Resources

An automated capillary electrophoresis system measures fluorescently tagged termination fragments for genomic sequencing. The baseline noise produces an electrophoretic relative fluorescence unit (RFU) signal of 45.0 RFU45.0\text{ RFU}. When evaluating a putative heterozygous deletion mutation where signal drop represents base loss, a junior technician records raw values of +120.0 RFU+120.0\text{ RFU} for allele 11 and +75.0 RFU+75.0\text{ RFU} for allele 22, but fails to subtract the instrument baseline noise before calculating the peak-to-peak ratio of variant to wild-type. Calculate the true, baseline-corrected ratio of (allele 22 / allele 11) and state the absolute percentage error caused by omitting baseline subtraction. Round both values to three significant figures.

Answer and steps

Final answer

True Ratio=0.400\text{True Ratio} = 0.400; Absolute Percentage Error=56.3%\text{Absolute Percentage Error} = 56.3\%

Steps

01

Calculate the baseline-corrected fluorescence for each allele

In capillary electrophoresis and automated Sanger sequencing, raw relative fluorescence unit (RFU\text{RFU}) measurements include non-specific background noise from the detector and optical system. To obtain the genuine biological signal, the baseline noise must be subtracted from each peak:

Corrected Signal=Raw Signal−Baseline Noise\text{Corrected Signal} = \text{Raw Signal} - \text{Baseline Noise}

  • Allele 1 (Wild-type): Allele 1true=120.0 RFU−45.0 RFU=75.0 RFU\text{Allele } 1_{\text{true}} = 120.0\text{ RFU} - 45.0\text{ RFU} = 75.0\text{ RFU}
  • Allele 2 (Variant): Allele 2true=75.0 RFU−45.0 RFU=30.0 RFU\text{Allele } 2_{\text{true}} = 75.0\text{ RFU} - 45.0\text{ RFU} = 30.0\text{ RFU}

02

Determine the true peak-to-peak ratio

Calculate the ratio of the baseline-subtracted variant allele to the wild-type allele:

True Ratio=Allele 2trueAllele 1true=30.0 RFU75.0 RFU=0.400\text{True Ratio} = \frac{\text{Allele } 2_{\text{true}}}{\text{Allele } 1_{\text{true}}} = \frac{30.0\text{ RFU}}{75.0\text{ RFU}} = 0.400


03

Determine the uncorrected (raw) ratio

When the technician omits baseline correction, the calculated ratio is:

Raw Ratio=Allele 2rawAllele 1raw=75.0 RFU120.0 RFU=0.625\text{Raw Ratio} = \frac{\text{Allele } 2_{\text{raw}}}{\text{Allele } 1_{\text{raw}}} = \frac{75.0\text{ RFU}}{120.0\text{ RFU}} = 0.625


04

Calculate the absolute percentage error

The absolute percentage error measures the magnitude of the discrepancy relative to the true accepted value:

Absolute Percentage Error=∣Raw Ratio−True Ratio∣True Ratio×100%\text{Absolute Percentage Error} = \frac{|\text{Raw Ratio} - \text{True Ratio}|}{\text{True Ratio}} \times 100\%

Substitute the values:

Absolute Percentage Error=∣0.625−0.400∣0.400×100%=0.2250.400×100%=56.25%\text{Absolute Percentage Error} = \frac{|0.625 - 0.400|}{0.400} \times 100\% = \frac{0.225}{0.400} \times 100\% = 56.25\%

Rounding to three significant figures yields:

Absolute Percentage Error=56.3%\text{Absolute Percentage Error} = 56.3\%

(Common Pitfall: A frequent error is dividing by the raw value rather than the true baseline-corrected reference value, or subtracting baseline noise after taking the ratio instead of before.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides by the experimental uncorrected ratio instead of the true theoretical baseline-corrected ratio when calculating percentage error, obtaining 36.0% instead of 56.3%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Allele 1=120.0−45.0=75.0 RFU  ⟹  Allele 2=75.0−45.0=30.0 RFU\text{Allele } 1 = 120.0 - 45.0 = 75.0\text{ RFU} \implies \text{Allele } 2 = 75.0 - 45.0 = 30.0\text{ RFU}

