Resources

Consider the limiting behavior of PCR amplicon accumulation across cycle number nn. While the early exponential phase follows Nn=N0(1+E)nN_n = N_0(1+E)^n, the reaction asymptotically transitions into a plateau phase where amplicon generation drops to zero. A reaction containing N0=1.00×104N_0 = 1.00 \times 10^4 target molecules and E=0.95E = 0.95 carries a limiting dNTP pool of 2.00×10−4 mol/L2.00 \times 10^{-4}\text{ mol/L} in a 50.0 μL50.0\ \mu\text{L} volume. If each amplicon is 400 bp400\text{ bp} long (800800 total incorporated dNMP units): (a) Calculate the theoretical maximum number of amplicons Nmax⁡N_{\max} that can be synthesized before complete exhaustion of the dNTP pool, using Avogadro's number NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}. (b) Determine the cycle number nn at which the exponential equation would reach this stoichiometric asymptotic ceiling.

Answer and steps

Final answer

(a) Nmax⁡=7.53×1012 ampliconsN_{\max} = 7.53 \times 10^{12}\text{ amplicons}; (b) n≈30.6n \approx 30.6 cycles (plateau reached during cycle 3131)

Steps

Part (a): Calculating the Theoretical Maximum Number of Amplicons (Nmax⁡N_{\max})

  1. Calculate the total moles of dNTPs in the reaction: Using the molar concentration CC and volume VV: ndNTP=C⋅Vn_{\text{dNTP}} = C \cdot V Substitute the given values, converting microliters to liters (50.0 μL=50.0×10−6 L50.0\ \mu\text{L} = 50.0 \times 10^{-6}\text{ L}): ndNTP=(2.00×10−4 mol/L)⋅(50.0×10−6 L)=1.00×10−8 moln_{\text{dNTP}} = (2.00 \times 10^{-4}\text{ mol/L}) \cdot (50.0 \times 10^{-6}\text{ L}) = 1.00 \times 10^{-8}\text{ mol}
  2. Convert moles of dNTPs to individual dNTP molecules: Multiply the moles of dNTPs by Avogadro's number (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}): NdNTP=ndNTP⋅NA=(1.00×10−8 mol)⋅(6.022×1023 mol−1)=6.022×1015 dNTPsN_{\text{dNTP}} = n_{\text{dNTP}} \cdot N_A = (1.00 \times 10^{-8}\text{ mol}) \cdot (6.022 \times 10^{23}\text{ mol}^{-1}) = 6.022 \times 10^{15}\text{ dNTPs}
  3. Determine the maximum number of amplicons synthesized (Nmax⁡N_{\max}): Basis: A double-stranded DNA amplicon of length 400 bp400\text{ bp} contains two complementary strands, requiring 2×400=800 dNMP2 \times 400 = 800\text{ dNMP} building blocks per amplicon.

    Divide the total available dNTP molecules by the number of nucleotides per amplicon: Nmax⁡=NdNTP800=6.022×1015800≈7.53×1012 ampliconsN_{\max} = \frac{N_{\text{dNTP}}}{800} = \frac{6.022 \times 10^{15}}{800} \approx 7.53 \times 10^{12}\text{ amplicons}

Pitfall: Forgetting that DNA is double-stranded can lead to dividing by 400400 instead of 800800, which erroneously doubles the calculated maximum yield.


Part (b): Finding the Cycle Number (nn) to Reach the Plateau Ceiling

  1. Set up the exponential amplification equation: The accumulation of amplicons during the unconstrained exponential phase follows: Nn=N0(1+E)nN_n = N_0(1 + E)^n Substitute Nn=Nmax⁡=7.5275×1012N_n = N_{\max} = 7.5275 \times 10^{12}, initial copy number N0=1.00×104N_0 = 1.00 \times 10^4, and efficiency E=0.95E = 0.95: 7.5275×1012=(1.00×104)(1+0.95)n7.5275 \times 10^{12} = (1.00 \times 10^4)(1 + 0.95)^n 7.5275×1012=(1.00×104)(1.95)n7.5275 \times 10^{12} = (1.00 \times 10^4)(1.95)^n
  2. Isolate the exponential term: (1.95)n=7.5275×10121.00×104=7.5275×108(1.95)^n = \frac{7.5275 \times 10^{12}}{1.00 \times 10^4} = 7.5275 \times 10^8
  3. Solve for nn using logarithms: Take the natural logarithm (ln⁡\ln) of both sides: ln⁡((1.95)n)=ln⁡(7.5275×108)\ln\left((1.95)^n\right) = \ln(7.5275 \times 10^8) n⋅ln⁡(1.95)=ln⁡(7.5275×108)n \cdot \ln(1.95) = \ln(7.5275 \times 10^8)

