Resources

During phloem translocation, active H+/sucrose\text{H}^+/\text{sucrose} symporters load sucrose into a companion cell of a source leaf, establishing an internal sucrose concentration of 0.650 M0.650\text{ M} at 20∘C20^\circ\text{C} (293.15 K293.15\text{ K}, i=1.0i = 1.0, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})). Adjacent xylem vessels deliver pure water at a hydrostatic pressure potential of Ψp,xylem=−0.180 MPa\Psi_{p,\text{xylem}} = -0.180\text{ MPa} and negligible solute content (Ψs,xylem=0 MPa\Psi_{s,\text{xylem}} = 0\text{ MPa}). Once endosmosis drives the sieve-tube element to complete water potential equilibrium with the adjacent xylem vessel, calculate the resulting positive hydrostatic turgor pressure (Ψp\Psi_p) within the phloem sieve tube. Round to three significant figures.

Answer and steps

Final answer

Ψp,phloem=+1.40 MPa\Psi_{p,\text{phloem}} = +1.40\text{ MPa}

Steps

01

Calculate the Total Water Potential of the Xylem Vessel

Total water potential (Ψ\Psi) is the sum of pressure potential (Ψp\Psi_p) and solute potential (Ψs\Psi_s):

Ψ=Ψp+Ψs\Psi = \Psi_p + \Psi_s

For the xylem vessel:

  • Ψp,xylem=−0.180 MPa\Psi_{p,\text{xylem}} = -0.180\text{ MPa} (tension/negative pressure)
  • Ψs,xylem=0 MPa\Psi_{s,\text{xylem}} = 0\text{ MPa}

Ψxylem=−0.180 MPa+0 MPa=−0.180 MPa\Psi_{\text{xylem}} = -0.180\text{ MPa} + 0\text{ MPa} = -0.180\text{ MPa}

02

Determine the Solute Potential of the Phloem Sieve Tube

Using the van 't Hoff equation for solute (osmotic) potential:

Ψs=−iCRT\Psi_s = -i C R T

Substitute the given values:

  • i=1.0i = 1.0
  • C=0.650 mol/LC = 0.650\text{ mol/L}
  • R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})
  • T=293.15 KT = 293.15\text{ K}

Ψs,phloem=−(1.0)⋅(0.650 mol/L)⋅(0.00831 L⋅MPa/(mol⋅K))⋅(293.15 K)\Psi_{s,\text{phloem}} = -(1.0) \cdot (0.650\text{ mol/L}) \cdot (0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})) \cdot (293.15\text{ K}) Ψs,phloem≈−1.5835 MPa\Psi_{s,\text{phloem}} \approx -1.5835\text{ MPa}

Common Pitfall: Remember that solute potential is always negative or zero. A higher solute concentration makes the solute potential more negative, drawing water inward.

03

Apply the Equilibrium Condition to Find Turgor Pressure

At water potential equilibrium between the adjacent xylem vessel and the phloem sieve-tube element:

Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}}

Substitute Ψphloem=Ψp,phloem+Ψs,phloem\Psi_{\text{phloem}} = \Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}} into the equilibrium equation:

Ψp,phloem+Ψs,phloem=Ψxylem\Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}} = \Psi_{\text{xylem}}

Rearrange to solve for the turgor pressure (Ψp,phloem\Psi_{p,\text{phloem}}):

Ψp,phloem=Ψxylem−Ψs,phloem\Psi_{p,\text{phloem}} = \Psi_{\text{xylem}} - \Psi_{s,\text{phloem}} Ψp,phloem=−0.180 MPa−(−1.5835 MPa)\Psi_{p,\text{phloem}} = -0.180\text{ MPa} - (-1.5835\text{ MPa}) Ψp,phloem=−0.180 MPa+1.5835 MPa=+1.4035 MPa\Psi_{p,\text{phloem}} = -0.180\text{ MPa} + 1.5835\text{ MPa} = +1.4035\text{ MPa}

Rounding to three significant figures gives +1.40 MPa+1.40\text{ MPa}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that solute potential is defined with a negative sign and treats Ψs as positive, leading to an incorrect negative turgor pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψs=iCRT=1.0×0.650×0.00831×293.15=1.583 MPa\Psi_s = iCRT = 1.0 \times 0.650 \times 0.00831 \times 293.15 = 1.583\text{ MPa}

    Correct

    Ψs,phloem=−iCRT=−(1.0)(0.650)(0.00831)(293.15)≈−1.584 MPa\Psi_{s,\text{phloem}} = -iCRT = -(1.0)(0.650)(0.00831)(293.15) \approx -1.584\text{ MPa}

    Solute potential measures the reduction in free energy of water caused by dissolved solutes, so it is always negative (or zero for pure water). The formula is Ψs=−iCRT\Psi_s = -iCRT, not +iCRT+iCRT.

