Resources

In a proximal tubule epithelial cell of the nephron, apical microvilli amplify apical membrane surface area while basolateral membrane infoldings host a high density of Na+/K+\text{Na}^+/\text{K}^+-ATPase pumps alongside elongated mitochondria. If the Na+/K+\text{Na}^+/\text{K}^+-ATPase pumps transport 3 Na+3\text{ Na}^+ ions out of the cell and 2 K+2\text{ K}^+ ions into the cell per molecule of ATP hydrolyzed, calculate the minimum number of glucose molecules that must undergo complete aerobic cellular respiration (yielding an average of 30.0 ATP30.0\text{ ATP} per glucose) to actively export 1.80×108 Na+1.80 \times 10^{8}\text{ Na}^+ ions across the basolateral membrane.

Answer and steps

Final answer

2.00×106 glucose molecules2.00 \times 10^{6}\text{ glucose molecules}.

Steps

01

Calculate the Total ATP Required for Sodium Transport

Biological Context: Structure-Function Coupling

In kidney nephrons, proximal convoluted tubule cells perform large-scale reabsorption of solutes and water from the tubular filtrate back into the bloodstream.

  • Apical microvilli (brush border): Greatly increase surface area to maximize the passive entry of NaX+\ce{Na+} and cotransported nutrients from the lumen into the cell.
  • Basolateral infoldings and mitochondria: Deep folds packed with NaX+/KX+\ce{Na+/K+}-ATPase pumps actively export NaX+\ce{Na+} into the interstitial space. Densely clustered, elongated mitochondria sit adjacent to these infoldings to supply the continuous, massive amount of ATP\ce{ATP} required for primary active transport.

The NaX+/KX+\ce{Na+/K+}-ATPase enzyme hydrolyzes 1 molecule of ATP1\text{ molecule of ATP} for every 3 NaX+3\text{ }\ce{Na+} ions pumped out of the cytoplasm:

ATP molecules required=Total NaX+ ions exported3 NaX+ / ATP\text{ATP molecules required} = \frac{\text{Total }\ce{Na+}\text{ ions exported}}{3\text{ }\ce{Na+}\text{ / ATP}}

ATP molecules required=1.80×108 NaX+3 NaX+/ATP=6.00×107 ATP\text{ATP molecules required} = \frac{1.80 \times 10^{8}\text{ }\ce{Na+}}{3\text{ }\ce{Na+}/\text{ATP}} = 6.00 \times 10^{7}\text{ ATP}


02

Determine the Number of Glucose Molecules Needed

Each glucose molecule yields an average of 30.0 ATP30.0\text{ ATP} upon complete aerobic cellular respiration (glycolysis, pyruvate oxidation, citric acid cycle, and oxidative phosphorylation).

Dividing the total ATP\ce{ATP} demand by the yield per glucose:

Glucose molecules=Total ATP required30.0 ATP / glucose\text{Glucose molecules} = \frac{\text{Total ATP required}}{30.0\text{ ATP / glucose}}

Glucose molecules=6.00×107 ATP30.0 ATP / glucose=2.00×106 glucose molecules\text{Glucose molecules} = \frac{6.00 \times 10^{7}\text{ ATP}}{30.0\text{ ATP / glucose}} = 2.00 \times 10^{6}\text{ glucose molecules}

Common Pitfall: Confusing the transport ratio of NaX+\ce{Na+} (3 ions per ATP3\text{ ions per ATP}) with that of KX+\ce{K+} (2 ions per ATP2\text{ ions per ATP}). Ensure you divide by 33, the stoichiometric ratio specific to sodium ions.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the stoichiometry of Na+ and K+ transported per pump cycle, using 2 ions per ATP instead of 3 Na+ per ATP to find a requirement of 3.00 × 10⁶ glucose molecules.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ATP required\text{ATP required} = 1.80×1082\frac{1.80 \times 10^8}{2} = 9.00 ×\times 10^7 ATP\text{ ATP}

    Correct

    ATP required\text{ATP required} = 1.80×108 Na+3 Na+/ATP\frac{1.80 \times 10^8\text{ Na}^+}{3\text{ Na}^+/\text{ATP}} = 6.00 ×\times 10^7 ATP\text{ ATP}

    You divided by 22 instead of 33. Each cycle of the Na+/K+\text{Na}^+/\text{K}^+-ATPase hydrolyzes 1 ATP1\text{ ATP} to pump 3 Na+3\text{ Na}^+ out and 2 K+2\text{ K}^+ in. Because the problem asks for Na+\text{Na}^+ export, the correct stoichiometric divisor is 33.

