Resources

An isolated skeletal muscle sarcoplasmic reticulum vesicle utilizes the primary active transport pump SERCA (extCa2+ ext{Ca}^{2+}-ATPase) to accumulate free calcium ions against a steep concentration gradient. At T=298 KT = 298\text{ K} (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), F=96485 C/molF = 96485\text{ C/mol}), the membrane potential across the vesicle membrane is negligible (ΔV=0 mV\Delta V = 0\text{ mV}). The pump couples the hydrolysis of 1 mol1\text{ mol} of ATP\text{ATP} (ΔGATP=−48.0 kJ/mol\Delta G_{\text{ATP}} = -48.0\text{ kJ/mol}) to the transport of exactly 2 mol2\text{ mol} of Ca2+\text{Ca}^{2+} from the cytosol into the lumen. If the concentration of free ionic calcium inside the lumen of the vesicle reaches [Ca2+]lumen=1.80 mM[\text{Ca}^{2+}]_{\text{lumen}} = 1.80\text{ mM} at the thermodynamic stalling limit where ΔGtransport=−ΔGATP\Delta G_{\text{transport}} = -\Delta G_{\text{ATP}}, calculate the resting cytosolic calcium concentration [Ca2+]cytosol[\text{Ca}^{2+}]_{\text{cytosol}} from which the pump was transporting.

Answer and steps

Final answer

[Ca2+]cytosol=1.15×10−7 M[\text{Ca}^{2+}]_{\text{cytosol}} = 1.15 \times 10^{-7}\text{ M} (or 0.115 μM0.115\ \mu\text{M})

Steps

01

Thermodynamic Equation for Primary Active Transport

The free energy change (ΔGtransport\Delta G_{\text{transport}}) required to move a solute against its electrochemical gradient across a biological membrane is given by:

ΔGtransport=n⋅[RTln⁡([CaX2+]lumen[CaX2+]cytosol)+zFΔV]\Delta G_{\text{transport}} = n \cdot \left[ R T \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) + z F \Delta V \right]

Where:

  • n=2 moln = 2\text{ mol}: the stoichiometry of CaX2+\ce{Ca^{2+}} ions transported per cycle (per mole of ATP hydrolyzed).
  • z=+2z = +2: the valence of the calcium ion (CaX2+\ce{Ca^{2+}}).
  • ΔV=0 mV=0 V\Delta V = 0\text{ mV} = 0\text{ V}: the vesicle membrane potential, making the electrical contribution zero (zFΔV=0z F \Delta V = 0).
  • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}): the universal gas constant.
  • T=298 KT = 298\text{ K}: absolute temperature.

The equation simplifies to purely chemical work:

ΔGtransport=2RTln⁡([CaX2+]lumen[CaX2+]cytosol)\Delta G_{\text{transport}} = 2 R T \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right)


02

Energetic Coupling at the Thermodynamic Limit

Active transport can proceed until the work required to transport the ions balances the free energy released by ATP hydrolysis:

ΔGtransport=−ΔGATP=−(−48.0 kJ/mol)=+48.0 kJ/mol=48,000 J/mol\Delta G_{\text{transport}} = -\Delta G_{\text{ATP}} = -(-48.0\text{ kJ/mol}) = +48.0\text{ kJ/mol} = 48{,}000\text{ J/mol}

Equating the thermodynamic work to the available free energy:

2RTln⁡([CaX2+]lumen[CaX2+]cytosol)=48,000 J/mol2 R T \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = 48{,}000\text{ J/mol}


03

Calculating the Concentration Gradient

First, calculate the product RTR T:

RT=8.314 J/(mol⋅K)×298 K≈2477.6 J/molR T = 8.314\text{ J}/(\text{mol}\cdot\text{K}) \times 298\text{ K} \approx 2477.6\text{ J/mol}

Substitute RTR T into the expression:

2×2477.6×ln⁡([CaX2+]lumen[CaX2+]cytosol)=48,0002 \times 2477.6 \times \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = 48{,}000

ln⁡([CaX2+]lumen[CaX2+]cytosol)=48,0004955.2≈9.66−9.69\ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = \frac{48{,}000}{4955.2} \approx 9.66 - 9.69

Taking the natural exponential:

[CaX2+]lumen[CaX2+]cytosol=e9.66≈1.57×104\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{9.66} \approx 1.57 \times 10^4


