Resources
A synthetic mRNA encoding a regulatory peptide of amino acids undergoes an insertion of consecutive adenine nucleotides immediately following the tenth codon (). Assume the downstream inserted adenines do not form an immediate in-frame stop codon. Determine: (a) the threshold mathematical condition for that preserves the wild-type downstream reading frame (yielding an in-frame insertion rather than a frameshift mutation), and (b) the net number of extra amino acid residues incorporated into the full-length translated peptide when .
Answer and steps
Final answer
(a) (where is an integer multiple of , for ); (b) Exactly extra amino acid residues.
Steps
Part (a): Condition for Preserving the Reading Frame
- Triplets and the Reading Frame: Translation of an mRNA molecule proceeds in non-overlapping nucleotide triplets known as codons. Each codon consists of exactly nucleotides and corresponds to a single amino acid (or a stop signal).
-
Effect of Nucleotide Insertions: When an insertion of nucleotides occurs within a coding sequence:
- If the number of inserted nucleotides is not divisible by , the grouping of every subsequent triplet downstream is shifted by or nucleotides. This results in a frameshift mutation, drastically altering the downstream amino acid sequence and typically creating a premature stop codon.
- If the number of inserted nucleotides is a multiple of , the original reading frame downstream of the insertion remains intact. This is an in-frame insertion, which simply adds whole codons without shifting downstream triplet boundaries.
- Mathematical Formulation: To maintain the wild-type downstream reading frame, the change in the reading frame position must be zero modulo : Equivalently, for , where is a positive integer ().
Part (b): Net Number of Extra Amino Acid Residues for
- Codon Calculation: Given : Because is a multiple of , this represents an in-frame insertion.
- Number of Extra Residues: Each inserted triplet of adenines () forms a complete codon encoding the amino acid lysine (). The number of additional codons added to the coding region is:
- Resulting Peptide: Because none of these newly introduced codons introduce a stop codon (in the standard genetic code, codes for lysine, not termination), the ribosome translates all additional codons before continuing with codon through codon . Therefore, exactly extra amino acid residues are incorporated into the resulting polypeptide.
Typical errors
01 The student confuses the triplet codon rule with nucleotide base pairing or a binary rule, incorrectly requiring n to be an even number or multiple of 2, leading to an incorrect residue count of 15 / 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Codons require paired nucleotides must be a multiple of :
Correct(or for )
You treated a codon as consisting of paired nucleotides. In mRNA translation, genetic codons are non-overlapping triplets of nucleotides. An insertion must add a multiple of nucleotides () to avoid shifting the downstream triplet reading frame.
- Step 2Correct
Because this step carried forward the divisor of from your previous assumption, it yielded a fractional value of . Dividing nucleotides by the true codon size of nucleotides per residue gives exactly full codons, adding complete amino acid residues.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that preserving the reading frame requires the insertion size to be a multiple of the codon unit size, and that the number of extra residues is found by dividing the total inserted nucleotides by that unit size.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing by instead of , leading to a fractional peptide residue count of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated double-stranded DNA base-pairing (which involves pairs of nucleotides) with the genetic code's translation mechanism, where mRNA codons are non-overlapping triplets of nucleotides.
REASONING PATH
Your ACEpath teacher’s suggested approach- Codon Unit Size
An mRNA codon consists of exactly consecutive nucleotides that specify a single amino acid residue.
Always divide the number of inserted coding nucleotides by , not .
- Discrete Peptide Residues
Peptide translation adds discrete, intact amino acid residues, so the resulting residue count must always be an integer.
If a division produces a fractional amino acid count, re-check whether the codon size or the reading frame alignment was applied correctly.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that each mRNA codon consists of consecutive nucleotides translated non-overlappingly from to .
Formulate the condition to preserve the reading frame: the number of inserted nucleotides must not shift the triplet phase, meaning must be divisible by , so or for .
