Resources

A continuous mammalian cell culture running in a bioreactor switches abruptly from an aerobic state to an anaerobic state. The bioreactor maintains a constant cellular ATP\text{ATP} consumption rate of 1.80×10−4 mol ATP⋅min−11.80\times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}. Under aerobic conditions, complete glucose oxidation yields 30.0 mol ATP/mol glucose30.0\text{ mol ATP/mol glucose}. Under anaerobic conditions, homolactic fermentation produces only 2.00 mol ATP/mol glucose2.00\text{ mol ATP/mol glucose}. To maintain energy homeostasis and avoid energetic collapse (a phenomenon known as the Pasteur effect), calculate: (a) the required glucose consumption rate (in mol glucose⋅min−1\text{mol glucose}\cdot\text{min}^{-1}) under aerobic conditions, (b) the required glucose consumption rate (in mol glucose⋅min−1\text{mol glucose}\cdot\text{min}^{-1}) under anaerobic conditions, and (c) the fold-increase in glucose consumption rate when transitioning from aerobic to anaerobic metabolism.

Answer and steps

Final answer

(a) 6.00×10−6 mol⋅min−16.00\times 10^{-6}\text{ mol}\cdot\text{min}^{-1}, (b) 9.00×10−5 mol⋅min−19.00\times 10^{-5}\text{ mol}\cdot\text{min}^{-1}, (c) 15.0-fold increase15.0\text{-fold increase}

Steps

To maintain a constant rate of cellular ATP\text{ATP} consumption, the rate at which glucose must be metabolized depends inversely on the ATP\text{ATP} yield per mole of glucose:

Glucose consumption rate=ATP consumption rateATP yield per mole of glucose\text{Glucose consumption rate} = \frac{\text{ATP consumption rate}}{\text{ATP yield per mole of glucose}}

Part (a): Aerobic Glucose Consumption Rate

Under aerobic conditions, complete oxidation of glucose provides a high yield of 30.0 mol ATP/mol glucose30.0\text{ mol ATP/mol glucose}.

Using the constant ATP\text{ATP} requirement of 1.80×10−4 mol ATP⋅min−11.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}:

rglc, aerobic=1.80×10−4 mol ATP⋅min−130.0 mol ATP⋅mol glucose−1=6.00×10−6 mol glucose⋅min−1r_{\text{glc, aerobic}} = \frac{1.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}}{30.0\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}

Part (b): Anaerobic Glucose Consumption Rate

Under anaerobic conditions, respiration shifts to homolactic fermentation, generating only 2.00 mol ATP/mol glucose2.00\text{ mol ATP/mol glucose} through substrate-level phosphorylation in glycolysis:

rglc, anaerobic=1.80×10−4 mol ATP⋅min−12.00 mol ATP⋅mol glucose−1=9.00×10−5 mol glucose⋅min−1r_{\text{glc, anaerobic}} = \frac{1.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}}{2.00\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}

Part (c): Fold-Increase in Glucose Consumption Rate

The fold-increase in glucose consumption rate reflects the Pasteur effect, where cells sharply accelerate glycolysis to compensate for the lower efficiency of anaerobic ATP\text{ATP} production:

Fold-increase=rglc, anaerobicrglc, aerobic=9.00×10−5 mol⋅min−16.00×10−6 mol⋅min−1=15.0\text{Fold-increase} = \frac{r_{\text{glc, anaerobic}}}{r_{\text{glc, aerobic}}} = \frac{9.00 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol}\cdot\text{min}^{-1}} = 15.0

Alternatively, since the required ATP\text{ATP} rate is constant, the ratio can be directly computed from the inverse ratio of the yields:

YaerobicYanaerobic=30.0 mol ATP/mol glucose2.00 mol ATP/mol glucose=15.0-fold increase\frac{Y_{\text{aerobic}}}{Y_{\text{anaerobic}}} = \frac{30.0\text{ mol ATP/mol glucose}}{2.00\text{ mol ATP/mol glucose}} = 15.0\text{-fold increase}