  2. Step 2

    True ratio=30.0/75.0=0.400\text{True ratio} = 30.0 / 75.0 = 0.400

  3. Step 3

    Raw ratio=75.0/120.0=0.625  ⟹  Absolute error=∣0.625−0.400∣=0.225\text{Raw ratio} = 75.0 / 120.0 = 0.625 \implies \text{Absolute error} = |0.625 - 0.400| = 0.225

  4. Step 4

    Percentage error=(0.225/0.625)×100%=36.0%\text{Percentage error} = (0.225 / 0.625) \times 100\% = 36.0\%

    Correct

    Absolute Percentage Error=∣0.625−0.400∣0.400×100%=56.3%\text{Absolute Percentage Error} = \frac{|0.625 - 0.400|}{0.400} \times 100\% = 56.3\%

    You divided the absolute difference by the uncorrected raw value (0.6250.625) instead of the true reference value (0.4000.400).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted instrument baseline noise to find true peak heights.

You accurately calculated both the true ratio and the raw ratio.

You correctly found the absolute difference between the two ratios.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Denominator in Percentage Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the base reference value in the percentage error formula by dividing by the uncorrected experimental value rather than the true baseline-corrected reference value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage Error Formula
  • Percentage Error=∣Experimental−True∣True×100%\text{Percentage Error} = \frac{|\text{Experimental} - \text{True}|}{\text{True}} \times 100\%

  • Always place the true (accepted, theoretical, or baseline-corrected) value in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the true reference ratio: True Ratio=0.400\text{True Ratio} = 0.400.

  2. Set up the relative error with the true value in the denominator: ∣0.625−0.400∣0.400=0.2250.400\frac{|0.625 - 0.400|}{0.400} = \frac{0.225}{0.400}.

  3. Convert to a percentage and round to three significant figures: 0.5625×100%=56.3%0.5625 \times 100\% = 56.3\%.

Final answer

True Ratio=0.400\text{True Ratio} = 0.400; Absolute Percentage Error=56.3%\text{Absolute Percentage Error} = 56.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the definition of percentage error: change relative to the accepted standard, not relative to the flawed measurement.

  • Double-check that the denominator represents the true/accepted baseline before calculating percentages.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the baseline noise from only one allele rather than both before computing the ratio, leading to an incorrect corrected ratio and percentage error.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Allele 1=120.0 RFU  ⟹  Allele 2=75.0−45.0=30.0 RFU\text{Allele } 1 = 120.0\text{ RFU} \implies \text{Allele } 2 = 75.0 - 45.0 = 30.0\text{ RFU}

    Correct

    Allele 1true=120.0−45.0=75.0 RFU  ⟹  Allele 2true=75.0−45.0=30.0 RFU\text{Allele } 1_{\text{true}} = 120.0 - 45.0 = 75.0\text{ RFU} \implies \text{Allele } 2_{\text{true}} = 75.0 - 45.0 = 30.0\text{ RFU}

    You subtracted the 45.0 RFU45.0\text{ RFU} baseline noise from allele 22, but you left allele 11 at its raw value of 120.0 RFU120.0\text{ RFU}. Baseline noise affects every electrophoretic channel/peak equally and must be subtracted from both peaks.

  2. Step 2

    True ratio=30.0120.0=0.250\text{True ratio} = \frac{30.0}{120.0} = 0.250

    Correct

    True ratio=30.075.0=0.400\text{True ratio} = \frac{30.0}{75.0} = 0.400

    Because you did not correct allele 11 for baseline noise in Step 1, your denominator was 120.0 RFU120.0\text{ RFU} instead of 75.0 RFU75.0\text{ RFU}.

  3. Step 3

    Raw ratio=75.0120.0=0.625\text{Raw ratio} = \frac{75.0}{120.0} = 0.625

  4. Step 4

    Percentage error=(∣0.625−0.250∣0.250)∗100%=150%\text{Percentage error} = \left(\frac{|0.625 - 0.250|}{0.250}\right) * 100\% = 150\%

    Correct

    Percentage error=∣0.625−0.400∣0.400×100%=56.3%\text{Percentage error} = \frac{|0.625 - 0.400|}{0.400} \times 100\% = 56.3\%

    Your formula structure for relative percentage error is correct, but using the incorrect true ratio (0.2500.250 instead of 0.4000.400) propagated into the final result.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that background baseline noise must be subtracted to find true fluorescence signal.

