Resources

In extreme halophyte habitats, coastal mangrove roots extract water from seawater having an osmotic potential of Ψsea=−2.85 MPa\Psi_{\text{sea}} = -2.85\text{ MPa}. As soil conditions approach the asymptotic limit of absolute water depletion, the root xylem must maintain an continuous column of water to a canopy height of 15.0 m15.0\text{ m}. The gravitational potential gradient is ΔΨgΔh=+0.010 MPa/m\frac{\Delta \Psi_g}{\Delta h} = +0.010\text{ MPa/m}, and frictional resistance across the xylem tracheary elements adds an extra dynamic pressure drop of 0.015 MPa/m0.015\text{ MPa/m}. If the xylem sap solute potential approaches the extreme purity limit of Ψs≈0.00 MPa\Psi_s \approx 0.00\text{ MPa}, calculate the minimum negative hydrostatic pressure potential (Ψp\Psi_p) that must be sustained at the leaf xylem surface to extract water and maintain transpiration. Round to three significant figures.

Answer and steps

Final answer

Ψp=−3.23 MPa\Psi_p = -3.23\text{ MPa} (tension)

Steps

01

Principle of Water Flow in the Xylem

Water moves passively from a region of higher (less negative) water potential (Ψ\Psi) to a region of lower (more negative) water potential. According to the cohesion-tension theory, for a mangrove to draw water from saline surroundings and transport it upward to the canopy, the water potential at the leaf must be sufficiently negative to overcome:

  1. The water potential of the surrounding seawater (Ψsea\Psi_{\text{sea}}).
  2. The gravitational head required to lift water to height hh.
  3. The frictional drag generated by water flowing through xylem vessels.

The total water potential of a solution is given by: Ψ=Ψs+Ψp+Ψg\Psi = \Psi_s + \Psi_p + \Psi_g


02

Determine the Necessary Drop in Potential Across the Height

The tree canopy is at a height of h=15.0 mh = 15.0\text{ m}. Over this vertical distance, two factors contribute to a decrease in water potential from the base to the top:

  • Gravitational component (ΔΨg\Delta \Psi_g): ΔΨg=(0.010 MPa/m)×15.0 m=0.150 MPa\Delta \Psi_g = \left(0.010\text{ MPa/m}\right) \times 15.0\text{ m} = 0.150\text{ MPa}
  • Frictional resistance (ΔΨfriction\Delta \Psi_{\text{friction}}): ΔΨfriction=(0.015 MPa/m)×15.0 m=0.225 MPa\Delta \Psi_{\text{friction}} = \left(0.015\text{ MPa/m}\right) \times 15.0\text{ m} = 0.225\text{ MPa}

The combined potential drop required to pull the sap upward through the xylem column is: ΔΨascent=ΔΨg+ΔΨfriction=0.150 MPa+0.225 MPa=0.375 MPa\Delta \Psi_{\text{ascent}} = \Delta \Psi_g + \Delta \Psi_{\text{friction}} = 0.150\text{ MPa} + 0.225\text{ MPa} = 0.375\text{ MPa}


03

Calculate Minimum Leaf Water Potential (Ψleaf\Psi_{\text{leaf}})

For water uptake from seawater (Ψsea=−2.85 MPa\Psi_{\text{sea}} = -2.85\text{ MPa}) to occur and drive transpiration, the water potential at the leaf xylem must be at least as negative as the base potential minus the ascent losses: Ψleaf=Ψsea−ΔΨascent\Psi_{\text{leaf}} = \Psi_{\text{sea}} - \Delta \Psi_{\text{ascent}} Ψleaf=−2.85 MPa−0.375 MPa=−3.225 MPa\Psi_{\text{leaf}} = -2.85\text{ MPa} - 0.375\text{ MPa} = -3.225\text{ MPa}


04

Find the Hydrostatic Pressure Potential (Ψp\Psi_p)

Within the xylem sap, total water potential is the sum of osmotic (solute) potential and hydrostatic pressure (tension) potential: Ψleaf=Ψs+Ψp\Psi_{\text{leaf}} = \Psi_s + \Psi_p

Given that the xylem sap solute potential approaches the pure water limit (Ψs≈0.00 MPa\Psi_s \approx 0.00\text{ MPa}): Ψp=Ψleaf−Ψs=−3.225 MPa−0.00 MPa=−3.225 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} - 0.00\text{ MPa} = -3.225\text{ MPa}

Rounding to three significant figures gives: Ψp=−3.23 MPa (tension)\Psi_p = -3.23\text{ MPa}\text{ (tension)}

