Resources

A positive-sense single-stranded RNA ((+)ssRNA(+)\text{ssRNA}) virus enters a eukaryotic host cell. The viral genome consists of 9.60×103 nucleotides9.60 \times 10^3\text{ nucleotides} containing an open reading frame that encodes a large polyprotein precursor of 3.00×103 amino acids3.00 \times 10^3\text{ amino acids}. Host ribosomes translate this viral mRNA at an average elongation rate of 5.0 amino acids/second5.0\text{ amino acids/second}. Simultaneously, the viral RNA-dependent RNA polymerase (RdRp) transcribes a negative-sense template strand at 40 nucleotides/second40\text{ nucleotides/second}. Calculate the absolute difference in time (in seconds) required for host ribosomes to complete the translation of one full-length polyprotein compared to the time required for a single RdRp to transcribe one complete negative-sense complementary antigenomic strand.

Answer and steps

Final answer

360 s360\text{ s}

Steps

01

Calculate the time required for translation

To find the difference in time between translation and complementary strand transcription, we calculate the time required for each biological process separately.

Translation synthesizes a polyprotein by linking amino acids together using host ribosomes:

  • Length of the polyprotein: Naa=3.00×103 amino acidsN_{\text{aa}} = 3.00 \times 10^3\text{ amino acids}
  • Translation rate: vtrans=5.0 amino acids/sv_{\text{trans}} = 5.0\text{ amino acids/s}

The time required to translate one full-length polyprotein (ttranst_{\text{trans}}) is:

ttrans=Naavtrans=3.00×103 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{N_{\text{aa}}}{v_{\text{trans}}} = \frac{3.00 \times 10^3\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}

02

Calculate the time required for negative-strand RNA synthesis

The viral RNA-dependent RNA polymerase (RdRp) uses the entire positive-sense genome as a template to transcribe a full-length, complementary negative-sense antigenomic strand:

  • Length of the complete viral RNA template: Nnt=9.60×103 nucleotidesN_{\text{nt}} = 9.60 \times 10^3\text{ nucleotides}
  • Transcription elongation rate: vrep=40 nucleotides/sv_{\text{rep}} = 40\text{ nucleotides/s}

The time required to synthesize one complete negative-sense strand (trept_{\text{rep}}) is:

trep=Nntvrep=9.60×103 nucleotides40 nucleotides/s=240 st_{\text{rep}} = \frac{N_{\text{nt}}}{v_{\text{rep}}} = \frac{9.60 \times 10^3\text{ nucleotides}}{40\text{ nucleotides/s}} = 240\text{ s}

03

Determine the absolute difference in time

Subtract the time taken for RNA replication from the time taken for protein translation:

Δt=∣ttrans−trep∣=∣600 s−240 s∣=360 s\Delta t = |t_{\text{trans}} - t_{\text{rep}}| = |600\text{ s} - 240\text{ s}| = 360\text{ s}

(Common Pitfall: Do not confuse the total nucleotide length of the viral genome with the length of the translated open reading frame. Translation rate is given in amino acids per second for the polyprotein length, while RdRp copies the entire viral RNA nucleotide sequence.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student incorrectly multiplies the amino acid elongation rate by 3 nucleotides per codon instead of dividing the coding length, or misapplies the codon conversion factor by dividing the number of amino acids by 3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ttranscription=9600 nt/40 nt/s=240 st_{\text{transcription}} = 9600\text{ nt} / 40\text{ nt/s} = 240\text{ s}

  2. Step 2

    ttranslation=(3000/3)/5.0=1000/5.0=200 st_{\text{translation}} = (3000 / 3) / 5.0 = 1000 / 5.0 = 200\text{ s}

    Correct

    ttrans=3.00×103 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{3.00 \times 10^3\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}

    The polyprotein size was already specified as 3.00×103 amino acids3.00 \times 10^3\text{ amino acids}, and the ribosome speed was given as 5.0 amino acids/s5.0\text{ amino acids/s}. Dividing by 3 was unnecessary and converted your amino acid count incorrectly.

  3. Step 3

    Δt=∣200 s−240 s∣=40 s\Delta t = |200\text{ s} - 240\text{ s}| = 40\text{ s}

    Correct

    Δt=∣600 s−240 s∣=360 s\Delta t = |600\text{ s} - 240\text{ s}| = 360\text{ s}

    You correctly took the absolute difference between your two calculated durations, but the result was affected by the error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the full genome length and elongation speed to calculate the negative-strand transcription time.

