Resources

An enzyme with high catalytic efficiency exhibits an active site conformation with a rigid shape matching the transition state S‡S^{\ddagger} of its substrate. A student hypothesizes that according to the lock-and-key model, maximizing the active-site binding affinity specifically for the unreacted ground-state substrate SS will lower the overall activation energy ΔG‡\Delta G^{\ddagger} and maximize catalytic velocity. Evaluate this hypothesis conceptually and quantitatively: If an enzyme mutant binds the ground-state substrate 100100 times more tightly than the wild-type without altering its affinity for the transition state, by how much does the effective activation energy barrier ΔG‡\Delta G^{\ddagger} change at T=298 KT = 298\text{ K}, and will the catalytic rate increase or decrease? (Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})).

Answer and steps

Final answer

ΔG‡\Delta G^{\ddagger} increases by 11.4 kJ/mol11.4\text{ kJ/mol}; the catalytic rate decreases by a factor of 100100 (over-stabilization of the ES complex creates a thermodynamic pit).

Steps

01

Conceptual Evaluation: Transition-State Theory vs. Ground-State Affinity

  • Role of the Transition State: Enzymes achieve catalysis primarily by stabilizing the reaction's transition state (ESX‡\ce{ES^{\ddagger}}) relative to the ground state, thereby reducing the activation energy barrier (ΔG‡\Delta G^{\ddagger}).
  • The "Thermodynamic Pit": If an enzyme binds the ground-state substrate (S\ce{S}) excessively tightly without a corresponding stabilization of the transition state, the free energy of the enzyme-substrate complex (ES\ce{ES}) drops significantly. This creates an energetic "trough" or thermodynamic pit.
  • Consequence for Catalysis: Because the effective activation barrier for the catalytic step is the difference in free energy between the bound complex and the transition state, ΔG‡=GESX‡−GES\Delta G^{\ddagger} = G_{\ce{ES^{\ddagger}}} - G_{\ce{ES}}, lowering GESG_{\ce{ES}} while leaving GESX‡G_{\ce{ES^{\ddagger}}} unchanged increases the activation barrier. Therefore, the student's hypothesis is incorrect: maximizing affinity for the ground-state substrate impedes catalysis rather than maximizing it.

02

Quantitative Change in Activation Energy (ΔG‡\Delta G^{\ddagger})

The binding free energy change associated with increasing the ground-state binding affinity (KaK_a) by a factor of 100100 is given by:

Δ(ΔGbinding)=−RTln⁡(100)\Delta(\Delta G_{\text{binding}}) = -RT \ln(100)

Lowering the free energy of the ES\ce{ES} intermediate by this amount raises the subsequent activation barrier from ES\ce{ES} to ESX‡\ce{ES^{\ddagger}} by an equal magnitude:

Δ(ΔG‡)=RTln⁡(100)\Delta(\Delta G^{\ddagger}) = RT \ln(100)

Substitute the given values (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) and T=298 KT = 298\text{ K}):

Δ(ΔG‡)=(8.314 J/(mol⋅K))(298 K)ln⁡(100)\Delta(\Delta G^{\ddagger}) = (8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K})\ln(100)

Δ(ΔG‡)≈(2477.57 J/mol)(4.6052)≈11409.7 J/mol≈+11.4 kJ/mol\Delta(\Delta G^{\ddagger}) \approx (2477.57\text{ J/mol})(4.6052) \approx 11409.7\text{ J/mol} \approx +11.4\text{ kJ/mol}

Thus, the effective activation energy barrier ΔG‡\Delta G^{\ddagger} increases by 11.4 kJ/mol11.4\text{ kJ/mol}.


03

Impact on the Catalytic Rate (kcatk_{\text{cat}})

According to transition-state theory, the rate constant kcatk_{\text{cat}} depends exponentially on the free energy of activation:

kcat∝exp⁡(−ΔG‡RT)k_{\text{cat}} \propto \exp\left(-\frac{\Delta G^{\ddagger}}{RT}\right)

Comparing the mutant to the wild-type:

kcat, mutantkcat, WT=exp⁡(−Δ(ΔG‡)RT)=exp⁡(−ln⁡(100))=1100\frac{k_{\text{cat, mutant}}}{k_{\text{cat, WT}}} = \exp\left(-\frac{\Delta(\Delta G^{\ddagger})}{RT}\right) = \exp(-\ln(100)) = \frac{1}{100}

The catalytic rate decreases by a factor of 100100.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses ground-state stabilization with transition-state stabilization, concluding that tighter substrate binding lowers the activation energy and increases the reaction rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    The hypothesis is correct because tighter binding provides more favorable binding energy to drive the reaction. Stronger enzyme-substrate interaction lowers the activation energy barrier and speeds up catalysis.