Common Pitfall: Solute potential (Ψs\Psi_s) and tension (Ψp\Psi_p) are both represented as negative quantities in water relations. Be careful not to add the frictional and gravitational potentials to seawater algebraically without recognizing that moving up the tree requires an increasingly negative tension (stronger suction).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds rather than subtracts the gravitational and frictional pressure drops from the negative seawater potential, resulting in an insufficient negative tension.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔΨg=0.010×15.0=0.150 MPa  ⟹  ΔΨf=0.015×15.0=0.225 MPa  ⟹  Total vertical gradient=0.150+0.225=0.375 MPa\Delta \Psi_g = 0.010 \times 15.0 = 0.150\text{ MPa} \implies \Delta \Psi_f = 0.015 \times 15.0 = 0.225\text{ MPa} \implies \text{Total vertical gradient} = 0.150 + 0.225 = 0.375\text{ MPa}

  2. Step 2

    Ψleaf=−2.85+0.375=−2.475 MPa\Psi_{\text{leaf}} = -2.85 + 0.375 = -2.475\text{ MPa}

    Correct

    Ψleaf=Ψsea−ΔΨascent=−2.85 MPa−0.375 MPa=−3.225 MPa\Psi_{\text{leaf}} = \Psi_{\text{sea}} - \Delta \Psi_{\text{ascent}} = -2.85\text{ MPa} - 0.375\text{ MPa} = -3.225\text{ MPa}

    To pull water upward against gravity and friction from seawater, the leaf water potential must be more negative than the seawater potential. Adding 0.375 MPa0.375\text{ MPa} makes the leaf water potential higher than the seawater, which would cause water to flow downward rather than upward.

  3. Step 3

    Ψp=Ψleaf=−2.48 MPa\Psi_p = \Psi_{\text{leaf}} = -2.48\text{ MPa}

    Correct

    Ψp=Ψleaf−Ψs=−3.225 MPa−0.00 MPa=−3.23 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} - 0.00\text{ MPa} = -3.23\text{ MPa}

    You correctly recognized that Ψp=Ψleaf\Psi_p = \Psi_{\text{leaf}} when Ψs≈0.00 MPa\Psi_s \approx 0.00\text{ MPa}, but this value was affected by the sign error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated both the gravitational and frictional pressure drops across the 15.0 m15.0\text{ m} column accurately.

You summed the two flow resistances correctly to get a total loss of 0.375 MPa0.375\text{ MPa}.

You correctly related leaf water potential directly to hydrostatic pressure potential in the limit of pure xylem sap.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in water potential gradient

You added the ascent losses to the seawater potential instead of subtracting them to make the leaf potential more negative.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of passive water movement across a potential gradient. Water moves passively from higher (less negative) to lower (more negative) water potential. Therefore, transporting sap upward through resistance requires the canopy end to have a substantially lower, more negative potential than the source.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Flow Direction
  • Passive water transport requires Ψsink<Ψsource\Psi_{\text{sink}} < \Psi_{\text{source}} (the sink must be more negative than the source).

  • Always verify that the leaf water potential is strictly more negative than the root/soil/seawater potential before continuing.

Subtract Upward Resistances
  • Each resistance or elevation gain requires additional tension: Ψleaf=Ψsource−ΔΨg−ΔΨfriction\Psi_{\text{leaf}} = \Psi_{\text{source}} - \Delta \Psi_g - \Delta \Psi_{\text{friction}}.

  • Subtract all ascent-related potential requirements from the base potential.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the combined vertical resistance from the seawater potential: Ψleaf=−2.85 MPa−0.375 MPa=−3.225 MPa\Psi_{\text{leaf}} = -2.85\text{ MPa} - 0.375\text{ MPa} = -3.225\text{ MPa}.

  2. Apply the water potential equation for xylem sap with Ψs≈0.00 MPa\Psi_s \approx 0.00\text{ MPa}: Ψp=Ψleaf−Ψs=−3.225 MPa−0.00 MPa=−3.225 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} - 0.00\text{ MPa} = -3.225\text{ MPa}.

  3. Round to three significant figures: Ψp=−3.23 MPa\Psi_p = -3.23\text{ MPa}.

Final answer

Ψp=−3.23 MPa\Psi_p = -3.23\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the cohesion-tension theory to reinforce why transpiration pull requires increasingly negative water potentials along the pathway from roots to leaves.