You used the absolute value difference formulation required by the question.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Superfluous unit conversion

You divided the amino acid count by 3, confusing amino acids with nucleotides.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reflexively applied the codon ratio (3 nucleotides per amino acid3\text{ nucleotides per amino acid}) to a quantity that was already expressed in amino acids, rather than tracking whether the given value was a nucleotide length or an amino acid length.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check matching units before calculating rate
  • Time equals quantity divided by rate: t=QuantityRatet = \frac{\text{Quantity}}{\text{Rate}}, where both numerator and denominator must share the same biological unit.

  • Always verify whether the given length is in nucleotides or amino acids before applying a factor of 3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ttrans=3000 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{3000\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}

  2. Δt=∣600 s−240 s∣=360 s\Delta t = |600\text{ s} - 240\text{ s}| = 360\text{ s}

Final answer

360 s360\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate given values with explicit units (e.g., nt vs. aa) during reading.

  • Only apply the codon conversion factor (3 nt=1 aa3\text{ nt} = 1\text{ aa}) when converting between nucleotides and amino acids.

OverviewACEpath Teacher's Diagnosis

02 The student uses the total genome length of 9600 nucleotides instead of the 3000 amino acids when calculating translation time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ttranscription=960040=240 st_{\text{transcription}} = \frac{9600}{40} = 240\text{ s}

  2. Step 2

    ttranslation=96005.0=1920 st_{\text{translation}} = \frac{9600}{5.0} = 1920\text{ s}

    Correct

    ttrans=3.00×103 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{3.00 \times 10^3\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}

    You divided the total genome length (9600 nucleotides9600\text{ nucleotides}) by the translation rate (5.0 amino acids/s5.0\text{ amino acids/s}), which mismatches units. Because the elongation rate is given in amino acids per second, you should divide the polyprotein length (3000 amino acids3000\text{ amino acids}) by 5.0 amino acids/s5.0\text{ amino acids/s}.

  3. Step 3

    Δt=∣1920 s−240 s∣=1680 s\Delta t = |1920\text{ s} - 240\text{ s}| = 1680\text{ s}

    Correct

    Δt=∣600 s−240 s∣=360 s\Delta t = |600\text{ s} - 240\text{ s}| = 360\text{ s}

    Your subtraction step correctly followed the difference formula, but the result was affected by the incorrect translation time from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the time needed for negative-sense strand synthesis by dividing the full genome length by the RdRp elongation rate.

You set up the absolute difference correctly by taking the magnitude of the difference between the two durations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch / Wrong Quantity in Translation Calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the total viral nucleotide length (9600 nucleotides9600\text{ nucleotides}) into the translation formula instead of the polyprotein chain length (3000 amino acids3000\text{ amino acids}), creating a dimensional mismatch between nucleotides and amino acids per second.

REASONING PATH
Your ACEpath teacher’s suggested approach
Align Units Between Polymer and Rate
  • Time=Number of units in polymerElongation rate in units per second\text{Time} = \frac{\text{Number of units in polymer}}{\text{Elongation rate in units per second}}

  • Always verify that the numerator units match the rate denominator units (e.g., amino acids with amino acids/second, and nucleotides with nucleotides/second).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the length of the translated product: Naa=3.00×103 amino acidsN_{\text{aa}} = 3.00 \times 10^3\text{ amino acids}.

  2. Calculate the translation time: ttrans=3.00×103 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{3.00 \times 10^3\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}.

  3. Subtract the replication time from the translation time: Δt=∣600 s−240 s∣=360 s\Delta t = |600\text{ s} - 240\text{ s}| = 360\text{ s}.

Final answer

360 s360\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating elongation time, check whether the polymer being synthesized is RNA (measured in nucleotides) or protein (measured in amino acids).

  • Make sure the units of the molecule length match the rate units (nucleotides vs. amino acids) before dividing.

OverviewACEpath Teacher's Diagnosis

03 The student converts the polyprotein into nucleotides by multiplying by 3, but fails to use the nucleotide transcription rate, instead using the amino acid rate or multiplying the times directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Coding nucleotides=3000×3=9000 nt  ⟹  ttranslation=9000/5.0=1800 s\text{Coding nucleotides} = 3000 \times 3 = 9000\text{ nt} \implies t_{\text{translation}} = 9000 / 5.0 = 1800\text{ s}

    Correct

    ttrans=3.00×103 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{3.00 \times 10^3\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}

    You converted the amino acid length to nucleotides (9000 nt9000\text{ nt}), but the elongation rate was already specified in amino acids per second (5.0 amino acids/s5.0\text{ amino acids/s}). Dividing nucleotides by amino acids per second creates a unit mismatch. Either divide 3000 amino acids3000\text{ amino acids} directly by 5.0 amino acids/s5.0\text{ amino acids/s} to get 600 s600\text{ s}, or convert the rate to 15 nt/s15\text{ nt/s} before dividing.

