Resources

A coal-fired power station emits sulfur dioxide (SO2\text{SO}_2), which hydrolyzes and oxidizes in atmospheric moisture to form sulfuric acid (H2SO4\text{H}_2\text{SO}_4). An environmental monitoring station downwind collects precipitation from a storm event over an unbuffered, granitic catchment pond with a fixed volume of 2.50×105 m32.50 \times 10^5\text{ m}^3. The storm deposits a total volume of 5.00×104 m35.00 \times 10^4\text{ m}^3 of acid rain with a measured pH\text{pH} of 3.703.70. Prior to the storm, the pond had a neutral pH\text{pH} of 7.007.00 and zero buffering capacity. Assuming the strong diprotic acid completely dissociates into hydronium ions (H3O+\text{H}_3\text{O}^+) and complete mixing occurs without neutralizing geological weathering, calculate the final equilibrium pH\text{pH} of the pond immediately after the precipitation event.

Answer and steps

Final answer

pH=4.48\text{pH} = 4.48

Steps

01

Calculate the hydronium ion concentration of both bodies of water

To find the final pH\text{pH} of the pond after the acid rain event, we calculate the total amount of hydronium ions (HX3OX+\ce{H_3O^+}) added to the system and divide by the final total volume.

Recall the definition of pH\text{pH}: pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H_3O^+}] [HX3OX+]=10−pH[\ce{H_3O^+}] = 10^{-\text{pH}}

  1. Catchment pond before the storm: [HX3OX+]pond=10−7.00 M=1.00×10−7 mol/L[\ce{H_3O^+}]_{\text{pond}} = 10^{-7.00}\text{ M} = 1.00 \times 10^{-7}\text{ mol/L}
  2. Acid rain precipitation: [HX3OX+]rain=10−3.70 M≈1.995×10−4 mol/L[\ce{H_3O^+}]_{\text{rain}} = 10^{-3.70}\text{ M} \approx 1.995 \times 10^{-4}\text{ mol/L}

02

Determine the total volume after mixing

Assuming additive volumes, the total combined volume VtotalV_{\text{total}} is: Vtotal=Vpond+VrainV_{\text{total}} = V_{\text{pond}} + V_{\text{rain}} Vtotal=2.50×105 m3+5.00×104 m3=3.00×105 m3V_{\text{total}} = 2.50 \times 10^5\text{ m}^3 + 5.00 \times 10^4\text{ m}^3 = 3.00 \times 10^5\text{ m}^3

Since 1 m3=1000 L1\text{ m}^3 = 1000\text{ L}, the volume ratio is identical whether measured in liters or cubic meters: Vtotal=3.00×108 LV_{\text{total}} = 3.00 \times 10^8\text{ L}


03

Calculate the total moles of HX3OX+\ce{H_3O^+}

Multiply each concentration by its respective volume:

  • From the pond: npond=[HX3OX+]pond⋅Vpond=(1.00×10−7 mol/L)⋅(2.50×108 L)=25.0 moln_{\text{pond}} = [\ce{H_3O^+}]_{\text{pond}} \cdot V_{\text{pond}} = (1.00 \times 10^{-7}\text{ mol/L}) \cdot (2.50 \times 10^8\text{ L}) = 25.0\text{ mol}
  • From the acid rain: nrain=[HX3OX+]rain⋅Vrain=(1.995×10−4 mol/L)⋅(5.00×107 L)≈9976.3 moln_{\text{rain}} = [\ce{H_3O^+}]_{\text{rain}} \cdot V_{\text{rain}} = (1.995 \times 10^{-4}\text{ mol/L}) \cdot (5.00 \times 10^7\text{ L}) \approx 9976.3\text{ mol}

Total moles of HX3OX+\ce{H_3O^+} present: ntotal=npond+nrain=25.0 mol+9976.3 mol=10001.3 moln_{\text{total}} = n_{\text{pond}} + n_{\text{rain}} = 25.0\text{ mol} + 9976.3\text{ mol} = 10001.3\text{ mol}

(Pitfall note: Do not average pH\text{pH} values directly. Because pH\text{pH} is a logarithmic scale, an arithmetic average of pH\text{pH} values is mathematically incorrect; you must sum the actual ion amounts.)


