Resources

In a wetland plant species, tolerance to heavy-metal soil toxicity is controlled by allele TT (dominant, conferring tolerance) versus tt (recessive, non-tolerant). At the same time, flower color is controlled by an independently assorting locus with alleles RR (red) and rr (white, recessive). In a baseline population of 1,0001{,}000 plants, both loci are in Hardy-Weinberg equilibrium with f(T)=0.50f(T) = 0.50 and f(R)=0.30f(R) = 0.30. Industrial runoff suddenly contaminates the soil, killing all non-tolerant plants (tttt) before flowering, while tolerant plants (TTTT and TtTt) survive with equal fitness (100%100\% survival). Assume metal contamination does not affect flower color fitness directly, and surviving plants mate randomly. Calculate: (a) the new allele frequency p′p' of TT among the surviving parents, (b) the frequency of the homozygous recessive non-tolerant genotype (tttt) in the next generation (F1F_1), and (c) the overall phenotypic proportion of plants in the F1F_1 generation that are both metal-tolerant and red-flowered.

Answer and steps

Final answer

(a) p′=f(T)=23≈0.667p' = f(T) = \frac{2}{3} \approx 0.667; (b) f(tt)F1=(q′)2=(13)2=19≈0.111f(tt)_{F_1} = (q')^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9} \approx 0.111; (c) Proportion tolerant and red = (1−19)×[1−(1−0.30)2]=89×0.510=0.453\left(1 - \frac{1}{9}\right) \times [1 - (1 - 0.30)^2] = \frac{8}{9} \times 0.510 = 0.453 (or 45.3%45.3\%).

Steps

01

Initial Genotype Frequencies at the Tolerance Locus

In the baseline population, the tolerance locus is in Hardy-Weinberg equilibrium with p=f(T)=0.50p = f(T) = 0.50 and q=f(t)=1−0.50=0.50q = f(t) = 1 - 0.50 = 0.50.

The genotype frequencies prior to contamination are:

  • f(TT)=p2=(0.50)2=0.25f(TT) = p^2 = (0.50)^2 = 0.25
  • f(Tt)=2pq=2(0.50)(0.50)=0.50f(Tt) = 2pq = 2(0.50)(0.50) = 0.50
  • f(tt)=q2=(0.50)2=0.25f(tt) = q^2 = (0.50)^2 = 0.25

02

Allele Frequency p′p' Among Surviving Parents (Part a)

All non-tolerant plants (tttt) die before reproducing, leaving only TTTT and TtTt individuals.

  1. Calculate the proportion of survivors: Total survivors=f(TT)+f(Tt)=0.25+0.50=0.75\text{Total survivors} = f(TT) + f(Tt) = 0.25 + 0.50 = 0.75
  2. Normalize the surviving genotype frequencies:

    • f′(TT)=0.250.75=13f'(TT) = \frac{0.25}{0.75} = \frac{1}{3}
    • f′(Tt)=0.500.75=23f'(Tt) = \frac{0.50}{0.75} = \frac{2}{3}
  3. Calculate the new allele frequency p′p' of TT: p′=f′(TT)+12f′(Tt)=13+12(23)=23≈0.667p' = f'(TT) + \frac{1}{2}f'(Tt) = \frac{1}{3} + \frac{1}{2}\left(\frac{2}{3}\right) = \frac{2}{3} \approx 0.667

Correspondingly, the recessive allele frequency among survivors is: q′=1−p′=13≈0.333q' = 1 - p' = \frac{1}{3} \approx 0.333


03

Genotype Frequency of tttt in the F1F_1 Generation (Part b)

Because surviving parents mate randomly, the offspring genotypes follow Hardy-Weinberg expectations based on the parental allele frequencies p′p' and q′q': f(tt)F1=(q′)2=(13)2=19≈0.111f(tt)_{F_1} = (q')^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9} \approx 0.111

Common Pitfall: Even though all tttt individuals were eliminated in the parental generation, the recessive allele tt is carried by heterozygous survivors (TtTt). Consequently, homozygous recessive individuals (tttt) reappear in the next generation.


