Resources

A clinical biochemistry laboratory measures the activity of serum lactate dehydrogenase (LDH), which catalyzes the reaction: Pyruvate+NADH+H+⇌Lactate+NAD+\text{Pyruvate} + \text{NADH} + \text{H}^+ \rightleftharpoons \text{Lactate} + \text{NAD}^+. A 100.0 μL100.0\,\mu\text{L} aliquot of patient serum is added to a cuvette containing buffer and pyruvate to yield a total assay volume of 3.00 mL3.00\text{ mL}. The initial concentration of NADH is prepared by dissolving 0.426 mg0.426\text{ mg} of NADH disodium salt (molar mass =709.4 g/mol= 709.4\text{ g/mol}) directly into the 3.00 mL3.00\text{ mL} reaction mixture. Over a 5.00-minute5.00\text{-minute} incubation at 25∘C25^{\circ}\text{C}, the concentration of NADH decreases by 45.0 μM45.0\,\mu\text{M}. (a) Calculate the initial concentration of NADH in the cuvette in units of mmol/L\text{mmol/L} (mM). (b) Express the rate of NADH consumption in the total assay mixture in units of μmol/min\mu\text{mol/min}.

Answer and steps

Final answer

(a) [NADH]0=0.200 mmol/L[\text{NADH}]_0 = 0.200\text{ mmol/L} (or 0.200 mM0.200\text{ mM}); (b) Rate=0.0270 μmol/min\text{Rate} = 0.0270\,\mu\text{mol/min}

Steps

Part (a): Initial Concentration of NADH

  1. Calculate the amount of NADH dissolved in moles: The number of moles (nn) is determined from the mass (mm) and the molar mass (MM) of the NADH disodium salt: n=mM=0.426×10−3 g709.4 g/mol≈6.005×10−7 moln = \frac{m}{M} = \frac{0.426 \times 10^{-3}\text{ g}}{709.4\text{ g/mol}} \approx 6.005 \times 10^{-7}\text{ mol}
  2. Convert the total assay volume to liters: V=3.00 mL=3.00×10−3 LV = 3.00\text{ mL} = 3.00 \times 10^{-3}\text{ L}
  3. Determine the molar concentration: Molarity (CC) is the amount of solute per unit volume: [NADH]0=nV=6.005×10−7 mol3.00×10−3 L=2.002×10−4 mol/L[\ce{NADH}]_0 = \frac{n}{V} = \frac{6.005 \times 10^{-7}\text{ mol}}{3.00 \times 10^{-3}\text{ L}} = 2.002 \times 10^{-4}\text{ mol/L}
  4. Convert to mmol/L\text{mmol/L} (mM\text{mM}): [NADH]0=2.002×10−4 mol/L×103 mmol/mol≈0.200 mmol/L (or 0.200 mM)[\ce{NADH}]_0 = 2.002 \times 10^{-4}\text{ mol/L} \times 10^3\text{ mmol/mol} \approx 0.200\text{ mmol/L}\text{ (or } 0.200\text{ mM)}

Part (b): Rate of NADH Consumption in the Total Assay Mixture

  1. Calculate the rate of concentration decrease: The concentration change over the 5.00-minute5.00\text{-minute} interval is Δ[NADH]=45.0 μM\Delta [\ce{NADH}] = 45.0\ \mu\text{M}: Rate of concentration change=Δ[NADH]Δt=45.0 μM5.00 min=9.00 μM/min=9.00 μmol/(L⋅min)\text{Rate of concentration change} = \frac{\Delta [\ce{NADH}]}{\Delta t} = \frac{45.0\ \mu\text{M}}{5.00\text{ min}} = 9.00\ \mu\text{M/min} = 9.00\ \mu\text{mol}/(\text{L}\cdot\text{min})
  2. Convert the concentration rate to the total substance consumption rate: To find the rate of consumption across the entire cuvette rather than per liter, multiply by the total assay volume (V=3.00 mL=0.00300 LV = 3.00\text{ mL} = 0.00300\text{ L}): Rate=9.00 μmol/(L⋅min)×0.00300 L=0.0270 μmol/min\text{Rate} = 9.00\ \mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00300\text{ L} = 0.0270\ \mu\text{mol/min}