(Common Pitfall: Do not confuse ATP\text{ATP} production efficiency with glucose consumption rate. Because anaerobic metabolism yields 115\frac{1}{15} as much ATP\text{ATP} per glucose molecule, the cell must consume 1515 times more glucose to meet the same energetic demand.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies the ATP consumption rate by the ATP yield per glucose instead of dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Rate_glucose=(1.80×10−4)×30.0=5.40×10−3 mol glucose⋅min−1\text{Rate\_glucose} = (1.80 \times 10^{-4}) \times 30.0 = 5.40 \times 10^{-3}\text{ mol glucose}\cdot\text{min}^{-1}

    Correct

    rglc, aerobic=1.80×10−4 mol ATP⋅min−130.0 mol ATP⋅mol glucose−1=6.00×10−6 mol glucose⋅min−1r_{\text{glc, aerobic}} = \frac{1.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}}{30.0\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}

    You multiplied the ATP demand by the yield rather than dividing. Since each mole of glucose yields 30.0 mol ATP30.0\text{ mol ATP}, dividing the ATP consumption rate by the yield gives the required glucose consumption rate.

  2. Step 2

    Rate_glucose=(1.80×10−4)×2.00=3.60×10−4 mol glucose⋅min−1\text{Rate\_glucose} = (1.80 \times 10^{-4}) \times 2.00 = 3.60 \times 10^{-4}\text{ mol glucose}\cdot\text{min}^{-1}

    Correct

    rglc, anaerobic=1.80×10−4 mol ATP⋅min−12.00 mol ATP⋅mol glucose−1=9.00×10−5 mol glucose⋅min−1r_{\text{glc, anaerobic}} = \frac{1.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}}{2.00\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}

    You repeated the multiplication error for anaerobic respiration. Dividing 1.80×10−4 mol ATP⋅min−11.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1} by 2.00 mol ATP⋅mol glucose−12.00\text{ mol ATP}\cdot\text{mol glucose}^{-1} yields 9.00×10−5 mol glucose⋅min−19.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}.

  3. Step 3

    Fold-increase=3.60×10−45.40×10−3=0.0667\text{Fold-increase} = \frac{3.60 \times 10^{-4}}{5.40 \times 10^{-3}} = 0.0667

    Correct

    Fold-increase=9.00×10−5 mol glucose⋅min−16.00×10−6 mol glucose⋅min−1=15.0\text{Fold-increase} = \frac{9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}} = 15.0

    You correctly set up the fold-increase ratio as anaerobic rate divided by aerobic rate, but using your inverted rates yielded a fractional value (0.06670.0667, or 115\frac{1}{15}) instead of a fold-increase (15.015.0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the fold-change comparison as the ratio of anaerobic glucose consumption to aerobic glucose consumption.

You clearly wrote out unit labels and maintained consistent scientific notation across all steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Analysis & Rate Inversion

You multiplied rather than divided by the ATP yield per mole of glucose, resulting in units of mol2 ATP/(mol glucose⋅min)\text{mol}^2\text{ ATP}/(\text{mol glucose}\cdot\text{min}) rather than mol glucose/min\text{mol glucose}/\text{min}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused total ATP output with substrate demand: when ATP yield per substrate molecule drops, substrate consumption must increase proportionally to sustain a constant ATP supply rate.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Verification
  • Substrate Rate (mol substrate/min)=Product Rate (mol ATP/min)Yield (mol ATP/mol substrate)\text{Substrate Rate } (\text{mol substrate}/\text{min}) = \frac{\text{Product Rate } (\text{mol ATP}/\text{min})}{\text{Yield } (\text{mol ATP}/\text{mol substrate})}

  • Always write out and cancel the units: mol ATPmin÷mol ATPmol glucose=mol glucosemin\frac{\text{mol ATP}}{\text{min}} \div \frac{\text{mol ATP}}{\text{mol glucose}} = \frac{\text{mol glucose}}{\text{min}}.