04

Calculate the final concentration and equilibrium pH\text{pH}

Divide the total moles by the final volume: [HX3OX+]final=ntotalVtotal=10001.3 mol3.00×108 L≈3.334×10−5 mol/L[\ce{H_3O^+}]_{\text{final}} = \frac{n_{\text{total}}}{V_{\text{total}}} = \frac{10001.3\text{ mol}}{3.00 \times 10^8\text{ L}} \approx 3.334 \times 10^{-5}\text{ mol/L}

Now calculate the final pH\text{pH}: pHfinal=−log⁡10(3.334×10−5)≈4.48\text{pH}_{\text{final}} = -\log_{10}\left(3.334 \times 10^{-5}\right) \approx 4.48

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student averages pH values directly instead of converting pH to hydronium ion concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Vrain=5.00×104 m3V_{\text{rain}} = 5.00 \times 10^4\text{ m}^3 Vpond=2.50×105 m3V_{\text{pond}} = 2.50 \times 10^5\text{ m}^3

  2. Step 2

    pHfinal=3.70×5.00×104+7.00×2.50×1053.00×105  ⟹  pHfinal=185000+1750000300000\text{pH}_{\text{final}} = \frac{3.70 \times 5.00 \times 10^4 + 7.00 \times 2.50 \times 10^5}{3.00 \times 10^5} \implies \text{pH}_{\text{final}} = \frac{185000 + 1750000}{300000}

    Correct

    [HX3OX+]rain=10−3.70≈1.995×10−4 M[\ce{H3O+}]_{\text{rain}} = 10^{-3.70} \approx 1.995 \times 10^{-4}\text{ M}, [HX3OX+]pond=10−7.00=1.00×10−7 M  ⟹  [HX3OX+]final=(1.995×10−4)(5.00×104)+(1.00×10−7)(2.50×105)3.00×105≈3.33×10−5 M[\ce{H3O+}]_{\text{pond}} = 10^{-7.00} = 1.00 \times 10^{-7}\text{ M} \implies [\ce{H3O+}]_{\text{final}} = \frac{(1.995 \times 10^{-4})(5.00 \times 10^4) + (1.00 \times 10^{-7})(2.50 \times 10^5)}{3.00 \times 10^5} \approx 3.33 \times 10^{-5}\text{ M}

    You treated pH\text{pH} as an intensive linear quantity and averaged it directly. Because pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H3O+}], you must first convert each pH\text{pH} value to [HX3OX+]=10−pH[\ce{H3O+}] = 10^{-\text{pH}} before mixing.

  3. Step 3

    pHfinal=6.45\text{pH}_{\text{final}} = 6.45

    Correct

    pHfinal=−log⁡10(3.334×10−5)≈4.48\text{pH}_{\text{final}} = -\log_{10}(3.334 \times 10^{-5}) \approx 4.48

    Your arithmetic evaluating the weighted average was accurate, but the result is incorrect due to averaging pH\text{pH} values directly in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recorded the volumes of the acid rain and catchment pond.

You correctly computed the total volume as 3.00×105 m33.00 \times 10^5\text{ m}^3.

You accurately completed the arithmetic for your chosen weighted formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear averaging of logarithmic scale

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated pH\text{pH} as an additive, linear quantity rather than a base-10 logarithmic scale. Mixing acidic and neutral solutions requires calculating total moles of HX3OX+\ce{H3O+} ions and dividing by the total combined volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logarithmic nature of pH
  • pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H3O+}], meaning each unit decrease in pH\text{pH} represents a 1010-fold increase in [HX3OX+][\ce{H3O+}].

  • Never calculate an arithmetic average of pH\text{pH} values. Always convert pH\text{pH} to [HX3OX+][\ce{H3O+}] via [HX3OX+]=10−pH[\ce{H3O+}] = 10^{-\text{pH}} first.

Conservation of moles upon dilution
  • ntotal=[HX3OX+]1V1+[HX3OX+]2V2n_{\text{total}} = [\ce{H3O+}]_1 V_1 + [\ce{H3O+}]_2 V_2 and [HX3OX+]final=ntotalV1+V2[\ce{H3O+}]_{\text{final}} = \frac{n_{\text{total}}}{V_1 + V_2}.

