Resources

During mitotic cell division in a vertebrate somatic cell (2n=202n = 20), the spindle assembly checkpoint (SAC) monitors microtubule-kinetochore attachment. Suppose 3939 of the 4040 kinetochores are securely bound to bi-oriented amphitelic kinetochore microtubules under tension, but exactly one single kinetochore on chromosome 77 remains unattached. Identify: (a) the exact mitotic stage in which the cell is arrested at this critical boundary, (b) the specific transition that is blocked by the active checkpoint signal (Mad2/BubR1 complex inhibiting the APC/C), and (c) the precise biochemical event that must occur to cross this threshold and initiate the next stage.

Answer and steps

Final answer

(a) Mitotic stage: Prometaphase/Metaphase boundary (Metaphase arrest); (b) Blocked transition: Metaphase-to-Anaphase transition; (c) Required threshold event: Complete bipolar tension and attachment of the final kinetochore to spindle microtubules, leading to the inactivation of the SAC, activation of the APC/C (anaphase-promoting complex/cyclosome), and subsequent degradation of securin to activate separase.

Steps

01

Identify the Mitotic Stage of Arrest (Part a)

Understanding the Role of the Spindle Assembly Checkpoint (SAC)

In eukaryotic cell division, accurate chromosome segregation depends on the Spindle Assembly Checkpoint (SAC). The SAC acts as a surveillance mechanism that monitors whether every single kinetochore has formed a stable, bi-oriented (amphitelic) attachment to spindle microtubules under tension before sister chromatids are pulled apart.

  • Chromosome Count and Kinetochores: A diploid somatic cell with 2n=202n = 20 contains 2020 replicated chromosomes during mitosis. Because each replicated chromosome consists of 22 sister chromatids, there are a total of: 20×2=40 kinetochores20 \times 2 = 40 \text{ kinetochores}
  • State of the Cell: With 3939 of the 4040 kinetochores attached, almost all chromosomes have aligned along the equatorial plate (the metaphase plate). However, even a single unattached kinetochore recruits SAC proteins (such as Mad1, Mad2, BubR1, and Bub3) and produces a diffusible "wait-anaphase" signal.
  • Stage: Because the chromosomes cannot fully achieve complete alignment and proceed, the cell is held at the prometaphase-to-metaphase transition (commonly referred to as metaphase arrest or the prometaphase/metaphase boundary).

02

Identify the Blocked Transition (Part b)

  • The Checkpoint Signal: Unattached kinetochores catalyze the assembly of the Mitotic Checkpoint Complex (MCC), composed primarily of Mad2, BubR1, Bub3, and Cdc20.
  • Target of the Complex: The MCC binds to and directly inhibits the Anaphase-Promoting Complex/Cyclosome (APC/C\text{APC/C}) by sequestering its co-factor, Cdc20\text{Cdc20}.
  • The Resulting Block: Because active APC/CCdc20\text{APC/C}^{\text{Cdc20}} is required to drive the separation of sister chromatids, its inhibition arrests the cell, specifically blocking the metaphase-to-anaphase transition.

03

Determine the Required Biochemical Events to Cross the Threshold (Part c)

To exit the arrest and initiate anaphase, a cascade of structural and biochemical events must occur:

  1. Microtubule Capture and Tension: The single unattached kinetochore on chromosome 77 must capture spindle microtubules emanating from the opposite spindle pole, establishing bi-oriented amphitelic attachment under mechanical tension.
  2. SAC Silencing: Mechanical tension and microtubule occupancy cause the SAC proteins (Mad1/Mad2) to dissociate from the kinetochore, stopping production of the inhibitory MCC.
  3. APC/CCdc20\text{APC/C}^{\text{Cdc20}} Activation: Free Cdc20\text{Cdc20} binds and activates APC/C\text{APC/C}.
  4. Target Degradation by Ubiquitination: Active APC/CCdc20\text{APC/C}^{\text{Cdc20}} polyubiquitinates two key inhibitory targets for destruction by the 26S26\text{S} proteasome:
    • Securin (an inhibitor of the protease separase).
    • Cyclin B (the regulatory subunit of CDK1\text{CDK1}).
  5. Cohesin Cleavage: Once securin is degraded, free and active separase cleaves the kleisin subunit (Scc1/Rad21\text{Scc1/Rad21}) of the cohesin rings holding sister chromatids together, thereby triggering synchronous poleward chromatid movement (anaphase onset).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the metaphase-to-anaphase checkpoint arrest with anaphase itself, assuming chromosome movement has already started because most kinetochores are attached.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Cell is arrested in anaphase