  2. Step 2

    Ψxylem=−0.180 MPa\Psi_{\text{xylem}} = -0.180\text{ MPa}

  3. Step 3

    Ψphloem=Ψp+Ψs=−0.180 MPa\Psi_{\text{phloem}} = \Psi_p + \Psi_s = -0.180\text{ MPa}

  4. Step 4

    Ψp=−0.180−1.583=−1.76 MPa\Psi_p = -0.180 - 1.583 = -1.76\text{ MPa}

    Correct

    Ψp,phloem=Ψxylem−Ψs,phloem=−0.180−(−1.584)=+1.40 MPa\Psi_{p,\text{phloem}} = \Psi_{\text{xylem}} - \Psi_{s,\text{phloem}} = -0.180 - (-1.584) = +1.40\text{ MPa}

    Your rearrangement and subtraction were algebraically consistent with your earlier value, but because Ψs\Psi_s was positive instead of negative, the calculated turgor pressure became negative rather than positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that water potential equilibrium means Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}}.

You correctly evaluated total water potential as the sum of pressure potential and solute potential (Ψ=Ψp+Ψs\Psi = \Psi_p + \Psi_s).

You correctly substituted the thermodynamic constants and temperature into the van 't Hoff expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted negative sign in solute potential formula

You used Ψs=iCRT\Psi_s = iCRT instead of Ψs=−iCRT\Psi_s = -iCRT.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing osmotic pressure (Π=iCRT\Pi = iCRT, a positive colligative property) with solute potential (Ψs=−Π=−iCRT\Psi_s = -\Pi = -iCRT, an energy-lowering component of water potential that is always ≤0\le 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Sign Convention for Solute Potential
  • Adding solutes lowers the free energy of water relative to pure water at atmospheric pressure, so solute potential is always zero or negative: Ψs=−iCRT\Psi_s = -iCRT.

  • Whenever you calculate Ψs\Psi_s, write the negative sign explicitly before plugging in numbers, and verify that Ψs≤0\Psi_s \le 0.

Physical Reality Check for Living Cells
  • In living, pressurized plant cells such as phloem sieve elements, hydrostatic turgor pressure must be positive (Ψp>0\Psi_p > 0); negative values indicate tension, which occurs in xylem.

  • Check your final Ψp\Psi_p. If a cell taking up water has Ψp<0\Psi_p < 0, re-check the sign of Ψs\Psi_s.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate solute potential with the correct negative sign: Ψs,phloem=−(1.0)(0.650)(0.00831)(293.15)≈−1.584 MPa\Psi_{s,\text{phloem}} = -(1.0)(0.650)(0.00831)(293.15) \approx -1.584\text{ MPa}.

  2. Apply water potential equilibrium: Ψp,phloem+Ψs,phloem=Ψxylem=−0.180 MPa\Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}} = \Psi_{\text{xylem}} = -0.180\text{ MPa}.

  3. Solve for turgor pressure: Ψp,phloem=−0.180−(−1.584)=−0.180+1.584=+1.404 MPa\Psi_{p,\text{phloem}} = -0.180 - (-1.584) = -0.180 + 1.584 = +1.404\text{ MPa}.

Final answer

Ψp,phloem=+1.40 MPa\Psi_{p,\text{phloem}} = +1.40\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between osmotic pressure (Π\Pi) and solute potential (Ψs=−Π\Psi_s = -\Pi).

  • Practice water potential equilibrium problems where both xylem tension and phloem osmotic loading are present.