You correctly subtracted the baseline noise from allele 22.

You correctly calculated the uncorrected raw ratio as 0.6250.625.

You correctly applied the relative percentage error formula relative to your calculated true value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of baseline correction on reference channel

You subtracted the instrument baseline noise from allele 22, but kept the raw signal for allele 11.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated allele 11 as a fixed reference standard rather than an instrument-derived raw fluorescence reading that carries the same additive detector noise as allele 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply Background Correction Uniformly
  • Instrument background and optical noise offset all peak heights equally across an electropherogram.

  • Subtract baseline noise from every measured raw peak before calculating any ratio or normalization.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Allele 1true=120.0 RFU−45.0 RFU=75.0 RFU\text{Allele } 1_{\text{true}} = 120.0\text{ RFU} - 45.0\text{ RFU} = 75.0\text{ RFU}

  2. True Ratio=Allele 2trueAllele 1true=30.0 RFU75.0 RFU=0.400\text{True Ratio} = \frac{\text{Allele } 2_{\text{true}}}{\text{Allele } 1_{\text{true}}} = \frac{30.0\text{ RFU}}{75.0\text{ RFU}} = 0.400

  3. Absolute Percentage Error=∣0.625−0.400∣0.400×100%=0.2250.400×100%=56.3%\text{Absolute Percentage Error} = \frac{|0.625 - 0.400|}{0.400} \times 100\% = \frac{0.225}{0.400} \times 100\% = 56.3\%

Final answer

True Ratio=0.400\text{True Ratio} = 0.400; Absolute Percentage Error=56.3%\text{Absolute Percentage Error} = 56.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check off baseline subtraction for every peak (wild-type and variant alike) before computing peak area or height ratios.

  • Verify that the percentage error calculation uses the fully corrected true value in the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the requested ratio as allele 1 over allele 2, resulting in an inverted true ratio of 2.50 and percentage error of 36.0%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Allele 1=120.0−45.0=75.0 RFU  ⟹  Allele 2=75.0−45.0=30.0 RFU\text{Allele } 1 = 120.0 - 45.0 = 75.0\text{ RFU} \implies \text{Allele } 2 = 75.0 - 45.0 = 30.0\text{ RFU}

  2. Step 2

    True ratio=75.0/30.0=2.50\text{True ratio} = 75.0 / 30.0 = 2.50

    Correct

    True ratio=Allele 2Allele 1=30.0 RFU75.0 RFU=0.400\text{True ratio} = \frac{\text{Allele } 2}{\text{Allele } 1} = \frac{30.0\text{ RFU}}{75.0\text{ RFU}} = 0.400

    The prompt specified the ratio of (allele 2/allele 1)(\text{allele } 2 / \text{allele } 1), but you placed allele 11 in the numerator and allele 22 in the denominator.

  3. Step 3

    Raw ratio=120.0/75.0=1.60  ⟹  Percentage error=(∣1.60−2.50∣/2.50)×100%=36.0%\text{Raw ratio} = 120.0 / 75.0 = 1.60 \implies \text{Percentage error} = (|1.60 - 2.50| / 2.50) \times 100\% = 36.0\%

    Correct

    Raw ratio=75.0 RFU120.0 RFU=0.625  ⟹  Percentage error=∣0.625−0.400∣0.400×100%=56.3%\text{Raw ratio} = \frac{75.0\text{ RFU}}{120.0\text{ RFU}} = 0.625 \implies \text{Percentage error} = \frac{|0.625 - 0.400|}{0.400} \times 100\% = 56.3\%

    Your percentage error formula was applied correctly to your values, but the result was distorted by using the inverted ratios.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that instrument background noise must be subtracted before evaluating true peak heights.

You used the standard absolute percentage error formula relating experimental and theoretical values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Ratio Orientation

You set up the ratio upside down as allele 1/allele 2\text{allele } 1 / \text{allele } 2 instead of (allele 2/allele 1)(\text{allele } 2 / \text{allele } 1) as specified in the prompt.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the explicit numerator-to-denominator orientation requested in the prompt, often caused by reflexively dividing the larger number by the smaller number to obtain a value greater than 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Ratio Orientation
  • When a problem defines a ratio as (A/B)(A / B) or 'AA to BB', term AA must be in the numerator and term BB must be in the denominator.