Pasteur Effect Sanity Check
  • When shifting from high-efficiency aerobic respiration to low-efficiency fermentation, glucose consumption must increase (fold-increase >1> 1).

  • If your calculated anaerobic rate is lower than your aerobic rate, check whether you inverted the yield factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the constant cellular ATP demand by the aerobic yield: rglc, aerobic=1.80×10−4 mol ATP⋅min−130.0 mol ATP⋅mol glucose−1=6.00×10−6 mol glucose⋅min−1r_{\text{glc, aerobic}} = \frac{1.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}}{30.0\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}.

  2. Divide the constant cellular ATP demand by the anaerobic yield: rglc, anaerobic=1.80×10−4 mol ATP⋅min−12.00 mol ATP⋅mol glucose−1=9.00×10−5 mol glucose⋅min−1r_{\text{glc, anaerobic}} = \frac{1.80 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}}{2.00\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}.

  3. Calculate the fold-increase by dividing the anaerobic rate by the aerobic rate: 9.00×10−5 mol glucose⋅min−16.00×10−6 mol glucose⋅min−1=15.0\frac{9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}} = 15.0.

Final answer

(a) 6.00×10−6 mol⋅min−16.00 \times 10^{-6}\text{ mol}\cdot\text{min}^{-1}, (b) 9.00×10−5 mol⋅min−19.00 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}, (c) 15.0-fold increase15.0\text{-fold increase}

NEXT STEPS
Final Takeaways from Your Teacher
  • Track units explicitly when converting between metabolite fluxes and energy yields to ensure unwanted units cancel out.

  • Remember that the Pasteur effect requires cells to burn significantly more glucose per unit time when deprived of oxygen.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio for fold-increase by dividing the aerobic rate by the anaerobic rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rate_glucose=1.80×10−430.0=6.00×10−6 mol glucose⋅min−1\text{Rate\_glucose} = \frac{1.80 \times 10^{-4}}{30.0} = 6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}

  2. Step 2

    Rate_glucose=1.80×10−42.00=9.00×10−5 mol glucose⋅min−1\text{Rate\_glucose} = \frac{1.80 \times 10^{-4}}{2.00} = 9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}

  3. Step 3

    Fold-increase=6.00×10−69.00×10−5=0.0667\text{Fold-increase} = \frac{6.00 \times 10^{-6}}{9.00 \times 10^{-5}} = 0.0667

    Correct

    Fold-increase=rglc, anaerobicrglc, aerobic=9.00×10−5 mol⋅min−16.00×10−6 mol⋅min−1=15.0\text{Fold-increase} = \frac{r_{\text{glc, anaerobic}}}{r_{\text{glc, aerobic}}} = \frac{9.00 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol}\cdot\text{min}^{-1}} = 15.0

    You inverted the fold-increase ratio. A fold-increase represents final rateinitial rate\frac{\text{final rate}}{\text{initial rate}} (or anaerobicaerobic\frac{\text{anaerobic}}{\text{aerobic}}), which must be greater than 11 since the rate increased.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related glucose consumption rate to ATP demand and individual pathway yields.

You performed the unit division accurately for both aerobic and anaerobic conditions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio in fold-change calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the direction of fold-change by calculating initialfinal\frac{\text{initial}}{\text{final}} instead of finalinitial\frac{\text{final}}{\text{initial}}, or by confusing the ratio of ATP yields (1515 to 11) with the ratio of glucose rates.

REASONING PATH
Your ACEpath teacher’s suggested approach
Defining Fold-Change vs. Fold-Increase
  • When transitioning from state AA to state BB, the fold-change in consumption is RateBRateA\frac{\text{Rate}_B}{\text{Rate}_A}. An increase must yield a value greater than 11.