  • Always perform a sign reality check: solutes drive endosmosis, building positive hydrostatic pressure (Ψp>0\Psi_p > 0) inside walled cells.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the xylem's negative tension and assumes the reference water potential at equilibrium is 0 MPa.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψs=−iCRT=−(1.0)(0.650)(0.00831)(293.15)=−1.583 MPa\Psi_s = -iCRT = -(1.0)(0.650)(0.00831)(293.15) = -1.583\text{ MPa}

  2. Step 2

    Ψphloem=0 MPa  ⟹  Ψp+Ψs=0\Psi_{\text{phloem}} = 0\text{ MPa} \implies \Psi_p + \Psi_s = 0

    Correct

    Ψxylem=Ψp,xylem+Ψs,xylem=−0.180 MPa+0 MPa=−0.180 MPa  ⟹  Ψphloem=Ψxylem=−0.180 MPa\Psi_{\text{xylem}} = \Psi_{p,\text{xylem}} + \Psi_{s,\text{xylem}} = -0.180\text{ MPa} + 0\text{ MPa} = -0.180\text{ MPa} \implies \Psi_{\text{phloem}} = \Psi_{\text{xylem}} = -0.180\text{ MPa}

    You set Ψphloem\Psi_{\text{phloem}} to 0 MPa0\text{ MPa}, assuming pure water at atmospheric pressure. However, the phloem equilibrates with the adjacent xylem vessel, which is under negative tension (Ψp,xylem=−0.180 MPa\Psi_{p,\text{xylem}} = -0.180\text{ MPa}), making Ψxylem=−0.180 MPa\Psi_{\text{xylem}} = -0.180\text{ MPa}.

  3. Step 3

    Ψp=1.58 MPa\Psi_p = 1.58\text{ MPa}

    Correct

    Ψp,phloem=Ψxylem−Ψs,phloem=−0.180 MPa−(−1.5835 MPa)=+1.40 MPa\Psi_{p,\text{phloem}} = \Psi_{\text{xylem}} - \Psi_{s,\text{phloem}} = -0.180\text{ MPa} - (-1.5835\text{ MPa}) = +1.40\text{ MPa}

    Your final calculation followed from your assumption that Ψ=0 MPa\Psi = 0\text{ MPa}, propagating the equilibrium value error into your final turgor pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the van 't Hoff relation Ψs=−iCRT\Psi_s = -iCRT to determine the osmotic potential of the phloem sap.

You correctly recognized that total water potential is the sum of pressure potential and solute potential, Ψ=Ψp+Ψs\Psi = \Psi_p + \Psi_s.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium water potential reference error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that water equilibrium occurs at a default reference state of 0 MPa0\text{ MPa}, overlooking that transpirational pull places xylem sap under negative pressure (tension), setting the actual target equilibrium potential to Ψxylem=−0.180 MPa\Psi_{\text{xylem}} = -0.180\text{ MPa}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify surrounding tissue water potential
  • Equilibrium means Ψsource=Ψadjacent\Psi_{\text{source}} = \Psi_{\text{adjacent}}, not Ψ=0 MPa\Psi = 0\text{ MPa} unless the surrounding fluid is pure free water at atmospheric pressure.

  • Calculate the full water potential of the adjacent compartment first: Ψxylem=Ψp,xylem+Ψs,xylem\Psi_{\text{xylem}} = \Psi_{p,\text{xylem}} + \Psi_{s,\text{xylem}}.

Apply equilibrium condition
  • At osmotic equilibrium between adjacent compartments, set Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}}.

  • Substitute the combined Ψp+Ψs\Psi_p + \Psi_s for the cell and set it equal to the surrounding tissue's total Ψ\Psi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate xylem water potential: Ψxylem=Ψp,xylem+Ψs,xylem=−0.180 MPa+0 MPa=−0.180 MPa\Psi_{\text{xylem}} = \Psi_{p,\text{xylem}} + \Psi_{s,\text{xylem}} = -0.180\text{ MPa} + 0\text{ MPa} = -0.180\text{ MPa}.

  2. Set phloem potential equal to xylem potential at equilibrium: Ψp,phloem+Ψs,phloem=−0.180 MPa\Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}} = -0.180\text{ MPa}.

  3. Substitute Ψs,phloem=−1.5835 MPa\Psi_{s,\text{phloem}} = -1.5835\text{ MPa}: Ψp,phloem+(−1.5835 MPa)=−0.180 MPa\Psi_{p,\text{phloem}} + (-1.5835\text{ MPa}) = -0.180\text{ MPa}.