  2. Step 2

    Glucose molecules\text{Glucose molecules} = 9.00×10730.0\frac{9.00 \times 10^7}{30.0} = 3.00 ×\times 10^6

    Correct

    Glucose molecules\text{Glucose molecules} = 6.00×107 ATP30.0 ATP/glucose\frac{6.00 \times 10^7\text{ ATP}}{30.0\text{ ATP/glucose}} = 2.00 ×\times 10^6

    You carried out the division by 30.0 ATP/glucose30.0\text{ ATP/glucose} correctly, but the result was altered by the incorrect ATP count from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that dividing total ATP required by the cellular respiration yield gives the number of glucose molecules.

You performed the numerical division accurately in both steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ion pump stoichiometry confusion

You divided the total Na+\text{Na}^+ ions by 22 rather than 33 when finding total ATP.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the stoichiometry of the two transported ions, applying the ratio for potassium (2 K+2\text{ K}^+ per ATP) to sodium (3 Na+3\text{ Na}^+ per ATP).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Ion to Pump Stoichiometry
  • The Na+/K+\text{Na}^+/\text{K}^+-ATPase always pumps 3 Na+3\text{ Na}^+ out and 2 K+2\text{ K}^+ in per ATP hydrolyzed.

  • Always write down the directional ratio explicitly: 3 Na+1 ATP\frac{3\text{ Na}^+}{1\text{ ATP}} and 2 K+1 ATP\frac{2\text{ K}^+}{1\text{ ATP}}, then select the ratio that matches the specific ion stated in the question.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the ATP needed using the correct stoichiometric ratio for sodium: ATP required=1.80×108 Na+3 Na+/ATP=6.00×107 ATP\text{ATP required} = \frac{1.80 \times 10^8\text{ Na}^+}{3\text{ Na}^+/\text{ATP}} = 6.00 \times 10^7\text{ ATP}.

  2. Divide by the respiratory yield per glucose molecule: Glucose molecules=6.00×107 ATP30.0 ATP/glucose=2.00×106\text{Glucose molecules} = \frac{6.00 \times 10^7\text{ ATP}}{30.0\text{ ATP/glucose}} = 2.00 \times 10^6.

Final answer

2.00×106 glucose molecules2.00 \times 10^6\text{ glucose molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic '3 Na-OUT, 2 K-IN, 1 ATP' (or 'no/ko: 3 Na+ out, 2 K+ in').

  • Label your unit cancellation clearly, such as ions×1 ATP3 Na+\text{ions} \times \frac{1\text{ ATP}}{3\text{ Na}^+}, to prevent swapping ion coefficients.

OverviewACEpath Teacher's Diagnosis

02 The student sums the total ions transported per cycle (3 Na+ + 2 K+ = 5 ions) instead of using only the exported Na+ ions, dividing by 5 to obtain 1.20 × 10⁶ glucose molecules.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total ions per ATP=3+2=5  ⟹  ATP required=(1.80×108)/5=3.60×107 ATP\text{Total ions per ATP} = 3 + 2 = 5 \implies \text{ATP required} = (1.80 \times 10^8)/5 = 3.60 \times 10^7\text{ ATP}

    Correct

    ATP required=1.80×108 Na+3 Na+/ATP=6.00×107 ATP\text{ATP required} = \frac{1.80 \times 10^8\text{ Na}^+}{3\text{ Na}^+/\text{ATP}} = 6.00 \times 10^7\text{ ATP}

    You summed Na+\text{Na}^+ and K+\text{K}^+ to get 5 ions/ATP5\text{ ions/ATP}. Because the target quantity (1.80×1081.80 \times 10^8) is strictly sodium ions exported, you must divide only by the 3 Na+3\text{ Na}^+ ions transported per ATP molecule.

  2. Step 2

    Glucose molecules=(3.60×107)/30.0=1.20×106\text{Glucose molecules} = (3.60 \times 10^7)/30.0 = 1.20 \times 10^6

    Correct

    Glucose molecules=6.00×107 ATP30.0 ATP/glucose=2.00×106 glucose molecules\text{Glucose molecules} = \frac{6.00 \times 10^7\text{ ATP}}{30.0\text{ ATP/glucose}} = 2.00 \times 10^6\text{ glucose molecules}

    You correctly set up and calculated the conversion from ATP to glucose using 30.0 ATP/glucose30.0\text{ ATP/glucose}, but your result was affected by the incorrect ATP value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly divided the required ATP by the average respiratory yield of 30.0 ATP30.0\text{ ATP} per glucose molecule.