  • Practice setting up water potential balance equations by explicitly labeling sources as less negative and sinks as more negative.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the dynamic frictional resistance gradient along the xylem conduits, accounting only for gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔΨg=0.010×15.0=0.150 MPa\Delta \Psi_g = 0.010 \times 15.0 = 0.150\text{ MPa}

  2. Step 2

    Ψleaf=Ψsea−ΔΨg  ⟹  Ψleaf=−2.85−0.150=−3.00 MPa\Psi_{\text{leaf}} = \Psi_{\text{sea}} - \Delta \Psi_g \implies \Psi_{\text{leaf}} = -2.85 - 0.150 = -3.00\text{ MPa}

    Correct

    ΔΨfriction=0.015 MPa/m×15.0 m=0.225 MPa  ⟹  Ψleaf=Ψsea−(ΔΨg+ΔΨfriction)=−2.85−0.375=−3.225 MPa\Delta \Psi_{\text{friction}} = 0.015\text{ MPa/m} \times 15.0\text{ m} = 0.225\text{ MPa} \implies \Psi_{\text{leaf}} = \Psi_{\text{sea}} - (\Delta \Psi_g + \Delta \Psi_{\text{friction}}) = -2.85 - 0.375 = -3.225\text{ MPa}

    You omitted the dynamic pressure loss caused by viscous friction as sap flows through xylem vessels (0.015 MPa/m×15.0 m=0.225 MPa0.015\text{ MPa/m} \times 15.0\text{ m} = 0.225\text{ MPa}). To sustain continuous transpiration, leaf water potential must overcome both gravity and conduit friction.

  3. Step 3

    Ψp=Ψleaf=−3.00 MPa\Psi_p = \Psi_{\text{leaf}} = -3.00\text{ MPa}

    Correct

    Ψp=Ψleaf−Ψs=−3.225 MPa−0.00 MPa≈−3.23 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} - 0.00\text{ MPa} \approx -3.23\text{ MPa}

    Your reasoning equating Ψp\Psi_p to Ψleaf\Psi_{\text{leaf}} when Ψs≈0\Psi_s \approx 0 is valid, but the numerical value carries over the omission of friction from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational potential gradient contribution across the 15-meter column.

You recognized that water movement requires the leaf water potential to be more negative than the source water potential.

You correctly related hydrostatic pressure potential Ψp\Psi_p to total water potential Ψ\Psi when solute potential is negligible.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of hydrodynamic frictional resistance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated sap ascent as purely a static balance against gravity, overlooking that bulk fluid flow through microscale xylem conduits requires additional tension to overcome wall shear and viscous drag.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for both static and dynamic resistance
  • Total potential drop during transpiration is the sum of static head (gravity) and hydrodynamic losses (friction): ΔΨascent=ΔΨg+ΔΨfriction\Delta \Psi_{\text{ascent}} = \Delta \Psi_g + \Delta \Psi_{\text{friction}}.

  • Inspect the problem for resistance or drag gradients ( MPa/m\,\text{MPa/m}) and add them to the gravitational requirement before computing leaf potential.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the frictional head loss across the 15.0 m column: ΔΨfriction=0.015 MPa/m×15.0 m=0.225 MPa\Delta \Psi_{\text{friction}} = 0.015\text{ MPa/m} \times 15.0\text{ m} = 0.225\text{ MPa}.

  2. Combine gravitational and frictional ascent losses: ΔΨascent=0.150 MPa+0.225 MPa=0.375 MPa\Delta \Psi_{\text{ascent}} = 0.150\text{ MPa} + 0.225\text{ MPa} = 0.375\text{ MPa}.

  3. Calculate the minimum required leaf water potential: Ψleaf=−2.85 MPa−0.375 MPa=−3.225 MPa\Psi_{\text{leaf}} = -2.85\text{ MPa} - 0.375\text{ MPa} = -3.225\text{ MPa}.

  4. Evaluate leaf hydrostatic pressure potential with Ψs≈0.00 MPa\Psi_s \approx 0.00\text{ MPa}: Ψp=Ψleaf−Ψs=−3.225 MPa≈−3.23 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} \approx -3.23\text{ MPa}.

Final answer

Ψp=−3.23 MPa\Psi_p = -3.23\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Hagen-Poiseuille resistance concept to understand why sap flow through tracheary elements generates dynamic pressure drops.

  • Practice setting up total water potential gradients by listing all three components: source osmotic potential, gravitational head, and conduit resistance.

