Resources

An environmental water quality technician assays a sample containing coliform bacteria. After incubating the sample for t=5.0 hourst = 5.0\text{ hours} under conditions where the generation time is known to be g=30 ming = 30\text{ min}, the bacterial population reaches a measured density of Nt=8.192×106 cells/mLN_t = 8.192 \times 10^6\text{ cells/mL}. Working backward, calculate the initial bacterial concentration (N0N_0) present in the sample at time t=0 hourst = 0\text{ hours}.

Answer and steps

Final answer

N0=8.00×103 cells/mLN_0 = 8.00 \times 10^3\text{ cells/mL}

Steps

01

Calculate the Number of Generations (nn)

Method: Bacterial Exponential Growth Formula

During the exponential (log) growth phase, bacteria reproduce primarily through binary fission, where each cell divides into two identical daughter cells after one generation time (gg). The relationship between the initial population size (N0N_0), the final population size (NtN_t), and the number of generations (nn) is given by: Nt=N0⋅2nN_t = N_0 \cdot 2^n

First, ensure that the total incubation time (tt) and the generation time (gg) are expressed in the same units:

  • Total time: t=5.0 hours=5.0×60 min=300 mint = 5.0\text{ hours} = 5.0 \times 60\text{ min} = 300\text{ min}
  • Generation time: g=30 ming = 30\text{ min}

The number of generations (nn) is the total time divided by the generation time:

n=tg=300 min30 min=10 generationsn = \frac{t}{g} = \frac{300\text{ min}}{30\text{ min}} = 10\text{ generations}


02

Rearrange the Growth Formula for N0N_0

Rearranging the exponential growth equation to solve for the initial population density gives:

N0=Nt2nN_0 = \frac{N_t}{2^n}


03

Compute the Initial Concentration (N0N_0)

Evaluate the doubling factor for n=10n = 10:

210=10242^{10} = 1024

Substitute the measured final concentration (Nt=8.192×106 cells/mLN_t = 8.192 \times 10^6\text{ cells/mL}) into the equation:

N0=8.192×106 cells/mL1024N_0 = \frac{8.192 \times 10^6\text{ cells/mL}}{1024}

N0=8,192,0001024 cells/mL=8000 cells/mL=8.00×103 cells/mLN_0 = \frac{8{,}192{,}000}{1024}\text{ cells/mL} = 8000\text{ cells/mL} = 8.00 \times 10^3\text{ cells/mL}


Common Pitfall to Avoid

  • Unit Mismatch: Calculating nn directly using 5.0/305.0 / 30 results in an incorrect generation count because hours and minutes were mixed. Always convert both durations to identical time units before calculating nn.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert hours to minutes before calculating the number of generations, dividing 5.0 directly by 30 to get n = 1/6.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=tg=5.030=0.167n = \frac{t}{g} = \frac{5.0}{30} = 0.167

    Correct

    n=tg=5.0 h×60 min/h30 min=10n = \frac{t}{g} = \frac{5.0\text{ h} \times 60\text{ min/h}}{30\text{ min}} = 10

    You divided total time in hours (5.0 h5.0\text{ h}) directly by generation time in minutes (30 min30\text{ min}). Because the units do not match, the resulting generation count is incorrect.

  2. Step 2

    N0=Nt2nN_0 = \frac{N_t}{2^n}

  3. Step 3

    N0=8.192×10620.167=7.299×106 cells/mLN_0 = \frac{8.192 \times 10^6}{2^{0.167}} = 7.299 \times 10^6\text{ cells/mL}

    Correct

    N0=8.192×106 cells/mL210=8.00×103 cells/mLN_0 = \frac{8.192 \times 10^6\text{ cells/mL}}{2^{10}} = 8.00 \times 10^3\text{ cells/mL}

    Your calculation correctly follows your formula, but substituting the incorrect value n=0.167n = 0.167 instead of n=10n = 10 produced an incorrect final concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the bacterial binary fission formula Nt=N0⋅2nN_t = N_0 \cdot 2^n.

You correctly rearranged the formula to solve for the initial population N0N_0.

You carried out the arithmetic consistently using your computed value for nn.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch in Generation Count

You divided hours by minutes without first converting both quantities to the same unit of time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to align units of measurement before computing a ratio (n=t/gn = t/g), which caused the bacterial population to appear as though it had undergone only a fraction of a doubling instead of multiple doublings.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • The numerator and denominator in n=t/gn = t/g must share identical time units (either both in minutes or both in hours).

  • Always write the units explicitly in the calculation: n=5.0 h×60 min/h30 min=10n = \frac{5.0\text{ h} \times 60\text{ min/h}}{30\text{ min}} = 10.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert incubation time from hours to minutes: t=5.0 h×60 min/h=300 mint = 5.0\text{ h} \times 60\text{ min/h} = 300\text{ min}.