    Correct

    Metaphase arrest (or Prometaphase/Metaphase boundary)

    Anaphase cannot begin until all sister chromatid cohesion is dissolved. A single unattached kinetochore keeps the spindle assembly checkpoint (SAC) active, holding the cell at metaphase.

  2. Step 2

    Anaphase-to-telophase transition

    Correct

    Metaphase-to-anaphase transition

    The active checkpoint signal inhibits APC/CCdc20\text{APC/C}^{\text{Cdc20}}, which specifically blocks the transition from metaphase to anaphase.

  3. Step 3

    Complete kinetochore microtubule attachment to chromosome 7 and activation of APC/C to degrade securin

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the unattached kinetochore on chromosome 77 must achieve complete microtubule attachment to silence the checkpoint.

You accurately stated that checkpoint release leads to the activation of the APC/C\text{APC/C} and the targeted degradation of securin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cell Cycle Checkpoint Timing Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that having the vast majority of kinetochores attached (3939 out of 4040) means the cell has already entered anaphase. In reality, the spindle assembly checkpoint is an all-or-none gate that halts the cell at metaphase before any sister chromatid separation or poleward movement can occur.

REASONING PATH
Your ACEpath teacher’s suggested approach
Checkpoint Arrest Stage
  • The Spindle Assembly Checkpoint (SAC) arrests cells at the metaphase-to-anaphase transition, meaning the cell remains arrested in metaphase.

  • Always verify whether sister chromatids have actually separated before identifying a stage as anaphase; if chromatids remain paired at the equatorial plate, the cell is in metaphase.

All-or-None SAC Sensitivity
  • Even a single unattached or tensionless kinetochore produces sufficient Mitotic Checkpoint Complex (MCC) to inhibit all cellular APC/CCdc20\text{APC/C}^{\text{Cdc20}}.

  • Treat 39/4039/40 attachment as an absolute arrest at metaphase, not partial or early anaphase.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that as long as securin is intact and separase is inhibited, sister chromatids cannot split, so the cell has not entered anaphase.

  2. Identify the arrested stage as metaphase (or the prometaphase/metaphase boundary) because chromosomes are aligned or attempting to align at the metaphase plate.

  3. Identify the blocked transition as the metaphase-to-anaphase transition governed by APC/CCdc20\text{APC/C}^{\text{Cdc20}} activation.

  4. Retain your correct biochemical pathway: bipolar attachment of chromosome 77 silences the SAC, activating the APC/C\text{APC/C} to degrade securin and activate separase.

Final answer

(a) Metaphase arrest (or Prometaphase/Metaphase boundary); (b) Metaphase-to-anaphase transition; (c) Bipolar attachment and tension of chromosome 77's unattached kinetochore, leading to SAC inactivation, APC/CCdc20\text{APC/C}^{\text{Cdc20}} activation, and securin degradation.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the key molecular gatekeepers of each cell cycle checkpoint (e.g., SAC at metaphase-to-anaphase, G2/M DNA damage checkpoint).

  • Practice diagramming the Mad2/Cdc20/securin/separase/cohesin cascade to solidify the cause-and-effect chain of mitotic transitions.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the target of APC/C activation as cohesin cleavage directly by APC/C rather than via securin degradation and separase activation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Prometaphase

  2. Step 2

    Metaphase-to-anaphase transition

  3. Step 3

    Direct ubiquitination and degradation of cohesin complexes by APC/C

    Correct

    Bipolar attachment and tension of the unattached kinetochore silences the SAC, enabling APC/CCdc20\text{APC/C}^{\text{Cdc20}} to target securin for proteasomal degradation, which unleashes active separase to cleave cohesin.