    Correct

    The hypothesis is incorrect because preferential stabilization of the unreacted substrate (SS) lowers the free energy of the ES\ce{ES} complex without lowering GESX‡G_{\ce{ES^\ddagger}}, creating a thermodynamic pit that increases the activation barrier ΔG‡=GESX‡−GES\Delta G^\ddagger = G_{\ce{ES^\ddagger}} - G_{\ce{ES}}.

    You assumed that tighter substrate binding lowers the activation energy, but catalytic acceleration requires preferential stabilization of the transition state (S‡S^\ddagger) rather than the ground state (SS).

  2. Step 2

    ΔΔG‡=−RTln⁡(100)  ⟹  ΔΔG‡=−8.314×298×4.605 J/mol=−11.4 kJ/mol\Delta \Delta G^\ddagger = -RT\ln(100) \implies \Delta \Delta G^\ddagger = -8.314 \times 298 \times 4.605\text{ J/mol} = -11.4\text{ kJ/mol}

    Correct

    Δ(ΔG‡)=RTln⁡(100)=(8.314 J/(mol⋅K))(298 K)ln⁡(100)≈+11.4 kJ/mol\Delta(\Delta G^\ddagger) = RT\ln(100) = (8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K})\ln(100) \approx +11.4\text{ kJ/mol}

    You correctly calculated the magnitude RTln⁡(100)≈11.4 kJ/molRT\ln(100) \approx 11.4\text{ kJ/mol}, but applied a negative sign. Because binding stabilizes the ground state by −11.4 kJ/mol-11.4\text{ kJ/mol} while the transition-state energy remains unchanged, the energy difference between ES\ce{ES} and ESX‡\ce{ES^\ddagger} increases by +11.4 kJ/mol+11.4\text{ kJ/mol}.

  3. Step 3

    The effective activation barrier decreases by 11.4 kJ/mol11.4\text{ kJ/mol}, so the catalytic rate increases by 100100-fold.

    Correct

    The effective activation barrier increases by 11.4 kJ/mol11.4\text{ kJ/mol}, so the catalytic rate decreases by a factor of 100100.

    Because your activation energy change had the inverted sign, your conclusion that the rate increases by 100100-fold was reversed from the true outcome.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship ΔG=RTln⁡(K)\Delta G = RT\ln(K) to calculate the numerical magnitude of the free energy change (11.4 kJ/mol11.4\text{ kJ/mol}).

You recognized that a 100-fold affinity shift corresponds to an exponential kinetic factor of 100.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ground-state over-stabilization (thermodynamic pit)

You assigned a negative sign to Δ(ΔG‡)\Delta(\Delta G^\ddagger) instead of accounting for the increase in the barrier height from the lowered ES\ce{ES} trough.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated tighter binding of the ground-state substrate as catalytic assistance, overlooking that the catalytic barrier is defined relative to the enzyme-substrate complex (GESX‡−GESG_{\ce{ES^\ddagger}} - G_{\ce{ES}}). Stabilizing the reactant well without lowering the transition-state peak traps the substrate and slows the reaction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Point for $\Delta G^\ddagger$
  • The effective catalytic activation barrier is ΔG‡=GESX‡−GES\Delta G^\ddagger = G_{\ce{ES^\ddagger}} - G_{\ce{ES}}.

  • Always check whether an energy change alters GESG_{\ce{ES}} or GESX‡G_{\ce{ES^\ddagger}} before assigning the sign to Δ(ΔG‡)\Delta(\Delta G^\ddagger).

Pauling's Principle of Catalysis
  • Enzymes accelerate reactions by being complementary to the transition state, not the ground state.

  • Confirm that tighter binding applies specifically to the transition state S‡S^\ddagger before predicting an increase in catalytic rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of the effective activation barrier: ΔG‡=GESX‡−GES\Delta G^\ddagger = G_{\ce{ES^\ddagger}} - G_{\ce{ES}}.