  2. Calculate the true number of generations: n=300 min30 min=10n = \frac{300\text{ min}}{30\text{ min}} = 10.

  3. Evaluate the doubling factor: 210=10242^{10} = 1024.

  4. Compute N0N_0: N0=8.192×106 cells/mL1024=8.00×103 cells/mLN_0 = \frac{8.192 \times 10^6\text{ cells/mL}}{1024} = 8.00 \times 10^3\text{ cells/mL}.

Final answer

N0=8.00×103 cells/mLN_0 = 8.00 \times 10^3\text{ cells/mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out physical units beside numbers during multi-unit division to catch mismatches immediately.

  • Perform a reality check: if bacteria double every 30 minutes30\text{ minutes}, a 5-hour5\text{-hour} incubation must yield more than one generation, so nn cannot be a decimal less than 11.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets bacterial binary fission as linear growth by multiplying or dividing by the number of generations instead of using 2 as the exponential base.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=5.0 h=300 min  ⟹  n=30030=10 generationst = 5.0\text{ h} = 300\text{ min} \implies n = \frac{300}{30} = 10\text{ generations}

  2. Step 2

    N0=NtnN_0 = \frac{N_t}{n}

    Correct

    N0=Nt2nN_0 = \frac{N_t}{2^n}

    Because bacteria reproduce by binary fission, the population doubles every generation (Nt=N0⋅2nN_t = N_0 \cdot 2^n). To work backward to N0N_0, you need to divide NtN_t by 2n2^n, not by nn.

  3. Step 3

    N0=8.192×10610=8.192×105 cells/mLN_0 = \frac{8.192 \times 10^6}{10} = 8.192 \times 10^5\text{ cells/mL}

    Correct

    N0=8.192×106 cells/mL210=8.192×1061024=8.00×103 cells/mLN_0 = \frac{8.192 \times 10^6\text{ cells/mL}}{2^{10}} = \frac{8.192 \times 10^6}{1024} = 8.00 \times 10^3\text{ cells/mL}

    Your arithmetic follows from your formula in step 2, but substituting into the linear model produces an incorrect initial concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted hours to minutes so that the units matched the generation time.

You accurately calculated the total number of generations as n=10n = 10.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Exponential Growth Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated bacterial population growth as a linear process proportional to the number of generations (nn) instead of an exponential process where the population doubles with each generation (2n2^n).

REASONING PATH
Your ACEpath teacher’s suggested approach
Binary Fission Doubling Rule
  • During exponential growth by binary fission, each generation doubles the existing cell count: Nt=N0⋅2nN_t = N_0 \cdot 2^n.

  • Always use base 2 raised to the power of the number of generations (2n2^n) rather than multiplying or dividing directly by nn.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the exponential growth equation: Nt=N0⋅2nN_t = N_0 \cdot 2^n

  2. Rearrange for the initial concentration: N0=Nt2nN_0 = \frac{N_t}{2^n}

  3. Compute the growth factor for n=10n = 10: 210=10242^{10} = 1024

  4. Divide the final population density by 10241024: N0=8.192×106 cells/mL1024=8000 cells/mLN_0 = \frac{8.192 \times 10^6\text{ cells/mL}}{1024} = 8000\text{ cells/mL}

Final answer

N0=8.00×103 cells/mLN_0 = 8.00 \times 10^3\text{ cells/mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mechanism of binary fission to reinforce why cell division leads to powers of 22.

  • Practice distinguishing linear rate problems from exponential doubling problems before setting up your algebraic equation.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by 2ⁿ instead of dividing by 2ⁿ when working backward to find the initial population from the final population.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=5.0 h=300 min  ⟹  n=30030=10t = 5.0\text{ h} = 300\text{ min} \implies n = \frac{300}{30} = 10

  2. Step 2

    N0=Nt×210N_0 = N_t \times 2^{10}

    Correct

    N0=Nt210N_0 = \frac{N_t}{2^{10}}

    Because bacterial populations double over time, the relationship is Nt=N0⋅2nN_t = N_0 \cdot 2^n. When working backward to find the smaller initial population N0N_0, you need to divide NtN_t by 2n2^n, not multiply.

  3. Step 3

    N0=8.192×106×1024=8.389×109 cells/mLN_0 = 8.192 \times 10^6 \times 1024 = 8.389 \times 10^9\text{ cells/mL}

    Correct

    N0=8.192×106 cells/mL1024=8.00×103 cells/mLN_0 = \frac{8.192 \times 10^6\text{ cells/mL}}{1024} = 8.00 \times 10^3\text{ cells/mL}

    Your numerical evaluation correctly carried out the multiplication you wrote, but it leads to an incorrect final concentration because of the inverted formula from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted 5.0 hours5.0\text{ hours} to 300 minutes300\text{ minutes} to match the units of generation time.

You accurately calculated the total number of generations as n=10n = 10.

