Resources

An aquatic biologist samples a freshwater reservoir covering a surface area of 8.50 km28.50\text{ km}^2 with a uniform epilimnion depth of 4.00 m4.00\text{ m}. To quantify the population density and standing stock of the cladoceran zooplankter Daphnia magna, the biologist collects 2525 vertical plankton net tows. The net has a circular mouth diameter of 30.0 cm30.0\text{ cm} and is hauled vertically through the entire 4.00 m4.00\text{ m} water column (filtration efficiency =100%= 100\%, net volume V=πr2hV = \pi r^2 h). Across all 2525 net tows, a total of 3,1803{,}180 Daphnia individuals are collected. (a) Calculate the volume of water filtered by a single net tow in cubic meters (m3\text{m}^3) and liters (L\text{L}), where 1 m3=1,000 L1\text{ m}^3 = 1{,}000\text{ L}. (b) Determine the mean concentration of Daphnia in units of individuals/L\text{individuals/L}. (c) Estimate the total population abundance (NN) of Daphnia residing in the reservoir epilimnion.

Answer and steps

Final answer

(a) V=0.283 m3=283 LV = 0.283\text{ m}^3 = 283\text{ L}; (b) 0.450 individuals/L0.450\text{ individuals/L}; (c) N=1.53×1010 individualsN = 1.53 \times 10^{10}\text{ individuals}

Steps

Part (a): Volume of Water Filtered per Net Tow

Each vertical plankton tow samples a cylindrical column of water defined by the circular opening of the net and the depth of the haul.

  1. Find the net mouth radius (rr): The diameter is given as 30.0 cm=0.300 m30.0\text{ cm} = 0.300\text{ m}. r=d2=0.300 m2=0.150 mr = \frac{d}{2} = \frac{0.300\text{ m}}{2} = 0.150\text{ m}
  2. Calculate the volume of a single tow (VtowV_{\text{tow}}): Using the formula for the volume of a cylinder V=πr2hV = \pi r^2 h with depth h=4.00 mh = 4.00\text{ m}: Vtow=π(0.150 m)2(4.00 m)=π(0.0225 m2)(4.00 m)=0.0900π m3≈0.28274 m3V_{\text{tow}} = \pi (0.150\text{ m})^2 (4.00\text{ m}) = \pi (0.0225\text{ m}^2)(4.00\text{ m}) = 0.0900\pi\text{ m}^3 \approx 0.28274\text{ m}^3

    Rounding to three significant figures gives: Vtow≈0.283 m3V_{\text{tow}} \approx 0.283\text{ m}^3

  3. Convert to liters (L\text{L}): Since 1 m3=1,000 L1\text{ m}^3 = 1{,}000\text{ L}: Vtow=0.28274 m3×1,000 L/m3≈283 LV_{\text{tow}} = 0.28274\text{ m}^3 \times 1{,}000\text{ L/m}^3 \approx 283\text{ L}

Part (b): Mean Concentration of Daphnia

  1. Calculate the total volume filtered across all tows: Vtotal=25×Vtow=25×282.74 L≈7,068.58 LV_{\text{total}} = 25 \times V_{\text{tow}} = 25 \times 282.74\text{ L} \approx 7{,}068.58\text{ L}
  2. Compute the mean density: A total of 3,180 individuals3{,}180\text{ individuals} were captured across this total volume: Density=Total Individuals CapturedVtotal=3,180 individuals7,068.58 L≈0.44988 individuals/L\text{Density} = \frac{\text{Total Individuals Captured}}{V_{\text{total}}} = \frac{3{,}180\text{ individuals}}{7{,}068.58\text{ L}} \approx 0.44988\text{ individuals/L}

    Rounding to three significant figures gives: Density≈0.450 individuals/L\text{Density} \approx 0.450\text{ individuals/L}


Part (c): Total Reservoir Abundance (NN)

To find the total population of Daphnia (NN) in the entire reservoir epilimnion, scale the mean density by the total epilimnion volume.