You correctly carried out arithmetic operations using scientific notation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric mismatch in ion transport ratio

You added the exported sodium and imported potassium ions (3+2=5 ions3 + 2 = 5\text{ ions}) instead of isolating the stoichiometric ratio for sodium alone (3 Na+3\text{ Na}^+ per ATP).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing total ion turnover per enzymatic cycle (5 total ions5\text{ total ions}) with the specific stoichiometry of the target ion (3 Na+3\text{ Na}^+ exported per 1 ATP1\text{ ATP} hydrolyzed).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the target species to its specific stoichiometric ratio
  • When calculating energetic costs from primary active transport stoichiometry (3 Na+:2 K+:1 ATP3\text{ Na}^+ : 2\text{ K}^+ : 1\text{ ATP}), always divide the given ion count by its own transport coefficient, never by the sum of all transported ions.

  • Check whether the problem asks for total ion movement or a single ion type (here, only Na+\text{Na}^+), and use 1.80×108 Na+3 Na+/ATP\frac{1.80 \times 10^8\text{ Na}^+}{3\text{ Na}^+/\text{ATP}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total ATP needed by dividing target Na+\text{Na}^+ by 3 Na+/ATP3\text{ Na}^+/\text{ATP}: 1.80×1083=6.00×107 ATP\frac{1.80 \times 10^8}{3} = 6.00 \times 10^7\text{ ATP}.

  2. Divide the required ATP by the ATP yield per glucose: 6.00×107 ATP30.0 ATP/glucose=2.00×106 glucose molecules\frac{6.00 \times 10^7\text{ ATP}}{30.0\text{ ATP/glucose}} = 2.00 \times 10^6\text{ glucose molecules}.

Final answer

2.00×106 glucose molecules2.00 \times 10^6\text{ glucose molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with antiport or co-transport pumps, write down the specific ratio for each solute separately before calculating energy demand: 1 ATP↔3 Na+ out1\text{ ATP} \leftrightarrow 3\text{ Na}^+\text{ out} and 1 ATP↔2 K+ in1\text{ ATP} \leftrightarrow 2\text{ K}^+\text{ in}.

  • Review dimensional analysis for cellular energetics to ensure your units cancel properly (e.g., Na+÷(Na+/ATP)=ATP\text{Na}^+ \div (\text{Na}^+/\text{ATP}) = \text{ATP}).

OverviewACEpath Teacher's Diagnosis

03 The student inverts the stoichiometric conversion and multiplies the number of Na+ ions by 3 instead of dividing by 3, yielding 1.80 × 10⁷ glucose molecules.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ATP required=(1.80×108)×3=5.40×108 ATP\text{ATP required} = (1.80 \times 10^{8}) \times 3 = 5.40 \times 10^{8}\text{ ATP}

    Correct

    ATP required=1.80×108 Na+3 Na+/ATP=6.00×107 ATP\text{ATP required} = \frac{1.80 \times 10^{8}\text{ Na}^+}{3\text{ Na}^+/\text{ATP}} = 6.00 \times 10^{7}\text{ ATP}

    Because one ATP molecule pumps out 3 Na+3\text{ Na}^+ ions, fewer ATP molecules are needed than the total number of ions. You should divide by 33 rather than multiply by 33.

  2. Step 2

    Glucose molecules=(5.40×108)/30.0=1.80×107\text{Glucose molecules} = (5.40 \times 10^{8}) / 30.0 = 1.80 \times 10^{7}

    Correct

    Glucose molecules=6.00×107 ATP30.0 ATP / glucose=2.00×106 glucose molecules\text{Glucose molecules} = \frac{6.00 \times 10^{7}\text{ ATP}}{30.0\text{ ATP / glucose}} = 2.00 \times 10^{6}\text{ glucose molecules}

    Your division by 30.0 ATP/glucose30.0\text{ ATP/glucose} was conceptually correct, but the calculation inherited the incorrect ATP value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the total ATP requirement must be divided by 30.0 ATP30.0\text{ ATP} to find the corresponding number of glucose molecules.