  2. Step 2

    ttranscription=9600/40=240 st_{\text{transcription}} = 9600 / 40 = 240\text{ s}

  3. Step 3

    Δt=∣1800 s−240 s∣=1560 s\Delta t = |1800\text{ s} - 240\text{ s}| = 1560\text{ s}

    Correct

    Δt=∣600 s−240 s∣=360 s\Delta t = |600\text{ s} - 240\text{ s}| = 360\text{ s}

    Your subtraction method is correct, but your final answer is affected by the incorrect translation time from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the full genome length and RdRp elongation rate to find the transcription time.

You correctly recognized that each amino acid corresponds to a three-nucleotide codon.

You set up the absolute difference formula between the two biological processes properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Inconsistency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You converted the polyprotein length into nucleotides but forgot to convert the translation elongation rate into nucleotides per second, dividing units of nucleotides by units of amino acids per second.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Units in Rate Calculations
  • Time=QuantityRate\text{Time} = \frac{\text{Quantity}}{\text{Rate}}, where the unit of quantity must match the numerator of the rate.

  • Check the given rate units first: if the rate is in amino acids/s\text{amino acids/s}, keep the sequence length in amino acids.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate translation time using matching units: ttrans=3.00×103 amino acids5.0 amino acids/s=600 st_{\text{trans}} = \frac{3.00 \times 10^3\text{ amino acids}}{5.0\text{ amino acids/s}} = 600\text{ s}.

  2. Keep your correct transcription time: trep=9.60×103 nucleotides40 nucleotides/s=240 st_{\text{rep}} = \frac{9.60 \times 10^3\text{ nucleotides}}{40\text{ nucleotides/s}} = 240\text{ s}.

  3. Find the absolute difference: Δt=∣600 s−240 s∣=360 s\Delta t = |600\text{ s} - 240\text{ s}| = 360\text{ s}.

Final answer

360 s360\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up fractions, explicitly write down the measurement unit for both the numerator and the denominator.

  • Practice tracking unit cancellations when converting between codons, nucleotides, and amino acid residues.

Lock it in

Similar question

01

A viral mRNA open reading frame consists of 2400 nucleotides2400\text{ nucleotides}. Host ribosomes translate it at an average rate of 4.0 amino acids/second4.0\text{ amino acids/second}. Calculate the time in seconds required to synthesize the full protein.

Answer

First convert nucleotides to amino acids: Naa=2400/3=800 aaN_{\text{aa}} = 2400 / 3 = 800\text{ aa}. Then divide by translation speed: t=800 aa/4.0 aa/s=200 st = 800\text{ aa} / 4.0\text{ aa/s} = 200\text{ s}.

02

A coronavirus genomic RNA contains 30,000 nucleotides30{,}000\text{ nucleotides}. Its replication complex synthesizes full-length negative-sense RNA at 150 nt/s150\text{ nt/s}. An open reading frame encoding a structural protein has 1200 amino acids1200\text{ amino acids} and is translated at 6.0 amino acids/s6.0\text{ amino acids/s}. Which process finishes faster, and by how many seconds?

Answer

Replication time: trep=30,000/150=200 st_{\text{rep}} = 30{,}000 / 150 = 200\text{ s}. Translation time: ttrans=1200/6.0=200 st_{\text{trans}} = 1200 / 6.0 = 200\text{ s}. Both processes finish in the exact same time (0 s0\text{ s} difference).

03

A (+)ssRNA(+)\text{ssRNA} viral genome of 10,500 nucleotides10{,}500\text{ nucleotides} encodes two independent polyproteins: Polyprotein A (1800 amino acids1800\text{ amino acids}) and Polyprotein B (900 amino acids900\text{ amino acids}). Both are translated sequentially by ribosomes at 4.5 amino acids/s4.5\text{ amino acids/s}. Meanwhile, RdRp copies the entire genome at 35 nt/s35\text{ nt/s}. Find the absolute difference in time between total sequential polyprotein translation and one round of full genome transcription.

Answer

Total translation length: 1800+900=2700 aa1800 + 900 = 2700\text{ aa}. Sequential translation time: ttrans=2700/4.5=600 st_{\text{trans}} = 2700 / 4.5 = 600\text{ s}. Transcription time: ttranscription=10,500/35=300 st_{\text{transcription}} = 10{,}500 / 35 = 300\text{ s}. Absolute difference: ∣600 s−300 s∣=300 s|600\text{ s} - 300\text{ s}| = 300\text{ s}.

Loading workspace…