04

Proportion of F1F_1 Plants That Are Both Tolerant and Red (Part c)

Because the two loci assort independently and selection acted only on the tolerance locus, we can compute the probability of each phenotype separately and multiply them:

  1. Phenotypic frequency of tolerance in F1F_1: P(tolerant)=1−f(tt)F1=1−19=89≈0.889P(\text{tolerant}) = 1 - f(tt)_{F_1} = 1 - \frac{1}{9} = \frac{8}{9} \approx 0.889
  2. Phenotypic frequency of red flowers in F1F_1: The flower color locus experiences no selection and remains in Hardy-Weinberg equilibrium with f(R)=0.30f(R) = 0.30 and f(r)=1−0.30=0.70f(r) = 1 - 0.30 = 0.70. P(white)=f(rr)=(0.70)2=0.490P(\text{white}) = f(rr) = (0.70)^2 = 0.490 P(red)=1−f(rr)=1−0.490=0.510P(\text{red}) = 1 - f(rr) = 1 - 0.490 = 0.510
  3. Combined phenotype frequency: P(tolerant and red)=P(tolerant)⋅P(red)=89⋅0.510≈0.453 (or 45.3%)P(\text{tolerant and red}) = P(\text{tolerant}) \cdot P(\text{red}) = \frac{8}{9} \cdot 0.510 \approx 0.453 \text{ (or } 45.3\%)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to re-normalize genotype frequencies by the total survival rate after lethal selection against tt individuals.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f(TT)=0.502=0.25  ⟹  f(Tt)=2(0.50)(0.50)=0.50  ⟹  p′=0.25+0.5(0.50)=0.50f(TT) = 0.50^2 = 0.25 \implies f(Tt) = 2(0.50)(0.50) = 0.50 \implies p' = 0.25 + 0.5(0.50) = 0.50

    Correct

    Total survivors=0.25+0.50=0.75  ⟹  p′=0.25+0.5(0.50)0.75=23≈0.667\text{Total survivors} = 0.25 + 0.50 = 0.75 \implies p' = \frac{0.25 + 0.5(0.50)}{0.75} = \frac{2}{3} \approx 0.667

    You calculated the initial genotype frequencies correctly, but when tttt individuals died, the remaining gene pool was composed only of the 75%75\% surviving plants. You must divide the surviving allele contributions by the total survival rate (0.750.75) to find the new allele frequency p′p'.

  2. Step 2

    q′=1−0.50=0.50  ⟹  f(tt)=(q′)2=0.502=0.25q' = 1 - 0.50 = 0.50 \implies f(tt) = (q')^2 = 0.50^2 = 0.25

    Correct

    q′=1−23=13  ⟹  f(tt)F1=(q′)2=(13)2=19≈0.111q' = 1 - \frac{2}{3} = \frac{1}{3} \implies f(tt)_{F_1} = (q')^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9} \approx 0.111

    Your formula f(tt)=(q′)2f(tt) = (q')^2 is correct, but your answer is affected by propagating the unadjusted allele frequency q′=0.50q' = 0.50 from Step 1.

  3. Step 3

    P(red)=1−0.702=0.51P(\text{red}) = 1 - 0.70^2 = 0.51

  4. Step 4

    P(tolerant)=1−0.25=0.75  ⟹  P(tolerant and red)=0.75×0.51=0.3825P(\text{tolerant}) = 1 - 0.25 = 0.75 \implies P(\text{tolerant and red}) = 0.75 \times 0.51 = 0.3825

    Correct

    P(tolerant)=1−19=89  ⟹  P(tolerant and red)=89×0.510≈0.453P(\text{tolerant}) = 1 - \frac{1}{9} = \frac{8}{9} \implies P(\text{tolerant and red}) = \frac{8}{9} \times 0.510 \approx 0.453

    You correctly applied the product rule for independently assorting traits, but the numerical result is affected by the incorrect tolerance frequency from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the baseline Hardy-Weinberg genotype frequencies before selection.

