Resources

A cytologist performs karyotyping and quantitative DNA fluorescence on individual dividing cells from an animal with a diploid genome (2n=162n = 16, with an unreplicated G1G_1 nuclear DNA content of 2C=4.0 pg2C = 4.0\text{ pg}). An isolated meiotic cell is found to contain 88 distinct, physically separated chromosomes clustered at each of two opposite spindle poles, where each chromosome still consists of two distinct chromatids connected at a centromere, and the total cellular DNA content is measured to be 4.0 pg4.0\text{ pg}. Reverse-engineer this cellular state to determine: (a) the exact stage of meiosis that immediately preceded this observed configuration, and (b) the total number of chromatids and DNA mass in pg present during that preceding stage.

Answer and steps

Final answer

(a) Anaphase I; (b) 1616 chromatids and 8.0 pg8.0\text{ pg} of DNA (representing the 4C4C level before reductional division).

Steps

01

Identify the Observed Meiotic Stage

  • Spindle Pole Clustering and Chromosome Structure: The cell exhibits 88 distinct chromosomes gathered at each of the two opposite spindle poles, where each chromosome still consists of two sister chromatids joined at a centromere.
  • Reduction of Chromosome Number: The organism has a diploid number of 2n=162n = 16. Having 88 double-chromatid chromosomes (n=8n = 8) at each pole indicates that homologous chromosome pairs have separated and reached the poles without sister chromatid separation.
  • Deducing the Current Stage: The accumulation of separated sets of dyads at the poles marks Telophase I (or the telophase I / cytokinesis transition).
  • Determining the Immediately Preceding Stage (Part a): The stage directly preceding Telophase I during which these homologous chromosomes traveled along the meiotic spindle toward opposite poles is Anaphase I.

02

Determine DNA Mass and Chromatid Configuration in the Preceding Stage (Part b)

  • DNA Mass Calculation:

    • In the unreplicated G1G_1 diploid phase, the cell contains a 2C2C DNA content of 4.0 pg4.0\text{ pg}.
    • Prior to meiosis, the cell undergoes DNA replication during meiotic S-phase, doubling the DNA mass from 2C2C to 4C4C: DNA mass in Meiosis I=2×4.0 pg=8.0 pg\text{DNA mass in Meiosis I} = 2 \times 4.0\text{ pg} = 8.0\text{ pg}
    • Throughout Prophase I, Metaphase I, and Anaphase I, this total DNA mass of 8.0 pg8.0\text{ pg} remains within the single parent cell prior to the physical separation of the cytoplasm during cytokinesis I.
  • Chromatid and Chromosome Assessment:

    • Before the reductional division completes, the total meiotic complement corresponding to the 4C4C genetic level represents 1616 duplicated chromatid structures (dyad units) across the dividing complement, yielding 8.0 pg8.0\text{ pg} of total cellular DNA.
    • Therefore, during Anaphase I, the meiotic cell contains 1616 chromatids and 8.0 pg8.0\text{ pg} of DNA.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the observed stage as Anaphase II because there are 8 chromosomes at each pole, leading them to deduce Metaphase II with half the correct chromatid count and DNA mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    8 chromosomes at each pole   ⟹  \implies Sister chromatids are separating to poles in meiosis II   ⟹  \implies Preceding stage is Metaphase II

    Correct

    Each pole receives 88 double-chromatid chromosomes (n=8n = 8), meaning homologous chromosomes separated during Anaphase I. The observed stage is Telophase I, so the immediately preceding stage is Anaphase I.

    You overlooked the detail that each chromosome at the poles still has two distinct chromatids attached at a centromere. Sister chromatids do not separate until Anaphase II. When double-chromatid chromosomes move to opposite poles, the cell is completing Meiosis I (Telophase I), so the preceding stage was Anaphase I.

  2. Step 2

    In Metaphase II there are 8 replicated chromosomes   ⟹  \implies 8×2=16 chromatids8 \times 2 = 16\text{ chromatids}   ⟹  \implies DNA content=4.0 pg\text{DNA content} = 4.0\text{ pg}

    Correct

    During Anaphase I, the cell maintains its replicated 4C4C DNA complement of 8.0 pg8.0\text{ pg} (with 1616 duplicated chromosome units / chromatid structures).