  1. Calculate the total volume of the epilimnion (VresV_{\text{res}}):

    • Surface area: A=8.50 km2=8.50×(103 m)2=8.50×106 m2A = 8.50\text{ km}^2 = 8.50 \times (10^3\text{ m})^2 = 8.50 \times 10^6\text{ m}^2
    • Depth: h=4.00 mh = 4.00\text{ m} Vres=A×h=(8.50×106 m2)(4.00 m)=3.40×107 m3V_{\text{res}} = A \times h = (8.50 \times 10^6\text{ m}^2)(4.00\text{ m}) = 3.40 \times 10^7\text{ m}^3
  2. Convert the reservoir volume to liters: Vres=3.40×107 m3×1,000 L/m3=3.40×1010 LV_{\text{res}} = 3.40 \times 10^7\text{ m}^3 \times 1{,}000\text{ L/m}^3 = 3.40 \times 10^{10}\text{ L}
  3. Estimate total abundance (NN): N=Density×Vres=(0.44988 individuals/L)×(3.40×1010 L)≈1.5296×1010 individualsN = \text{Density} \times V_{\text{res}} = (0.44988\text{ individuals/L}) \times (3.40 \times 10^{10}\text{ L}) \approx 1.5296 \times 10^{10}\text{ individuals}

    Rounding to three significant figures gives: N≈1.53×1010 individualsN \approx 1.53 \times 10^{10}\text{ individuals}

Common Pitfall: When converting surface area from km2\text{km}^2 to m2\text{m}^2, remember that 1 km2=(1,000 m)2=106 m21\text{ km}^2 = (1{,}000\text{ m})^2 = 10^6\text{ m}^2, not 103 m210^3\text{ m}^2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the diameter instead of the radius in the cylinder volume formula, overestimating the filtered volume by a factor of 4 and underestimating both concentration and population size.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    d=30.0 cm=0.300 m  ⟹  V=π×(0.300 m)2×4.00 m=1.131 m3  ⟹  V=1.131 m3×1,000 L/m3=1,131 Ld = 30.0\text{ cm} = 0.300\text{ m} \implies V = \pi \times (0.300\text{ m})^2 \times 4.00\text{ m} = 1.131\text{ m}^3 \implies V = 1.131\text{ m}^3 \times 1{,}000\text{ L/m}^3 = 1{,}131\text{ L}

    Correct

    r=d2=0.150 m  ⟹  V=π(0.150 m)2(4.00 m)≈0.283 m3=283 Lr = \frac{d}{2} = 0.150\text{ m} \implies V = \pi (0.150\text{ m})^2 (4.00\text{ m}) \approx 0.283\text{ m}^3 = 283\text{ L}

    You used the diameter 0.300 m0.300\text{ m} directly in place of the radius rr in V=πr2hV = \pi r^2 h. Because r=d2=0.150 mr = \frac{d}{2} = 0.150\text{ m}, squaring the diameter overestimated the tow volume by a factor of 22=42^2 = 4.

  2. Step 2

    Total volume=25×1,131 L=28,275 L  ⟹  Concentration=3,18028,275 L=0.112 individuals/L\text{Total volume} = 25 \times 1{,}131\text{ L} = 28{,}275\text{ L} \implies \text{Concentration} = \frac{3{,}180}{28{,}275\text{ L}} = 0.112\text{ individuals/L}

    Correct

    Vtotal=25×282.74 L≈7,068.6 L  ⟹  Concentration=3,180 individuals7,068.6 L≈0.450 individuals/LV_{\text{total}} = 25 \times 282.74\text{ L} \approx 7{,}068.6\text{ L} \implies \text{Concentration} = \frac{3{,}180\text{ individuals}}{7{,}068.6\text{ L}} \approx 0.450\text{ individuals/L}

    Your method of multiplying the single tow volume by 2525 and dividing total count by total volume was completely correct, but the result was affected by the inflated tow volume from part (a).