  • Sum the amounts of hydronium ions, find the combined molarity, and compute pHfinal=−log⁡10[HX3OX+]final\text{pH}_{\text{final}} = -\log_{10}[\ce{H3O+}]_{\text{final}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert each pH\text{pH} to hydronium ion concentration: [HX3OX+]rain=10−3.70≈1.995×10−4 mol/L[\ce{H3O+}]_{\text{rain}} = 10^{-3.70} \approx 1.995 \times 10^{-4}\text{ mol/L} and [HX3OX+]pond=10−7.00=1.00×10−7 mol/L[\ce{H3O+}]_{\text{pond}} = 10^{-7.00} = 1.00 \times 10^{-7}\text{ mol/L}.

  2. Calculate total hydronium ions: ntotal=(1.995×10−4)(5.00×107 L)+(1.00×10−7)(2.50×108 L)≈9976.3+25.0=10001.3 moln_{\text{total}} = (1.995 \times 10^{-4})(5.00 \times 10^7\text{ L}) + (1.00 \times 10^{-7})(2.50 \times 10^8\text{ L}) \approx 9976.3 + 25.0 = 10001.3\text{ mol}.

  3. Find the final hydronium concentration: [HX3OX+]final=10001.3 mol3.00×108 L≈3.334×10−5 mol/L[\ce{H3O+}]_{\text{final}} = \frac{10001.3\text{ mol}}{3.00 \times 10^8\text{ L}} \approx 3.334 \times 10^{-5}\text{ mol/L}.

  4. Compute the final pH\text{pH}: pHfinal=−log⁡10(3.334×10−5)≈4.48\text{pH}_{\text{final}} = -\log_{10}(3.334 \times 10^{-5}) \approx 4.48.

Final answer

pH=4.48\text{pH} = 4.48

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting pH\text{pH} to [HX3OX+][\ce{H3O+}] and [HX3OX+][\ce{H3O+}] back to pH\text{pH}.

  • Remember that because pH\text{pH} is logarithmic, adding even a moderate volume of a strong acid drastically lowers the pH\text{pH} of an unbuffered neutral solution far more than a linear average predicts.

OverviewACEpath Teacher's Diagnosis

02 The student divides the added moles of hydronium by only the initial pond volume rather than the combined total volume after rainfall.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [HX3OX+]rain=10−3.70=2.00×10−4 mol/L  ⟹  moles HX3OX+=(2.00×10−4 mol/L)×(5.00×107 L)=1.00×104 mol[\ce{H3O+}]_{\text{rain}} = 10^{-3.70} = 2.00 \times 10^{-4}\text{ mol/L} \implies \text{moles }\ce{H3O+} = (2.00 \times 10^{-4}\text{ mol/L}) \times (5.00 \times 10^7\text{ L}) = 1.00 \times 10^4\text{ mol}

  2. Step 2

    [HX3OX+]final=1.00×104 mol/(2.50×108 L)=4.00×10−5 mol/L[\ce{H3O+}]_{\text{final}} = 1.00 \times 10^4\text{ mol} / (2.50 \times 10^8\text{ L}) = 4.00 \times 10^{-5}\text{ mol/L}

    Correct

    Vtotal=2.50×108 L+5.00×107 L=3.00×108 L  ⟹  [HX3OX+]final=1.00×104 mol3.00×108 L≈3.33×10−5 MV_{\text{total}} = 2.50 \times 10^8\text{ L} + 5.00 \times 10^7\text{ L} = 3.00 \times 10^8\text{ L} \implies [\ce{H3O+}]_{\text{final}} = \frac{1.00 \times 10^4\text{ mol}}{3.00 \times 10^8\text{ L}} \approx 3.33 \times 10^{-5}\text{ M}

    You used only the initial pond volume (2.50×108 L2.50 \times 10^8\text{ L}) as the denominator. Because the storm deposited an additional 5.00×107 L5.00 \times 10^7\text{ L} of water, the final concentration must be calculated using the combined volume Vtotal=3.00×108 LV_{\text{total}} = 3.00 \times 10^8\text{ L}.

  3. Step 3

    pH=−log⁡10(4.00×10−5)=4.40\text{pH} = -\log_{10}(4.00 \times 10^{-5}) = 4.40

    Correct

    pH=−log⁡10(3.33×10−5)≈4.48\text{pH} = -\log_{10}(3.33 \times 10^{-5}) \approx 4.48

    Your pH\text{pH} calculation correctly applied the negative logarithm formula, but the result was shifted because it was evaluated on the unadjusted hydronium concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the hydronium ion concentration from the precipitation pH\text{pH} using [HX3OX+]=10−pH[\ce{H3O+}] = 10^{-\text{pH}}.