    Evaluate the logarithmic terms: ln⁡(1.95)≈0.6678\ln(1.95) \approx 0.6678 ln⁡(7.5275×108)≈20.439\ln(7.5275 \times 10^8) \approx 20.439

    Compute nn: n=20.4390.6678≈30.6 cyclesn = \frac{20.439}{0.6678} \approx 30.6\text{ cycles}

Because PCR occurs in discrete whole cycles, the reaction completes cycle 3030 with remaining substrate and would theoretically deplete the substrate ceiling during cycle 3131.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the total dNTPs by the amplicon base-pair length of 400 rather than by the 800 total incorporated nucleotides.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total moles dNTP=2.00×10−4 mol/L×50.0×10−6 L=1.00×10−8 mol  ⟹  Total dNTPs=1.00×10−8 mol×6.022×1023 mol−1=6.022×1015\text{Total moles dNTP} = 2.00 \times 10^{-4}\text{ mol/L} \times 50.0 \times 10^{-6}\text{ L} = 1.00 \times 10^{-8}\text{ mol} \implies \text{Total dNTPs} = 1.00 \times 10^{-8}\text{ mol} \times 6.022 \times 10^{23}\text{ mol}^{-1} = 6.022 \times 10^{15}

  2. Step 2

    Nmax⁡=6.022×1015400=1.506×1013 ampliconsN_{\max} = \frac{6.022 \times 10^{15}}{400} = 1.506 \times 10^{13}\text{ amplicons}

    Correct

    Nmax⁡=6.022×10152×400=6.022×1015800≈7.53×1012 ampliconsN_{\max} = \frac{6.022 \times 10^{15}}{2 \times 400} = \frac{6.022 \times 10^{15}}{800} \approx 7.53 \times 10^{12}\text{ amplicons}

    You divided by the base-pair length (400400) instead of the total number of single nucleotide monomers (800800). Because DNA is double-stranded, each 400 bp400\text{ bp} amplicon requires 2×400=800 dNTP2 \times 400 = 800\text{ dNTP} molecules.

  3. Step 3

    1.00×104×(1.95)n=1.506×1013  ⟹  1.95n=1.506×109  ⟹  n=ln⁡(1.506×109)ln⁡(1.95)≈31.61.00 \times 10^4 \times (1.95)^n = 1.506 \times 10^{13} \implies 1.95^n = 1.506 \times 10^9 \implies n = \frac{\ln(1.506 \times 10^9)}{\ln(1.95)} \approx 31.6

    Correct

    1.00×104×(1.95)n=7.5275×1012  ⟹  1.95n=7.5275×108  ⟹  n=ln⁡(7.5275×108)ln⁡(1.95)≈30.6 cycles1.00 \times 10^4 \times (1.95)^n = 7.5275 \times 10^{12} \implies 1.95^n = 7.5275 \times 10^8 \implies n = \frac{\ln(7.5275 \times 10^8)}{\ln(1.95)} \approx 30.6\text{ cycles}

    Your algebraic setup and logarithmic solving method were completely sound, but your result was shifted by using the doubled Nmax⁡N_{\max} value from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the reaction volume from microliters to liters.

You correctly used Avogadro's constant to determine the total pool of dNTP molecules.

You correctly formulated and solved the exponential growth equation using logarithms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nucleotide Stoichiometry Error

Dividing the total nucleotide pool by base pairs (400400) rather than total single nucleotides (800800).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the double-stranded nature of PCR products when converting from base pairs to monomeric dNTP consumption.