  4. Solve for turgor pressure: Ψp,phloem=−0.180 MPa+1.5835 MPa=+1.4035 MPa\Psi_{p,\text{phloem}} = -0.180\text{ MPa} + 1.5835\text{ MPa} = +1.4035\text{ MPa}.

Final answer

Ψp,phloem=+1.40 MPa\Psi_{p,\text{phloem}} = +1.40\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the full water potential equation for the neighboring compartment before equating potentials.

  • Double-check whether xylem pressure is negative (tension) or zero when calculating water movement in plants.

OverviewACEpath Teacher's Diagnosis

03 The student adds the xylem hydrostatic pressure instead of equating the total water potentials, adding -0.180 MPa to Ψs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψs=−iCRT=−(1.0)(0.650)(0.00831)(293.15)=−1.583 MPa\Psi_s = -iCRT = -(1.0)(0.650)(0.00831)(293.15) = -1.583\text{ MPa}

  2. Step 2

    Ψp=Ψs+Ψp,xylem  ⟹  Ψp=−1.583+(−0.180)=−1.76 MPa\Psi_p = \Psi_s + \Psi_{p,\text{xylem}} \implies \Psi_p = -1.583 + (-0.180) = -1.76\text{ MPa}

    Correct

    Ψphloem=Ψxylem  ⟹  Ψp,phloem+Ψs,phloem=Ψxylem  ⟹  Ψp,phloem=−0.180 MPa−(−1.5835 MPa)=+1.4035 MPa\Psi_{\text{phloem}} = \Psi_{\text{xylem}} \implies \Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}} = \Psi_{\text{xylem}} \implies \Psi_{p,\text{phloem}} = -0.180\text{ MPa} - (-1.5835\text{ MPa}) = +1.4035\text{ MPa}

    Water potential equilibrium requires setting the total water potentials equal: Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}}. Because Ψphloem=Ψp,phloem+Ψs,phloem\Psi_{\text{phloem}} = \Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}}, solving for turgor pressure requires subtracting Ψs,phloem\Psi_{s,\text{phloem}} from Ψxylem\Psi_{\text{xylem}}, giving Ψp,phloem=−0.180−(−1.5835)=+1.4035 MPa\Psi_{p,\text{phloem}} = -0.180 - (-1.5835) = +1.4035\text{ MPa} rather than adding them.

  3. Step 3

    Turgor pressure=1.76 MPa\text{Turgor pressure} = 1.76\text{ MPa}

    Correct

    Ψp,phloem=+1.40 MPa\Psi_{p,\text{phloem}} = +1.40\text{ MPa}

    Because of the addition error in the equilibrium relationship, your final value was off, and removing the negative sign manually did not fix the underlying setup error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the van 't Hoff formula Ψs=−iCRT\Psi_s = -iCRT using all appropriate units.

You accurately substituted the given temperature, gas constant, and concentration parameters to obtain Ψs=−1.583 MPa\Psi_s = -1.583\text{ MPa}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium equation setup error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated turgor pressure as a sum of solute potential and xylem pressure rather than setting total phloem water potential equal to total xylem water potential (Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}}) and solving for Ψp\Psi_p.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Equilibrium
  • Net water movement ceases when total water potentials are equal: Ψ1=Ψ2\Psi_1 = \Psi_2.

  • Always write down Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}} before expanding each side into Ψp+Ψs\Psi_p + \Psi_s.

Solve for Turgor Pressure
  • Ψp=Ψ−Ψs\Psi_p = \Psi - \Psi_s, where Ψs\Psi_s is intrinsically negative.

  • Subtract the negative solute potential from the total potential: Ψp=Ψequilibrium−Ψs\Psi_p = \Psi_{\text{equilibrium}} - \Psi_s.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the water potential equilibrium condition between xylem and phloem: Ψphloem=Ψxylem\Psi_{\text{phloem}} = \Psi_{\text{xylem}}.

  2. Expand both sides: Ψp,phloem+Ψs,phloem=Ψp,xylem+Ψs,xylem=−0.180 MPa+0 MPa=−0.180 MPa\Psi_{p,\text{phloem}} + \Psi_{s,\text{phloem}} = \Psi_{p,\text{xylem}} + \Psi_{s,\text{xylem}} = -0.180\text{ MPa} + 0\text{ MPa} = -0.180\text{ MPa}.