04

Determination of Resting Cytosolic [CaX2+][\ce{Ca^{2+}}]

Given [CaX2+]lumen=1.80 mM=1.80×10−3 M[\ce{Ca^{2+}}]_{\text{lumen}} = 1.80\text{ mM} = 1.80 \times 10^{-3}\text{ M}:

[CaX2+]cytosol=[CaX2+]lumene9.66=1.80×10−3 M1.57×104≈1.15×10−7 M=0.115 μM[\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{e^{9.66}} = \frac{1.80 \times 10^{-3}\text{ M}}{1.57 \times 10^4} \approx 1.15 \times 10^{-7}\text{ M} = 0.115\ \mu\text{M}

Common Pitfall: Forgetting the stoichiometric factor (n=2n = 2) is the most frequent error. The SERCA pump moves 22 calcium ions per molecule of ATP hydrolyzed, so the free energy from one mole of ATP fuels the movement of two moles of CaX2+\ce{Ca^{2+}}, halving the energy available per individual mole of CaX2+\ce{Ca^{2+}}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the stoichiometry of 2 mol of Ca²⁺ transported per mol of ATP, equating the entire 48.0 kJ/mol of ATP hydrolysis energy to the transport of only 1 mol of Ca²⁺.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔGtransport=R⋅T⋅ln⁡([CaX2+]lumen[CaX2+]cytosol)  ⟹  48000=8.314⋅298⋅ln⁡(1.80[CaX2+]cytosol)\Delta G_{\text{transport}} = R \cdot T \cdot \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) \implies 48000 = 8.314 \cdot 298 \cdot \ln\left(\frac{1.80}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right)

    Correct

    ΔGtransport=n⋅RTln⁡([CaX2+]lumen[CaX2+]cytosol)  ⟹  48000=2×8.314×298×ln⁡(1.80[CaX2+]cytosol)\Delta G_{\text{transport}} = n \cdot R T \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) \implies 48000 = 2 \times 8.314 \times 298 \times \ln\left(\frac{1.80}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right)

    You set up the chemical work equation and substituted the thermodynamic values cleanly, but you left out the stoichiometric multiplier n=2 mol of CaX2+n = 2\text{ mol of }\ce{Ca^{2+}} per mole of ATP hydrolyzed.

  2. Step 2

    ln⁡(1.80[CaX2+]cytosol)=480002477.57=19.3738\ln\left(\frac{1.80}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = \frac{48000}{2477.57} = 19.3738

    Correct

    ln⁡(1.80[CaX2+]cytosol)=480002×2477.57=480004955.14≈9.6869\ln\left(\frac{1.80}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = \frac{48000}{2 \times 2477.57} = \frac{48000}{4955.14} \approx 9.6869

    Your division and evaluation of RTRT were executed correctly, but the resulting exponent is twice as large as it should be due to the missing factor of 22 in the denominator.

  3. Step 3

    1.80[CaX2+]cytosol=e(19.3738)=2.594×108  ⟹  [CaX2+]cytosol=1.802.594×108=6.94×10−9 mM\frac{1.80}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{(19.3738)} = 2.594 \times 10^8 \implies [\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{1.80}{2.594 \times 10^8} = 6.94 \times 10^{-9}\text{ mM}

    Correct

    1.80 mM[CaX2+]cytosol=e9.6869≈1.61×104  ⟹  [CaX2+]cytosol=1.80 mM1.61×104≈1.12×10−4 mM=1.15×10−7 M\frac{1.80\text{ mM}}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{9.6869} \approx 1.61 \times 10^4 \implies [\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{1.80\text{ mM}}{1.61 \times 10^4} \approx 1.12 \times 10^{-4}\text{ mM} = 1.15 \times 10^{-7}\text{ M}

    You followed through with mathematically valid exponentiation and isolation, but the final numerical value inherits the missing stoichiometric factor from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the thermodynamic limit occurs where the free energy of transport balances the free energy of ATP hydrolysis.

You accurately calculated the thermal energy term RT=8.314×298=2477.57 J/molRT = 8.314 \times 298 = 2477.57\text{ J/mol}.

You correctly used natural exponentiation to isolate the unknown cytosolic concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Transport Stoichiometry Factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the free energy of ATP hydrolysis as if it transports only a single mole of ions, overlooking the stoichiometry coefficient n=2n = 2 in the primary active transport equation ΔG=n⋅[RTln⁡(C2/C1)+zFΔV]\Delta G = n \cdot [RT \ln(C_2/C_1) + zF\Delta V].