You accurately converted cubic meters to liters and determined the total moles of hydronium delivered by the precipitation event.

You correctly applied the definition pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H3O+}] in your final step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of added volume in dilution/mixing

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the dilution as occurring within a constant reservoir volume rather than an open system where the added precipitation increases the total liquid volume of the catchment pond.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservation of Total Volume
  • When two liquid bodies mix, the final volume is the sum of both individual volumes: Vtotal=V1+V2V_{\text{total}} = V_1 + V_2.

  • Always write out Vtotal=Vinitial+VaddedV_{\text{total}} = V_{\text{initial}} + V_{\text{added}} before calculating the final concentration after a mixing event.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the total volume after rainfall: Vtotal=Vpond+Vrain=2.50×108 L+0.50×108 L=3.00×108 LV_{\text{total}} = V_{\text{pond}} + V_{\text{rain}} = 2.50 \times 10^8\text{ L} + 0.50 \times 10^8\text{ L} = 3.00 \times 10^8\text{ L}.

  2. Divide total moles of HX3OX+\ce{H3O+} by VtotalV_{\text{total}}: [HX3OX+]final=1.00×104 mol3.00×108 L≈3.334×10−5 mol/L[\ce{H3O+}]_{\text{final}} = \frac{1.00 \times 10^4\text{ mol}}{3.00 \times 10^8\text{ L}} \approx 3.334 \times 10^{-5}\text{ mol/L}.

  3. Calculate the final pH\text{pH}: pH=−log⁡10(3.334×10−5)≈4.48\text{pH} = -\log_{10}(3.334 \times 10^{-5}) \approx 4.48.

Final answer

pH=4.48\text{pH} = 4.48

NEXT STEPS
Final Takeaways from Your Teacher
  • Sum all component volumes to determine VtotalV_{\text{total}} whenever adding liquid solutions before computing concentration.

  • Practice combining dilution and logarithmic pH\text{pH} calculations to reinforce multi-step environmental mixing problems.

OverviewACEpath Teacher's Diagnosis

03 The student unnecessarily doubles the hydronium ion concentration because sulfuric acid is diprotic, failing to realize the measured pH already reflects the free hydronium ion concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [HX3OX+]rain=2×10−3.70=2×(2.00×10−4)=4.00×10−4 mol/L[\ce{H_3O^+}]_{\text{rain}} = 2 \times 10^{-3.70} = 2 \times (2.00 \times 10^{-4}) = 4.00 \times 10^{-4}\text{ mol/L}

    Correct

    [HX3OX+]rain=10−pH=10−3.70≈2.00×10−4 mol/L[\ce{H_3O^+}]_{\text{rain}} = 10^{-\text{pH}} = 10^{-3.70} \approx 2.00 \times 10^{-4}\text{ mol/L}

    You multiplied by a factor of 2 because sulfuric acid is diprotic. However, a measured pH\text{pH} already reflects the concentration of free hydronium ions in solution ([HX3OX+]=10−pH[\ce{H_3O^+}] = 10^{-\text{pH}}), so no stoichiometric doubling is needed.

  2. Step 2

    moles HX3OX+=(4.00×10−4 mol/L)×(5.00×107 L)=2.00×104 mol\text{moles }\ce{H_3O^+} = (4.00 \times 10^{-4}\text{ mol/L}) \times (5.00 \times 10^7\text{ L}) = 2.00 \times 10^4\text{ mol}

    Correct

    nHX3OX+,rain=(2.00×10−4 mol/L)×(5.00×107 L)≈9.98×103 moln_{\ce{H_3O^+},\text{rain}} = (2.00 \times 10^{-4}\text{ mol/L}) \times (5.00 \times 10^7\text{ L}) \approx 9.98 \times 10^3\text{ mol}

    You multiplied your hydronium concentration by the volume correctly, but the result was affected by the doubled concentration in Step 1.

  3. Step 3

    Vtotal=2.50×108 L+5.00×107 L=3.00×108 LV_{\text{total}} = 2.50 \times 10^8\text{ L} + 5.00 \times 10^7\text{ L} = 3.00 \times 10^8\text{ L}

  4. Step 4

    [HX3OX+]final=2.00×104 mol3.00×108 L=6.67×10−5 mol/L[\ce{H_3O^+}]_{\text{final}} = \frac{2.00 \times 10^4\text{ mol}}{3.00 \times 10^8\text{ L}} = 6.67 \times 10^{-5}\text{ mol/L}

    Correct

    [HX3OX+]final=9.98×103 mol+25 mol3.00×108 L≈3.33×10−5 mol/L[\ce{H_3O^+}]_{\text{final}} = \frac{9.98 \times 10^3\text{ mol} + 25\text{ mol}}{3.00 \times 10^8\text{ L}} \approx 3.33 \times 10^{-5}\text{ mol/L}

    You set up the dilution ratio correctly, but the resulting concentration carries over the doubled mole count from Step 1.

