Resources

An ecologist models an endangered herd of bighorn sheep in a protected national reserve using the logistic growth equation dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right), where the carrying capacity is K=500 individualsK = 500\text{ individuals} and the intrinsic rate of increase is r=0.280 year−1r = 0.280\text{ year}^{-1}. Rather than finding the total population size at time tt, calculate: (a) the population density NN at which the absolute population growth rate dNdt\frac{dN}{dt} reaches its theoretical maximum, and (b) the numerical value of this maximum growth rate (dNdt)max⁡\left(\frac{dN}{dt}\right)_{\max} in individuals⋅year−1\text{individuals}\cdot\text{year}^{-1}.

Answer and steps

Final answer

(a) N=250 individualsN = 250\text{ individuals}; (b) (dNdt)max⁡=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 35.0\text{ individuals}\cdot\text{year}^{-1}

Steps

01

Finding the Population Size NN for Maximum Growth Rate (Part a)

Understanding the Logistic Growth Model

The logistic differential equation models population growth under resource limitations: dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right) where:

  • NN is the population size (number of individuals),
  • r=0.280 year−1r = 0.280\text{ year}^{-1} is the intrinsic per capita growth rate,
  • K=500 individualsK = 500\text{ individuals} is the carrying capacity,
  • dNdt\frac{dN}{dt} is the absolute population growth rate (change in total population per unit time).

Expanding the right-hand side with respect to NN:

dNdt=rN−rKN2\frac{dN}{dt} = rN - \frac{r}{K}N^2

This expression is a quadratic function of NN that graphs as a downward-opening parabola:

  • The roots (points of zero growth) occur at N=0N = 0 and N=KN = K.
  • A quadratic curve is symmetric about its vertex. Therefore, the maximum value of dNdt\frac{dN}{dt} occurs halfway between the roots:

N=K2N = \frac{K}{2}

(Alternatively, setting the first derivative with respect to NN to zero gives ddN(dNdt)=r−2rNK=0  ⟹  N=K2\frac{d}{dN}\left(\frac{dN}{dt}\right) = r - \frac{2rN}{K} = 0 \implies N = \frac{K}{2}.)

Substitute K=500 individualsK = 500\text{ individuals}:

N=5002=250 individualsN = \frac{500}{2} = 250\text{ individuals}


02

Calculating the Maximum Growth Rate (dNdt)max⁡\left(\frac{dN}{dt}\right)_{\max} (Part b)

Substitute N=K2N = \frac{K}{2} back into the original growth equation:

(dNdt)max⁡=r(K2)(1−K/2K)=r(K2)(12)=rK4\left(\frac{dN}{dt}\right)_{\max} = r\left(\frac{K}{2}\right)\left(1 - \frac{K/2}{K}\right) = r\left(\frac{K}{2}\right)\left(\frac{1}{2}\right) = \frac{rK}{4}

Substitute the given numerical parameters into this formula:

(dNdt)max⁡=0.280 year−1×500 individuals4=1404=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = \frac{0.280\text{ year}^{-1} \times 500\text{ individuals}}{4} = \frac{140}{4} = 35.0\text{ individuals}\cdot\text{year}^{-1}


Common Pitfall to Avoid

Do not confuse the per capita growth rate 1NdNdt=r(1−NK)\frac{1}{N}\frac{dN}{dt} = r\left(1 - \frac{N}{K}\right) with the absolute population growth rate dNdt\frac{dN}{dt}:

  • Per capita growth rate is highest when NN is near 00 (approaching rr).
  • Absolute population growth rate depends on both per-individual reproduction and the number of breeding individuals, reaching its peak at the inflection point of the logistic S-curve, where N=K2N = \frac{K}{2}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the maximum population growth rate with the point where the population reaches carrying capacity, concluding that growth is maximized when N = K.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Population growth rate is maximum when population reaches carrying capacity.  ⟹  N=K=500 individuals\text{Population growth rate is maximum when population reaches carrying capacity.} \implies N = K = 500\text{ individuals}

    Correct

    N=K2=5002=250 individualsN = \frac{K}{2} = \frac{500}{2} = 250\text{ individuals}

    You assumed that the absolute growth rate is maximized when the population reaches its carrying capacity KK. In the logistic model dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right), the curve of growth rate versus population size is a downward-opening parabola with roots at N=0N = 0 and N=KN = K. Its vertex (maximum growth rate) occurs halfway between them at N=K2N = \frac{K}{2}.