You correctly calculated the phenotypic frequency of red flowers using 1−qR21 - q_R^2.

You correctly recognized that the joint probability of independent traits is the product of their individual probabilities.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Post-Selection Normalization

You summed the allele contributions across surviving genotypes without dividing by the proportion of survivors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated allele frequencies after selection as absolute proportions of the initial population rather than re-normalizing the gene pool of the surviving breeding parents to 1.01.0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Post-Selection Gene Pool Re-normalization
  • When selection eliminates a genotype, surviving allele frequencies must be normalized: p′=f(TT)+12f(Tt)wˉp' = \frac{f(TT) + \frac{1}{2}f(Tt)}{\bar{w}}, where wˉ\bar{w} is the mean population fitness (total surviving fraction).

  • Always compute the total fraction of surviving individuals first and divide all surviving genotype frequencies by this sum before calculating new allele frequencies.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum the frequencies of surviving genotypes: wˉ=f(TT)+f(Tt)=0.25+0.50=0.75\bar{w} = f(TT) + f(Tt) = 0.25 + 0.50 = 0.75.

  2. Normalize surviving genotypes: f′(TT)=0.250.75=13f'(TT) = \frac{0.25}{0.75} = \frac{1}{3} and f′(Tt)=0.500.75=23f'(Tt) = \frac{0.50}{0.75} = \frac{2}{3}.

  3. Calculate parental allele frequencies: p′=13+12(23)=23p' = \frac{1}{3} + \frac{1}{2}\left(\frac{2}{3}\right) = \frac{2}{3}, so q′=13q' = \frac{1}{3}.

  4. Determine F1F_1 non-tolerant genotype frequency: f(tt)F1=(q′)2=(13)2=19≈0.111f(tt)_{F_1} = (q')^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9} \approx 0.111.

  5. Multiply the independent phenotype frequencies: P(tolerant and red)=(1−19)×0.510=89×0.510≈0.453P(\text{tolerant and red}) = \left(1 - \frac{1}{9}\right) \times 0.510 = \frac{8}{9} \times 0.510 \approx 0.453.

Final answer

(a) p′=23≈0.667p' = \frac{2}{3} \approx 0.667; (b) f(tt)F1=19≈0.111f(tt)_{F_1} = \frac{1}{9} \approx 0.111; (c) Proportion tolerant and red ≈0.453\approx 0.453 (or 45.3%45.3\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how mean fitness wˉ\bar{w} acts as a normalizing denominator after directional selection.

  • Practice post-selection Hardy-Weinberg problems involving complete lethality of recessive homozygotes.

  • Work through the flashcards and practice problems below to master allele frequency recalculation.

OverviewACEpath Teacher's Diagnosis

02 The student miscalculates the proportion of red-flowered plants by taking only the homozygous dominant frequency p² instead of accounting for both homozygous and heterozygous dominant genotypes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f(TT)=0.250.75=13  ⟹  f(Tt)=0.500.75=23  ⟹  p′=13+0.5(23)=23f(TT) = \frac{0.25}{0.75} = \frac{1}{3} \implies f(Tt) = \frac{0.50}{0.75} = \frac{2}{3} \implies p' = \frac{1}{3} + 0.5\left(\frac{2}{3}\right) = \frac{2}{3}

  2. Step 2

    q′=1−23=13  ⟹  f(tt)=(13)2=19q' = 1 - \frac{2}{3} = \frac{1}{3} \implies f(tt) = \left(\frac{1}{3}\right)^2 = \frac{1}{9}

  3. Step 3

    P(tolerant)=1−19=89P(\text{tolerant}) = 1 - \frac{1}{9} = \frac{8}{9}

  4. Step 4

    P(red)=f(RR)=0.302=0.09P(\text{red}) = f(RR) = 0.30^2 = 0.09

    Correct

    P(red)=f(RR)+f(Rr)=1−f(rr)=1−(1−0.30)2=1−0.49=0.51P(\text{red}) = f(RR) + f(Rr) = 1 - f(rr) = 1 - (1 - 0.30)^2 = 1 - 0.49 = 0.51

    Because allele RR is dominant, both RRRR and RrRr genotypes display red flowers. Taking only f(RR)=p2f(RR) = p^2 leaves out all heterozygous red plants.