  3. Step 3

    Vepi=8.50×106 m2×4.00 m=3.40×107 m3=3.40×1010 L  ⟹  N=0.112 individuals/L×3.40×1010 L=3.81×109 individualsV_{\text{epi}} = 8.50 \times 10^6\text{ m}^2 \times 4.00\text{ m} = 3.40 \times 10^7\text{ m}^3 = 3.40 \times 10^{10}\text{ L} \implies N = 0.112\text{ individuals/L} \times 3.40 \times 10^{10}\text{ L} = 3.81 \times 10^9\text{ individuals}

    Correct

    Vepi=3.40×1010 L  ⟹  N=0.44988 individuals/L×3.40×1010 L≈1.53×1010 individualsV_{\text{epi}} = 3.40 \times 10^{10}\text{ L} \implies N = 0.44988\text{ individuals/L} \times 3.40 \times 10^{10}\text{ L} \approx 1.53 \times 10^{10}\text{ individuals}

    You correctly converted 8.50 km28.50\text{ km}^2 to 8.50×106 m28.50 \times 10^6\text{ m}^2 and found the total epilimnion volume of 3.40×1010 L3.40 \times 10^{10}\text{ L}. The final population size was lower than expected only because of the propagated concentration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted centimeters to meters and cubic meters to liters.

You correctly converted the reservoir surface area from km2\text{km}^2 to m2\text{m}^2 using 1 km2=106 m21\text{ km}^2 = 10^6\text{ m}^2.

You structured the multi-step sampling workflow logically from sample concentration to total reservoir population.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Diameter substituted for radius in cylinder volume

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the circular mouth diameter dd directly into the cylinder volume formula V=πr2hV = \pi r^2 h without dividing by 22 to find the radius rr.

REASONING PATH
Your ACEpath teacher’s suggested approach
Radius vs. Diameter in Volume Formulas
  • A cylinder's volume is V=πr2h=π(d2)2h=πd2h4V = \pi r^2 h = \pi \left(\frac{d}{2}\right)^2 h = \frac{\pi d^2 h}{4}.

  • Whenever a circular aperture diameter is given, immediately calculate and record r=d2r = \frac{d}{2} before substituting into any area or volume formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the net mouth radius: r=0.300 m2=0.150 mr = \frac{0.300\text{ m}}{2} = 0.150\text{ m}.

  2. Calculate the single-tow volume: Vtow=π(0.150 m)2(4.00 m)≈0.2827 m3=282.7 LV_{\text{tow}} = \pi (0.150\text{ m})^2 (4.00\text{ m}) \approx 0.2827\text{ m}^3 = 282.7\text{ L} (rounded to 0.283 m3=283 L0.283\text{ m}^3 = 283\text{ L}).

  3. Find total volume sampled across 2525 tows: Vtotal=25×282.74 L≈7,068.6 LV_{\text{total}} = 25 \times 282.74\text{ L} \approx 7{,}068.6\text{ L}.

  4. Compute mean concentration: Density=3,180 individuals7,068.6 L≈0.450 individuals/L\text{Density} = \frac{3{,}180\text{ individuals}}{7{,}068.6\text{ L}} \approx 0.450\text{ individuals/L}.

  5. Multiply by the epilimnion volume (3.40×1010 L3.40 \times 10^{10}\text{ L}): N=0.44988 individuals/L×3.40×1010 L≈1.53×1010 individualsN = 0.44988\text{ individuals/L} \times 3.40 \times 10^{10}\text{ L} \approx 1.53 \times 10^{10}\text{ individuals}.

Final answer

(a) V=0.283 m3=283 LV = 0.283\text{ m}^3 = 283\text{ L}; (b) 0.450 individuals/L0.450\text{ individuals/L}; (c) N=1.53×1010 individualsN = 1.53 \times 10^{10}\text{ individuals}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether a geometry problem provides diameter (dd) or radius (rr) before squaring.

  • Practice spotting error propagation by recalculating dependent quantities whenever an initial base variable is updated.