Common Pitfall: A common mistake is reporting the rate per unit volume (9.00 μM/min9.00\ \mu\text{M/min}) rather than the absolute rate of consumption across the entire reaction volume (0.0270 μmol/min0.0270\ \mu\text{mol/min}). Always verify whether the requested rate unit contains a volume dimension (such as μM/min\mu\text{M/min}) or denotes absolute molar quantity per unit time (such as μmol/min\mu\text{mol/min}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the concentration change rate by the total cuvette volume, reporting the rate per liter (μmol/(L*min) or μM/min) instead of the total rate in μmol/min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NADH)=0.426 mg709.4 g/mol=6.005×10−4 mmol  ⟹  [NADH]=6.005×10−4 mmol0.00300 L=0.200 mMn(\text{NADH}) = \frac{0.426\text{ mg}}{709.4\text{ g/mol}} = 6.005 \times 10^{-4}\text{ mmol} \implies [\text{NADH}] = \frac{6.005 \times 10^{-4}\text{ mmol}}{0.00300\text{ L}} = 0.200\text{ mM}

  2. Step 2

    Δ[NADH]Δt=45.0 μM5.00 min=9.00 μM/min\frac{\Delta [\text{NADH}]}{\Delta t} = \frac{45.0\,\mu\text{M}}{5.00\text{ min}} = 9.00\,\mu\text{M/min}

  3. Step 3

    Rate=9.00 μmol/min\text{Rate} = 9.00\,\mu\text{mol/min}

    Correct

    Rate=9.00 μmol/(L⋅min)×0.00300 L=0.0270 μmol/min\text{Rate} = 9.00\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00300\text{ L} = 0.0270\,\mu\text{mol/min}

    You equated μM/min\mu\text{M/min} directly to μmol/min\mu\text{mol/min}. Because 1 μM=1 μmol/L1\,\mu\text{M} = 1\,\mu\text{mol/L}, you must multiply by the total assay volume in liters (0.00300 L0.00300\text{ L}) to obtain the total consumption rate across the entire cuvette.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the amount of NADH in millimoles and converted it into the initial molar concentration (0.200 mM0.200\text{ mM}).

You correctly computed the rate of concentration change over time as 9.00 μM/min9.00\,\mu\text{M/min}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Total Volume in Rate Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the volumetric concentration rate (μM/min=μmol/(L⋅min)\mu\text{M/min} = \mu\text{mol}/(\text{L}\cdot\text{min})) as equivalent to the total substance consumption rate (μmol/min\mu\text{mol/min}), overlooking that concentration must be multiplied by total reaction volume (VV) to yield the total amount of solute reacted per unit time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Rate Units
  • Concentration rate=Δ[S]Δt (units: μmol/(L⋅min))\text{Concentration rate} = \frac{\Delta [\text{S}]}{\Delta t}\text{ (units: } \mu\text{mol}/(\text{L}\cdot\text{min})\text{)}, whereas Total rate=ΔnΔt=Δ[S]Δt×V (units: μmol/min)\text{Total rate} = \frac{\Delta n}{\Delta t} = \frac{\Delta [\text{S}]}{\Delta t} \times V\text{ (units: } \mu\text{mol/min}\text{)}.

  • Always verify whether the requested rate unit contains a volume dimension (e.g., L−1\text{L}^{-1}) or represents total substance per minute; if it lacks a volume term, multiply by the assay volume in liters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the concentration change rate by the total cuvette volume in liters (V=3.00 mL=0.00300 LV = 3.00\text{ mL} = 0.00300\text{ L}): Rate=9.00 μmol/(L⋅min)×0.00300 L\text{Rate} = 9.00\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00300\text{ L}.

  2. Compute the final value: 9.00×0.00300=0.0270 μmol/min9.00 \times 0.00300 = 0.0270\,\mu\text{mol/min}.

Final answer

(a) [NADH]0=0.200 mmol/L[\text{NADH}]_0 = 0.200\text{ mmol/L} (or 0.200 mM0.200\text{ mM}); (b) Rate=0.0270 μmol/min\text{Rate} = 0.0270\,\mu\text{mol/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out compound units explicitly (e.g., write μM\mu\text{M} as μmol/L\mu\text{mol/L}) to immediately spot missing dimensional factors.

  • Review enzyme activity units (Units, U=μmol/min\text{U} = \mu\text{mol/min}) to ensure you consistently scale from cuvette concentration changes to total volume activity.

