Resources

In Escherichia coli, the lac operon couples transcriptional regulation to metabolic flux. A culture is grown in a chemostat with an initial steady-state beta-galactosidase expression level of 120 Miller units120\text{ Miller units}, hydrolyzing lactose at a rate of Jlac=2.40×10−3 mmol/(L⋅min)J_{\text{lac}} = 2.40 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min}). Upon addition of cyclic AMP (cAMP) and allolactose, lacZ transcription increases by a factor of 8.508.50. Concurrently, a competitive chemical inhibitor of beta-galactosidase is introduced, reducing the catalytic efficiency (kcat/Kmk_{\text{cat}}/K_m) of each synthesized enzyme molecule by 60.0%60.0\%. Calculate the resulting lactose hydrolysis rate Jlac,newJ_{\text{lac},\text{new}} in mmol/(L⋅min)\text{mmol}/(\text{L}\cdot\text{min}), assuming the intracellular enzyme concentration remains proportional to lacZ expression.

Answer and steps

Final answer

8.16×10−3 mmol/(L⋅min)8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

Steps

01

Relate Metabolic Flux to Enzyme Abundance and Catalytic Efficiency

To find the new lactose hydrolysis rate Jlac,newJ_{\text{lac},\text{new}}, we determine how both the enzyme concentration and the catalytic activity per enzyme molecule change relative to the initial state.

The enzymatic hydrolysis rate (flux) JlacJ_{\text{lac}} under steady-state conditions is directly proportional to the total concentration of functional enzyme [E][E] and its effective catalytic rate per molecule:

Jlac∝[E]⋅(kcatKm)J_{\text{lac}} \propto [E] \cdot \left(\frac{k_{\text{cat}}}{K_m}\right)

02

Determine the Change in Enzyme Abundance

Because intracellular β\beta-galactosidase concentration [E][E] remains proportional to lacZ transcription:

  • Upregulation by a factor of 8.508.50 means: [E]new=8.50⋅[E]initial[E]_{\text{new}} = 8.50 \cdot [E]_{\text{initial}}
03

Determine the Residual Catalytic Efficiency

A competitive inhibitor reduces the catalytic efficiency of each enzyme molecule by 60.0%60.0\%.

  • The remaining, or fractional, activity is: Fraction remaining=1.00−0.600=0.400\text{Fraction remaining} = 1.00 - 0.600 = 0.400

(Pitfall: Be careful not to multiply directly by the reduction percentage of 0.6000.600; a reduction by 60.0%60.0\% leaves an active fraction of 40.0%40.0\%.)

04

Calculate the Overall Scaling Factor and the New Rate

Combining the increase in enzyme abundance with the decrease in per-molecule activity gives the overall scaling factor for metabolic flux:

Overall factor=8.50⋅0.400=3.40\text{Overall factor} = 8.50 \cdot 0.400 = 3.40

Now, multiply the initial rate by this factor:

Jlac,new=Jlac⋅3.40J_{\text{lac},\text{new}} = J_{\text{lac}} \cdot 3.40

Jlac,new=(2.40×10−3 mmol/(L⋅min))⋅3.40=8.16×10−3 mmol/(L⋅min)J_{\text{lac},\text{new}} = \left(2.40 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})\right) \cdot 3.40 = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by the reduction fraction of 0.600 instead of the remaining fractional efficiency of 0.400.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [E]new=8.50⋅[E]0[E]_{\text{new}} = 8.50 \cdot [E]_0

  2. Step 2

    Efficiency factor=0.600\text{Efficiency factor} = 0.600

    Correct

    Efficiency factor=1.00−0.600=0.400\text{Efficiency factor} = 1.00 - 0.600 = 0.400

    The problem states that catalytic efficiency was reduced by 60.0%60.0\%, which leaves a residual fractional activity of 1.00−0.600=0.4001.00 - 0.600 = 0.400 (40.0%40.0\%). Using 0.6000.600 represents the amount lost rather than the fraction retained.