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Ion Stoichiometry per ATP
  • For a pump moving nn ions per ATP, the total chemical work is ΔGtransport=n⋅RTln⁡(CdestinationCsource)\Delta G_{\text{transport}} = n \cdot R T \ln\left(\frac{C_{\text{destination}}}{C_{\text{source}}}\right).

  • Always write down the stoichiometric coupling ratio (nn) explicitly before substituting numbers into the free energy equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the stoichiometric coefficient n=2n = 2 into the free energy balance: 48,000 J/mol=2×RTln⁡([CaX2+]lumen[CaX2+]cytosol)48{,}000\text{ J/mol} = 2 \times R T \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right).

  2. Divide by 2RT=2×2477.57=4955.14 J/mol2 RT = 2 \times 2477.57 = 4955.14\text{ J/mol} to obtain ln⁡(1.80 mM[CaX2+]cytosol)≈9.687\ln\left(\frac{1.80\text{ mM}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) \approx 9.687.

  3. Exponentiate to find the concentration ratio: 1.80 mM[CaX2+]cytosol=e9.687≈1.61×104\frac{1.80\text{ mM}}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{9.687} \approx 1.61 \times 10^4.

  4. Solve for the resting concentration: [CaX2+]cytosol=1.80×10−3 M1.61×104≈1.15×10−7 M=0.115 μM[\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{1.80 \times 10^{-3}\text{ M}}{1.61 \times 10^4} \approx 1.15 \times 10^{-7}\text{ M} = 0.115\ \mu\text{M}.

Final answer

[CaX2+]cytosol=1.15×10−7 M[\ce{Ca^{2+}}]_{\text{cytosol}} = 1.15 \times 10^{-7}\text{ M} (or 0.115 μM0.115\ \mu\text{M})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the stoichiometric ratios of key primary active transporters (e.g., SERCA pumps 2CaX2+2\ce{Ca^{2+}} per ATP; NaX+/KX+\ce{Na+/K+}-ATPase pumps 3NaX+3\ce{Na+} out and 2KX+2\ce{K+} in per ATP).

  • Practice checking whether ΔGATP\Delta G_{\text{ATP}} applies to the overall cycle or per individual ion transported.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the concentration ratio in the free energy formula as cytosolic over lumen concentration, inverting the gradient ratio and obtaining an impossibly large cytosolic concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔGtransport=2⋅R⋅T⋅ln⁡([Ca2+]cytosol/[Ca2+]lumen)=48000 J/mol\Delta G_{\text{transport}} = 2 \cdot R \cdot T \cdot \ln ([\text{Ca}^{2+}]_{\text{cytosol}} / [\text{Ca}^{2+}]_{\text{lumen}}) = 48000\text{ J/mol}

    Correct

    ΔGtransport=2RTln⁡([Ca2+]lumen[Ca2+]cytosol)=48000 J/mol\Delta G_{\text{transport}} = 2 R T \ln\left(\frac{[\text{Ca}^{2+}]_{\text{lumen}}}{[\text{Ca}^{2+}]_{\text{cytosol}}}\right) = 48000\text{ J/mol}

    You placed the cytosolic concentration in the numerator and the lumen concentration in the denominator. Active transport moves ions from the cytosol (initial state) into the lumen (final state), so the thermodynamic work expression requires ln⁡(Cfinal/Cinitial)=ln⁡([Ca2+]lumen/[Ca2+]cytosol)\ln(C_{\text{final}} / C_{\text{initial}}) = \ln([\text{Ca}^{2+}]_{\text{lumen}} / [\text{Ca}^{2+}]_{\text{cytosol}}). Because transport into the lumen requires energy (ΔG>0\Delta G > 0), the ratio inside the logarithm must exceed 11.