  • Always verify that an 'increase' results in a ratio >1> 1 by placing the larger, final rate in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the fold-increase ratio as rglc, anaerobicrglc, aerobic\frac{r_{\text{glc, anaerobic}}}{r_{\text{glc, aerobic}}}.

  2. Substitute the calculated rates: 9.00×10−5 mol glucose⋅min−16.00×10−6 mol glucose⋅min−1=15.0\frac{9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}} = 15.0.

Final answer

(a) 6.00×10−6 mol⋅min−16.00\times 10^{-6}\text{ mol}\cdot\text{min}^{-1}, (b) 9.00×10−5 mol⋅min−19.00\times 10^{-5}\text{ mol}\cdot\text{min}^{-1}, (c) 15.0-fold increase15.0\text{-fold increase}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check that any calculated 'fold-increase' evaluates to a number strictly greater than 11.

  • Remember that lower ATP yield per glucose directly forces a proportionally higher glucose consumption rate to maintain energy homeostasis.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the absolute difference between the rates rather than the relative fold-increase.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rate_glucose=1.80×10−430.0=6.00×10−6 mol glucose⋅min−1\text{Rate\_glucose} = \frac{1.80 \times 10^{-4}}{30.0} = 6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}

  2. Step 2

    Rate_glucose=1.80×10−42.00=9.00×10−5 mol glucose⋅min−1\text{Rate\_glucose} = \frac{1.80 \times 10^{-4}}{2.00} = 9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}

  3. Step 3

    Increase=9.00×10−5−6.00×10−6=8.40×10−5 mol glucose⋅min−1\text{Increase} = 9.00 \times 10^{-5} - 6.00 \times 10^{-6} = 8.40 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}

    Correct

    Fold-increase=rglc, anaerobicrglc, aerobic=9.00×10−5 mol⋅min−16.00×10−6 mol⋅min−1=15.0\text{Fold-increase} = \frac{r_{\text{glc, anaerobic}}}{r_{\text{glc, aerobic}}} = \frac{9.00 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol}\cdot\text{min}^{-1}} = 15.0

    You calculated the net absolute difference (ranaerobic−raerobicr_{\text{anaerobic}} - r_{\text{aerobic}}) rather than the fold-increase. A fold-increase is a dimensionless ratio comparing the new rate to the baseline rate: ranaerobicraerobic\frac{r_{\text{anaerobic}}}{r_{\text{aerobic}}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the ATP consumption rate to the stoichiometric ATP yield per mole of glucose.

You accurately computed the aerobic glucose requirement as 6.00×10−6 mol glucose⋅min−16.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}.

You accurately computed the anaerobic glucose requirement as 9.00×10−5 mol glucose⋅min−19.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Difference vs Fold-Increase Confusion

You subtracted the aerobic rate from the anaerobic rate instead of dividing the anaerobic rate by the aerobic rate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an absolute change (subtraction with dimensional units) with a relative or fold-change (ratio representing a dimensionless multiplier).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fold-Change vs. Absolute Change
  • An 'absolute change' is B−AB - A (retains units), whereas an 'nn-fold increase' or 'fold-change' is BA\frac{B}{A} (a dimensionless multiplier).

  • Whenever a question asks for a 'fold-increase' or 'fold-change', compute the quotient final valueinitial value\frac{\text{final value}}{\text{initial value}} rather than subtracting.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that 'fold-increase' signifies the multiplicative factor: Fold-increase=rglc, anaerobicrglc, aerobic\text{Fold-increase} = \frac{r_{\text{glc, anaerobic}}}{r_{\text{glc, aerobic}}}.

  2. Substitute the calculated rates: 9.00×10−5 mol glucose⋅min−16.00×10−6 mol glucose⋅min−1=15.0\frac{9.00 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}}{6.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}} = 15.0.