    Your values were derived from your assumption of Metaphase II. Because the preceding stage was actually Anaphase I (prior to cytokinesis I), the cell still holds the full post-replication 4C4C DNA complement of 2×4.0 pg=8.0 pg2 \times 4.0\text{ pg} = 8.0\text{ pg}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that n=8n = 8 represents the haploid chromosome number for this organism.

You correctly related chromatid counts to replicated chromosomes by multiplying by 22.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Meiotic stage misidentification (Meiosis I vs Meiosis II)

You assumed sister chromatids were separating because each pole had 88 chromosomes, overlooking that each chromosome was still composed of two sister chromatids.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating homologous chromosome disjunction (Meiosis I) with sister chromatid disjunction (Meiosis II). In Meiosis I, dyads (two-chromatid chromosomes) segregate, leaving each pole with nn replicated chromosomes; individual single-chromatid chromosomes do not move to opposite poles until Anaphase II.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect Chromatid Structure at the Poles
  • If chromosomes arriving at the spindle poles consist of two sister chromatids joined at a centromere, reductional division (Meiosis I) has just occurred.

  • Check whether the migrating units are dyads (two chromatids per centromere →\rightarrow Anaphase I / Telophase I) or monads (single chromatids →\rightarrow Anaphase II / Telophase II).

Track $C$-value Across Meiotic Stages
  • A diploid cell enters Meiosis I at 4C4C after S-phase replication and remains 4C4C until cytokinesis I divides it into two 2C2C cells.

  • Multiply the G1G_1 baseline (2C2C) by 22 to find the total cellular DNA mass for any stage from Prophase I through late Anaphase I.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the physical structure of chromosomes at each pole: 88 chromosomes, each with 22 chromatids attached at a centromere (n=8n = 8 dyads).

  2. Because dyads are segregated, homologous chromosomes separated during Anaphase I and have arrived at poles in Telophase I.

  3. Conclude part (a): The stage immediately preceding Telophase I is Anaphase I.

  4. For part (b), calculate the total cellular DNA content before cytokinesis I: unreplicated G1G_1 has 2C=4.0 pg2C = 4.0\text{ pg}, so the replicated cell in Anaphase I has 4C=2×4.0 pg=8.0 pg4C = 2 \times 4.0\text{ pg} = 8.0\text{ pg} and 1616 duplicated chromatid units.

Final answer

(a) Anaphase I; (b) 1616 chromatids and 8.0 pg8.0\text{ pg} of DNA

NEXT STEPS
Final Takeaways from Your Teacher
  • Review chromosome morphology diagrams comparing Anaphase I / Telophase I (dyads moving) versus Anaphase II / Telophase II (monads moving).

  • Practice tracking nn (chromosome number), chromatid count, and CC (DNA mass) through each individual phase of Meiosis I and II.

OverviewACEpath Teacher's Diagnosis

02 The student correctly identifies Metaphase I as the preceding stage but fails to account for pre-meiotic S-phase replication when determining the DNA mass, keeping it at 4.0 pg instead of doubling to 8.0 pg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Homologous chromosomes have separated to poles in Anaphase I   ⟹  \implies Preceding stage is Metaphase I

    Correct

    The observed cell with chromosomes clustered at the poles is in Telophase I   ⟹  \implies Preceding stage is Anaphase I

    You treated the cell with chromosomes already clustered at the opposite poles as Anaphase I. Because chromosomes arriving and gathering at opposite spindle poles characterizes Telophase I, the stage immediately preceding this configuration was Anaphase I.

  2. Step 2

    2n=162n = 16 replicated chromosomes at the metaphase plate   ⟹  Total chromatids=16×2=32 chromatids\implies \text{Total chromatids} = 16 \times 2 = 32\text{ chromatids}

    Correct

    16 chromatids16\text{ chromatids}

    You calculated chromatid count based on Metaphase I instead of Anaphase I, and counted individual strands rather than the meiotic chromatid structure standard (16 chromatids16\text{ chromatids} across the dividing dyads).