  • Always write down the named fraction with labels (e.g., variantwild-type\frac{\text{variant}}{\text{wild-type}}) before substituting numeric values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio according to the prompt: True Ratio=Allele 2trueAllele 1true=30.0 RFU75.0 RFU=0.400\text{True Ratio} = \frac{\text{Allele } 2_{\text{true}}}{\text{Allele } 1_{\text{true}}} = \frac{30.0\text{ RFU}}{75.0\text{ RFU}} = 0.400.

  2. Compute the uncorrected raw ratio using the same orientation: Raw Ratio=Allele 2rawAllele 1raw=75.0 RFU120.0 RFU=0.625\text{Raw Ratio} = \frac{\text{Allele } 2_{\text{raw}}}{\text{Allele } 1_{\text{raw}}} = \frac{75.0\text{ RFU}}{120.0\text{ RFU}} = 0.625.

  3. Calculate the absolute percentage error relative to the true value: Percentage Error=∣0.625−0.400∣0.400×100%=0.2250.400×100%=56.25%\text{Percentage Error} = \frac{|0.625 - 0.400|}{0.400} \times 100\% = \frac{0.225}{0.400} \times 100\% = 56.25\%.

  4. Round both values to three significant figures: True Ratio=0.400\text{True Ratio} = 0.400, Absolute Percentage Error=56.3%\text{Absolute Percentage Error} = 56.3\%.

Final answer

True Ratio=0.400\text{True Ratio} = 0.400; Absolute Percentage Error=56.3%\text{Absolute Percentage Error} = 56.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check which quantity belongs in the numerator before calculating ratios.

  • Remember that ratios in biology can frequently be less than 1.01.0, especially when comparing a deletion or drop in signal against a normal wild-type peak.

Lock it in

Similar question

01

A Sanger sequencing trace has a baseline noise of 20.0 RFU20.0\text{ RFU}. An insertion allele yields a raw peak of 140.0 RFU140.0\text{ RFU} and the wild-type allele yields a raw peak of 220.0 RFU220.0\text{ RFU}. Calculate the true baseline-corrected ratio of (insertion / wild-type) to three significant figures.

Answer

True Ratio=0.600\text{True Ratio} = 0.600. True insertion signal =140.0−20.0=120.0 RFU= 140.0 - 20.0 = 120.0\text{ RFU}; True wild-type signal =220.0−20.0=200.0 RFU= 220.0 - 20.0 = 200.0\text{ RFU}; Ratio=120.0200.0=0.600\text{Ratio} = \frac{120.0}{200.0} = 0.600.

02

In a quantitative genomic PCR assay, the accepted true copy-number ratio of gene XX to reference gene YY is 0.5000.500. An analyst without baseline calibration calculates a raw ratio of 0.6500.650. Calculate the absolute percentage error in the analyst's reported ratio.

Answer

Absolute Percentage Error=30.0%\text{Absolute Percentage Error} = 30.0\%. Percentage Error=∣0.650−0.500∣0.500×100%=0.1500.500×100%=30.0%\text{Percentage Error} = \frac{|0.650 - 0.500|}{0.500} \times 100\% = \frac{0.150}{0.500} \times 100\% = 30.0\%.

03

An electrophoretic capillary detector measures two DNA peaks with raw heights of 90.0 RFU90.0\text{ RFU} and 60.0 RFU60.0\text{ RFU}. If the baseline noise is 30.0 RFU30.0\text{ RFU}, calculate: (a) the true ratio of peak 2 to peak 1, (b) the uncorrected raw ratio, and (c) the absolute percentage error resulting from omitting baseline subtraction.

Answer

(a) True ratio =60.0−30.090.0−30.0=30.060.0=0.500= \frac{60.0 - 30.0}{90.0 - 30.0} = \frac{30.0}{60.0} = 0.500. (b) Raw ratio =60.090.0=0.667= \frac{60.0}{90.0} = 0.667. (c) Absolute percentage error =∣0.667−0.500∣0.500×100%=33.3%= \frac{|0.667 - 0.500|}{0.500} \times 100\% = 33.3\%.

Loading workspace…