You correctly evaluated 210=10242^{10} = 1024.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Operation Error in Exponential Growth

You set up N0=Nt⋅2nN_0 = N_t \cdot 2^n rather than isolating N0N_0 by dividing both sides of Nt=N0⋅2nN_t = N_0 \cdot 2^n by 2n2^n.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing forward exponential growth with backward reconstruction. Forward growth multiplies the starting count by 2n2^n, so reversing the process to find an earlier, smaller population requires dividing by 2n2^n.

REASONING PATH
Your ACEpath teacher’s suggested approach
Biological Sanity Check
  • During population growth, N0<NtN_0 < N_t.

  • Always check whether your calculated initial population is smaller than the final population. An answer larger than NtN_t means multiplication occurred instead of division.

Algebraic Isolation
  • Nt=N0⋅2n  ⟹  N0=Nt2nN_t = N_0 \cdot 2^n \implies N_0 = \frac{N_t}{2^n}.

  • Write out the base formula Nt=N0⋅2nN_t = N_0 \cdot 2^n first, then divide both sides by 2n2^n before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the fundamental binary fission equation: Nt=N0⋅2nN_t = N_0 \cdot 2^n

  2. Divide both sides by 2n2^n: N0=Nt2nN_0 = \frac{N_t}{2^n}

  3. Substitute Nt=8.192×106 cells/mLN_t = 8.192 \times 10^6\text{ cells/mL} and 210=10242^{10} = 1024: N0=8,192,000 cells/mL1024N_0 = \frac{8{,}192{,}000\text{ cells/mL}}{1024}

  4. Simplify: N0=8000 cells/mL=8.00×103 cells/mLN_0 = 8000\text{ cells/mL} = 8.00 \times 10^3\text{ cells/mL}

Final answer

N0=8.00×103 cells/mLN_0 = 8.00 \times 10^3\text{ cells/mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the direction of time in exponential growth problems to confirm whether you are predicting future growth (multiply) or deducing an initial inoculum (divide).

  • Perform a quick order-of-magnitude sanity check on your final value to ensure N0<NtN_0 < N_t.

Lock it in

Similar question

01

A culture of Escherichia coli has a generation time of 20 min20\text{ min}. If the culture is incubated for 3.0 hours3.0\text{ hours} and reaches a population density of 5.12×105 cells/mL5.12 \times 10^5\text{ cells/mL}, calculate the initial population density N0N_0.

Answer

N0=1.00×103 cells/mLN_0 = 1.00 \times 10^3\text{ cells/mL}. Key steps: Convert time to minutes: t=3.0 h×60=180 mint = 3.0\text{ h} \times 60 = 180\text{ min}. Find generations: n=180 min20 min=9n = \frac{180\text{ min}}{20\text{ min}} = 9. Solve: N0=Nt29=5.12×105512=1.00×103 cells/mLN_0 = \frac{N_t}{2^9} = \frac{5.12 \times 10^5}{512} = 1.00 \times 10^3\text{ cells/mL}.

02

A food safety lab measures 1.60×107 CFU/g1.60 \times 10^7\text{ CFU/g} of Salmonella in potato salad left at room temperature for 4.0 hours4.0\text{ hours}. The initial contamination was 2.50×105 CFU/g2.50 \times 10^5\text{ CFU/g}. Assuming exponential growth via binary fission, determine the generation time (gg) in minutes.

Answer

g=40 ming = 40\text{ min}. Key steps: Doubling ratio NtN0=1.60×1072.50×105=64=26\frac{N_t}{N_0} = \frac{1.60 \times 10^7}{2.50 \times 10^5} = 64 = 2^6, so n=6n = 6 generations. Total time in minutes: t=4.0 h×60=240 mint = 4.0\text{ h} \times 60 = 240\text{ min}. Generation time: g=tn=240 min6=40 ming = \frac{t}{n} = \frac{240\text{ min}}{6} = 40\text{ min}.

03

In a bioreactor, a bacterial population expands from N0=5.00×102 cells/mLN_0 = 5.00 \times 10^2\text{ cells/mL} to Nt=1.28×105 cells/mLN_t = 1.28 \times 10^5\text{ cells/mL}. The doubling time is 45 min45\text{ min}. Express the total elapsed incubation time tt in hours.

Answer

t=6.0 hourst = 6.0\text{ hours}. Key steps: Growth ratio NtN0=1.28×1055.00×102=256=28\frac{N_t}{N_0} = \frac{1.28 \times 10^5}{5.00 \times 10^2} = 256 = 2^8, so n=8n = 8 generations. Total time in minutes: t=n⋅g=8×45 min=360 mint = n \cdot g = 8 \times 45\text{ min} = 360\text{ min}. Convert to hours: t=360 min60 min/h=6.0 hourst = \frac{360\text{ min}}{60\text{ min/h}} = 6.0\text{ hours}.

Loading workspace…