer mass.

You determined the mass concentration and converted it into the correct molar concentration of 3.55 nM3.55\text{ nM}.

You converted concentrations into compatible units (pmol/L\text{pmol/L}) before computing the rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted polysome ribosome multiplier in translation rate

You divided the mRNA concentration by the 180 s180\text{ s} elongation duration per ribosome, but forgot to multiply by the 55 ribosomes translating simultaneously on each transcript.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating translation rate as 1 polypeptide per transcript per cycle rather than recognizing that a polysome acts as a parallel catalytic assembly where each bound ribosome independently completes and releases a nascent chain.

REASONING PATH
Your ACEpath teacher’s suggested approach
Polysome Architecture
  • Multiple ribosomes bind to a single mRNA strand concurrently, each synthesizing its own polypeptide chain.

  • Multiply the single-ribosome completion frequency (1/t1/t) by the average number of ribosomes per polysome (nn) to find the total synthesis frequency per transcript (n/tn/t).

Volumetric Production Rate
  • Rate of product release=[mRNA template]×(ribosomestranscript)×(1τsynthesis)\text{Rate of product release} = [\text{mRNA template}] \times \left(\frac{\text{ribosomes}}{\text{transcript}}\right) \times \left(\frac{1}{\tau_{\text{synthesis}}}\right).

  • Verify that all parallel catalytic units per molecule of template are factored into the turnover rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Each mRNA molecule is bound by an average of 55 ribosomes, with each ribosome releasing a complete polypeptide every 180 s180\text{ s}.

  2. Compute the effective rate constant per transcript: keff=5180 s=136 s−1≈0.02778 s−1k_{\text{eff}} = \frac{5}{180\text{ s}} = \frac{1}{36}\text{ s}^{-1} \approx 0.02778\text{ s}^{-1}.

  3. Multiply by the mRNA concentration: Rate=3,551 pmol/L×0.02778 s−1≈98.6 pmol/(L⋅s)\text{Rate} = 3{,}551\text{ pmol/L} \times 0.02778\text{ s}^{-1} \approx 98.6\text{ pmol}/(\text{L} \cdot \text{s}).

Final answer

(a) [mRNA]=3.55 nM[\text{mRNA}] = 3.55\text{ nM}; (b) Initial rate =98.6 pmol/(L⋅s)= 98.6\text{ pmol}/(\text{L} \cdot \text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how polysome formation affects the stoichiometry of protein synthesis per unit of mRNA.

  • Double-check rate equations to verify whether enzymes or ribosomes operate in series or in parallel on a given substrate.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the transcription duration of 120 seconds with the translation completion time of 180 seconds when determining the translation rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    MW=3,072×330 g/mol=1,013,760 g/mol  ⟹  Mass conc=180 ng50 μL=3.60 mg/L  ⟹  mRNA conc=3.60×10−3 g/L1,013,760 g/mol=3.55 nM\text{MW} = 3{,}072 \times 330\text{ g/mol} = 1{,}013{,}760\text{ g/mol} \implies \text{Mass conc} = \frac{180\text{ ng}}{50\,\mu\text{L}} = 3.60\text{ mg/L} \implies \text{mRNA conc} = \frac{3.60 \times 10^{-3}\text{ g/L}}{1{,}013{,}760\text{ g/mol}} = 3.55\text{ nM}

  2. Step 2

    mRNA conc=3.55 nM=3,550 pmol/L  ⟹  Ribosome conc=5×3,550 pmol/L=17,750 pmol/L\text{mRNA conc} = 3.55\text{ nM} = 3{,}550\text{ pmol/L} \implies \text{Ribosome conc} = 5 \times 3{,}550\text{ pmol/L} = 17{,}750\text{ pmol/L}

  3. Step 3

    Rate=17,750 pmol/L120 s=147.9 pmol/(L⋅s)\text{Rate} = \frac{17{,}750\text{ pmol/L}}{120\text{ s}} = 147.9\text{ pmol}/(\text{L} \cdot \text{s})

    Correct

    Rate=17,755 pmol/L180 s≈98.6 pmol/(L⋅s)\text{Rate} = \frac{17{,}755\text{ pmol/L}}{180\text{ s}} \approx 98.6\text{ pmol}/(\text{L} \cdot \text{s})

    You divided by 120 s120\text{ s}, which was the duration of the transcription assay in part (a), instead of 180 s180\text{ s}, the time required for a ribosome to synthesize one complete polypeptide chain.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately computed the transcript molecular weight and molar concentration in part (a).

You correctly converted units between nanomolar and picomolar.

You recognized that multiple ribosomes in a polysome act concurrently as independent synthesis centers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parameter Confusion between Coupled Processes

You substituted the transcription stopping time (120 s120\text{ s}) into the translation velocity equation instead of the translation transit time (180 s180\text{ s}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When multi-step biochemical assays report durations for separate experimental stages (transcription synthesis versus translation turnover), it is easy to grab an earlier time parameter from the problem statement rather than matching the specific kinetic constant of the active process.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match time parameters to their specific biological process
  • In multi-stage assay problems, transcription elapsed time (ttxt_{\text{tx}}) determines accumulated yield, while ribosome transit time (τtl\tau_{\text{tl}}) governs the turnover rate per translating ribosome.