REASONING PATH
Your ACEpath teacher’s suggested approach
Double-Stranded Stoichiometry
  • 1 bp of dsDNA=2 single nucleotides (dNMPs)1\text{ bp of dsDNA} = 2\text{ single nucleotides (dNMPs)}

  • Always multiply the base-pair length by 22 when calculating consumption of dNTP building blocks.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Nmax⁡=6.022×1015 dNTPs800 dNTPs/amplicon=7.5275×1012 ampliconsN_{\max} = \frac{6.022 \times 10^{15}\text{ dNTPs}}{800\text{ dNTPs/amplicon}} = 7.5275 \times 10^{12}\text{ amplicons}

  2. (1.95)n=7.5275×10121.00×104=7.5275×108(1.95)^n = \frac{7.5275 \times 10^{12}}{1.00 \times 10^4} = 7.5275 \times 10^8

  3. n=ln⁡(7.5275×108)ln⁡(1.95)≈20.4390.6678≈30.6 cyclesn = \frac{\ln(7.5275 \times 10^8)}{\ln(1.95)} \approx \frac{20.439}{0.6678} \approx 30.6\text{ cycles}

Final answer

(a) Nmax⁡≈7.53×1012 ampliconsN_{\max} \approx 7.53 \times 10^{12}\text{ amplicons}; (b) n≈30.6 cyclesn \approx 30.6\text{ cycles} (reaches ceiling during cycle 3131)

NEXT STEPS
Final Takeaways from Your Teacher
  • In future stoichiometry problems involving nucleic acids, verify whether the length given is in single nucleotides (nt) or base pairs (bp).

  • Remember that each base pair in double-stranded DNA represents two complementary incorporated nucleotides, requiring two dNTP precursors.

OverviewACEpath Teacher's Diagnosis

02 The student uses the efficiency E = 0.95 directly as the multiplication base instead of using 1 + E = 1.95 per cycle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total moles dNTP=2.00×10−4 mol/L×50.0×10−6 L=1.00×10−8 mol  ⟹  Total dNTPs=1.00×10−8 mol×6.022×1023 mol−1=6.022×1015\text{Total moles dNTP} = 2.00 \times 10^{-4}\text{ mol/L} \times 50.0 \times 10^{-6}\text{ L} = 1.00 \times 10^{-8}\text{ mol} \implies \text{Total dNTPs} = 1.00 \times 10^{-8}\text{ mol} \times 6.022 \times 10^{23}\text{ mol}^{-1} = 6.022 \times 10^{15}

  2. Step 2

    Nmax⁡=6.022×1015/800=7.53×1012 ampliconsN_{\max} = 6.022 \times 10^{15} / 800 = 7.53 \times 10^{12}\text{ amplicons}

  3. Step 3

    1.00×104×⋯=7.53×1012  ⟹  0.95n=7.53×1081.00 \times 10^4 \times \dots = 7.53 \times 10^{12} \implies 0.95^n = 7.53 \times 10^8

    Correct

    (1.00×104)(1+0.95)n=7.53×1012  ⟹  (1.95)n=7.53×108(1.00 \times 10^4)(1 + 0.95)^n = 7.53 \times 10^{12} \implies (1.95)^n = 7.53 \times 10^8

    You substituted E=0.95E = 0.95 as the multiplication base rather than (1+E)=1.95(1 + E) = 1.95. In PCR, each cycle retains the original template strands and synthesizes EE new copies per template, yielding a multiplication factor of (1+E)(1 + E) per cycle.

  4. Step 4

    n=ln⁡(7.53×108)ln⁡(0.95)=−398.5 cycles, which is invalidn = \frac{\ln(7.53 \times 10^8)}{\ln(0.95)} = -398.5\text{ cycles, which is invalid}

    Correct

    n=ln⁡(7.53×108)ln⁡(1.95)≈20.4390.6678≈30.6 cyclesn = \frac{\ln(7.53 \times 10^8)}{\ln(1.95)} \approx \frac{20.439}{0.6678} \approx 30.6\text{ cycles}

    Your logarithmic rearrangement was algebraically sound, and you appropriately noticed that a negative cycle count was physically invalid, but the numerical result was skewed by using 0.950.95 instead of 1.951.95.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total number of dNTP molecules using concentration, volume, and Avogadro's number.