Final answer

(a) 6.00×10−6 mol⋅min−16.00\times 10^{-6}\text{ mol}\cdot\text{min}^{-1}, (b) 9.00×10−5 mol⋅min−19.00\times 10^{-5}\text{ mol}\cdot\text{min}^{-1}, (c) 15.0-fold increase15.0\text{-fold increase}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between 'absolute change' (difference: B−AB - A) and 'fold-change' (ratio: B/AB / A).

  • Practice computing fold-changes across metabolic transitions where energetic demand remains constant.

Lock it in

Similar question

01

A yeast culture consumes ATP at a steady rate of 4.80×10−5 mol ATP⋅min−14.80 \times 10^{-5}\text{ mol ATP}\cdot\text{min}^{-1}. Under aerobic conditions, it generates 32.0 mol ATP/mol glucose32.0\text{ mol ATP/mol glucose}. Calculate the required aerobic glucose consumption rate in mol glucose⋅min−1\text{mol glucose}\cdot\text{min}^{-1}.

Answer

1.50×10−6 mol glucose⋅min−11.50 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}. Divide ATP rate by aerobic yield: 4.80×10−5 mol ATP⋅min−132.0 mol ATP/mol glucose=1.50×10−6 mol glucose⋅min−1\frac{4.80 \times 10^{-5}\text{ mol ATP}\cdot\text{min}^{-1}}{32.0\text{ mol ATP/mol glucose}} = 1.50 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}.

02

In the same yeast culture consuming 4.80×10−5 mol ATP⋅min−14.80 \times 10^{-5}\text{ mol ATP}\cdot\text{min}^{-1}, oxygen is depleted, switching metabolism to ethanol fermentation yielding 2.00 mol ATP/mol glucose2.00\text{ mol ATP/mol glucose}. (a) Find the anaerobic glucose consumption rate. (b) Determine the fold-increase in glucose consumption rate compared to the aerobic rate of 1.50×10−6 mol glucose⋅min−11.50 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}.

Answer

(a) 2.40×10−5 mol glucose⋅min−12.40 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}; (b) 16.0-fold increase16.0\text{-fold increase}. Key steps: (a) 4.80×10−52.00=2.40×10−5 mol⋅min−1\frac{4.80 \times 10^{-5}}{2.00} = 2.40 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}. (b) 2.40×10−51.50×10−6=16.0\frac{2.40 \times 10^{-5}}{1.50 \times 10^{-6}} = 16.0 (or directly 32.02.00=16.0\frac{32.0}{2.00} = 16.0).

03

A mutant cell line relies on aerobic respiration yielding 30.0 mol ATP/mol glucose30.0\text{ mol ATP/mol glucose} and consumes 4.00×10−6 mol glucose⋅min−14.00 \times 10^{-6}\text{ mol glucose}\cdot\text{min}^{-1}. When treated with an inhibitor that forces anaerobic glycolysis yielding 2.00 mol ATP/mol glucose2.00\text{ mol ATP/mol glucose}, its ATP consumption rate drops by 25%25\%. What is the new glucose consumption rate in mol glucose⋅min−1\text{mol glucose}\cdot\text{min}^{-1}?

Answer

4.50×10−5 mol glucose⋅min−14.50 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}. Key steps: Initial ATP rate =4.00×10−6×30.0=1.20×10−4 mol ATP⋅min−1= 4.00 \times 10^{-6} \times 30.0 = 1.20 \times 10^{-4}\text{ mol ATP}\cdot\text{min}^{-1}. Reduced ATP rate =1.20×10−4×0.75=9.00×10−5 mol ATP⋅min−1= 1.20 \times 10^{-4} \times 0.75 = 9.00 \times 10^{-5}\text{ mol ATP}\cdot\text{min}^{-1}. New glucose rate =9.00×10−52.00=4.50×10−5 mol glucose⋅min−1= \frac{9.00 \times 10^{-5}}{2.00} = 4.50 \times 10^{-5}\text{ mol glucose}\cdot\text{min}^{-1}.

Loading workspace…