  5. Step 5

    pH=−log⁡10(6.67×10−5)=4.18\text{pH} = -\log_{10}(6.67 \times 10^{-5}) = 4.18

    Correct

    pH=−log⁡10(3.33×10−5)≈4.48\text{pH} = -\log_{10}(3.33 \times 10^{-5}) \approx 4.48

    You correctly evaluated the negative base-10 logarithm, but your final answer is lower than expected due to the earlier factor of 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted all solution volumes from cubic meters into liters.

You applied the additive volume rule correctly to determine the combined volume of the catchment pond.

You used the correct relation between hydronium concentration and logarithmic pH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unnecessary stoichiometric multiplier on measured pH

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated analytical acid concentration (which requires stoichiometric factors for polyprotic species like HX2SOX4\ce{H_2SO_4}) with measured pH\text{pH}. A measured pH\text{pH} reading already quantifies the equilibrium concentration of free hydronium ions ([HX3OX+]=10−pH[\ce{H_3O^+}] = 10^{-\text{pH}}), so applying a diprotic multiplier of 2 artificially doubles the proton count.

REASONING PATH
Your ACEpath teacher’s suggested approach
Measured pH vs. Acid Stoichiometry
  • By operational definition, pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H_3O^+}], which means [HX3OX+]=10−pH[\ce{H_3O^+}] = 10^{-\text{pH}}.

  • Whenever an aqueous sample has a measured pH\text{pH}, convert it directly to hydronium concentration using [HX3OX+]=10−pH[\ce{H_3O^+}] = 10^{-\text{pH}} without multiplying by acid proticity.

When to Use the Diprotic Factor
  • Only multiply by 2 if you are given the formal concentration of the diprotic acid itself (e.g., CHX2SOX4=0.05 M  ⟹  [HX3OX+]=2×0.05 MC_{\ce{H2SO4}} = 0.05\text{ M} \implies [\ce{H_3O^+}] = 2 \times 0.05\text{ M}).

  • Check the given quantity: if it is a chemical formula concentration, apply stoichiometric dissociation; if it is a pH value, read the hydronium ion concentration directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the measured pH\text{pH} to find the true hydronium concentration: [HX3OX+]rain=10−3.70≈1.995×10−4 mol/L[\ce{H_3O^+}]_{\text{rain}} = 10^{-3.70} \approx 1.995 \times 10^{-4}\text{ mol/L}.

  2. Calculate moles of HX3OX+\ce{H_3O^+} introduced by the rain: nrain=(1.995×10−4 mol/L)×(5.00×107 L)≈9.976×103 moln_{\text{rain}} = (1.995 \times 10^{-4}\text{ mol/L}) \times (5.00 \times 10^7\text{ L}) \approx 9.976 \times 10^3\text{ mol}.

  3. Account for the pond hydronium content (optional but rigorous): npond=10−7.00 M×2.50×108 L=25.0 moln_{\text{pond}} = 10^{-7.00}\text{ M} \times 2.50 \times 10^8\text{ L} = 25.0\text{ mol}, giving ntotal≈1.000×104 moln_{\text{total}} \approx 1.000 \times 10^4\text{ mol}.

  4. Divide by the combined volume: [HX3OX+]final=1.000×104 mol3.00×108 L≈3.334×10−5 mol/L[\ce{H_3O^+}]_{\text{final}} = \frac{1.000 \times 10^4\text{ mol}}{3.00 \times 10^8\text{ L}} \approx 3.334 \times 10^{-5}\text{ mol/L}.

  5. Compute the final equilibrium pH\text{pH}: pH=−log⁡10(3.334×10−5)≈4.48\text{pH} = -\log_{10}(3.334 \times 10^{-5}) \approx 4.48.

Final answer

pH=4.48\text{pH} = 4.48

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between analytical acid concentration [HA][\ce{HA}] and equilibrium free ion concentration [HX3OX+][\ce{H_3O^+}].