  3. Step 3

    DNA mass is unchanged before division: DNA=4.0 pg\text{DNA mass is unchanged before division: } \text{DNA} = 4.0\text{ pg}

    Correct

    DNA mass=2×4.0 pg=8.0 pg\text{DNA mass} = 2 \times 4.0\text{ pg} = 8.0\text{ pg} (4C4C)

    You assumed the DNA content remained at the unreplicated G1G_1 value of 4.0 pg4.0\text{ pg}. Prior to entering Meiosis I, the cell replicates its genome during meiotic S-phase, doubling the nuclear DNA content from 2C=4.0 pg2C = 4.0\text{ pg} to 4C=8.0 pg4C = 8.0\text{ pg}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that homologous chromosome separation occurs during Meiosis I.

You recognized that replicated chromosomes consist of two chromatids joined at a centromere.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Meiotic stage deduction and S-phase DNA doubling omission

You identified the pole-clustering stage as Anaphase I rather than Telophase I, which shifted your preceding stage from Anaphase I back to Metaphase I.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated meiotic division as starting with unreplicated G1G_1 DNA content (2C2C), forgetting that meiotic S-phase doubles cellular DNA mass to 4C4C before Prophase I begins.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Pole Clustering
  • Chromosomes migrating along spindle fibers indicate Anaphase; chromosomes arriving and clustering at opposite spindle poles define Telophase.

  • Check whether chromosomes are mid-migration (Anaphase) or already gathered at the poles (Telophase) before deducing the preceding stage.

Accounting for Meiotic S-Phase
  • Before entering Meiosis I, DNA replicates during S-phase, doubling the DNA mass from 2C2C to 4C4C while chromosome number (2n2n) remains unchanged.

  • Always multiply the unreplicated G1G_1 DNA content (2C2C) by 22 when determining DNA mass for any stage from Prophase I through Anaphase I.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the observed stage: 88 dyads (n=8n = 8) clustered at each spindle pole marks Telophase I.

  2. Determine the immediately preceding stage: the stage directly before Telophase I is Anaphase I.

  3. Calculate DNA mass during Anaphase I: prior to cytokinesis, the cell retains the replicated 4C4C DNA level, so DNA mass=2×4.0 pg=8.0 pg\text{DNA mass} = 2 \times 4.0\text{ pg} = 8.0\text{ pg}.

  4. State the chromatid complement: the preceding Anaphase I cell contains 1616 chromatids.

Final answer

(a) Anaphase I; (b) 1616 chromatids and 8.0 pg8.0\text{ pg} of DNA

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the morphological hallmark that separates late Anaphase (chromosomes actively moving apart) from Telophase (chromosomes gathered at poles).

  • Practice tracking both chromosome count (nn) and DNA mass (CC) across each checkpoint from G1→S→Meiosis I→Meiosis IIG_1 \to \text{S} \to \text{Meiosis I} \to \text{Meiosis II}.

OverviewACEpath Teacher's Diagnosis

03 The student assumes each pole already constitutes a separate cell during the preceding stage and calculates the chromatid number and DNA mass for a haploid cell instead of the whole dividing cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    The cell is in Anaphase I with 8 dyads at each pole   ⟹  \implies The immediately preceding stage is Metaphase I

    Correct

    The observed cell with chromosomes clustered at opposite poles is in Telophase I   ⟹  \implies The immediately preceding stage is Anaphase I

    Chromosomes already clustered at the opposite spindle poles define Telophase I (rather than Anaphase I, where they are actively migrating). Therefore, the stage that immediately preceded this configuration was Anaphase I, not Metaphase I.

  2. Step 2

    Considering the haploid set entering each pole: 8 chromosomes  ⟹  8×2=16 chromatids8\text{ chromosomes} \implies 8 \times 2 = 16\text{ chromatids}, DNA mass=4.0 pg\text{DNA mass} = 4.0\text{ pg}

    Correct

    Total cellular DNA mass=4C=2×4.0 pg=8.0 pg\text{Total cellular DNA mass} = 4C = 2 \times 4.0\text{ pg} = 8.0\text{ pg} (with 1616 chromatid structures)

    You restricted your calculation to a single pole's haploid set. During the preceding stage (Anaphase I), cytokinesis has not occurred, so the entire parent cell contains both sets, totaling 8.0 pg8.0\text{ pg} of DNA (4C4C level).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the 88 chromosomes at each pole are double-stranded dyads with two chromatids each.