  2. Step 2

    ln⁡([Ca2+]cytosol/1.80)=9.6869  ⟹  [Ca2+]cytosol/1.80=e(9.6869)=16105\ln ([\text{Ca}^{2+}]_{\text{cytosol}} / 1.80) = 9.6869 \implies [\text{Ca}^{2+}]_{\text{cytosol}} / 1.80 = e^{(9.6869)} = 16105

    Correct

    ln⁡(1.80 mM[Ca2+]cytosol)=9.6869  ⟹  1.80 mM[Ca2+]cytosol=16105\ln\left(\frac{1.80\text{ mM}}{[\text{Ca}^{2+}]_{\text{cytosol}}}\right) = 9.6869 \implies \frac{1.80\text{ mM}}{[\text{Ca}^{2+}]_{\text{cytosol}}} = 16105

    Your numerical computation of 480002×8.314×298≈9.6869\frac{48000}{2 \times 8.314 \times 298} \approx 9.6869 and its exponentiation e9.6869≈16105e^{9.6869} \approx 16105 were executed correctly, but this step inherits the inverted ratio from Step 1.

  3. Step 3

    [Ca2+]cytosol=1.80⋅16105=28989 mM[\text{Ca}^{2+}]_{\text{cytosol}} = 1.80 \cdot 16105 = 28989\text{ mM}

    Correct

    [Ca2+]cytosol=1.80 mM16105≈1.12×10−4 mM=1.12×10−7 M[\text{Ca}^{2+}]_{\text{cytosol}} = \frac{1.80\text{ mM}}{16105} \approx 1.12 \times 10^{-4}\text{ mM} = 1.12 \times 10^{-7}\text{ M} (or 1.15×10−7 M1.15 \times 10^{-7}\text{ M} using unrounded constants)

    Because of the inverted ratio, you multiplied by the accumulation factor instead of dividing by it. This yielded a cytosolic calcium concentration of nearly 29 M29\text{ M}, whereas resting cytosolic calcium is maintained at sub-micromolar levels.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly included the stoichiometric coefficient n=2n = 2 for the transport of two calcium ions per cycle.

You correctly equated the transport work to the free energy available from ATP hydrolysis (48000 J/mol48000\text{ J/mol}).

You performed the algebraic exponentiation and multi-digit arithmetic accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Concentration Gradient Ratio
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the initial and final states in the chemical potential term. In membrane thermodynamics, moving a solute from compartment A (cytosol) to compartment B (lumen) has a chemical work term proportional to ln⁡(Cfinal/Cinitial)=ln⁡(Cdestination/Csource)\ln(C_{\text{final}} / C_{\text{initial}}) = \ln(C_{\text{destination}} / C_{\text{source}}). Inverting this ratio switches active pumping against a gradient with passive downhill diffusion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Directionality Check
  • For an uphill transport process requiring work (ΔG>0\Delta G > 0), the concentration ratio inside ln⁡(Cdestination/Csource)\ln(C_{\text{destination}} / C_{\text{source}}) must be greater than 11.

  • Always verify that Cdestination>CsourceC_{\text{destination}} > C_{\text{source}} when setting ΔG>0\Delta G > 0 in the absence of an opposing membrane potential.

Biological Reality Check
  • Resting cytosolic free calcium in animal cells is tightly buffered between 10−8 M10^{-8}\text{ M} and 10−7 M10^{-7}\text{ M} (0.01−0.1 μM0.01 - 0.1\ \mu\text{M}).

  • If your calculated cytosolic concentration exceeds the organellar concentration (or exceeds physiological millimolar limits), check whether your ratio was accidentally inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the chemical work required to pump 2 mol2\text{ mol} of Ca2+\text{Ca}^{2+} from cytosol to lumen: ΔGtransport=2RTln⁡([Ca2+]lumen[Ca2+]cytosol)\Delta G_{\text{transport}} = 2 R T \ln\left(\frac{[\text{Ca}^{2+}]_{\text{lumen}}}{[\text{Ca}^{2+}]_{\text{cytosol}}}\right).

  2. Equate to available free energy from ATP: 2RTln⁡([Ca2+]lumen[Ca2+]cytosol)=48000 J/mol2 R T \ln\left(\frac{[\text{Ca}^{2+}]_{\text{lumen}}}{[\text{Ca}^{2+}]_{\text{cytosol}}}\right) = 48000\text{ J/mol}.

  3. Divide by 2RT2 R T: ln⁡([Ca2+]lumen[Ca2+]cytosol)=480002×8.314×298=480004955.14≈9.6869\ln\left(\frac{[\text{Ca}^{2+}]_{\text{lumen}}}{[\text{Ca}^{2+}]_{\text{cytosol}}}\right) = \frac{48000}{2 \times 8.314 \times 298} = \frac{48000}{4955.14} \approx 9.6869.