OverviewACEpath Teacher's Diagnosis

03 The student equates the required leaf water potential directly to the seawater osmotic potential, neglecting both gravitational and frictional losses along the 15-meter xylem path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψleaf=Ψsea=−2.85 MPa\Psi_{\text{leaf}} = \Psi_{\text{sea}} = -2.85\text{ MPa}

    Correct

    Ψleaf=Ψsea−(ΔΨgΔh+ΔΨfrictionΔh)h=−2.85 MPa−(0.010+0.015) MPa/m×15.0 m=−3.225 MPa\Psi_{\text{leaf}} = \Psi_{\text{sea}} - \left(\frac{\Delta \Psi_g}{\Delta h} + \frac{\Delta \Psi_{\text{friction}}}{\Delta h}\right) h = -2.85\text{ MPa} - (0.010 + 0.015)\text{ MPa/m} \times 15.0\text{ m} = -3.225\text{ MPa}

    Water must move upward against gravity and overcome hydrodynamic friction along the 15.0 m15.0\text{ m} xylem column. This requires the leaf water potential to be more negative than seawater by the combined ascent losses: ΔΨascent=(0.010+0.015) MPa/m×15.0 m=0.375 MPa\Delta \Psi_{\text{ascent}} = (0.010 + 0.015)\text{ MPa/m} \times 15.0\text{ m} = 0.375\text{ MPa}.

  2. Step 2

    Ψleaf=Ψp+Ψs  ⟹  Ψs=0.00 MPa  ⟹  Ψp=−2.85 MPa\Psi_{\text{leaf}} = \Psi_p + \Psi_s \implies \Psi_s = 0.00\text{ MPa} \implies \Psi_p = -2.85\text{ MPa}

    Correct

    Ψp=Ψleaf−Ψs=−3.225 MPa−0.00 MPa=−3.23 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} - 0.00\text{ MPa} = -3.23\text{ MPa}

    Your formula and substitution of Ψs=0.00 MPa\Psi_s = 0.00\text{ MPa} are correct, but the calculated pressure potential is affected by the missing ascent losses from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that total water potential in the xylem is the sum of pressure potential and solute potential: Ψ=Ψp+Ψs\Psi = \Psi_p + \Psi_s.

You correctly substituted Ψs=0.00 MPa\Psi_s = 0.00\text{ MPa} for pure xylem sap.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of gravitational and frictional potential gradients

You equated leaf water potential directly to seawater potential without accounting for vertical transport resistance over the 15.0 m15.0\text{ m} height.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that lifting sap against gravity and conduit wall friction consumes potential energy, which requires leaf transpiration to generate an even more negative hydrostatic tension than the soil/seawater source.

REASONING PATH
Your ACEpath teacher’s suggested approach
Include all ascent resistances
  • Ψleaf≤Ψroot/soil−ΔΨg−ΔΨfriction\Psi_{\text{leaf}} \le \Psi_{\text{root/soil}} - \Delta \Psi_g - \Delta \Psi_{\text{friction}}

  • Multiply both the gravitational gradient (0.010 MPa/m0.010\text{ MPa/m}) and the frictional gradient (0.015 MPa/m0.015\text{ MPa/m}) by the canopy height (h=15.0 mh = 15.0\text{ m}), and subtract the sum from the base water potential.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total potential drop required for sap ascent: ΔΨascent=(0.010 MPa/m+0.015 MPa/m)×15.0 m=0.375 MPa\Delta \Psi_{\text{ascent}} = (0.010\text{ MPa/m} + 0.015\text{ MPa/m}) \times 15.0\text{ m} = 0.375\text{ MPa}.

  2. Subtract this ascent drop from the seawater water potential: Ψleaf=−2.85 MPa−0.375 MPa=−3.225 MPa\Psi_{\text{leaf}} = -2.85\text{ MPa} - 0.375\text{ MPa} = -3.225\text{ MPa}.

  3. Solve for xylem pressure potential with Ψs=0.00 MPa\Psi_s = 0.00\text{ MPa}: Ψp=Ψleaf−Ψs=−3.225 MPa−0.00 MPa=−3.225 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.225\text{ MPa} - 0.00\text{ MPa} = -3.225\text{ MPa}.

Final answer

Ψp=−3.23 MPa\Psi_p = -3.23\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always construct a full vertical water potential budget (Psitextleaf=Psitextsoil−DeltaPsig−DeltaPsitextfriction\\Psi_{\\text{leaf}} = \\Psi_{\\text{soil}} - \\Delta \\Psi_g - \\Delta \\Psi_{\\text{friction}}) whenever a height or resistance gradient is given.

  • Verify that tension in the xylem becomes progressively more negative (stronger suction) as you move from roots to canopy.

