Resources

An atmospheric monitoring station records an increase in atmospheric carbon dioxide (CO2\text{CO}_2) from an initial baseline of 315 ppm315\text{ ppm} to a modern concentration of 420 ppm420\text{ ppm}. Assuming that global radiative forcing ΔF\Delta F due to CO2\text{CO}_2 follows the canonical empirical relation ΔF=5.35⋅ln⁡(CC0) W/m2\Delta F = 5.35 \cdot \ln\left(\frac{C}{C_0}\right)\text{ W/m}^2, where C0C_0 is the initial concentration and CC is the altered concentration, calculate the radiative forcing ΔF\Delta F in W/m2\text{W/m}^2. Express your answer to three significant figures.

Answer and steps

Final answer

ΔF=1.54 W/m2\Delta F = 1.54\text{ W/m}^2

Steps

01

Identify Given Values and Formula

Understanding Radiative Forcing

Radiative forcing (ΔF\Delta F) measures the net change in the Earth's energy balance caused by a driver of climate change, such as an increase in greenhouse gas concentrations. A positive radiative forcing indicates that incoming solar energy exceeds outgoing infrared energy, leading to net warming of the climate system. Because the infrared absorption bands of carbon dioxide (COX2\ce{CO2}) become increasingly saturated as concentration grows, the relationship between concentration change and radiative forcing is logarithmic rather than linear.

  • Initial atmospheric concentration (C0C_0): 315 ppm315\text{ ppm}
  • Current atmospheric concentration (CC): 420 ppm420\text{ ppm}
  • Empirical relation: ΔF=5.35⋅ln⁡(CC0) W/m2\Delta F = 5.35 \cdot \ln\left(\frac{C}{C_0}\right)\text{ W/m}^2

02

Compute the Concentration Ratio

Divide the modern concentration by the baseline concentration:

CC0=420 ppm315 ppm=43≈1.3333\frac{C}{C_0} = \frac{420\text{ ppm}}{315\text{ ppm}} = \frac{4}{3} \approx 1.3333


03

Calculate the Natural Logarithm

Compute the natural logarithm of the concentration ratio:

ln⁡(43)≈0.28768\ln\left(\frac{4}{3}\right) \approx 0.28768

Common Pitfall: Be sure to use the natural logarithm (ln⁡\ln, base ee) rather than the common logarithm (log⁡10\log_{10}, base 1010), as the empirical coefficient 5.355.35 is specifically calibrated for the natural logarithm.


04

Calculate Radiative Forcing (ΔF\Delta F)

Substitute the logarithmic value into the formula:

ΔF=5.35⋅0.28768 W/m2≈1.5391 W/m2\Delta F = 5.35 \cdot 0.28768\text{ W/m}^2 \approx 1.5391\text{ W/m}^2

Rounding to three significant figures gives:

ΔF=1.54 W/m2\Delta F = 1.54\text{ W/m}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses common base-10 logarithm instead of the natural logarithm ln indicated in the formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔF=5.35⋅log⁡(CC0)\Delta F = 5.35 \cdot \log\left(\frac{C}{C_0}\right)

    Correct

    ΔF=5.35⋅ln⁡(CC0)\Delta F = 5.35 \cdot \ln\left(\frac{C}{C_0}\right)

    You wrote the empirical equation using the common logarithm log⁡\log (base 10) rather than the natural logarithm ln⁡\ln (base ee).

  2. Step 2

    CC0=420315≈1.333\frac{C}{C_0} = \frac{420}{315} \approx 1.333

  3. Step 3

    log⁡(1.333)≈0.1249\log(1.333) \approx 0.1249

    Correct

    ln⁡(1.333)≈0.2877\ln(1.333) \approx 0.2877

    You calculated log⁡10(1.333)≈0.1249\log_{10}(1.333) \approx 0.1249, which follows your Step 1 formula choice; using the natural logarithm yields ln⁡(1.333)≈0.2877\ln(1.333) \approx 0.2877.

  4. Step 4

    ΔF=5.35⋅0.1249≈0.668 W/m2\Delta F = 5.35 \cdot 0.1249 \approx 0.668\text{ W/m}^2

    Correct

    ΔF=5.35⋅0.2877≈1.54 W/m2\Delta F = 5.35 \cdot 0.2877 \approx 1.54\text{ W/m}^2

    You multiplied your logarithmic value correctly, but the resulting forcing is underestimated due to using log⁡10\log_{10} instead of ln⁡\ln.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and substituted the initial and altered CO2\text{CO}_2 concentrations.