OverviewACEpath Teacher's Diagnosis

02 The student uses the serum sample volume (100.0 μL) instead of the total assay mixture volume (3.00 mL) to convert concentration change into total micromoles consumed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=0.426×10−3 g/709.4 g/mol=6.005×10−7 moln = 0.426 \times 10^{-3}\text{ g} / 709.4\text{ g/mol} = 6.005 \times 10^{-7}\text{ mol}

  2. Step 2

    [NADH]=6.005×10−7 mol/0.00300 L=0.200 mM[\text{NADH}] = 6.005 \times 10^{-7}\text{ mol} / 0.00300\text{ L} = 0.200\text{ mM}

  3. Step 3

    Rate=(45.0 μmol/L5.00 min)×0.000100 L  ⟹  Rate=9.00×0.000100=0.000900 μmol/min\text{Rate} = \left(\frac{45.0\,\mu\text{mol/L}}{5.00\text{ min}}\right) \times 0.000100\text{ L} \implies \text{Rate} = 9.00 \times 0.000100 = 0.000900\,\mu\text{mol/min}

    Correct

    Rate=(45.0 μmol/L5.00 min)×0.00300 L=9.00 μmol/(L⋅min)×0.00300 L=0.0270 μmol/min\text{Rate} = \left(\frac{45.0\,\mu\text{mol/L}}{5.00\text{ min}}\right) \times 0.00300\text{ L} = 9.00\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00300\text{ L} = 0.0270\,\mu\text{mol/min}

    The concentration change occurred throughout the entire 3.00 mL3.00\text{ mL} assay mixture, not just within the 100.0 μL100.0\,\mu\text{L} serum sample aliquot. Multiplying by Vtotal=0.00300 LV_{\text{total}} = 0.00300\text{ L} yields the total micromoles consumed per minute across the whole reaction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass of NADH salt into moles using its molar mass.

You correctly computed the initial millimolar concentration using the total assay volume of 3.00 mL3.00\text{ mL}.

You recognized that converting concentration change per unit time (μM/min\mu\text{M/min}) into an absolute rate (μmol/min\mu\text{mol/min}) requires multiplying by volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Volume in Amount Conversion

You selected the sample aliquot volume (100.0 μL=0.000100 L100.0\,\mu\text{L} = 0.000100\text{ L}) rather than the total cuvette mixture volume (3.00 mL=0.00300 L3.00\text{ mL} = 0.00300\text{ L}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the aliquot volume of the biological sample with the total assay reaction volume when converting volumetric concentration changes (Δ[C]/Δt\Delta [C]/\Delta t) into total substance changes (Δn/Δt\Delta n/\Delta t).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify where the reaction occurs
  • A spectrophotometric concentration change ΔC\Delta C is measured across the total cuvette volume VassayV_{\text{assay}}.

  • Always multiply by the total mixture volume in the cuvette when calculating total moles consumed per unit time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the rate of concentration change: 45.0 μM5.00 min=9.00 μmol/(L⋅min)\frac{45.0\,\mu\text{M}}{5.00\text{ min}} = 9.00\,\mu\text{mol}/(\text{L}\cdot\text{min}).

  2. Identify the total reaction volume containing the reacting species: Vtotal=3.00 mL=0.00300 LV_{\text{total}} = 3.00\text{ mL} = 0.00300\text{ L}.

  3. Multiply the volumetric rate by the total assay volume: Rate=9.00 μmol/(L⋅min)×0.00300 L=0.0270 μmol/min\text{Rate} = 9.00\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00300\text{ L} = 0.0270\,\mu\text{mol/min}.

Final answer

(a) [NADH]0=0.200 mM[\text{NADH}]_0 = 0.200\text{ mM}; (b) Rate=0.0270 μmol/min\text{Rate} = 0.0270\,\mu\text{mol/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check which volume corresponds to where the substance is dissolved versus where the enzyme sample originates.

  • Verify dimensional units carefully: μmol/min=[μmol/(L⋅min)]×Ltotal reaction\mu\text{mol/min} = [\mu\text{mol}/(\text{L}\cdot\text{min})] \times \text{L}_{\text{total reaction}}.