  2. Note that 100100-fold tighter substrate binding lowers GESG_{\ce{ES}} by RTln⁡(100)=11.4 kJ/molRT\ln(100) = 11.4\text{ kJ/mol} while GESX‡G_{\ce{ES^\ddagger}} is unchanged.

  3. Calculate the change in activation barrier: Δ(ΔG‡)=0−(−11.4 kJ/mol)=+11.4 kJ/mol\Delta(\Delta G^\ddagger) = 0 - (-11.4\text{ kJ/mol}) = +11.4\text{ kJ/mol}.

  4. Apply transition-state theory to rate: kcat, mutantkcat, WT=exp⁡(−Δ(ΔG‡)RT)=exp⁡(−ln⁡(100))=1100\frac{k_{\text{cat, mutant}}}{k_{\text{cat, WT}}} = \exp\left(-\frac{\Delta(\Delta G^\ddagger)}{RT}\right) = \exp(-\ln(100)) = \frac{1}{100}.

Final answer

ΔG‡\Delta G^\ddagger increases by 11.4 kJ/mol11.4\text{ kJ/mol}; the catalytic rate decreases by a factor of 100100.

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a standard reaction coordinate diagram showing both wild-type and mutant profiles to visualize the thermodynamic pit.

  • Practice distinguishing between ground-state binding affinity (1/KM1/K_M) and transition-state stabilization efficiency (kcatk_{\text{cat}} or kcat/KMk_{\text{cat}}/K_M).

OverviewACEpath Teacher's Diagnosis

02 The student uses base-10 log instead of natural log when calculating the free energy change from the 100-fold affinity change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a) The hypothesis is incorrect because stabilizing the ground-state ES complex creates a thermodynamic pit, raising the activation barrier. ⟹ b) Tighter ground-state binding decreases catalytic velocity.

  2. Step 2

    \Delta$$\Delta G^{\ddagger} = RT \log(100) ⟹ \Delta$$\Delta G^{\ddagger} = 8.314 ×\times 298 ×\times 2 J/mol\text{ J/mol} = 4955 J/mol\text{ J/mol} = +4.96 kJ/mol\text{ kJ/mol}

    Correct

    Δ\Delta(Δ\Delta G^{\ddagger}) = RT \ln(100) = (8.314\text{ J/(mol}$$\cdot$$\text{K)})(298 K\text{ K}) \ln(100) ≈\approx 11410 J/mol\text{ J/mol} = +11.4 kJ/mol\text{ kJ/mol}

    Thermodynamic relationships derived from the Boltzmann distribution use the natural logarithm (ln⁡\ln), not the base-10 logarithm (log⁡10\log_{10}). Since ln⁡(100)≈4.605\ln(100) \approx 4.605 rather than 22, the barrier increases by 11.4 kJ/mol11.4\text{ kJ/mol} instead of 4.96 kJ/mol4.96\text{ kJ/mol}.

  3. Step 3

    The activation energy barrier increases by 4.96 kJ/mol4.96\text{ kJ/mol}, and the catalytic rate decreases.

    Correct

    The activation energy barrier increases by 11.4 kJ/mol11.4\text{ kJ/mol}, and the catalytic rate decreases by a factor of 100100.

    Your conclusion that the rate decreases is conceptually correct, but the numerical magnitude for the barrier change was propagated from using base-10 logarithm in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that tight ground-state binding creates a thermodynamic pit.

You correctly concluded that the student hypothesis was incorrect and that catalytic rate would decrease.

You selected the correct constants RR and TT for free energy calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm base confusion in thermodynamic equations

You evaluated log⁡(100)=2\log(100) = 2 using base 10 instead of using the natural logarithm ln⁡(100)≈4.605\ln(100) \approx 4.605.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing base-10 logarithm with natural logarithm in standard thermodynamic expressions (ΔG∘=−RTln⁡KΔ G^{\circ} = -RT \ln K). In chemistry and biochemistry thermodynamics, RTln⁡RT \ln is standard unless explicitly converted via 2.303RTlog⁡102.303 RT \log_{10}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Natural Log vs. Common Log
  • Thermodynamic free energy changes directly connect to equilibrium constants and rate changes via natural logarithm: ΔG=−RTln⁡K\Delta G = -RT \ln K.