  3. Step 3

    Jlac, new=2.40×10−3⋅8.50⋅0.600  ⟹  Jlac, new=1.224×10−2 mmol/(L⋅min)J_{\text{lac, new}} = 2.40 \times 10^{-3} \cdot 8.50 \cdot 0.600 \implies J_{\text{lac, new}} = 1.224 \times 10^{-2}\text{ mmol}/(\text{L}\cdot\text{min})

    Correct

    Jlac, new=2.40×10−3⋅8.50⋅0.400=8.16×10−3 mmol/(L⋅min)J_{\text{lac, new}} = 2.40 \times 10^{-3} \cdot 8.50 \cdot 0.400 = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

    Your multiplication was mechanically correct based on your efficiency factor, but the numerical answer was thrown off by the earlier misinterpretation of the reduction percentage.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that enzyme concentration scales directly with transcriptional upregulation.

You correctly structured the overall metabolic flux as the product of initial flux, the abundance factor, and the efficiency factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage reduction vs. residual fraction confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the fractional decrease (0.6000.600) directly into the rate equation instead of calculating the surviving active fraction (1.00−0.600=0.4001.00 - 0.600 = 0.400).

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting Percentage Changes
  • When a biological parameter decreases by X%X\%, the remaining functional activity is scaled by a factor of (1−X/100)(1 - X/100).

  • Always verify whether a given percentage describes the final retained fraction ('reduced to X%X\%') or the loss ('reduced by X%X\%').

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the remaining catalytic efficiency factor: 1.00−0.600=0.4001.00 - 0.600 = 0.400.

  2. Multiply the initial rate by both the abundance multiplier and the residual efficiency factor: Jlac, new=(2.40×10−3 mmol/(L⋅min))⋅8.50⋅0.400J_{\text{lac, new}} = \left(2.40 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})\right) \cdot 8.50 \cdot 0.400.

  3. Compute the final flux: Jlac, new=8.16×10−3 mmol/(L⋅min)J_{\text{lac, new}} = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min}).

Final answer

8.16×10−3 mmol/(L⋅min)8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with enzyme inhibitors or expression changes, re-read the preposition carefully: 'reduced by' means (1−fraction)(1 - \text{fraction}), while 'reduced to' means (fraction)(\text{fraction}).

  • Practice separating overall metabolic flux problems into independent scaling factors (abundance ×\times catalytic efficiency) before multiplying.

OverviewACEpath Teacher's Diagnosis

02 The student treats the 60.0% reduction as subtracting 0.60 from the 8.50-fold factor rather than applying it multiplicatively to catalytic activity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Net fold change=8.50−0.60=7.90\text{Net fold change} = 8.50 - 0.60 = 7.90

    Correct

    Overall factor=8.50×(1−0.600)=8.50×0.400=3.40\text{Overall factor} = 8.50 \times (1 - 0.600) = 8.50 \times 0.400 = 3.40

    You subtracted the 60.0%60.0\% inhibition directly from the transcription fold change. Because overall enzymatic flux is proportional to total enzyme concentration multiplied by catalytic efficiency per molecule, independent fractional changes combine multiplicatively: 8.50×(1−0.600)=3.408.50 \times (1 - 0.600) = 3.40.

  2. Step 2

    JLac, new=2.40×10−3⋅7.90  ⟹  JLac, new=1.896×10−2 mmol/(L⋅min)J_{\text{Lac, new}} = 2.40 \times 10^{-3} \cdot 7.90 \implies J_{\text{Lac, new}} = 1.896 \times 10^{-2}\text{ mmol}/(\text{L}\cdot\text{min})

    Correct

    Jlac, new=(2.40×10−3 mmol/(L⋅min))×3.40=8.16×10−3 mmol/(L⋅min)J_{\text{lac, new}} = (2.40 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})) \times 3.40 = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

    You correctly carried your net factor into the final product, but the value was affected by the additive error in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the initial rate scales with the combined effect of enzyme induction and catalytic inhibition.

You carried out the arithmetic multiplication in your final step accurately according to your calculated factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Additive vs Multiplicative Compounding

No, this is a conceptual error involving how independent scaling factors combine in enzyme kinetics.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a percentage decrease in catalytic efficiency as an additive subtraction from the transcriptional fold-change multiplier rather than calculating the residual efficiency (1−0.60=0.401 - 0.60 = 0.40) and multiplying the two independent factors.