  4. Take the exponential of both sides: [Ca2+]lumen[Ca2+]cytosol=e9.6869≈16105\frac{[\text{Ca}^{2+}]_{\text{lumen}}}{[\text{Ca}^{2+}]_{\text{cytosol}}} = e^{9.6869} \approx 16105.

  5. Solve for [Ca2+]cytosol[\text{Ca}^{2+}]_{\text{cytosol}}: [Ca2+]cytosol=1.80×10−3 M16105≈1.12×10−7 M[\text{Ca}^{2+}]_{\text{cytosol}} = \frac{1.80 \times 10^{-3}\text{ M}}{16105} \approx 1.12 \times 10^{-7}\text{ M} (or 1.15×10−7 M1.15 \times 10^{-7}\text{ M} using RT≈2478 J/molRT \approx 2478\text{ J/mol}).

Final answer

[Ca2+]cytosol=1.15×10−7 M[\text{Ca}^{2+}]_{\text{cytosol}} = 1.15 \times 10^{-7}\text{ M} (or 0.115 μM0.115\ \mu\text{M})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice defining the chemical gradient as ln⁡(Cdestination/Csource)\ln(C_{\text{destination}} / C_{\text{source}}) whenever calculating active transport work.

  • Perform a sanity check on calculated biological concentrations (e.g., cytosolic [extCa2+][ ext{Ca}^{2+}] must be orders of magnitude lower than lumen [extCa2+][ ext{Ca}^{2+}]).

OverviewACEpath Teacher's Diagnosis

03 The student erroneously includes an electrical work term z · F · ΔV with z = 2 despite the problem stating the membrane potential ΔV is 0 mV, dividing the energy by Faraday's constant and obtaining an erroneous exponent.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔGper_Ca=480002=24000 J/mol\Delta G_{\text{per\_Ca}} = \frac{48000}{2} = 24000\text{ J/mol}

  2. Step 2

    ln⁡([CaX2+]lumen[CaX2+]cytosol)=24000R⋅T⋅F=240002477.57⋅96485=1.004×10−4\ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = \frac{24000}{R \cdot T \cdot F} = \frac{24000}{2477.57 \cdot 96485} = 1.004 \times 10^{-4}

    Correct

    ln⁡([CaX2+]lumen[CaX2+]cytosol)=ΔGper_CaRT=24,000 J/mol8.314×298 J/mol≈9.687\ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = \frac{\Delta G_{\text{per\_Ca}}}{R T} = \frac{24{,}000\text{ J/mol}}{8.314 \times 298\text{ J/mol}} \approx 9.687

    You divided by Faraday's constant FF in the chemical work relation. Because ΔG\Delta G is expressed in J/mol\text{J/mol} and the membrane potential is zero (ΔV=0 mV\Delta V = 0\text{ mV}), the chemical gradient equation is purely ΔG=RTln⁡([CaX2+]lumen/[CaX2+]cytosol)\Delta G = R T \ln([\ce{Ca^{2+}}]_{\text{lumen}}/[\ce{Ca^{2+}}]_{\text{cytosol}}). Dividing by FF makes the expression dimensionally inconsistent.

  3. Step 3

    [CaX2+]lumen[CaX2+]cytosol=e(0.0001004)=1.0001\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{(0.0001004)} = 1.0001

    Correct

    [CaX2+]lumen[CaX2+]cytosol=e9.687≈1.61×104\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{9.687} \approx 1.61 \times 10^4

    Your exponentiation followed logically from your value in Step 2, but it was affected by the extra factor of FF.

  4. Step 4

    [CaX2+]cytosol=1.801.0001=1.80 mM[\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{1.80}{1.0001} = 1.80\text{ mM}

    Correct

    [CaX2+]cytosol=1.80×10−3 M1.61×104≈1.12×10−7 M=0.112 μM[\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{1.80 \times 10^{-3}\text{ M}}{1.61 \times 10^4} \approx 1.12 \times 10^{-7}\text{ M} = 0.112\ \mu\text{M} (or 1.15×10−7 M1.15 \times 10^{-7}\text{ M} using rounded intermediate values)

    You substituted your concentration ratio correctly into the final equation, but the numerical result was skewed by the error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the 2:12:1 transport stoichiometry for the SERCA pump.