OverviewACEpath Teacher's Diagnosis

03 The student misplaces the milligram-to-gram metric conversion factor by multiplying by 1000 instead of dividing, overestimating initial concentration by six orders of magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    0.426 mg=426 g0.426\text{ mg} = 426\text{ g}

    Correct

    0.426 mg=0.426×10−3 g=4.26×10−4 g0.426\text{ mg} = 0.426 \times 10^{-3}\text{ g} = 4.26 \times 10^{-4}\text{ g}

    You multiplied by 10001000 instead of dividing by 10001000. Because 1 g=1000 mg1\text{ g} = 1000\text{ mg}, converting from milligrams to grams requires multiplying by 10−3 g/mg10^{-3}\text{ g/mg}.

  2. Step 2

    moles=426 g709.4 g/mol=0.601 mol  ⟹  [NADH]=0.601 mol0.00300 L=200 mM\text{moles} = \frac{426\text{ g}}{709.4\text{ g/mol}} = 0.601\text{ mol} \implies [\text{NADH}] = \frac{0.601\text{ mol}}{0.00300\text{ L}} = 200\text{ mM}

    Correct

    n=4.26×10−4 g709.4 g/mol≈6.005×10−7 mol  ⟹  [NADH]0=6.005×10−7 mol0.00300 L=2.00×10−4 mol/L=0.200 mMn = \frac{4.26 \times 10^{-4}\text{ g}}{709.4\text{ g/mol}} \approx 6.005 \times 10^{-7}\text{ mol} \implies [\text{NADH}]_0 = \frac{6.005 \times 10^{-7}\text{ mol}}{0.00300\text{ L}} = 2.00 \times 10^{-4}\text{ mol/L} = 0.200\text{ mM}

    Your formula setup was sound, but substituting the incorrect mass propagated into an overstated mole quantity and initial concentration.

  3. Step 3

    Δn=45.0 μmol/L×0.00300 L=0.135 μmol  ⟹  Rate=0.135 μmol5.00 min=0.0270 μmol/min\Delta n = 45.0\,\mu\text{mol/L} \times 0.00300\text{ L} = 0.135\,\mu\text{mol} \implies \text{Rate} = \frac{0.135\,\mu\text{mol}}{5.00\text{ min}} = 0.0270\,\mu\text{mol/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the rate of consumption across the total assay mixture requires multiplying concentration by volume.

You set up the relationship between mass, molar mass, and molar concentration accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric Prefix Inversion

You multiplied by 10310^3 instead of 10−310^{-3} when converting from milligrams to grams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating prefix directionality when moving from a smaller metric unit (milligram) to a base unit (gram), treating milli- as a multiplier (10310^3) rather than a submultiple (10−310^{-3}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Directionality Check
  • When moving from a smaller prefixed unit to a larger base unit, the numerical value must decrease: smaller unit→larger unit  ⟹  divide by conversion factor\text{smaller unit} \rightarrow \text{larger unit} \implies \text{divide by conversion factor}.

  • Write out conversion factors with explicit canceling units: 0.426 mg×1 g1000 mg=4.26×10−4 g0.426\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 4.26 \times 10^{-4}\text{ g}.

Reasonableness Check for Biochemical Masses
  • A clinical cuvette of 3 mL3\text{ mL} contains milligrams or micrograms of solute; 426 g426\text{ g} of reagent would be nearly a pound of powder.

  • Pause before dividing by molar mass to check whether the calculated gram value matches laboratory reality.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. m=0.426 mg×10−3 g/mg=4.26×10−4 gm = 0.426\text{ mg} \times 10^{-3}\text{ g/mg} = 4.26 \times 10^{-4}\text{ g}

  2. n=4.26×10−4 g709.4 g/mol=6.005×10−7 moln = \frac{4.26 \times 10^{-4}\text{ g}}{709.4\text{ g/mol}} = 6.005 \times 10^{-7}\text{ mol}

  3. [NADH]0=6.005×10−7 mol0.00300 L=2.002×10−4 mol/L[\text{NADH}]_0 = \frac{6.005 \times 10^{-7}\text{ mol}}{0.00300\text{ L}} = 2.002 \times 10^{-4}\text{ mol/L}

  4. [NADH]0=2.002×10−4 mol/L×103 mmol/mol=0.200 mM[\text{NADH}]_0 = 2.002 \times 10^{-4}\text{ mol/L} \times 10^3\text{ mmol/mol} = 0.200\text{ mM}

Final answer

(a) [NADH]0=0.200 mM[\text{NADH}]_0 = 0.200\text{ mM}; (b) Rate=0.0270 μmol/min\text{Rate} = 0.0270\,\mu\text{mol/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write unit fractions (dimensional analysis) explicitly so units cancel visually.