  5. Step 5

    P(tolerant and red)=(89)×0.09=0.08P(\text{tolerant and red}) = \left(\frac{8}{9}\right) \times 0.09 = 0.08

    Correct

    P(tolerant and red)=89×0.510=68150≈0.453P(\text{tolerant and red}) = \frac{8}{9} \times 0.510 = \frac{68}{150} \approx 0.453

    Your product rule setup was logical, but your final answer was thrown off by the incorrect value of P(red)P(\text{red}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly normalized the surviving genotypes after complete negative selection against tttt.

You calculated the new allele frequency p′p' and the resulting F1F_1 genotype frequency f(tt)f(tt) accurately.

You correctly recognized that the tolerance and flower color loci assort independently and can be multiplied.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dominant Phenotype Equated to Homozygous Dominant Genotype

You set the dominant phenotypic frequency equal to p2p^2 instead of p2+2pqp^2 + 2pq.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing dominant phenotypic frequency with homozygous dominant genotype frequency. Under complete dominance, individuals with either one or two copies of the dominant allele express the dominant trait, so P(dominant)=1−q2P(\text{dominant}) = 1 - q^2, not just p2p^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dominant Phenotype Rule
  • For a trait with complete dominance, P(dominant phenotype)=f(AA)+f(Aa)=p2+2pq=1−q2P(\text{dominant phenotype}) = f(AA) + f(Aa) = p^2 + 2pq = 1 - q^2.

  • Whenever a question asks for a dominant phenotype proportion, calculate 1−q21 - q^2 (or add p2+2pqp^2 + 2pq) rather than taking only p2p^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the recessive allele frequency for flower color: qr=1−f(R)=1−0.30=0.70q_r = 1 - f(R) = 1 - 0.30 = 0.70.

  2. Calculate the frequency of the recessive white phenotype: f(rr)=qr2=0.702=0.49f(rr) = q_r^2 = 0.70^2 = 0.49.

  3. Find the total frequency of red flowers using the complement rule: P(red)=1−f(rr)=1−0.49=0.51P(\text{red}) = 1 - f(rr) = 1 - 0.49 = 0.51.

  4. Multiply the two independent phenotypic probabilities: P(tolerant and red)=P(tolerant)×P(red)=89×0.510≈0.453P(\text{tolerant and red}) = P(\text{tolerant}) \times P(\text{red}) = \frac{8}{9} \times 0.510 \approx 0.453.

Final answer

89×0.510≈0.453\frac{8}{9} \times 0.510 \approx 0.453 (or 45.3%45.3\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between genotype frequency (p2,2pq,q2p^2, 2pq, q^2) and phenotype frequency (p2+2pqp^2 + 2pq vs. q2q^2) under complete dominance.

  • Practice using the complement shortcut P(dominant)=1−q2P(\text{dominant}) = 1 - q^2 to avoid missing heterozygotes.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes that eliminating all non-tolerant tt parents permanently removes the recessive allele t from producing tt offspring in the F1 generation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f(TT)=0.250.75=13  ⟹  f(Tt)=0.500.75=23  ⟹  p′=13+(12)(23)=23f(TT) = \frac{0.25}{0.75} = \frac{1}{3} \implies f(Tt) = \frac{0.50}{0.75} = \frac{2}{3} \implies p' = \frac{1}{3} + \left(\frac{1}{2}\right)\left(\frac{2}{3}\right) = \frac{2}{3}