    The anaphase-promoting complex does not directly ubiquitinate or degrade cohesin. Instead, APC/CCdc20\text{APC/C}^{\text{Cdc20}} polyubiquitinates the inhibitory chaperone securin. Once securin is degraded by the 26S26\text{S} proteasome, the active protease separase endoproteolytically cleaves the cohesin ring.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that an unattached kinetochore arrests the mitotic cell at the prometaphase boundary.

You accurately identified that the active spindle assembly checkpoint prevents progression into anaphase.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cohesin Cleavage Pathway Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the direct ubiquitination target of APC/C\text{APC/C} (securin) with the ultimate structural target cleaved during chromatid separation (cohesin), skipping the intermediate activation of the protease separase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct Target of APC/C
  • Active APC/CCdc20\text{APC/C}^{\text{Cdc20}} functions as an E3\text{E3} ubiquitin ligase whose primary regulatory targets at anaphase onset are securin and cyclin B, not cohesin.

  • Always recall that APC/C\text{APC/C} polyubiquitinates securin for destruction, leaving cohesin cleavage to an intermediate protease.

Cohesin Removal Mechanism
  • Cohesin rings are cleaved proteolytically by active separase (an endopeptidase), not destroyed by direct ubiquitination.

  • Trace the linear cascade: APC/C\text{APC/C} activation ⟶\longrightarrow Securin degradation ⟶\longrightarrow Separase activation ⟶\longrightarrow Cohesin cleavage.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Establish stable amphitelic attachment under tension at the final kinetochore on chromosome 77, dissociating Mad2 and silencing the checkpoint.

  2. Activate APC/C\text{APC/C} by binding free Cdc20\text{Cdc20}, which polyubiquitinates securin (and cyclin B) for degradation by the 26S26\text{S} proteasome.

  3. Release free, active separase from securin inhibition to cleave the kleisin subunit of the cohesin complex, triggering anaphase onset.

Final answer

(a) Prometaphase (prometaphase/metaphase boundary); (b) Metaphase-to-anaphase transition; (c) Kinetochore tension/attachment silences the SAC, allowing APC/CCdc20\text{APC/C}^{\text{Cdc20}} to ubiquitinate securin for proteasomal degradation, which frees separase to cleave cohesin rings.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the regulatory cascade connecting the spindle assembly checkpoint (SAC) to separase activation.

  • Practice distinguishing ubiquitination targets of APC/C\text{APC/C} (securin, cyclin B) from endoproteolytic cleavage targets of separase (cohesin/Scc1).

OverviewACEpath Teacher's Diagnosis

03 The student confuses the spindle assembly checkpoint with the G2/M DNA damage checkpoint, concluding that the cell is blocked at the G2-to-M transition.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    G2 phase\text{G2 phase}

    Correct

    Prometaphase/Metaphase boundary (Metaphase arrest)\text{Prometaphase/Metaphase boundary (Metaphase arrest)}

    The cell is already in active mitosis, as kinetochores and mitotic spindles have formed and 39 of 40 kinetochores are aligned. A single unattached kinetochore holds the cell at the prometaphase/metaphase boundary.

  2. Step 2

    G2-to-mitosis transition\text{G2-to-mitosis transition}

    Correct

    Metaphase-to-Anaphase transition\text{Metaphase-to-Anaphase transition}

    The spindle assembly checkpoint specifically arrests cells prior to sister chromatid separation, which blocks the transition from metaphase to anaphase, not mitotic entry from G2.

  3. Step 3

    Dephosphorylation of CDK1 by Cdc25 phosphatase\text{Dephosphorylation of CDK1 by Cdc25 phosphatase}

    Correct

    Bipolar attachment of the final kinetochore under tension, leading to SAC inactivation, APC/CCdc20 activation, and securin degradation\text{Bipolar attachment of the final kinetochore under tension, leading to SAC inactivation, APC/C}^{\text{Cdc20}}\text{ activation, and securin degradation}

    Dephosphorylation of CDK1\text{CDK1} by Cdc25\text{Cdc25} drives entry into mitosis at the G2/M checkpoint. Crossing the SAC threshold instead requires full microtubule attachment under tension, which silences the checkpoint complex and allows active APC/CCdc20\text{APC/C}^{\text{Cdc20}} to ubiquitinate securin so separase can cleave cohesin.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that Cdc25\text{Cdc25} dephosphorylates CDK1\text{CDK1} to regulate a major cell cycle transition.