Calculate the extra amino acid residues for : evaluate complete in-frame codons encoding additional amino acid residues (specifically lysine, ).
(a) (or for ); (b) extra amino acid residues
02 The student correctly identifies the triplet condition in part (a) but assumes each inserted nucleotide corresponds directly to one amino acid residue in part (b), concluding that 15 extra residues are added.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Each codon has 3 nucleotides must be a multiple of 3 ()
- Step 2
Extra residues = 15 nucleotides = 15 residues
CorrectBecause each amino acid residue is specified by a 3-nucleotide codon, an insertion of 15 nucleotides creates codons, adding 5 extra residues rather than 15.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that genetic codons consist of three nucleotides.
You stated the correct mathematical condition () for an in-frame insertion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the number of inserted amino acid residues equal to the number of inserted nucleotides.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the conversion ratio between mRNA coding nucleotides and translated amino acid residues.
REASONING PATH
Your ACEpath teacher’s suggested approach- Triplet Coding Ratio
Always divide the number of in-frame coding nucleotides by to find the number of translated amino acid residues.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that each newly formed codon consists of nucleotides.
Calculate the number of added codons: .
Verify that the inserted codons (here , encoding lysine) do not introduce a premature stop codon.
Conclude that extra amino acid residues are added to the translated peptide.
(a) (); (b) Exactly extra amino acid residues.
03 The student correctly finds that 5 new codons are added but calculates the total peptide length (60 + 5 = 65) instead of the net extra amino acids requested.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The question asked for the net number of extra amino acid residues added to the peptide, which is . You calculated the new total peptide length () rather than stating the net increase.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the reading frame is preserved when the number of inserted nucleotides is a multiple of .
You accurately calculated that dividing nucleotides by yields additional codons.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou provided the final total length () instead of the net added residues ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the final overall length of a mutated polymer with the incremental or net difference requested by the prompt.
REASONING PATH
Your ACEpath teacher’s suggested approach- Target Quantity Check
Distinguish carefully between 'total resulting length' () and 'net extra residues' ().
Re-read the question's target variable before finalizing your answer: if asked for 'extra' or 'additional' units, stop at the increment rather than adding it to the baseline.
CORRECTED PATH
ACEpath Teacher's DemonstrationThe prompt specifically asks for the net number of extra amino acid residues added to the peptide, not the final total length.
Since each of the added codons encodes an amino acid without generating an immediate in-frame stop codon, exactly extra amino acid residues are added.
(a) ; (b) extra amino acid residues
Lock it in
How many nucleotides make up a single mRNA codon during translation?
nucleotides. The genetic code is read strictly in non-overlapping nucleotide triplets.
Similar question
A mutation inserts consecutive cytosine nucleotides into the middle of an exon encoding a polypeptide. Assuming no stop codon is created, determine whether this causes a frameshift and calculate how many additional amino acid residues are added to the protein.
Answer
No frameshift occurs; extra amino acid residues are added. Because is an exact multiple of (), the downstream reading frame is preserved. Dividing nucleotides by nucleotides per codon yields additional residues.
An insertion of nucleotides occurs inside the coding sequence of an enzyme. State the mathematical condition on that results in a frameshift mutation, and specify the two possible remainder values for .
Answer
A frameshift occurs when , which means . Any insertion length that is not a multiple of shifts the downstream codon boundary by either or nucleotides.
A wild-type mRNA coding sequence has nucleotides (excluding the stop codon) and produces a protein of amino acids. A simultaneous insertion of nucleotides at codon and an insertion of nucleotides at codon occur. Find the minimum positive integer such that the reading frame downstream of codon is restored to wild-type, and find the total amino acid length of the resulting translation product (assuming no premature stop codon is encountered).
Answer
, and the total protein length is amino acids. To restore the reading frame downstream, the combined insertion must be a multiple of : . The smallest positive integer is , making the total inserted nucleotides . Since codons are added, the new peptide length is amino acids.