OverviewACEpath Teacher's Diagnosis

02 The student divides the total individuals by the volume of a single tow instead of the cumulative volume of all 25 tows, overestimating concentration and total abundance by a factor of 25.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=15.0 cm=0.150 m  ⟹  V=π×(0.150 m)2×4.00 m=0.283 m3  ⟹  V=0.283 m3×1,000 L/m3=283 Lr = 15.0\text{ cm} = 0.150\text{ m} \implies V = \pi \times (0.150\text{ m})^2 \times 4.00\text{ m} = 0.283\text{ m}^3 \implies V = 0.283\text{ m}^3 \times 1{,}000\text{ L/m}^3 = 283\text{ L}

  2. Step 2

    Concentration=3,180 individuals/283 L=11.24 individuals/L\text{Concentration} = 3{,}180\text{ individuals} / 283\text{ L} = 11.24\text{ individuals/L}

    Correct

    Concentration=3,180 individuals25×282.74 L≈0.450 individuals/L\text{Concentration} = \frac{3{,}180\text{ individuals}}{25 \times 282.74\text{ L}} \approx 0.450\text{ individuals/L}

    The 3,1803{,}180 organisms were collected across all 2525 vertical tows combined. To find the concentration, you need to divide by the total volume sampled (25×283 L=7,075 L25 \times 283\text{ L} = 7{,}075\text{ L}), rather than the volume of just one tow.

  3. Step 3

    Vepi=8.50×106 m2×4.00 m=3.40×107 m3=3.40×1010 L  ⟹  N=11.24 individuals/L×3.40×1010 L=3.82×1011 individualsV_{\text{epi}} = 8.50 \times 10^6\text{ m}^2 \times 4.00\text{ m} = 3.40 \times 10^7\text{ m}^3 = 3.40 \times 10^{10}\text{ L} \implies N = 11.24\text{ individuals/L} \times 3.40 \times 10^{10}\text{ L} = 3.82 \times 10^{11}\text{ individuals}

    Correct

    N=(0.4499 individuals/L)×(3.40×1010 L)≈1.53×1010 individualsN = (0.4499\text{ individuals/L}) \times (3.40 \times 10^{10}\text{ L}) \approx 1.53 \times 10^{10}\text{ individuals}

    Your area unit conversion and total reservoir epilimnion volume calculation were completely accurate. The final abundance value was off solely because it carried forward the concentration error from Part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the diameter of the plankton net mouth to radius and computed the cylinder volume.

You converted units accurately between cubic meters and liters using the 1,000 L/m31{,}000\text{ L/m}^3 conversion factor.

You correctly converted the surface area from km2\text{km}^2 to m2\text{m}^2 and calculated the total epilimnion volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sample Volume Scaling Omission

You divided the pooled catch from 25 tows by the volume of a single tow instead of the cumulative volume filtered.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the total sampling effort when pooling repeated replicate samples: when aggregate counts from multiple replicates are used in the numerator, the denominator must represent the sum of all replicate volumes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match numerator and denominator sample effort
  • Density=∑individuals captured∑volume sampled=Total individualsntows×Vtow\text{Density} = \frac{\sum \text{individuals captured}}{\sum \text{volume sampled}} = \frac{\text{Total individuals}}{n_{\text{tows}} \times V_{\text{tow}}}

  • Always multiply the single-tow volume by the total number of tows before dividing into the pooled organism count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total volume filtered across all 2525 tows: Vtotal=25×282.74 L≈7,068.6 LV_{\text{total}} = 25 \times 282.74\text{ L} \approx 7{,}068.6\text{ L}.

  2. Calculate the mean density: Density=3,180 individuals7,068.6 L≈0.450 individuals/L\text{Density} = \frac{3{,}180\text{ individuals}}{7{,}068.6\text{ L}} \approx 0.450\text{ individuals/L}.

  3. Scale by the total epilimnion volume to estimate abundance: N=(0.4499 individuals/L)×(3.40×1010 L)≈1.53×1010 individualsN = (0.4499\text{ individuals/L}) \times (3.40 \times 10^{10}\text{ L}) \approx 1.53 \times 10^{10}\text{ individuals}.

Final answer

(a) V=0.283 m3=283 LV = 0.283\text{ m}^3 = 283\text{ L}; (b) 0.450 individuals/L0.450\text{ individuals/L}; (c) N=1.53×1010 individualsN = 1.53 \times 10^{10}\text{ individuals}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check that your density formula uses cumulative sampled volume whenever sample counts are pooled across multiple hauls.