  • Circle each time parameter given in the prompt and label its exact stage (e.g., t=120 st = 120\text{ s} for transcription assay stopping time; τ=180 s\tau = 180\text{ s} for ribosome polypeptide elongation period).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the translation completion time τ=180 s\tau = 180\text{ s} for each ribosome to find the turnover frequency: k=1180 sk = \frac{1}{180\text{ s}}.

  2. Multiply the active ribosome concentration by the turnover frequency: Rate=17,755 pmol/L180 s≈98.6 pmol/(L⋅s)\text{Rate} = \frac{17{,}755\text{ pmol/L}}{180\text{ s}} \approx 98.6\text{ pmol}/(\text{L} \cdot \text{s}).

Final answer

(a) [mRNA]=3.55 nM[\text{mRNA}] = 3.55\text{ nM}. (b) Initial rate of polypeptide production =98.6 pmol/(L⋅s)= 98.6\text{ pmol}/(\text{L} \cdot \text{s}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review your kinetic parameters before dividing: verify that the denominator is the turnover or transit time of the relevant enzyme or ribosome.

  • Practice coupled transcription-translation word problems to build confidence in tracking variables across distinct reaction stages.

Lock it in

Similar question

01

A cell-free transcription system produces 660 ng660\text{ ng} of an 800-nt800\text{-nt} mRNA transcript in a 20.0 μL20.0\,\mu\text{L} reaction. Assuming an average nucleotide monophosphate mass of 330 g/mol330\text{ g/mol}, what is the molar concentration of the mRNA in nM\text{nM}?

Answer

125 nM125\text{ nM}. First calculate MW=800 nt×330 g/mol=264,000 g/mol\text{MW} = 800\text{ nt} \times 330\text{ g/mol} = 264{,}000\text{ g/mol}. Mass concentration is 660×10−9 g20.0×10−6 L=0.033 g/L\frac{660 \times 10^{-9}\text{ g}}{20.0 \times 10^{-6}\text{ L}} = 0.033\text{ g/L}. Then [mRNA]=0.033 g/L264,000 g/mol=1.25×10−7 M=125 nM[\text{mRNA}] = \frac{0.033\text{ g/L}}{264{,}000\text{ g/mol}} = 1.25 \times 10^{-7}\text{ M} = 125\text{ nM}.

02

A 2.0 nM2.0\text{ nM} solution of a 1,500-nt1{,}500\text{-nt} mRNA is translated in vitro. Each transcript is loaded with an average polysome of 44 ribosomes, each taking 120 s120\text{ s} to synthesize a complete protein. Calculate the polypeptide production rate in pmol/(L⋅s)\text{pmol}/(\text{L} \cdot \text{s}).

Answer

66.7 pmol/(L⋅s)66.7\text{ pmol}/(\text{L} \cdot \text{s}). Effective rate per transcript is 4120 s=130 s−1\frac{4}{120\text{ s}} = \frac{1}{30}\text{ s}^{-1}. Total rate =2,000 pmol/L×130 s−1≈66.7 pmol/(L⋅s)= 2{,}000\text{ pmol/L} \times \frac{1}{30}\text{ s}^{-1} \approx 66.7\text{ pmol}/(\text{L} \cdot \text{s}).

03

A 2,000-bp2{,}000\text{-bp} linearized DNA plasmid (660 g/mol660\text{ g/mol} per base pair) at 5.0 nM5.0\text{ nM} serves as template for transcription yielding 1,200-nt1{,}200\text{-nt} mRNA transcripts (330 g/mol330\text{ g/mol} per ribonucleotide). After 10 minutes10\text{ minutes}, the reaction yields 396 ng396\text{ ng} of mRNA in 100 μL100\,\mu\text{L}. If the resulting mRNA pool is translated with an average polysome size of 66 ribosomes completing a chain every 90 s90\text{ s}, calculate: (1) the mRNA molar concentration, and (2) the protein synthesis rate in pmol/(L⋅s)\text{pmol}/(\text{L} \cdot \text{s}).

Answer

(1) [mRNA]=10.0 nM[\text{mRNA}] = 10.0\text{ nM}; (2) Rate=667 pmol/(L⋅s)\text{Rate} = 667\text{ pmol}/(\text{L} \cdot \text{s}). Transcript MW=1,200×330=396,000 g/mol\text{MW} = 1{,}200 \times 330 = 396{,}000\text{ g/mol}. Mass concentration =396×10−9 g100×10−6 L=3.96×10−3 g/L= \frac{396 \times 10^{-9}\text{ g}}{100 \times 10^{-6}\text{ L}} = 3.96 \times 10^{-3}\text{ g/L}. Thus [mRNA]=3.96×10−3396,000=1.00×10−8 M=10.0 nM[\text{mRNA}] = \frac{3.96 \times 10^{-3}}{396{,}000} = 1.00 \times 10^{-8}\text{ M} = 10.0\text{ nM}. Translation rate =10,000 pmol/L×690 s=666.7 pmol/(L⋅s)≈667 pmol/(L⋅s)= 10{,}000\text{ pmol/L} \times \frac{6}{90\text{ s}} = 666.7\text{ pmol}/(\text{L} \cdot \text{s}) \approx 667\text{ pmol}/(\text{L} \cdot \text{s}).

Loading workspace…