You simplified the concentration ratio CC0\frac{C}{C_0} accurately.

You tracked your units and rounded to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithmic Base Confusion

You wrote log⁡\log instead of ln⁡\ln when copying down the empirical formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating log⁡\log and ln⁡\ln as interchangeable notations or pressing the 'log' button instead of the 'ln' button on a scientific calculator. The radiative forcing coefficient 5.35 W/m25.35\text{ W/m}^2 is calibrated specifically for the natural logarithm (base ee), which is approximately 2.3032.303 times larger than the common logarithm (base 10).

REASONING PATH
Your ACEpath teacher’s suggested approach
Natural vs. Common Logarithm
  • ln⁡(x)=log⁡e(x)\ln(x) = \log_e(x) whereas log⁡(x)=log⁡10(x)\log(x) = \log_{10}(x); ln⁡(x)=ln⁡(10)⋅log⁡10(x)≈2.3026⋅log⁡10(x)\ln(x) = \ln(10) \cdot \log_{10}(x) \approx 2.3026 \cdot \log_{10}(x).

  • Check whether the formula specifies ln⁡\ln or log⁡\log, and use the dedicated [LN]\text{[LN]} key on your calculator for natural logarithms.

Physical Reasonableness Check
  • A doubling of CO2\text{CO}_2 concentration (C/C0=2C/C_0 = 2) produces ΔF=5.35⋅ln⁡(2)≈3.71 W/m2\Delta F = 5.35 \cdot \ln(2) \approx 3.71\text{ W/m}^2.

  • Compare your calculated forcing to the standard ≈3.7 W/m2\approx 3.7\text{ W/m}^2 benchmark for doubling CO2\text{CO}_2 to verify that your scale is reasonable.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the natural logarithm of the concentration ratio: ln⁡(43)≈0.28768\ln\left(\frac{4}{3}\right) \approx 0.28768.

  2. Multiply by the empirical calibration factor: ΔF=5.35⋅0.28768 W/m2≈1.5391 W/m2\Delta F = 5.35 \cdot 0.28768\text{ W/m}^2 \approx 1.5391\text{ W/m}^2.

  3. Round the final value to three significant figures: ΔF=1.54 W/m2\Delta F = 1.54\text{ W/m}^2.

Final answer

ΔF=1.54 W/m2\Delta F = 1.54\text{ W/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between natural logs (ln⁡\ln, base ee) and common logs (log⁡\log, base 1010) on your calculator.

  • Practice converting between bases using the identity ln⁡(x)=ln⁡(10)⋅log⁡10(x)≈2.303⋅log⁡10(x)\ln(x) = \ln(10) \cdot \log_{10}(x) \approx 2.303 \cdot \log_{10}(x).

  • Recalculate greenhouse gas forcing problems to ensure you consistently apply ln⁡\ln.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio of concentrations, taking the baseline concentration over the modern concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔF=5.35⋅ln⁡(C0C)  ⟹  C0C=315420=0.75\Delta F = 5.35 \cdot \ln\left(\frac{C_0}{C}\right) \implies \frac{C_0}{C} = \frac{315}{420} = 0.75

    Correct

    ΔF=5.35⋅ln⁡(CC0)  ⟹  CC0=420315≈1.333\Delta F = 5.35 \cdot \ln\left(\frac{C}{C_0}\right) \implies \frac{C}{C_0} = \frac{420}{315} \approx 1.333

    You inverted the concentration ratio by placing the baseline concentration C0C_0 in the numerator and the modern concentration CC in the denominator. The empirical formula uses the ratio of current to initial concentration, CC0\frac{C}{C_0}.

  2. Step 2

    ln⁡(0.75)≈−0.2877\ln(0.75) \approx -0.2877

    Correct

    ln⁡(43)≈0.2877\ln\left(\frac{4}{3}\right) \approx 0.2877

    Your natural logarithm calculation was executed accurately for 0.750.75, but it inherited the inverted ratio from the previous step, resulting in a negative sign.

  3. Step 3

    ΔF=5.35⋅(−0.2877)≈−1.54 W/m2\Delta F = 5.35 \cdot (-0.2877) \approx -1.54\text{ W/m}^2

    Correct

    ΔF=5.35⋅0.2877≈1.54 W/m2\Delta F = 5.35 \cdot 0.2877 \approx 1.54\text{ W/m}^2

    You multiplied by the empirical coefficient 5.355.35 and rounded to three significant figures correctly, but because of the initial inversion, the final value has the wrong sign.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the logarithmic form of the empirical relationship for carbon dioxide radiative forcing.