You correctly accounted for both complementary strands (800 dNMP800\text{ dNMP} per amplicon) to find Nmax⁡N_{\max}.

You recognized that a negative cycle number is impossible and noted that the result was invalid.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
PCR Amplification Factor Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the fractional efficiency EE (the fraction of templates successfully duplicated each cycle) with the overall fold-amplification base (1+E)(1 + E). Because existing DNA templates are not consumed or destroyed during PCR, the total DNA after one cycle is the existing 100%100\% plus the newly replicated fraction EE, giving (1+E)(1 + E) times the initial amount.

REASONING PATH
Your ACEpath teacher’s suggested approach
PCR Exponential Base Rule
  • The accumulation equation for PCR is Nn=N0(1+E)nN_n = N_0(1 + E)^n, where EE is the replication efficiency between 00 and 11.

  • Always add 11 to the efficiency value EE before raising it to the power of the cycle number nn.

Biological Sanity Check
  • During exponential amplification, template counts must strictly increase with cycle number, requiring an exponential base greater than 11.

  • If your base is less than 11 (e.g., 0.950.95), the model predicts exponential decay rather than amplification. Check that the base equals (1+E)≥1.0(1 + E) \ge 1.0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the exponential accumulation equation: Nn=N0(1+E)nN_n = N_0(1 + E)^n.

  2. Substitute Nmax⁡=7.53×1012N_{\max} = 7.53 \times 10^{12}, N0=1.00×104N_0 = 1.00 \times 10^4, and E=0.95E = 0.95: 7.53×1012=(1.00×104)(1.95)n7.53 \times 10^{12} = (1.00 \times 10^4)(1.95)^n.

  3. Isolate the exponential term: (1.95)n=7.53×108(1.95)^n = 7.53 \times 10^8.

  4. Take the natural logarithm of both sides: n=ln⁡(7.53×108)ln⁡(1.95)n = \frac{\ln(7.53 \times 10^8)}{\ln(1.95)}.

  5. Evaluate the quotient: n≈20.4390.6678≈30.6 cyclesn \approx \frac{20.439}{0.6678} \approx 30.6\text{ cycles}.

Final answer

n≈30.6 cyclesn \approx 30.6\text{ cycles} (reaches plateau during cycle 3131)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why the multiplier per cycle is (1+E)(1 + E) by tracing a single cycle where 11 template molecule yields 11 original + 11 new copy at 100%100\% efficiency.

  • Practice solving for cycle number nn with different efficiency values (e.g., E=0.85E = 0.85 giving a base of 1.851.85).

  • Work through the three targeted flashcards and practice problems below.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly treats the micro-liter volume as 10⁻³ L instead of 10⁻⁶ L during the unit conversion, overestimating total dNTPs by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total moles dNTP=2.00×10−4 mol/L×50.0×10−3 L=1.00×10−5 mol\text{Total moles dNTP} = 2.00 \times 10^{-4}\text{ mol/L} \times 50.0 \times 10^{-3}\text{ L} = 1.00 \times 10^{-5}\text{ mol}

    Correct

    ndNTP=C⋅V=(2.00×10−4 mol/L)×(50.0×10−6 L)=1.00×10−8 moln_{\text{dNTP}} = C \cdot V = (2.00 \times 10^{-4}\text{ mol/L}) \times (50.0 \times 10^{-6}\text{ L}) = 1.00 \times 10^{-8}\text{ mol}

    You used the milli- prefix factor (10−310^{-3}) instead of the micro- prefix factor (10−610^{-6}) when converting 50.0 μL50.0\ \mu\text{L} to liters.

  2. Step 2

    Total dNTPs=1.00×10−5 mol×6.022×1023 mol−1=6.022×1018\text{Total dNTPs} = 1.00 \times 10^{-5}\text{ mol} \times 6.022 \times 10^{23}\text{ mol}^{-1} = 6.022 \times 10^{18}

    Correct

    NdNTP=(1.00×10−8 mol)×(6.022×1023 mol−1)=6.022×1015N_{\text{dNTP}} = (1.00 \times 10^{-8}\text{ mol}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) = 6.022 \times 10^{15}

    You multiplied your molar quantity by Avogadro's number correctly, but the result carried forward the 10001000-fold overestimate from Step 1.