REASONING PATH
Your ACEpath teacher’s suggested approach
Combining Independent Kinetic Modifiers
  • When a rate depends on the product of two independent variables (J∝[E]⋅keffJ \propto [E] \cdot k_{\text{eff}}), overall flux scales as the product of the individual relative changes: JnewJinitial=([E]new[E]initial)×(keff, newkeff, initial)\frac{J_{\text{new}}}{J_{\text{initial}}} = \left(\frac{[E]_{\text{new}}}{[E]_{\text{initial}}}\right) \times \left(\frac{k_{\text{eff, new}}}{k_{\text{eff, initial}}}\right).

  • Convert percentage changes to decimal fractions of remaining activity, then multiply all fold-change factors together.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the remaining catalytic activity fraction: 1.00−0.600=0.4001.00 - 0.600 = 0.400.

  2. Multiply the transcriptional fold-change by the residual catalytic activity: 8.50×0.400=3.408.50 \times 0.400 = 3.40.

  3. Multiply the initial lactose hydrolysis rate by this combined scaling factor: (2.40×10−3 mmol/(L⋅min))×3.40=8.16×10−3 mmol/(L⋅min)(2.40 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})) \times 3.40 = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min}).

Final answer

8.16×10−3 mmol/(L⋅min)8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always express percentage reductions as residual retention fractions: a reduction by p%p\% means multiplying by (1−p/100)(1 - p/100).

  • Combine distinct biological levers (e.g., enzyme abundance and per-enzyme activity) multiplicatively rather than additively.

OverviewACEpath Teacher's Diagnosis

03 The student accounts only for the transcriptional upregulation and completely ignores the effect of the chemical inhibitor on catalytic efficiency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [E]new=8.50⋅[E]0[E]_{\text{new}} = 8.50 \cdot [E]_0

  2. Step 2

    Jlac,new=2.40×10−3⋅8.50  ⟹  Jlac,new=2.04×10−2 mmol/(L⋅min)J_{\text{lac},\text{new}} = 2.40 \times 10^{-3} \cdot 8.50 \implies J_{\text{lac},\text{new}} = 2.04 \times 10^{-2}\text{ mmol}/(\text{L}\cdot\text{min})

    Correct

    Jlac,new=2.40×10−3⋅8.50⋅(1−0.600)=8.16×10−3 mmol/(L⋅min)J_{\text{lac},\text{new}} = 2.40 \times 10^{-3} \cdot 8.50 \cdot (1 - 0.600) = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

    You applied the transcriptional multiplier directly to the reaction flux without incorporating the inhibitor effect, which leaves only 1.00−0.600=0.4001.00 - 0.600 = 0.400 (40.0%40.0\%) of the per-enzyme catalytic efficiency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the intracellular enzyme concentration scales proportionally with gene transcription by a factor of 8.508.50.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of post-translational / catalytic inhibition factor

You calculated the flux change solely from transcriptional upregulation and skipped the inhibitor's effect on catalytic efficiency.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Metabolic flux depends multiplicatively on both total functional enzyme abundance [E][E] and specific catalytic efficiency (kcat/Kmk_{\text{cat}}/K_m). When environmental conditions alter both expression level and specific activity, the overall rate scales as the product of both scaling factors: Factortotal=Factorabundance⋅(1−Fractioninhibited)\text{Factor}_{\text{total}} = \text{Factor}_{\text{abundance}} \cdot (1 - \text{Fraction}_{\text{inhibited}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dual Regulation Check
  • Steady-state enzymatic flux obeys J∝[E]⋅(kcat/Km)J \propto [E] \cdot (k_{\text{cat}}/K_m).

  • Always list every factor modifying enzyme quantity alongside every factor modifying catalytic activity before computing the new reaction rate.

Inhibition Reduction vs. Fractional Activity
  • A decrease 'by X%X\%' means the remaining fractional efficiency is (1−X/100)(1 - X/100).