You correctly allocated the total available ATP hydrolysis energy across the two transported calcium ions to obtain 24,000 J/mol24{,}000\text{ J/mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional confusion / Unnecessary Faraday constant

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the thermodynamic free energy equation ΔG=RTln⁡(C2/C1)\Delta G = R T \ln(C_2/C_1) (in units of J/mol\text{J/mol}) with the electrical potential expression from the Nernst equation ΔE=RTzFln⁡(C2/C1)\Delta E = \frac{R T}{z F} \ln(C_2/C_1) (in units of volts), leading you to divide by Faraday's constant FF even though ΔV=0\Delta V = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of the thermodynamic driving force
  • The chemical free energy change is ΔG=RTln⁡(CfinalCinitial)\Delta G = R T \ln\left(\frac{C_{\text{final}}}{C_{\text{initial}}}\right), where RTR T has units of J/mol\text{J/mol} and the logarithm is dimensionless.

  • Only introduce Faraday's constant FF when converting between molar free energy (J/mol\text{J/mol}) and electrical potential (volts\text{volts}), via the electrical work term zFΔVz F \Delta V.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the chemical potential gradient equation without FF: ln⁡([CaX2+]lumen[CaX2+]cytosol)=ΔGper_CaRT=24,000 J/mol8.314×298 J/mol≈9.687\ln\left(\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = \frac{\Delta G_{\text{per\_Ca}}}{R T} = \frac{24{,}000\text{ J/mol}}{8.314 \times 298\text{ J/mol}} \approx 9.687.

  2. Evaluate the concentration gradient ratio: [CaX2+]lumen[CaX2+]cytosol=e9.687≈1.61×104\frac{[\ce{Ca^{2+}}]_{\text{lumen}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}} = e^{9.687} \approx 1.61 \times 10^4.

  3. Solve for the resting cytosolic calcium concentration: [CaX2+]cytosol=1.80×10−3 M1.61×104≈1.12×10−7 M=0.112 μM[\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{1.80 \times 10^{-3}\text{ M}}{1.61 \times 10^4} \approx 1.12 \times 10^{-7}\text{ M} = 0.112\ \mu\text{M} (or 1.15×10−7 M1.15 \times 10^{-7}\text{ M} using intermediate rounding e9.66e^{9.66}).

Final answer

[CaX2+]cytosol=1.15×10−7 M[\ce{Ca^{2+}}]_{\text{cytosol}} = 1.15 \times 10^{-7}\text{ M} (or 0.115 μM0.115\ \mu\text{M})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between chemical work ΔGchem=RTln⁡(C2/C1)\Delta G_{\text{chem}} = R T \ln(C_2/C_1) and electrical work welec=zFΔVw_{\text{elec}} = z F \Delta V.

  • Always perform a unit check on expressions inside logarithms and exponents to verify they remain strictly dimensionless.

Lock it in

Similar question

01

A membrane transport pump moves 1 mol1\text{ mol} of neutral molecule X\text{X} per mole of ATP hydrolyzed (ΔGATP=−30.0 kJ/mol\Delta G_{\text{ATP}} = -30.0\text{ kJ/mol}) at T=300 KT = 300\text{ K} (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}). What is the maximum concentration ratio [X]in/[X]out[\text{X}]_{\text{in}}/[\text{X}]_{\text{out}} this pump can generate at thermodynamic equilibrium?

Answer

[X]in[X]out≈1.66×105\frac{[\text{X}]_{\text{in}}}{[\text{X}]_{\text{out}}} \approx 1.66 \times 10^5.

  1. At stalling, ΔGtransport=−ΔGATP=30,000 J/mol\Delta G_{\text{transport}} = -\Delta G_{\text{ATP}} = 30{,}000\text{ J/mol}.
  2. With n=1n = 1: ln⁡([X]in[X]out)=30,0008.314×300=30,0002494.2≈12.028\ln\left(\frac{[\text{X}]_{\text{in}}}{[\text{X}]_{\text{out}}}\right) = \frac{30{,}000}{8.314 \times 300} = \frac{30{,}000}{2494.2} \approx 12.028.
  3. Exponentiate: [X]in[X]out=e12.028≈1.66×105\frac{[\text{X}]_{\text{in}}}{[\text{X}]_{\text{out}}} = e^{12.028} \approx 1.66 \times 10^5.
02

Suppose an engineered calcium pump hydrolyzes 1 mol1\text{ mol} of ATP (providing 50.0 kJ/mol50.0\text{ kJ/mol}) to transport 3 mol3\text{ mol} of CaX2+\ce{Ca^{2+}} into a storage organelle where ΔV=0 mV\Delta V = 0\text{ mV} and T=298 KT = 298\text{ K} (RT=2478 J/molRT = 2478\text{ J/mol}). If the organelle calcium concentration is 2.0 mM2.0\text{ mM}, calculate the minimum cytosolic [CaX2+][\ce{Ca^{2+}}] at the stalling limit.