Lock it in

Similar question

01

A desert shrub extracts water from soil with an osmotic potential of Ψsoil=−1.60 MPa\Psi_{\text{soil}} = -1.60\text{ MPa}. The plant height is 4.0 m4.0\text{ m}, the gravitational gradient is 0.010 MPa/m0.010\text{ MPa/m}, and frictional drag in the xylem adds 0.020 MPa/m0.020\text{ MPa/m}. Assuming pure xylem sap (Ψs≈0.00 MPa\Psi_s \approx 0.00\text{ MPa}), calculate the minimum leaf hydrostatic pressure potential Ψp\Psi_p required to sustain upward transpiration flow.

Answer

Ψp=−1.72 MPa\Psi_p = -1.72\text{ MPa}. Ascent losses: ΔΨ=(0.010+0.020) MPa/m×4.0 m=0.12 MPa\Delta \Psi = (0.010 + 0.020)\text{ MPa/m} \times 4.0\text{ m} = 0.12\text{ MPa}. Leaf potential: Ψleaf=Ψsoil−ΔΨ=−1.60−0.12=−1.72 MPa\Psi_{\text{leaf}} = \Psi_{\text{soil}} - \Delta \Psi = -1.60 - 0.12 = -1.72\text{ MPa}. With Ψs=0\Psi_s = 0, Ψp=−1.72 MPa\Psi_p = -1.72\text{ MPa}.

02

A coastal mangrove of height 20.0 m20.0\text{ m} grows in seawater with Ψsea=−2.50 MPa\Psi_{\text{sea}} = -2.50\text{ MPa}. The gravitational potential gradient is 0.010 MPa/m0.010\text{ MPa/m} and the xylem dynamic friction is 0.025 MPa/m0.025\text{ MPa/m}. If the xylem sap contains trace solutes such that Ψs=−0.10 MPa\Psi_s = -0.10\text{ MPa}, calculate the required hydrostatic pressure potential Ψp\Psi_p in the leaves to sustain flow.

Answer

Ψp=−3.10 MPa\Psi_p = -3.10\text{ MPa}. Ascent loss: ΔΨ=(0.010+0.025) MPa/m×20.0 m=0.70 MPa\Delta \Psi = (0.010 + 0.025)\text{ MPa/m} \times 20.0\text{ m} = 0.70\text{ MPa}. Leaf water potential: Ψleaf=−2.50−0.70=−3.20 MPa\Psi_{\text{leaf}} = -2.50 - 0.70 = -3.20\text{ MPa}. Hydrostatic pressure: Ψp=Ψleaf−Ψs=−3.20−(−0.10)=−3.10 MPa\Psi_p = \Psi_{\text{leaf}} - \Psi_s = -3.20 - (-0.10) = -3.10\text{ MPa}.

03

A 30.0 m30.0\text{ m} tall coastal tree operates at peak transpiration. The soil water potential is Ψsoil=−2.00 MPa\Psi_{\text{soil}} = -2.00\text{ MPa}. Gravity imposes a gradient of 0.010 MPa/m0.010\text{ MPa/m}, and the leaves develop a hydrostatic tension of Ψp=−3.05 MPa\Psi_p = -3.05\text{ MPa} with xylem sap solute potential Ψs=−0.05 MPa\Psi_s = -0.05\text{ MPa}. Determine the maximum allowable dynamic frictional resistance gradient (in MPa/m\text{MPa/m}) before upward flow ceases.

Answer

Frictional gradient=0.025 MPa/m\text{Frictional gradient} = 0.025\text{ MPa/m}. Leaf potential: Ψleaf=Ψs+Ψp=−0.05+(−3.05)=−3.10 MPa\Psi_{\text{leaf}} = \Psi_s + \Psi_p = -0.05 + (-3.05) = -3.10\text{ MPa}. Total allowable drop: ΔΨtotal=Ψsoil−Ψleaf=−2.00−(−3.10)=1.10 MPa\Delta \Psi_{\text{total}} = \Psi_{\text{soil}} - \Psi_{\text{leaf}} = -2.00 - (-3.10) = 1.10\text{ MPa}. Gravitational drop: ΔΨg=0.010 MPa/m×30.0 m=0.30 MPa\Delta \Psi_g = 0.010\text{ MPa/m} \times 30.0\text{ m} = 0.30\text{ MPa}. Allowable friction drop: ΔΨf=1.10−0.30=0.80 MPa\Delta \Psi_f = 1.10 - 0.30 = 0.80\text{ MPa}. Max gradient: 0.80 MPa/30.0 m≈0.0267 MPa/m0.80\text{ MPa} / 30.0\text{ m} \approx 0.0267\text{ MPa/m} (or 0.027 MPa/m0.027\text{ MPa/m}).

Loading workspace…