  • Whenever you apply ΔG=−RTln⁡K\Delta G = -RT \ln K or ΔΔG‡=RTln⁡(ratio)\Delta \Delta G^{\ddagger} = RT \ln(\text{ratio}), use the natural log function (ln⁡\ln) on your calculator.

Base Conversion Check
  • If you prefer using log⁡10\log_{10}, you must multiply by the conversion factor ln⁡(10)≈2.303\ln(10) \approx 2.303: ΔG=−2.303RTlog⁡10K\Delta G = -2.303 RT \log_{10} K.

  • Always verify whether your written formula includes the 2.3032.303 factor before substituting log⁡10\log_{10} values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply natural logarithm: Δ(ΔG‡)=RTln⁡(100)\Delta(\Delta G^{\ddagger}) = RT \ln(100)

  2. Compute: Δ(ΔG‡)=(8.314 J/(mol⋅K))(298 K)×4.6052=11410 J/mol=+11.4 kJ/mol\Delta(\Delta G^{\ddagger}) = (8.314\text{ J/(mol}\cdot\text{K)})(298\text{ K}) \times 4.6052 = 11410\text{ J/mol} = +11.4\text{ kJ/mol}

  3. Relate to catalytic velocity: kcat, mutantkcat, WT=exp⁡(−Δ(ΔG‡)RT)=exp⁡(−ln⁡(100))=1100\frac{k_{\text{cat, mutant}}}{k_{\text{cat, WT}}} = \exp\left(-\frac{\Delta(\Delta G^{\ddagger})}{RT}\right) = \exp(-\ln(100)) = \frac{1}{100}

Final answer

The activation energy barrier increases by 11.4 kJ/mol11.4\text{ kJ/mol}, and the catalytic rate decreases by a factor of 100100.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing free energy differences using ΔG=−RTln⁡K\Delta G = -RT \ln K with natural logarithms.

  • Review transition-state reaction coordinate diagrams to visually track how ground-state stabilization increases ΔG‡\Delta G^{\ddagger}.

Lock it in

Similar question

01

An enzyme variant binds the transition state S‡S^\ddagger with 10001000 times higher affinity than the wild-type enzyme, with zero change in affinity for the ground-state substrate SS. At T=298 KT = 298\text{ K}, by how much does ΔG‡\Delta G^\ddagger change, and how does the catalytic rate change?

Answer

ΔG‡\Delta G^\ddagger decreases by 17.1 kJ/mol17.1\text{ kJ/mol}; the catalytic rate increases by a factor of 10001000. Lowering GESX‡G_{\ce{ES^\ddagger}} by RTln⁡(1000)=(8.314)(298)(6.908)≈17.1 kJ/molRT\ln(1000) = (8.314)(298)(6.908) \approx 17.1\text{ kJ/mol} directly reduces ΔG‡\Delta G^\ddagger by 17.1 kJ/mol17.1\text{ kJ/mol}.

02

An engineered enzyme binds both the ground-state substrate SS and the transition state S‡S^\ddagger 5050 times more tightly than the wild-type enzyme. Calculate the change in the catalytic rate constant kcatk_{\text{cat}} and the change in the apparent Michaelis constant KMK_M.

Answer

kcatk_{\text{cat}} is unchanged; KMK_M decreases by a factor of 5050. Because both GESG_{\ce{ES}} and GESX‡G_{\ce{ES^\ddagger}} decrease by the same amount (RTln⁡(50)RT\ln(50)), the barrier ΔG‡=GESX‡−GES\Delta G^\ddagger = G_{\ce{ES^\ddagger}} - G_{\ce{ES}} remains constant, leaving kcatk_{\text{cat}} unaltered while ground-state affinity increases.

03

In the design of catalytic antibodies, researchers immunize an animal against a stable transition-state analog (TSA) rather than the natural substrate molecule. Explain why this strategy produces a functional catalyst, whereas generating an antibody complementary to the substrate yields an inhibitor.

Answer

An antibody complementary to the transition state selectively lowers GESX‡G_{\ce{ES^\ddagger}}, decreasing ΔG‡\Delta G^\ddagger and accelerating the reaction. An antibody complementary to the substrate binds SS tightly, lowering GESG_{\ce{ES}} into a thermodynamic pit without stabilizing S‡S^\ddagger, which raises the barrier and acts as a competitive inhibitor.

Loading workspace…