You used the natural logarithm function rather than the common base-10 logarithm.

You evaluated arithmetic operations and rounded the final answer to three significant figures accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted argument in logarithmic formula

You swapped the numerator and denominator in the concentration ratio CC0\frac{C}{C_0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the order of the ratio inside the logarithm, placing the initial baseline C0C_0 over the current concentration CC. An increase in atmospheric greenhouse gas concentration traps additional outgoing infrared radiation, which physically must produce a positive radiative forcing (net warming). Evaluating C0C\frac{C_0}{C} when C>C0C > C_0 yields a value less than 11, causing the logarithm to turn negative and falsely indicating a cooling effect.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Physical Sign
  • An increase in greenhouse gas concentration (C>C0C > C_0) must yield ΔF>0\Delta F > 0, representing net energy entering the Earth system.

  • Always verify whether the gas is increasing or decreasing before calculating; if concentration rises, the ratio must exceed 11 so that its natural log is positive.

Formula Ratio Structure
  • The standard logarithmic formula compares the new state to the reference baseline: ratio=newbaseline=CC0\text{ratio} = \frac{\text{new}}{\text{baseline}} = \frac{C}{C_0}.

  • Write out the labels explicitly (C=420 ppmC = 420\text{ ppm}, C0=315 ppmC_0 = 315\text{ ppm}) before substituting them into the fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the concentration ratio with modern concentration CC over baseline C0C_0: CC0=420 ppm315 ppm=43≈1.3333\frac{C}{C_0} = \frac{420\text{ ppm}}{315\text{ ppm}} = \frac{4}{3} \approx 1.3333.

  2. Evaluate the natural logarithm: ln⁡(43)≈0.28768\ln\left(\frac{4}{3}\right) \approx 0.28768.

  3. Multiply by the empirical constant 5.355.35: ΔF=5.35⋅0.28768 W/m2≈1.5391 W/m2\Delta F = 5.35 \cdot 0.28768\text{ W/m}^2 \approx 1.5391\text{ W/m}^2.

Final answer

ΔF=1.54 W/m2\Delta F = 1.54\text{ W/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical meaning of positive versus negative radiative forcing in climate models.

  • Practice identifying the reference baseline concentration versus the altered concentration before plugging values into logarithmic expressions.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the logarithmic relationship as a simple linear relative change (C - C₀) / C₀ instead of evaluating ln(C / C₀).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔF=5.35⋅C−C0C0\Delta F = 5.35 \cdot \frac{C - C_0}{C_0}

    Correct

    ΔF=5.35⋅ln⁡(CC0)\Delta F = 5.35 \cdot \ln\left(\frac{C}{C_0}\right)

    You used the relative fractional increase C−C0C0\frac{C - C_0}{C_0} instead of the natural logarithm of the concentration ratio ln⁡(CC0)\ln\left(\frac{C}{C_0}\right).

  2. Step 2

    420−315315=105315≈0.3333\frac{420 - 315}{315} = \frac{105}{315} \approx 0.3333

    Correct

    CC0=420315=43≈1.3333  ⟹  ln⁡(43)≈0.2877\frac{C}{C_0} = \frac{420}{315} = \frac{4}{3} \approx 1.3333 \implies \ln\left(\frac{4}{3}\right) \approx 0.2877

    Your arithmetic evaluating 105315≈0.3333\frac{105}{315} \approx 0.3333 was correct, but this step computed the relative change rather than the natural logarithm of the concentration ratio.

  3. Step 3

    ΔF=5.35⋅0.3333≈1.78 W/m2\Delta F = 5.35 \cdot 0.3333 \approx 1.78\text{ W/m}^2

    Correct

    ΔF=5.35⋅0.28768 W/m2≈1.54 W/m2\Delta F = 5.35 \cdot 0.28768\text{ W/m}^2 \approx 1.54\text{ W/m}^2

    You multiplied your calculated factor by 5.355.35 correctly and rounded to three significant figures, but the numerical result was affected by the initial formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the baseline concentration C0=315 ppmC_0 = 315\text{ ppm} and the altered concentration C=420 ppmC = 420\text{ ppm}.