You carried out the arithmetic operations and power-of-ten calculations accurately based on your setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted stoichiometric conversion ratio

You set up the ratio as 3 ATP per Na+3\text{ ATP per Na}^+ instead of 3 Na+ per ATP3\text{ Na}^+\text{ per ATP}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the conversion factor during dimensional analysis: multiplying instead of dividing by the stoichiometric coefficient when converting from transported ions to hydrolyzed ATP molecules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Always write full units in your conversion factors: ions×(1 ATP3 ions)=ATP\text{ions} \times \left(\frac{1\text{ ATP}}{3\text{ ions}}\right) = \text{ATP}.

  • Check whether multiplying or dividing makes the units cancel and yields a smaller number of ATP molecules than ions.

Sanity Check on Enzyme Stoichiometry
  • One ATP molecule moves multiple sodium ions (3 Na+3\text{ Na}^+).

  • Ensure the calculated ATP requirement is strictly one-third of the total number of sodium ions transported.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the total number of exported sodium ions by the pump stoichiometry: 1.80×108 Na+3 Na+/ATP=6.00×107 ATP\frac{1.80 \times 10^{8}\text{ Na}^+}{3\text{ Na}^+/\text{ATP}} = 6.00 \times 10^{7}\text{ ATP}.

  2. Divide this ATP demand by the yield per glucose: 6.00×107 ATP30.0 ATP/glucose=2.00×106 glucose molecules\frac{6.00 \times 10^{7}\text{ ATP}}{30.0\text{ ATP/glucose}} = 2.00 \times 10^{6}\text{ glucose molecules}.

Final answer

2.00×106 glucose molecules2.00 \times 10^{6}\text{ glucose molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include explicit unit fractions (dimensional analysis) in multi-step biological calculations to ensure units cancel properly.

  • Perform a magnitude check by asking whether the quantity of energy carriers (ATP) should be greater or smaller than the number of transported ions.

Lock it in

Similar question

01

A renal epithelial cell imports 1.20×108 K+1.20 \times 10^8\text{ K}^+ ions across its basolateral membrane via Na+/K+\text{Na}^+/\text{K}^+-ATPase pumps. How many ATP molecules are hydrolyzed, and how many glucose molecules must be oxidized if each yields 30.0 ATP30.0\text{ ATP}?

Answer

ATP=1.20×108 K+2 K+/ATP=6.00×107 ATP\text{ATP} = \frac{1.20 \times 10^8\text{ K}^+}{2\text{ K}^+/\text{ATP}} = 6.00 \times 10^7\text{ ATP}. Glucose required =6.00×10730.0=2.00×106 glucose molecules= \frac{6.00 \times 10^7}{30.0} = 2.00 \times 10^6\text{ glucose molecules}.

02

Under hypoxic conditions, proximal tubule cells switch to anaerobic glycolysis, yielding only 2.0 ATP2.0\text{ ATP} per glucose molecule. How many glucose molecules are needed to export 1.80×108 Na+1.80 \times 10^8\text{ Na}^+ ions under these conditions?

Answer

ATP required=1.80×108 Na+3 Na+/ATP=6.00×107 ATP\text{ATP required} = \frac{1.80 \times 10^8\text{ Na}^+}{3\text{ Na}^+/\text{ATP}} = 6.00 \times 10^7\text{ ATP}. Glucose required =6.00×1072.0=3.00×107 glucose molecules= \frac{6.00 \times 10^7}{2.0} = 3.00 \times 10^7\text{ glucose molecules}.

03

An active transport inhibitor decreases the efficiency of the pump such that only 2 Na+2\text{ Na}^+ ions are exported per ATP instead of 33. To export the same 1.80×108 Na+1.80 \times 10^8\text{ Na}^+ ions aerobically (30.0 ATP/glucose30.0\text{ ATP/glucose}), calculate the percentage increase in glucose consumption compared to normal conditions.

Answer

Normal glucose =1.80×108/330.0=2.00×106= \frac{1.80 \times 10^8 / 3}{30.0} = 2.00 \times 10^6. Altered glucose =1.80×108/230.0=3.00×106= \frac{1.80 \times 10^8 / 2}{30.0} = 3.00 \times 10^6. Percentage increase =3.00×106−2.00×1062.00×106×100%=50.0%= \frac{3.00 \times 10^6 - 2.00 \times 10^6}{2.00 \times 10^6} \times 100\% = 50.0\%.

Loading workspace…