  • Perform a sanity check on reagent masses and concentrations before carrying them through multistep enzyme assay calculations.

Lock it in

Similar question

01

A spectrophotometric assay with a total volume of 1.00 mL1.00\text{ mL} monitors the oxidation of NADPH at 340 nm340\text{ nm}. Over a 2.00-minute2.00\text{-minute} period, the concentration of NADPH decreases by 30.0 μM30.0\,\mu\text{M}. Calculate the rate of NADPH consumption in the total assay mixture in units of μmol/min\mu\text{mol/min}.

Answer

Rate=0.0150 μmol/min\text{Rate} = 0.0150\,\mu\text{mol/min}. Key steps: (1) Volumetric rate =30.0 μM/2.00 min=15.0 μM/min=15.0 μmol/(L⋅min)= 30.0\,\mu\text{M} / 2.00\text{ min} = 15.0\,\mu\text{M/min} = 15.0\,\mu\text{mol}/(\text{L}\cdot\text{min}). (2) Total rate =15.0 μmol/(L⋅min)×0.00100 L=0.0150 μmol/min= 15.0\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00100\text{ L} = 0.0150\,\mu\text{mol/min}.

02

In an alkaline phosphatase assay, 50.0 μL50.0\,\mu\text{L} of enzyme solution is mixed with substrate buffer to a total volume of 2.50 mL2.50\text{ mL}. The reaction produces p-nitrophenolp\text{-nitrophenol} such that its concentration increases by 0.120 mM0.120\text{ mM} during a 4.00-minute4.00\text{-minute} incubation. (a) Determine the rate of concentration change in μM/min\mu\text{M/min}. (b) Calculate the total activity of the enzyme in the cuvette in μmol/min\mu\text{mol/min} (Units).

Answer

(a) 30.0 μM/min30.0\,\mu\text{M/min}; (b) 0.0750 μmol/min0.0750\,\mu\text{mol/min}. Key steps: (a) Δ[P]/Δt=(0.120 mM×103 μM/mM)/4.00 min=30.0 μM/min\Delta [P] / \Delta t = (0.120\text{ mM} \times 10^3\,\mu\text{M/mM}) / 4.00\text{ min} = 30.0\,\mu\text{M/min}. (b) Total activity =30.0 μmol/(L⋅min)×0.00250 L=0.0750 μmol/min= 30.0\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00250\text{ L} = 0.0750\,\mu\text{mol/min}.

03

A researcher determines the initial velocity of an enzyme in a 3.00 mL3.00\text{ mL} reaction cuvette. Using an extinction coefficient ε=6220 M−1cm−1\varepsilon = 6220\text{ M}^{-1}\text{cm}^{-1} and path length l=1.00 cml = 1.00\text{ cm}, the absorbance of NADH decreases by ΔA340=0.1866\Delta A_{340} = 0.1866 over 3.00 minutes3.00\text{ minutes}. Calculate: (a) the concentration change Δ[NADH]\Delta [\text{NADH}] in μM\mu\text{M}, and (b) the total consumption rate of NADH in nmol/min\text{nmol/min}.

Answer

(a) Δ[NADH]=30.0 μM\Delta [\text{NADH}] = 30.0\,\mu\text{M}; (b) Rate=30.0 nmol/min\text{Rate} = 30.0\text{ nmol/min}. Key steps: (a) By Beer-Lambert Law, Δ[NADH]=ΔA/(ε⋅l)=0.1866/(6220 M−1cm−1×1.00 cm)=3.00×10−5 M=30.0 μM\Delta [\text{NADH}] = \Delta A / (\varepsilon \cdot l) = 0.1866 / (6220\text{ M}^{-1}\text{cm}^{-1} \times 1.00\text{ cm}) = 3.00 \times 10^{-5}\text{ M} = 30.0\,\mu\text{M}. (b) Concentration rate =30.0 μM/3.00 min=10.0 μM/min= 30.0\,\mu\text{M} / 3.00\text{ min} = 10.0\,\mu\text{M/min}. Total rate =10.0 μmol/(L⋅min)×0.00300 L=0.0300 μmol/min=30.0 nmol/min= 10.0\,\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.00300\text{ L} = 0.0300\,\mu\text{mol/min} = 30.0\text{ nmol/min}.

Loading workspace…