  • Multiply the base efficiency by (1−0.600)=0.400(1 - 0.600) = 0.400, not by 1.001.00 or directly by the percentage decrease.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the residual catalytic efficiency: fraction remaining=1.00−0.600=0.400\text{fraction remaining} = 1.00 - 0.600 = 0.400.

  2. Combine both scaling factors: overall factor=8.50⋅0.400=3.40\text{overall factor} = 8.50 \cdot 0.400 = 3.40.

  3. Multiply the baseline flux by the combined factor: Jlac,new=2.40×10−3 mmol/(L⋅min)⋅3.40=8.16×10−3 mmol/(L⋅min)J_{\text{lac},\text{new}} = 2.40 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min}) \cdot 3.40 = 8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min}).

Final answer

8.16×10−3 mmol/(L⋅min)8.16 \times 10^{-3}\text{ mmol}/(\text{L}\cdot\text{min})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between transcriptional control (altering [E][E]) and enzymatic inhibition (altering kcatk_{\text{cat}} or KmK_m).

  • Practice solving coupled metabolic flux problems where both protein synthesis and catalytic turnover vary simultaneously.

Lock it in

Similar question

01

A bacterial strain expresses phosphofructokinase yielding a glycolytic flux of 1.50 mmol/(L⋅min)1.50\text{ mmol}/(\text{L}\cdot\text{min}). After heat shock, enzyme expression decreases by 40.0%40.0\%, but an allosteric activator increases the catalytic turnover per molecule by 50.0%50.0\%. Calculate the new glycolytic flux in mmol/(L⋅min)\text{mmol}/(\text{L}\cdot\text{min}).

Answer

1.35 mmol/(L⋅min)1.35\text{ mmol}/(\text{L}\cdot\text{min}). Remaining abundance =1.00−0.400=0.600= 1.00 - 0.400 = 0.600; new catalytic turnover factor =1.00+0.500=1.50= 1.00 + 0.500 = 1.50. Combined scaling factor =0.600×1.50=0.900= 0.600 \times 1.50 = 0.900. Jnew=1.50×0.900=1.35 mmol/(L⋅min)J_{\text{new}} = 1.50 \times 0.900 = 1.35\text{ mmol}/(\text{L}\cdot\text{min}).

02

In a mammalian cell line, transcription of GLUT4 is stimulated by insulin, raising membrane transporter density by a factor of 3.203.20. Simultaneously, partial endocytosis decreases transport efficiency per carrier by 25.0%25.0\%. If the basal glucose uptake rate is 0.80 mmol/(L⋅h)0.80\text{ mmol}/(\text{L}\cdot\text{h}), what is the new uptake rate?

Answer

1.92 mmol/(L⋅h)1.92\text{ mmol}/(\text{L}\cdot\text{h}). Abundance factor =3.20= 3.20; remaining efficiency =1.00−0.250=0.750= 1.00 - 0.250 = 0.750. Overall multiplier =3.20×0.750=2.40= 3.20 \times 0.750 = 2.40. Jnew=0.80×2.40=1.92 mmol/(L⋅h)J_{\text{new}} = 0.80 \times 2.40 = 1.92\text{ mmol}/(\text{L}\cdot\text{h}).

03

A continuous culture metabolizes substrate at 5.00×10−2 mol/(L⋅h)5.00 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{h}). Operon derepression increases metabolic enzyme synthesis by a factor of 6.006.00. However, a competitive inhibitor is introduced at a concentration where I=3KiI = 3 K_i, meaning the apparent KmK_m increases four-fold (so catalytic efficiency kcat/Kmk_{\text{cat}}/K_m drops by 75.0%75.0\%). Calculate the final substrate utilization rate.

Answer

7.50×10−2 mol/(L⋅h)7.50 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{h}). Synthesis multiplier =6.00= 6.00; catalytic efficiency decreases by 75.0%75.0\%, so remaining fraction =1.00−0.750=0.250= 1.00 - 0.750 = 0.250. Overall factor =6.00×0.250=1.50= 6.00 \times 0.250 = 1.50. Final rate =(5.00×10−2)×1.50=7.50×10−2 mol/(L⋅h)= (5.00 \times 10^{-2}) \times 1.50 = 7.50 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{h}).

Loading workspace…