  2. Step 2

    All tttt parents died before reproduction   ⟹  f(tt)=0\implies f(tt) = 0

    Correct

    f(tt)F1=(q′)2=(13)2=19≈0.111f(tt)_{F_1} = (q')^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9} \approx 0.111

    Even though all homozygous recessive parents died, the recessive allele tt is still carried by heterozygous survivors (TtTt) at frequency q′=1−p′=13q' = 1 - p' = \frac{1}{3}. Under random mating, offspring inherit alleles from this pool, yielding f(tt)F1=(q′)2=19f(tt)_{F_1} = (q')^2 = \frac{1}{9}.

  3. Step 3

    P(tolerant)=1.00  ⟹  P(red)=1−0.702=0.51  ⟹  P(tolerant and red)=1.00×0.51=0.51P(\text{tolerant}) = 1.00 \implies P(\text{red}) = 1 - 0.70^2 = 0.51 \implies P(\text{tolerant and red}) = 1.00 \times 0.51 = 0.51

    Correct

    P(tolerant and red)=(1−19)×0.510=89×0.510≈0.453P(\text{tolerant and red}) = \left(1 - \frac{1}{9}\right) \times 0.510 = \frac{8}{9} \times 0.510 \approx 0.453

    Your calculation of P(red)=0.51P(\text{red}) = 0.51 and the multiplication rule for independent loci were completely correct, but your final answer was affected by using P(tolerant)=1.00P(\text{tolerant}) = 1.00 instead of 1−19=891 - \frac{1}{9} = \frac{8}{9}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly normalized the surviving genotype frequencies after selection against the homozygous recessive phenotype.

You accurately computed the new allele frequency p′p' among surviving parents.

You correctly computed the frequency of the dominant red phenotype at the independent locus using 1−qR21 - q_R^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Recessive allele persistence in heterozygotes

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated complete selection against a recessive phenotype in the parental generation as complete elimination of the recessive phenotype in the offspring, forgetting that recessive alleles remain hidden in heterozygous survivors and pair up during random mating.

REASONING PATH
Your ACEpath teacher’s suggested approach
Allele vs. Genotype Persistence
  • Complete selection against a recessive phenotype (s=1s = 1) removes homozygous recessive parents, but it does not eliminate the recessive allele because heterozygotes survive.

  • Always find the recessive allele frequency among survivors (q′=1−p′q' = 1 - p') and calculate offspring homozygous recessives as (q′)2(q')^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the recessive allele frequency in surviving parents: q′=1−p′=1−23=13q' = 1 - p' = 1 - \frac{2}{3} = \frac{1}{3}.

  2. Use random mating to find the offspring frequency of non-tolerant plants: f(tt)F1=(q′)2=(13)2=19f(tt)_{F_1} = (q')^2 = \left(\frac{1}{3}\right)^2 = \frac{1}{9}.

  3. Find the proportion of tolerant F1F_1 plants: P(tolerant)=1−f(tt)F1=1−19=89P(\text{tolerant}) = 1 - f(tt)_{F_1} = 1 - \frac{1}{9} = \frac{8}{9}.

  4. Multiply by the probability of red flowers: P(tolerant and red)=89×0.510=4.089≈0.453P(\text{tolerant and red}) = \frac{8}{9} \times 0.510 = \frac{4.08}{9} \approx 0.453.

Final answer

(a) p′=23≈0.667p' = \frac{2}{3} \approx 0.667; (b) f(tt)F1=19≈0.111f(tt)_{F_1} = \frac{1}{9} \approx 0.111; (c) 0.4530.453 (or 45.3%45.3\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how natural selection alters allele frequencies without completely purging recessive alleles in a single generation.

  • Practice computing offspring genotype frequencies from survivor allele pools using (p′)2+2p′q′+(q′)2=1(p')^2 + 2p'q' + (q')^2 = 1.