  3. Step 3

    Nmax⁡=6.022×1018800=7.53×1015 ampliconsN_{\max} = \frac{6.022 \times 10^{18}}{800} = 7.53 \times 10^{15}\text{ amplicons}

    Correct

    Nmax⁡=6.022×1015800≈7.53×1012 ampliconsN_{\max} = \frac{6.022 \times 10^{15}}{800} \approx 7.53 \times 10^{12}\text{ amplicons}

    You recognized that each 400 bp400\text{ bp} double-stranded amplicon requires 800800 dNMP units, but the calculated yield reflected the erroneous dNTP molecule count.

  4. Step 4

    1.00×104×(1.95)n=7.53×1015  ⟹  1.95n=7.53×1011  ⟹  n=ln⁡(7.53×1011)ln⁡(1.95)≈41.01.00 \times 10^4 \times (1.95)^n = 7.53 \times 10^{15} \implies 1.95^n = 7.53 \times 10^{11} \implies n = \frac{\ln(7.53 \times 10^{11})}{\ln(1.95)} \approx 41.0

    Correct

    1.00×104×(1.95)n=7.53×1012  ⟹  n=ln⁡(7.53×108)ln⁡(1.95)≈30.6 cycles1.00 \times 10^4 \times (1.95)^n = 7.53 \times 10^{12} \implies n = \frac{\ln(7.53 \times 10^8)}{\ln(1.95)} \approx 30.6\text{ cycles}

    You set up the exponential amplification model and solved for nn using logarithms accurately, arriving at 41.041.0 due to the propagated ceiling value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the double-stranded stoichiometry factor of 800 dNMP800\text{ dNMP} per 400 bp400\text{ bp} amplicon.

You accurately applied Avogadro's constant to convert moles into discrete molecules.

You set up the exponential amplification equation Nn=N0(1+E)nN_n = N_0(1+E)^n and correctly solved for nn using natural logarithms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion

You substituted 10−3 L10^{-3}\text{ L} instead of 10−6 L10^{-6}\text{ L} when converting 50.0 μL50.0\ \mu\text{L} to liters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the SI prefix milli- (10−310^{-3}) with micro- (10−610^{-6}), leading to a thousand-fold overestimation of the initial moles of dNTPs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric SI Prefix Verification
  • 1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L}, whereas 1 μL=10−6 L1\ \mu\text{L} = 10^{-6}\text{ L}.

  • Always double-check micro-liter conversions by writing V=50.0 μL×10−6 L1 μL=50.0×10−6 LV = 50.0\ \mu\text{L} \times \frac{10^{-6}\text{ L}}{1\ \mu\text{L}} = 50.0 \times 10^{-6}\text{ L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate total dNTP moles using the proper volume: ndNTP=(2.00×10−4 mol/L)×(50.0×10−6 L)=1.00×10−8 moln_{\text{dNTP}} = (2.00 \times 10^{-4}\text{ mol/L}) \times (50.0 \times 10^{-6}\text{ L}) = 1.00 \times 10^{-8}\text{ mol}.

  2. Convert to molecules: NdNTP=1.00×10−8 mol×6.022×1023 mol−1=6.022×1015 dNTPsN_{\text{dNTP}} = 1.00 \times 10^{-8}\text{ mol} \times 6.022 \times 10^{23}\text{ mol}^{-1} = 6.022 \times 10^{15}\text{ dNTPs}.

  3. Divide by 800 dNMP/amplicon800\text{ dNMP/amplicon}: Nmax⁡=6.022×1015800≈7.53×1012 ampliconsN_{\max} = \frac{6.022 \times 10^{15}}{800} \approx 7.53 \times 10^{12}\text{ amplicons}.

  4. Substitute into Nn=N0(1+E)nN_n = N_0(1+E)^n: (1.95)n=7.53×10121.00×104=7.53×108(1.95)^n = \frac{7.53 \times 10^{12}}{1.00 \times 10^4} = 7.53 \times 10^8.

  5. Solve for nn: n=ln⁡(7.53×108)ln⁡(1.95)≈20.4390.6678≈30.6 cyclesn = \frac{\ln(7.53 \times 10^8)}{\ln(1.95)} \approx \frac{20.439}{0.6678} \approx 30.6\text{ cycles}.