  • Verify your final population abundance by multiplying single-tow mean count by the total number of net-column volumes contained in the reservoir.

OverviewACEpath Teacher's Diagnosis

03 The student converts square kilometers to square meters by multiplying by 1,000 instead of 1,000,000, underestimating the epilimnion volume and total population by a factor of 1,000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=0.150 m  ⟹  V=π×(0.150 m)2×4.00 m=0.283 m3  ⟹  V=0.283×1,000 L=283 Lr = 0.150\text{ m} \implies V = \pi \times (0.150\text{ m})^2 \times 4.00\text{ m} = 0.283\text{ m}^3 \implies V = 0.283 \times 1{,}000\text{ L} = 283\text{ L}

  2. Step 2

    Total volume=25×283 L=7,075 L  ⟹  Concentration=3,1807,075 L=0.450 individuals/L\text{Total volume} = 25 \times 283\text{ L} = 7{,}075\text{ L} \implies \text{Concentration} = \frac{3{,}180}{7{,}075\text{ L}} = 0.450\text{ individuals/L}

  3. Step 3

    Area=8.50×1,000 m2=8,500 m2  ⟹  Vepi=8,500 m2×4.00 m=34,000 m3=3.40×107 L\text{Area} = 8.50 \times 1{,}000\text{ m}^2 = 8{,}500\text{ m}^2 \implies V_{\text{epi}} = 8{,}500\text{ m}^2 \times 4.00\text{ m} = 34{,}000\text{ m}^3 = 3.40 \times 10^7\text{ L}

    Correct

    Area=8.50 km2×(103 m/km)2=8.50×106 m2  ⟹  Vres=(8.50×106 m2)(4.00 m)=3.40×107 m3=3.40×1010 L\text{Area} = 8.50\text{ km}^2 \times (10^3\text{ m/km})^2 = 8.50 \times 10^6\text{ m}^2 \implies V_{\text{res}} = (8.50 \times 10^6\text{ m}^2)(4.00\text{ m}) = 3.40 \times 10^7\text{ m}^3 = 3.40 \times 10^{10}\text{ L}

    You converted 8.50 km28.50\text{ km}^2 to m2\text{m}^2 by multiplying by 1,0001{,}000 instead of 1,0002=1061{,}000^2 = 10^6. Because 1 km=1,000 m1\text{ km} = 1{,}000\text{ m}, 1 km2=(1,000 m)2=1,000,000 m21\text{ km}^2 = (1{,}000\text{ m})^2 = 1{,}000{,}000\text{ m}^2.

  4. Step 4

    N=0.450 individuals/L×3.40×107 L=1.53×107 individualsN = 0.450\text{ individuals/L} \times 3.40 \times 10^7\text{ L} = 1.53 \times 10^7\text{ individuals}

    Correct

    N=(0.450 individuals/L)×(3.40×1010 L)=1.53×1010 individualsN = (0.450\text{ individuals/L}) \times (3.40 \times 10^{10}\text{ L}) = 1.53 \times 10^{10}\text{ individuals}

    Your formula and multiplication step were logically sound, but the result inherited the factor-of-1,0001{,}000 deficit from the reservoir volume in step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net radius and single-tow volume in cubic meters and converted it to liters.

You accurately aggregated the filtered volume across 25 tows to find the sample zooplankton concentration.

You correctly structured the scaling formula by multiplying the reservoir volume in liters by the organism concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Area Unit Conversion Error

Multiplying square kilometers by 1,0001{,}000 instead of 10610^6 to convert to square meters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating a two-dimensional derived area unit (km2\text{km}^2) as a linear dimension (km\text{km}), omitting the required exponent on the unit conversion factor (103 m/km)2(10^3\text{ m/km})^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Square conversion factors for area
  • 1 km2=(1,000 m)2=106 m21\text{ km}^2 = (1{,}000\text{ m})^2 = 10^6\text{ m}^2, never 103 m210^3\text{ m}^2.