Lock it in

Similar question

01

In a population of diploid insects in Hardy-Weinberg equilibrium, the initial frequency of a recessive lethal allele aa is q=0.20q = 0.20. An environmental toxin eliminates all aaaa individuals before mating. Calculate the new frequency q′q' of allele aa among the surviving adults and the expected frequency of aaaa larvae in the next generation.

Answer

q′=16≈0.167q' = \frac{1}{6} \approx 0.167; f(aa)F1=136≈0.028f(aa)_{F_1} = \frac{1}{36} \approx 0.028.

Key steps:

  1. Surviving proportion wˉ=1−q2=1−0.04=0.96\bar{w} = 1 - q^2 = 1 - 0.04 = 0.96.
  2. Surviving allele frequency q′=pqwˉ=0.80×0.200.96=0.160.96=16q' = \frac{pq}{\bar{w}} = \frac{0.80 \times 0.20}{0.96} = \frac{0.16}{0.96} = \frac{1}{6}.
  3. Next generation f(aa)=(q′)2=(16)2=136≈0.028f(aa) = (q')^2 = \left(\frac{1}{6}\right)^2 = \frac{1}{36} \approx 0.028.
02

A diploid plant population has initial allele frequencies p=f(B)=0.60p = f(B) = 0.60 and q=f(b)=0.40q = f(b) = 0.40 in Hardy-Weinberg equilibrium. A fungal pathogen kills 50%50\% of bbbb plants and 0%0\% of BBBB and BbBb plants before flowering. Calculate the allele frequency q′q' among surviving reproducing adults.

Answer

q′≈0.348q' \approx 0.348.

Key steps:

  1. Initial genotype frequencies: f(BB)=0.36f(BB) = 0.36, f(Bb)=0.48f(Bb) = 0.48, f(bb)=0.16f(bb) = 0.16.
  2. Survivors after selection: BB=0.36BB = 0.36, Bb=0.48Bb = 0.48, bb=0.16×0.50=0.08bb = 0.16 \times 0.50 = 0.08.
  3. Total survivors wˉ=0.36+0.48+0.08=0.92\bar{w} = 0.36 + 0.48 + 0.08 = 0.92.
  4. q′=12(0.48)+0.080.92=0.24+0.080.92=0.320.92=823≈0.348q' = \frac{\frac{1}{2}(0.48) + 0.08}{0.92} = \frac{0.24 + 0.08}{0.92} = \frac{0.32}{0.92} = \frac{8}{23} \approx 0.348.
03

In a population of mice, coat color is determined by locus BB (BB black, bb brown, where qb=0.50q_b = 0.50), and tail length is determined by an independent locus TT (TT long, tt short, where qt=0.40q_t = 0.40). Both loci are initially in Hardy-Weinberg equilibrium. A predator selectively kills all homozygous brown mice (bbbb) before reproduction, with no effect on locus TT. Calculate the phenotypic proportion of mice in the next generation that are both black-coated and short-tailed.

Answer

Proportion ≈0.142\approx 0.142 (or 14.2%14.2\%).

Key steps:

  1. Complete lethality of bbbb changes qb′q_b' to qb1+qb=0.501.50=13\frac{q_b}{1 + q_b} = \frac{0.50}{1.50} = \frac{1}{3}.
  2. Next generation brown frequency: f(bb)F1=(qb′)2=19f(bb)_{F_1} = (q_b')^2 = \frac{1}{9}. Thus, P(black)=1−19=89P(\text{black}) = 1 - \frac{1}{9} = \frac{8}{9}.
  3. Locus TT experiences no selection: P(short)=f(tt)=qt2=(0.40)2=0.16P(\text{short}) = f(tt) = q_t^2 = (0.40)^2 = 0.16.
  4. Independent assortment: P(black and short)=89×0.16=1.289≈0.142P(\text{black and short}) = \frac{8}{9} \times 0.16 = \frac{1.28}{9} \approx 0.142.
Loading workspace…