  2. Step 2

    dNdt=rN(1−NK)=0.280×500×(1−500500)=0 individuals/year\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right) = 0.280 \times 500 \times \left(1 - \frac{500}{500}\right) = 0\text{ individuals/year}

    Correct

    (dNdt)max⁡=0.280×250×(1−250500)=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 0.280 \times 250 \times \left(1 - \frac{250}{500}\right) = 35.0\text{ individuals}\cdot\text{year}^{-1}

    You correctly substituted your chosen value of N=500N = 500 into the logistic equation and evaluated it accurately, but because N=500N = 500 was incorrect, your resulting growth rate was 00 instead of the true maximum.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote down the logistic growth differential equation.

You accurately substituted your chosen numerical values and evaluated the arithmetic to get 0 individuals/year0\text{ individuals/year}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Maximum Population Size with Maximum Growth Rate

You equated the maximum population size (N=KN = K) with the maximum population growth rate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating total population level NN with the rate of population change dNdt\frac{dN}{dt}. At carrying capacity KK, resources become limiting, competition is intense, and births equal deaths, so growth stops completely rather than peaking. Maximum absolute growth occurs at the inflection point of the sigmoid curve, which corresponds to N=K2N = \frac{K}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Population Size from Growth Rate
  • Carrying capacity KK is the equilibrium population size where net growth stops (dNdt=0\frac{dN}{dt} = 0). Maximum population growth rate occurs at half the carrying capacity (N=K2N = \frac{K}{2}).

  • When a problem asks for maximum growth rate, check whether your result makes sense: if your calculated growth rate is 00, you have found an equilibrium point, not a peak growth rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the logistic growth function dNdt=rN−rKN2\frac{dN}{dt} = rN - \frac{r}{K}N^2 is a downward-opening parabola with respect to NN.

  2. Find the vertex of the parabola, which occurs at N=K2=5002=250 individualsN = \frac{K}{2} = \frac{500}{2} = 250\text{ individuals}.

  3. Substitute N=250N = 250 into the logistic equation: (dNdt)max⁡=r(K2)(1−K/2K)=rK4\left(\frac{dN}{dt}\right)_{\max} = r\left(\frac{K}{2}\right)\left(1 - \frac{K/2}{K}\right) = \frac{rK}{4}.

  4. Compute the numerical value: (dNdt)max⁡=0.280×5004=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = \frac{0.280 \times 500}{4} = 35.0\text{ individuals}\cdot\text{year}^{-1}.

Final answer

(a) N=250 individualsN = 250\text{ individuals}; (b) (dNdt)max⁡=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 35.0\text{ individuals}\cdot\text{year}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the graphical relationship between the S-shaped logistic curve N(t)N(t) and the parabolic growth rate curve dNdt\frac{dN}{dt} versus NN.

  • Practice differentiating rate functions or finding parabola vertices to locate maximum values rather than relying on intuitive guesses.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the intrinsic per capita growth rate r with the maximum absolute population growth rate dN/dt, omitting the population size factor N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dN/dt is maximized at N=K2  ⟹  N=500/2=250 individualsdN/dt\text{ is maximized at }N = \frac{K}{2} \implies N = 500/2 = 250\text{ individuals}

  2. Step 2

    (dN/dt)max⁡=r⋅(1−NK)(dN/dt)_{\max} = r \cdot \left(1 - \frac{N}{K}\right)

    Correct

    (dNdt)max⁡=rN(1−NK)=rK4\left(\frac{dN}{dt}\right)_{\max} = rN\left(1 - \frac{N}{K}\right) = \frac{rK}{4}

    You wrote the per capita growth rate 1NdNdt=r(1−NK)\frac{1}{N}\frac{dN}{dt} = r\left(1 - \frac{N}{K}\right) instead of the total population growth rate dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right), omitting the factor of NN.

  3. Step 3

    (dN/dt)max⁡=0.280⋅(1−250500)  ⟹  (dN/dt)max⁡=0.280⋅0.5=0.14 individuals/year(dN/dt)_{\max} = 0.280 \cdot \left(1 - \frac{250}{500}\right) \implies (dN/dt)_{\max} = 0.280 \cdot 0.5 = 0.14\text{ individuals/year}

    Correct

    (dNdt)max⁡=0.280⋅250⋅(1−250500)=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 0.280 \cdot 250 \cdot \left(1 - \frac{250}{500}\right) = 35.0\text{ individuals}\cdot\text{year}^{-1}

    Your arithmetic was carried out accurately, but the result is off by a factor of N=250N = 250 because of the missing variable in your formula.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the logistic growth rate reaches its maximum at half the carrying capacity, N=K2N = \frac{K}{2}.