You recognized the sequential order of meiotic stages leading backward in time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stage misidentification and single-pole accounting error

You evaluated only one pole rather than the whole dividing cell when determining total DNA content.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You mistook chromosomes clustered at the spindle poles for Anaphase I instead of Telophase I, and you treated the future daughter set at one pole as the entire cell's inventory before cytokinesis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguishing Anaphase I vs. Telophase I
  • Anaphase I features homologous chromosomes moving along the spindle; arrival and clustering at the poles marks Telophase I.

  • Always identify the current stage by whether chromosomes are actively moving between poles or already clustered at the poles.

Whole-Cell DNA vs. Single-Pole Complement
  • Until cytokinesis physically separates the cytoplasm into two daughter cells, the cell remains a single unit containing the full 4C4C DNA content (2×2C2 \times 2C).

  • Calculate DNA and chromatid totals across both poles combined for any stage before cytokinesis is complete.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the observed stage: dyads clustered at the two opposite poles represent Telophase I.

  2. Determine the immediately preceding stage: Telophase I is immediately preceded by Anaphase I.

  3. Calculate total DNA content in Anaphase I: prior to meiotic division, S-phase doubles G1G_1 DNA (2C=4.0 pg2C = 4.0\text{ pg}) to 4C=8.0 pg4C = 8.0\text{ pg}.

  4. Account for the whole cell: the single dividing cell contains 1616 chromatids (representing the 4C4C level) and 8.0 pg8.0\text{ pg} of DNA.

Final answer

(a) Anaphase I; (b) 1616 chromatids and 8.0 pg8.0\text{ pg} of DNA.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review visual and structural hallmarks that differentiate late anaphase from early telophase.

  • Practice tracking chromosome number (nn) versus DNA content (CC) across each meiotic stage from G1G_1 to gamete formation.

Lock it in

Similar question

01

A diploid plant species has 2n=202n = 20 and an unreplicated G1G_1 DNA content of 5.0 pg5.0\text{ pg}. A cytogeneticist observes a single meiotic cell where 1010 single-chromatid chromosomes (monads) are clustered at each of two poles. Identify: (a) the observed meiotic stage, (b) the immediately preceding stage, and (c) the total cellular DNA mass in pg during that preceding stage.

Answer

(a) Telophase II (monads at each pole in a haploid set of n=10n = 10). (b) Anaphase II. (c) In a secondary spermatocyte/oocyte undergoing Meiosis II, the cell has a 2C2C DNA content; therefore, DNA mass during Anaphase II is 5.0 pg5.0\text{ pg}.

02

In an animal with 2n=82n = 8 and a G1G_1 DNA level of 2C=2.4 pg2C = 2.4\text{ pg}, an inhibitor stops meiotic spindle elongation just as homologous chromosomes begin moving toward opposite poles. (a) Name this blocked stage. (b) State the total number of centromeres, the total number of chromatids, and the total cellular DNA mass in pg present in the cell at this point.

Answer

(a) Anaphase I (homologous chromosomes are disjoining). (b) 88 centromeres (each representing one replicated chromosome), 1616 chromatids (8×28 \times 2), and 4.8 pg4.8\text{ pg} of DNA (4C=2×2.4 pg4C = 2 \times 2.4\text{ pg}).

03

A fluorescence-activated cell sorting (FACS) profile of spermatogenesis in a mammal (2n=402n = 40, G1=3.2 pgG_1 = 3.2\text{ pg}) isolates three cell populations with DNA masses of 6.4 pg6.4\text{ pg}, 3.2 pg3.2\text{ pg}, and 1.6 pg1.6\text{ pg}. (a) Assign each DNA content to its corresponding meiotic cell type/stage (Primary spermatocyte in Meiosis I, Secondary spermatocyte in Meiosis II, or Spermatid). (b) For a cell containing 3.2 pg3.2\text{ pg} of DNA entering Metaphase II, specify the number of chromosomes and the number of chromatids aligned at the equatorial plate.

Answer

(a) 6.4 pg=4C6.4\text{ pg} = 4C (Primary spermatocyte in Meiosis I); 3.2 pg=2C3.2\text{ pg} = 2C (Secondary spermatocyte in Meiosis II); 1.6 pg=1C1.6\text{ pg} = 1C (Haploid spermatid). (b) In Metaphase II, there are n=20n = 20 replicated chromosomes and 4040 chromatids (20×220 \times 2) aligned at the plate.

Loading workspace…