  3. Rearrange to solve for Ψp,phloem\Psi_{p,\text{phloem}}: Ψp,phloem=Ψxylem−Ψs,phloem=−0.180 MPa−(−1.5835 MPa)=+1.4035 MPa\Psi_{p,\text{phloem}} = \Psi_{\text{xylem}} - \Psi_{s,\text{phloem}} = -0.180\text{ MPa} - (-1.5835\text{ MPa}) = +1.4035\text{ MPa}.

Final answer

Ψp,phloem=+1.40 MPa\Psi_{p,\text{phloem}} = +1.40\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing out the full total water potential equation Ψ=Ψp+Ψs\Psi = \Psi_p + \Psi_s for both compartments before rearranging.

  • Check that positive turgor pressure naturally arises from subtracting a large negative solute potential: −(−∣Ψs∣)=+∣Ψs∣-(-|\Psi_s|) = +|\Psi_s|.

Lock it in

Similar question

01

A parenchyma cell contains 0.300 M0.300\text{ M} glucose (i=1.0i = 1.0) at 25∘C25^\circ\text{C} (298.15 K298.15\text{ K}, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})). Calculate the solute potential (Ψs\Psi_s) of this cell to three significant figures.

Answer

Ψs=−iCRT=−(1.0)(0.300 mol/L)(0.00831 L⋅MPa/(mol⋅K))(298.15 K)=−0.743 MPa\Psi_s = -iCRT = -(1.0)(0.300\text{ mol/L})(0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}))(298.15\text{ K}) = -0.743\text{ MPa}.

02

A phloem sieve tube has an internal solute potential of Ψs,phloem=−1.85 MPa\Psi_{s,\text{phloem}} = -1.85\text{ MPa}. It is in water potential equilibrium with an adjacent xylem vessel where Ψp,xylem=−0.25 MPa\Psi_{p,\text{xylem}} = -0.25\text{ MPa} and Ψs,xylem=0 MPa\Psi_{s,\text{xylem}} = 0\text{ MPa}. What is the hydrostatic turgor pressure (Ψp,phloem\Psi_{p,\text{phloem}}) inside the phloem?

Answer

Ψxylem=−0.25 MPa+0=−0.25 MPa\Psi_{\text{xylem}} = -0.25\text{ MPa} + 0 = -0.25\text{ MPa}. At equilibrium, Ψphloem=Ψxylem  ⟹  Ψp,phloem+(−1.85 MPa)=−0.25 MPa\Psi_{\text{phloem}} = \Psi_{\text{xylem}} \implies \Psi_{p,\text{phloem}} + (-1.85\text{ MPa}) = -0.25\text{ MPa}. Thus, Ψp,phloem=−0.25−(−1.85)=+1.60 MPa\Psi_{p,\text{phloem}} = -0.25 - (-1.85) = +1.60\text{ MPa}.

03

At a sink tissue, sucrose unloading reduces the internal sieve-tube concentration to 0.200 M0.200\text{ M} (i=1.0i = 1.0) at 20∘C20^\circ\text{C} (293.15 K293.15\text{ K}, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})). Adjacent xylem has a total water potential of Ψxylem=−0.100 MPa\Psi_{\text{xylem}} = -0.100\text{ MPa}. Assuming full osmotic equilibrium, determine the sink turgor pressure (Ψp\Psi_p). Compare this to a source turgor pressure of +1.40 MPa+1.40\text{ MPa} to explain the direction of bulk flow.

Answer

Ψs,sink=−(1.0)(0.200)(0.00831)(293.15)≈−0.487 MPa\Psi_{s,\text{sink}} = -(1.0)(0.200)(0.00831)(293.15) \approx -0.487\text{ MPa}. At equilibrium, Ψp,sink=Ψxylem−Ψs,sink=−0.100−(−0.487)=+0.387 MPa\Psi_{p,\text{sink}} = \Psi_{\text{xylem}} - \Psi_{s,\text{sink}} = -0.100 - (-0.487) = +0.387\text{ MPa}. Because Ψp,source(+1.40 MPa)>Ψp,sink(+0.387 MPa)\Psi_{p,\text{source}} (+1.40\text{ MPa}) > \Psi_{p,\text{sink}} (+0.387\text{ MPa}), the resulting positive hydrostatic pressure gradient drives mass flow of sap from source to sink.

Loading workspace…