You substituted the carrying capacity K=500K = 500 accurately to find N=250 individualsN = 250\text{ individuals}.

You performed the final decimal arithmetic carefully and correctly for the expression you wrote.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of population size factor $N$ (confusing absolute vs. per capita rate)

You accidentally omitted the multiplier NN when evaluating dNdt\frac{dN}{dt} at N=250N = 250.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the absolute population growth rate dNdt\frac{dN}{dt} (total individuals added per year) with the per capita growth rate 1NdNdt\frac{1}{N}\frac{dN}{dt} (rate of increase per individual). While per capita growth is r(1−NK)r\left(1 - \frac{N}{K}\right), the total herd increase must be scaled by the number of breeding individuals NN.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of the growth rate
  • Absolute rate dNdt\frac{dN}{dt} has units of individuals/time\text{individuals}/\text{time}, whereas per capita rate 1NdNdt\frac{1}{N}\frac{dN}{dt} has units of 1/time1/\text{time}.

  • Always multiply the per capita term r(1−NK)r\left(1 - \frac{N}{K}\right) by the population size NN to find the total rate of population change.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete logistic growth formula: dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right).

  2. Substitute N=250N = 250, K=500K = 500, and r=0.280 year−1r = 0.280\text{ year}^{-1} into the equation.

  3. Calculate: (dNdt)max⁡=0.280×250×(1−250500)=70×0.5=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 0.280 \times 250 \times \left(1 - \frac{250}{500}\right) = 70 \times 0.5 = 35.0\text{ individuals}\cdot\text{year}^{-1}.

Final answer

(a) N=250 individualsN = 250\text{ individuals}; (b) (dNdt)max⁡=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 35.0\text{ individuals}\cdot\text{year}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between total population growth rate dNdt\frac{dN}{dt} and per capita growth rate 1NdNdt\frac{1}{N}\frac{dN}{dt}.

  • Memorize the shortcut formula for maximum logistic growth rate: (dNdt)max⁡=rK4\left(\frac{dN}{dt}\right)_{\max} = \frac{rK}{4}.

  • Use unit analysis as a quick sanity check: an absolute growth rate must contain individuals in the numerator.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly calculates the maximum rate using the formula rK/2 instead of rK/4 by failing to evaluate the term (1 - N/K) at N = K/2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Maximum growth rate occurs at inflection point  ⟹  N=K2  ⟹  N=5002=250 individuals\text{Maximum growth rate occurs at inflection point} \implies N = \frac{K}{2} \implies N = \frac{500}{2} = 250\text{ individuals}

  2. Step 2

    (dNdt)max⁡=r∗K2\left(\frac{dN}{dt}\right)_{\max} = r * \frac{K}{2}

    Correct

    (dNdt)max⁡=r(K2)(1−K/2K)=r(K2)(12)=rK4\left(\frac{dN}{dt}\right)_{\max} = r\left(\frac{K}{2}\right)\left(1 - \frac{K/2}{K}\right) = r\left(\frac{K}{2}\right)\left(\frac{1}{2}\right) = \frac{rK}{4}

    You substituted N=K2N = \frac{K}{2} into the exponential growth equation rNrN rather than the complete logistic equation rN(1−NK)rN\left(1 - \frac{N}{K}\right), omitting the resource limitation factor (1−NK)=12\left(1 - \frac{N}{K}\right) = \frac{1}{2}.

  3. Step 3

    (dNdt)max⁡=0.280∗250=70 individuals/year\left(\frac{dN}{dt}\right)_{\max} = 0.280 * 250 = 70\text{ individuals/year}

    Correct

    (dNdt)max⁡=0.280×5004=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = \frac{0.280 \times 500}{4} = 35.0\text{ individuals}\cdot\text{year}^{-1}

    Your arithmetic was accurate based on your formula, but the result is twice the correct value due to the missing factor of 12\frac{1}{2} in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the logistic growth rate reaches its peak at the inflection point where N=K2N = \frac{K}{2}.