  • Always write out unit brackets with powers, such as (103 m1 km)2\left(\frac{10^3\text{ m}}{1\text{ km}}\right)^2, before multiplying values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the surface area properly: Area=8.50 km2×106 m2/km2=8.50×106 m2\text{Area} = 8.50\text{ km}^2 \times 10^6\text{ m}^2/\text{km}^2 = 8.50 \times 10^6\text{ m}^2.

  2. Calculate the epilimnion volume in cubic meters: Vres=8.50×106 m2×4.00 m=3.40×107 m3V_{\text{res}} = 8.50 \times 10^6\text{ m}^2 \times 4.00\text{ m} = 3.40 \times 10^7\text{ m}^3.

  3. Convert the volume to liters: Vres=3.40×107 m3×1,000 L/m3=3.40×1010 LV_{\text{res}} = 3.40 \times 10^7\text{ m}^3 \times 1{,}000\text{ L/m}^3 = 3.40 \times 10^{10}\text{ L}.

  4. Multiply mean concentration by total epilimnion volume: N=0.450 individuals/L×3.40×1010 L=1.53×1010 individualsN = 0.450\text{ individuals/L} \times 3.40 \times 10^{10}\text{ L} = 1.53 \times 10^{10}\text{ individuals}.

Final answer

N=1.53×1010 individualsN = 1.53 \times 10^{10}\text{ individuals}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting units with powers (area and volume) using explicit dimensional analysis brackets.

  • Check that large geographic water bodies yield realistic total population numbers that scale with their volume.

Lock it in

Similar question

01

A limnologist uses a plankton net with a diameter of 50.0 cm50.0\text{ cm} to take a single 6.00 m6.00\text{ m} vertical tow in a pond. Calculate the volume of water filtered in liters (1 m3=1,000 L1\text{ m}^3 = 1{,}000\text{ L}).

Answer

1,180 L1{,}180\text{ L}. Key steps: r=0.500 m2=0.250 mr = \frac{0.500\text{ m}}{2} = 0.250\text{ m}; V=π(0.250 m)2(6.00 m)=0.375π m3≈1.178 m3=1,178 LV = \pi (0.250\text{ m})^2(6.00\text{ m}) = 0.375\pi\text{ m}^3 \approx 1.178\text{ m}^3 = 1{,}178\text{ L}.

02

An ecologist samples copepods using a plankton net of diameter 40.0 cm40.0\text{ cm} hauled through an 8.00 m8.00\text{ m} water column. Across 1010 tows, 4,0204{,}020 copepods are caught. What is the mean density of copepods in individuals/L\text{individuals/L}?

Answer

0.400 individuals/L0.400\text{ individuals/L}. Key steps: r=0.200 mr = 0.200\text{ m}; single tow volume V1=π(0.200)2(8.00)≈1.0053 m3=1,005.3 LV_1 = \pi (0.200)^2(8.00) \approx 1.0053\text{ m}^3 = 1{,}005.3\text{ L}; total volume Vtot=10×1,005.3 L≈10,053 LV_{\text{tot}} = 10 \times 1{,}005.3\text{ L} \approx 10{,}053\text{ L}; density =4,02010,053≈0.400 individuals/L= \frac{4{,}020}{10{,}053} \approx 0.400\text{ individuals/L}.

03

A shallow lake has a surface area of 2.50 km22.50\text{ km}^2 and a mean depth of 3.00 m3.00\text{ m}. Zooplankton sampling yields an estimated mean concentration of 1.20 individuals/L1.20\text{ individuals/L}. Estimate the total zooplankton population in the lake.

Answer

9.00×109 individuals9.00 \times 10^9\text{ individuals}. Key steps: area A=2.50×106 m2A = 2.50 \times 10^6\text{ m}^2; lake volume V=A×h=7.50×106 m3=7.50×109 LV = A \times h = 7.50 \times 10^6\text{ m}^3 = 7.50 \times 10^9\text{ L}; total population N=(1.20 individuals/L)×(7.50×109 L)=9.00×109 individualsN = (1.20\text{ individuals/L}) \times (7.50 \times 10^9\text{ L}) = 9.00 \times 10^9\text{ individuals}.

Loading workspace…