Final answer

(a) Nmax⁡=7.53×1012 ampliconsN_{\max} = 7.53 \times 10^{12}\text{ amplicons}; (b) n≈30.6 cyclesn \approx 30.6\text{ cycles} (plateau reached during cycle 3131)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review SI volume prefixes: milliliters (10−3 L10^{-3}\text{ L}), microliters (10−6 L10^{-6}\text{ L}), and nanoliters (10−9 L10^{-9}\text{ L}).

  • Incorporate explicit dimensional analysis unit cancellation factors during molarity calculations.

  • Practice recalculating cycle plateau ceilings with various initial reaction volumes.

Lock it in

Similar question

01

A 25.0 μL25.0\ \mu\text{L} PCR reaction contains a total dNTP concentration of 4.00×10−4 mol/L4.00 \times 10^{-4}\text{ mol/L}. Calculate the maximum number of 300 bp300\text{ bp} double-stranded amplicons that can be synthesized before dNTP exhaustion (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}).

Answer

Total dNTP moles =(4.00×10−4 mol/L)(2.50×10−5 L)=1.00×10−8 mol= (4.00 \times 10^{-4}\text{ mol/L})(2.50 \times 10^{-5}\text{ L}) = 1.00 \times 10^{-8}\text{ mol}. Total dNTP molecules =1.00×10−8×6.022×1023=6.022×1015= 1.00 \times 10^{-8} \times 6.022 \times 10^{23} = 6.022 \times 10^{15}. Since each amplicon is 300 bp300\text{ bp}, it requires 2×300=600 dNTPs2 \times 300 = 600\text{ dNTPs}. Thus, Nmax⁡=6.022×1015600≈1.00×1013 ampliconsN_{\max} = \frac{6.022 \times 10^{15}}{600} \approx 1.00 \times 10^{13}\text{ amplicons}.

02

Starting from N0=5.00×103N_0 = 5.00 \times 10^3 template molecules with an amplification efficiency of E=0.90E = 0.90, determine the theoretical cycle number nn required to synthesize 1.00×10121.00 \times 10^{12} amplicons.

Answer

Using Nn=N0(1+E)nN_n = N_0(1+E)^n: (1.90)n=1.00×10125.00×103=2.00×108(1.90)^n = \frac{1.00 \times 10^{12}}{5.00 \times 10^3} = 2.00 \times 10^8. Taking natural logs: n=ln⁡(2.00×108)ln⁡(1.90)≈19.1140.6419≈29.8 cyclesn = \frac{\ln(2.00 \times 10^8)}{\ln(1.90)} \approx \frac{19.114}{0.6419} \approx 29.8\text{ cycles}.

03

In a 100.0 μL100.0\ \mu\text{L} reaction, the limiting reagent is forward primer at a concentration of 0.200 μM0.200\ \mu\text{M}. Each double-stranded amplicon incorporates exactly one forward primer and one reverse primer. (a) What is the maximum number of amplicons limited by this primer? (b) If each amplicon is 500 bp500\text{ bp}, how many moles of dNTPs are required to synthesize this number of amplicons?

Answer

(a) Total forward primer moles =(0.200×10−6 mol/L)(1.00×10−4 L)=2.00×10−11 mol= (0.200 \times 10^{-6}\text{ mol/L})(1.00 \times 10^{-4}\text{ L}) = 2.00 \times 10^{-11}\text{ mol}. Maximum amplicons =2.00×10−11 mol×6.022×1023 mol−1≈1.20×1013 amplicons= 2.00 \times 10^{-11}\text{ mol} \times 6.022 \times 10^{23}\text{ mol}^{-1} \approx 1.20 \times 10^{13}\text{ amplicons}. (b) Each amplicon requires 2×500=1000 nucleotides2 \times 500 = 1000\text{ nucleotides}. Moles of dNTPs required =1000×2.00×10−11 mol=2.00×10−8 mol= 1000 \times 2.00 \times 10^{-11}\text{ mol} = 2.00 \times 10^{-8}\text{ mol}.

Loading workspace…