You accurately evaluated the population size at maximum growth as N=250 individualsN = 250\text{ individuals}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted logistic damping term

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the exponential rate expression rNrN instead of substituting N=K2N = \frac{K}{2} into the full logistic differential equation rN(1−NK)rN\left(1 - \frac{N}{K}\right), neglecting the factor of 12\frac{1}{2} from environmental resistance.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logistic Equation Substitution
  • For logistic growth, dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right). At maximum growth (N=K2N = \frac{K}{2}), the growth rate is (dNdt)max⁡=r(K2)(1−12)=rK4\left(\frac{dN}{dt}\right)_{\max} = r\left(\frac{K}{2}\right)\left(1 - \frac{1}{2}\right) = \frac{rK}{4}.

  • Always substitute NN into both the NN term and the (1−NK)\left(1 - \frac{N}{K}\right) term of the logistic differential equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write out the full logistic equation: dNdt=rN(1−NK)\frac{dN}{dt} = rN\left(1 - \frac{N}{K}\right).

  2. Substitute N=K2N = \frac{K}{2} into both parts: (dNdt)max⁡=r(K2)(1−K/2K)=r(K2)(12)=rK4\left(\frac{dN}{dt}\right)_{\max} = r\left(\frac{K}{2}\right)\left(1 - \frac{K/2}{K}\right) = r\left(\frac{K}{2}\right)\left(\frac{1}{2}\right) = \frac{rK}{4}.

  3. Substitute the numerical values: (dNdt)max⁡=0.280×5004=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = \frac{0.280 \times 500}{4} = 35.0\text{ individuals}\cdot\text{year}^{-1}.

Final answer

(a) N=250 individualsN = 250\text{ individuals}; (b) (dNdt)max⁡=35.0 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = 35.0\text{ individuals}\cdot\text{year}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the maximum absolute growth formula for the logistic model as (dNdt)max⁡=rK4\left(\frac{dN}{dt}\right)_{\max} = \frac{rK}{4}, not rK2\frac{rK}{2}.

  • Practice deriving rK4\frac{rK}{4} by expanding dNdt=rN−rKN2\frac{dN}{dt} = rN - \frac{r}{K}N^2 and finding the vertex of the quadratic parabola.

Lock it in

Similar question

01

A population of trout in a lake follows the logistic equation with carrying capacity K=1200K = 1200 and intrinsic growth rate r=0.40 year−1r = 0.40\text{ year}^{-1}. Find (a) the population size NN at maximum growth rate and (b) the maximum absolute growth rate (dNdt)max⁡\left(\frac{dN}{dt}\right)_{\max}.

Answer

(a) Maximum growth rate occurs at N=K2=12002=600 individualsN = \frac{K}{2} = \frac{1200}{2} = 600\text{ individuals}.\n(b) (dNdt)max⁡=rK4=0.40×12004=120 individuals⋅year−1\left(\frac{dN}{dt}\right)_{\max} = \frac{rK}{4} = \frac{0.40 \times 1200}{4} = 120\text{ individuals}\cdot\text{year}^{-1}.

02

An isolated colony of yeast is grown in a bioreactor with carrying capacity K=8000 cells/mLK = 8000\text{ cells/mL}. At what population density does the per capita growth rate 1NdNdt\frac{1}{N}\frac{dN}{dt} reach its maximum, and how does this differ from the density for maximum absolute growth rate dNdt\frac{dN}{dt}?

Answer

The per capita growth rate is 1NdNdt=r(1−NK)\frac{1}{N}\frac{dN}{dt} = r\left(1 - \frac{N}{K}\right), which decreases linearly with NN and is maximized as N→0N \to 0 (approaching rr). In contrast, the absolute growth rate dNdt\frac{dN}{dt} accounts for total reproducing individuals as well as per capita rate, reaching its peak at N=K2=4000 cells/mLN = \frac{K}{2} = 4000\text{ cells/mL}.

03

A conservation manager wants to harvest a managed deer population following logistic growth to maintain the Maximum Sustainable Yield (MSY). If the maximum sustainable annual harvest equals the maximum biological growth rate of 45 deer/year45\text{ deer/year} and the population has an intrinsic growth rate r=0.30 year−1r = 0.30\text{ year}^{-1}, calculate the carrying capacity KK of the habitat.

Answer

At MSY, harvest rate equals (dNdt)max⁡=rK4\left(\frac{dN}{dt}\right)_{\max} = \frac{rK}{4}.\nSetting rK4=45\frac{rK}{4} = 45: K=4×45r=1800.30=600 deerK = \frac{4 \times 45}{r} = \frac{180}{0.30} = 600\text{ deer}.

Loading workspace…