  • Practice identifying whether a problem provides a chemical recipe concentration or an empirical electrochemical property (such as pH\text{pH}).

  • Complete the three targeted practice problems below to master environmental pH mixing without stoichiometric overcounting.

Lock it in

Similar question

01

A researcher mixes 1.0 L1.0\text{ L} of runoff at pH=3.00\text{pH} = 3.00 with 9.0 L9.0\text{ L} of neutral lake water at pH=7.00\text{pH} = 7.00 in an unbuffered container. Calculate the final equilibrium pH\text{pH}.

Answer

pH=4.00\text{pH} = 4.00. Moles of HX3OX+\ce{H3O+} from runoff: 1.0 L×10−3 M=1.0×10−3 mol1.0\text{ L} \times 10^{-3}\text{ M} = 1.0 \times 10^{-3}\text{ mol}. Moles from lake: 9.0 L×10−7 M=9.0×10−7 mol9.0\text{ L} \times 10^{-7}\text{ M} = 9.0 \times 10^{-7}\text{ mol}. Total moles ≈1.0×10−3 mol\approx 1.0 \times 10^{-3}\text{ mol}. Total volume =10.0 L= 10.0\text{ L}. [HX3OX+]final=1.0×10−310.0=1.0×10−4 M[\ce{H3O+}]_{\text{final}} = \frac{1.0 \times 10^{-3}}{10.0} = 1.0 \times 10^{-4}\text{ M}. pH=−log⁡10(10−4)=4.00\text{pH} = -\log_{10}(10^{-4}) = 4.00.

02

An environmental chemist combines 200 mL200\text{ mL} of an industrial effluent at pH=2.00\text{pH} = 2.00 with 800 mL800\text{ mL} of river water at pH=5.00\text{pH} = 5.00 (unbuffered). Calculate the final pH\text{pH} of the mixture.

Answer

pH=2.70\text{pH} = 2.70. Hydronium from effluent: 0.200 L×10−2 M=2.00×10−3 mol0.200\text{ L} \times 10^{-2}\text{ M} = 2.00 \times 10^{-3}\text{ mol}. Hydronium from river: 0.800 L×10−5 M=8.00×10−6 mol0.800\text{ L} \times 10^{-5}\text{ M} = 8.00 \times 10^{-6}\text{ mol}. Total moles =2.008×10−3 mol= 2.008 \times 10^{-3}\text{ mol}. Total volume =1.00 L= 1.00\text{ L}. [HX3OX+]final=2.008×10−3 M[\ce{H3O+}]_{\text{final}} = 2.008 \times 10^{-3}\text{ M}. pH=−log⁡10(2.008×10−3)≈2.70\text{pH} = -\log_{10}(2.008 \times 10^{-3}) \approx 2.70.

03

A stream with a flow rate of 4.00 m3/s4.00\text{ m}^3/\text{s} at pH=6.00\text{pH} = 6.00 merges with an acid mine drainage tributary flowing at 1.00 m3/s1.00\text{ m}^3/\text{s} with pH=3.00\text{pH} = 3.00. Assuming no chemical buffering occurs, calculate the downstream equilibrium pH\text{pH}.

Answer

pH=3.70\text{pH} = 3.70. Hydronium molarities: mine drainage =1.00×10−3 M= 1.00 \times 10^{-3}\text{ M}, stream =1.00×10−6 M= 1.00 \times 10^{-6}\text{ M}. In one second, mine adds (1.00 m3)(1000 L/m3)(10−3 M)=1000 mol(1.00\text{ m}^3)(1000\text{ L/m}^3)(10^{-3}\text{ M}) = 1000\text{ mol}; stream adds (4.00 m3)(1000 L/m3)(10−6 M)=4 mol(4.00\text{ m}^3)(1000\text{ L/m}^3)(10^{-6}\text{ M}) = 4\text{ mol}. Total moles per second =1004 mol= 1004\text{ mol} across 5000 L5000\text{ L}. Downstream concentration [HX3OX+]=1004 mol5000 L=2.008×10−4 M[\ce{H3O+}] = \frac{1004\text{ mol}}{5000\text{ L}} = 2.008 \times 10^{-4}\text{ M}. Downstream pH=−log⁡10(2.008×10−4)≈3.70\text{pH} = -\log_{10}(2.008 \times 10^{-4}) \approx 3.70.

Loading workspace…