You performed accurate arithmetic and correctly rounded your result to three significant figures with proper units of W/m2\text{W/m}^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Misidentification (Linear vs. Logarithmic)

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the relative fractional change C−C0C0\frac{C - C_0}{C_0} in place of the natural logarithm ln⁡(CC0)\ln\left(\frac{C}{C_0}\right). In radiative physics, CO2\text{CO}_2 radiative forcing scales logarithmically because the central infrared absorption bands become increasingly saturated as gas concentration rises.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Verification
  • Radiative forcing for CO2\text{CO}_2 follows ΔF=5.35⋅ln⁡(CC0)\Delta F = 5.35 \cdot \ln\left(\frac{C}{C_0}\right).

  • Always compute the concentration ratio CC0\frac{C}{C_0} and apply the natural logarithm ln⁡\ln before multiplying by 5.355.35.

Logarithm vs. Relative Change
  • ln⁡(1+x)≈x\ln(1 + x) \approx x holds only when x=C−C0C0x = \frac{C - C_0}{C_0} is very close to 00; for finite changes, you must use the explicit ln⁡\ln function.

  • Do not substitute linear percentage or fractional change for logarithmic scaling in greenhouse gas forcing formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the concentration ratio: CC0=420315=43≈1.3333\frac{C}{C_0} = \frac{420}{315} = \frac{4}{3} \approx 1.3333

  2. Take the natural logarithm of this ratio: ln⁡(43)≈0.28768\ln\left(\frac{4}{3}\right) \approx 0.28768

  3. Multiply by the empirical constant: ΔF=5.35⋅0.28768≈1.5391 W/m2\Delta F = 5.35 \cdot 0.28768 \approx 1.5391\text{ W/m}^2

Final answer

ΔF=1.54 W/m2\Delta F = 1.54\text{ W/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical reason why CO2\text{CO}_2 forcing is logarithmic rather than linear (band saturation).

  • Practice computing radiative forcing for standard benchmark cases, such as a doubling of atmospheric CO2\text{CO}_2 concentration.

Lock it in

Similar question

01

Using the relation ΔF=5.35⋅ln⁡(C/C0) W/m2\Delta F = 5.35 \cdot \ln(C / C_0)\text{ W/m}^2, calculate the radiative forcing when atmospheric CO2\text{CO}_2 doubles from 280 ppm280\text{ ppm} to 560 ppm560\text{ ppm}. Express your answer to three significant figures.

Answer

ΔF=3.71 W/m2\Delta F = 3.71\text{ W/m}^2. Steps: CC0=560280=2\frac{C}{C_0} = \frac{560}{280} = 2. Then ln⁡(2)≈0.69315\ln(2) \approx 0.69315. Finally, ΔF=5.35⋅0.69315≈3.708≈3.71 W/m2\Delta F = 5.35 \cdot 0.69315 \approx 3.708 \approx 3.71\text{ W/m}^2.

02

Pre-industrial CO2\text{CO}_2 was approximately 280 ppm280\text{ ppm}. If the modern concentration reaches 415 ppm415\text{ ppm}, calculate the radiative forcing relative to pre-industrial levels to three significant figures using ΔF=5.35⋅ln⁡(C/C0)\Delta F = 5.35 \cdot \ln(C / C_0).

Answer

ΔF=2.10 W/m2\Delta F = 2.10\text{ W/m}^2. Steps: Ratio CC0=415280≈1.4821\frac{C}{C_0} = \frac{415}{280} \approx 1.4821. Natural log ln⁡(1.4821)≈0.39349\ln(1.4821) \approx 0.39349. Then ΔF=5.35⋅0.39349≈2.105 W/m2≈2.10 W/m2\Delta F = 5.35 \cdot 0.39349 \approx 2.105\text{ W/m}^2 \approx 2.10\text{ W/m}^2.

03

A climate model projects that a radiative forcing of ΔF=2.50 W/m2\Delta F = 2.50\text{ W/m}^2 will occur relative to a baseline of C0=300 ppmC_0 = 300\text{ ppm}. Using ΔF=5.35⋅ln⁡(C/C0)\Delta F = 5.35 \cdot \ln(C / C_0), determine the projected concentration CC in ppm\text{ppm} to three significant figures.

Answer

C=479 ppmC = 479\text{ ppm}. Steps: ln⁡(C/C0)=ΔF5.35=2.505.35≈0.46729\ln(C / C_0) = \frac{\Delta F}{5.35} = \frac{2.50}{5.35} \approx 0.46729. Exponentiate both sides: CC0=e0.46729≈1.5957\frac{C}{C_0} = e^{0.46729} \approx 1.5957. Multiply by C0C_0: C=300⋅1.5957≈478.7≈479 ppmC = 300 \cdot 1.5957 \approx 478.7 \approx 479\text{ ppm}.

Loading workspace…