Answer

[CaX2+]cytosol≈2.45×10−3 mM=2.45 μM[\ce{Ca^{2+}}]_{\text{cytosol}} \approx 2.45 \times 10^{-3}\text{ mM} = 2.45\ \mu\text{M}.

  1. Set up coupling with n=3n = 3: 3RTln⁡([CaX2+]in[CaX2+]cytosol)=50,000 J/mol3 RT \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{in}}}{[\ce{Ca^{2+}}]_{\text{cytosol}}}\right) = 50{,}000\text{ J/mol}.
  2. Divide by 3RT=3×2478=7434 J/mol3 RT = 3 \times 2478 = 7434\text{ J/mol}: ln⁡(ratio)=50,0007434≈6.726\ln(\text{ratio}) = \frac{50{,}000}{7434} \approx 6.726.
  3. Solve for concentration: [CaX2+]cytosol=2.0 mMe6.726=2.0816.6≈2.45×10−3 mM[\ce{Ca^{2+}}]_{\text{cytosol}} = \frac{2.0\text{ mM}}{e^{6.726}} = \frac{2.0}{816.6} \approx 2.45 \times 10^{-3}\text{ mM}.
03

A primary active proton pump transports HX+\ce{H+} out of the cell across a membrane with potential ΔV=Vout−Vin=+60 mV\Delta V = V_{\text{out}} - V_{\text{in}} = +60\text{ mV} at T=298 KT = 298\text{ K} (RT=2478 J/molRT = 2478\text{ J/mol}, F=96485 J/(V⋅mol)F = 96485\text{ J/(V}\cdot\text{mol)}). The pump consumes 1 mol1\text{ mol} of ATP (ΔG=−31.0 kJ/mol\Delta G = -31.0\text{ kJ/mol}) to pump 2 mol2\text{ mol} of HX+\ce{H+}. Calculate the maximum pH difference (ΔpH=pHin−pHout\Delta\text{pH} = \text{pH}_{\text{in}} - \text{pH}_{\text{out}}) that can be sustained across this membrane.

Answer

ΔpH≈1.70\Delta\text{pH} \approx 1.70.

  1. Electrical work per mole of HX+\ce{H+}: zFΔV=(+1)(96485)(0.060)=5789 J/molz F \Delta V = (+1)(96485)(0.060) = 5789\text{ J/mol}.
  2. Energy balance for 2 mol2\text{ mol} of HX+\ce{H+}: 2×[RTln⁡([HX+]out/[HX+]in)+5789]=31,000 J/mol2 \times [RT \ln([\ce{H+}]_{\text{out}}/[\ce{H+}]_{\text{in}}) + 5789] = 31{,}000\text{ J/mol}.
  3. Divide by 22: RTln⁡([HX+]out/[HX+]in)+5789=15,500  ⟹  RTln⁡([HX+]out/[HX+]in)=9711 J/molRT \ln([\ce{H+}]_{\text{out}}/[\ce{H+}]_{\text{in}}) + 5789 = 15{,}500 \implies RT \ln([\ce{H+}]_{\text{out}}/[\ce{H+}]_{\text{in}}) = 9711\text{ J/mol}.
  4. ln⁡([HX+]out/[HX+]in)=97112478≈3.919\ln([\ce{H+}]_{\text{out}}/[\ce{H+}]_{\text{in}}) = \frac{9711}{2478} \approx 3.919.
  5. Convert to log⁡10\log_{10}/pH difference: ΔpH=log⁡10([HX+]out[HX+]in)=3.919ln⁡(10)≈1.70\Delta\text{pH} = \log_{10}\left(\frac{[\ce{H+}]_{\text{out}}}{[\ce{H+}]_{\text{in}}}\right) = \frac{3.919}{\ln(10)} \approx 1.70.
Loading workspace…