You recognized that checkpoints rely on specific biochemical triggers to allow transition to the next phase.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Checkpoint Confusion (G2/M vs. SAC)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the spindle assembly checkpoint (SAC / M-checkpoint) with the G2/M transition checkpoint, applying the regulators of mitotic entry (CDK1/Cdc25) instead of those controlling sister chromatid separation (APC/C, securin, and separase).

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate the Checkpoint in the Cell Cycle
  • Checkpoints occur at distinct phases: G1/S checks cell size and DNA integrity; G2/M checks completed DNA replication and damage before mitotic entry; the SAC (M-checkpoint) checks bipolar kinetochore-microtubule attachment before anaphase onset.

  • Identify the physical structures described: if kinetochores, spindle microtubules, or metaphase alignment are mentioned, the cell is already inside mitosis at the spindle assembly checkpoint.

Trace the SAC Effector Pathway
  • An unattached kinetochore produces the Mitotic Checkpoint Complex (MCC, including Mad2 and BubR1), which sequesters Cdc20\text{Cdc20} and inhibits the APC/C\text{APC/C}. Relieving the block requires tension on all kinetochores, activating APC/CCdc20\text{APC/C}^{\text{Cdc20}} to destroy securin and cyclin B.

  • Associate Mad2, BubR1, and APC/C with the metaphase-to-anaphase transition, whereas Wee1, Cdc25, and CDK1-Cyclin B control the G2-to-M transition.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the current state: with spindle microtubules and kinetochores present, the cell is inside mitosis with chromosomes aligning at the metaphase plate.

  2. Conclude that a single unattached kinetochore arrests the cell at the prometaphase/metaphase boundary.

  3. Identify the blocked transition: active Mad2/BubR1 sequesters Cdc20\text{Cdc20}, blocking activation of the APC/C\text{APC/C} and halting the metaphase-to-anaphase transition.

  4. State the releasing threshold event: the final kinetochore must achieve amphitelic attachment under bipolar tension, silencing the SAC and activating APC/CCdc20\text{APC/C}^{\text{Cdc20}} to target securin for proteasomal degradation, freeing separase to cleave cohesin.

Final answer

(a) Prometaphase/Metaphase boundary (Metaphase arrest); (b) Metaphase-to-Anaphase transition; (c) Bipolar tension and attachment of the final kinetochore, SAC silencing, activation of APC/CCdc20\text{APC/C}^{\text{Cdc20}}, and degradation of securin to activate separase.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct physical triggers and molecular targets of the G1/S, G2/M, and spindle assembly checkpoints.

  • Practice mapping the molecular cascade of anaphase onset: kinetochore tension →\rightarrow SAC silencing →APC/CCdc20\rightarrow \text{APC/C}^{\text{Cdc20}} activation →\rightarrow securin destruction →\rightarrow separase activation →\rightarrow cohesin cleavage.

Lock it in

Similar question

01

A human somatic cell (2n=462n = 46) is treated with a low dose of nocodazole that prevents microtubule attachment to two kinetochores. Name: (1) the arrested mitotic phase, and (2) the protein complex whose activation is directly prevented.

Answer

(1) Metaphase arrest (prometaphase/metaphase boundary). (2) Anaphase-Promoting Complex/Cyclosome (APC/C, specifically APC/C-Cdc20). As long as any kinetochores are unattached, the MCC sequesters Cdc20, preventing APC/C activation and keeping the cell arrested before anaphase.

02

During mitosis, what specific substrate must be polyubiquitinated and degraded by the 26S proteasome to allow active separase to cleave cohesin rings?

Answer

Securin. Active APC/C-Cdc20 polyubiquitinates securin for destruction, releasing free and active separase to cleave the Scc1/Rad21 subunit of cohesin.

03

In a cell with a loss-of-function mutation in Mad2, explain what would happen if three chromosomes fail to attach to spindle microtubules during mitosis.

Answer

The cell would bypass the spindle assembly checkpoint, prematurely activating the APC/C and entering anaphase despite unattached chromosomes. This leads to non-disjunction, lagging chromosomes, and severe aneuploidy in the daughter cells.

Loading workspace…