Resources

In the light-dependent reactions and the Calvin cycle of C3C_3 photosynthesis, plants convert radiant energy into stable chemical energy. Consider an intact spinach chloroplast actively synthesizing one mole of glucose (C6H12O6C_6H_{12}O_6) via the standard Calvin-Benson cycle under non-cyclic photophosphorylation. Assuming an overall stoichiometric requirement of 18 mol18\text{ mol} of ATP\text{ATP} and 12 mol12\text{ mol} of NADPH\text{NADPH} per mole of glucose synthesized from 6 mol6\text{ mol} of CO2\text{CO}_2: (a) Calculate the total moles of water (H2O\text{H}_2\text{O}) that must be split photolytically by photosystem II (PSII) to provide the electrons needed to reduce 12 mol12\text{ mol} of NADP+\text{NADP}^+ to NADPH\text{NADPH}. (b) Determine the number of moles of diatomic oxygen (O2\text{O}_2) released as a byproduct during this process.

Answer and steps

Final answer

(a) 12 mol of H2O12\text{ mol of } \text{H}_2\text{O}; (b) 6 mol of O26\text{ mol of } \text{O}_2 (yielding the stoichiometric ratio of 12 mol H2O:6 mol O212\text{ mol } \text{H}_2\text{O} : 6\text{ mol } \text{O}_2 per mole of glucose synthesized).

Steps

(a) Moles of Water (HX2O\ce{H2O}) Split

  1. Relating Electron Transfer to NADPH\ce{NADPH} Formation:
    In the light-dependent reactions of photosynthesis, the reduction of each molecule of NADPX+\ce{NADP+} to NADPH\ce{NADPH} requires two electrons (2eX−2\ce{e-}): NADPX++2 eX−+HX+→NADPH\ce{NADP+ + 2e- + H+ -> NADPH} To produce 12 mol12\text{ mol} of NADPH\ce{NADPH}, the total number of electrons required is: 12 mol×2=24 mol of electrons (eX−)12\text{ mol} \times 2 = 24\text{ mol of electrons } (\ce{e-})
  2. Photolysis of Water at Photosystem II (PSII):
    Water-splitting (photolysis) serves as the primary electron donor to replace electrons excited in PSII. The oxidation reaction for water is: 2 HX2O→4 HX++4 eX−+OX2\ce{2H2O -> 4H+ + 4e- + O2} From this equation, each mole of HX2O\ce{H2O} oxidized releases 2 mol2\text{ mol} of electrons: 1 HX2O→2 HX++2 eX−+12OX2\ce{1H2O -> 2H+ + 2e- + \frac{1}{2}O2}
  3. Calculating Required Moles of HX2O\ce{H2O}:
    Using the required 24 mol24\text{ mol} of electrons: Moles of HX2O=24 mol eX−2 mol eX−/mol HX2O=12 mol of HX2O\text{Moles of }\ce{H2O} = \frac{24\text{ mol }\ce{e-}}{2\text{ mol }\ce{e-}/\text{mol }\ce{H2O}} = 12\text{ mol of }\ce{H2O}

(b) Moles of Diatomic Oxygen (OX2\ce{O2}) Released

  1. Stoichiometric Ratio of OX2\ce{O2} Produced per HX2O\ce{H2O} Split:
    From the balanced photolysis equation: 2 HX2O→4 HX++4 eX−+OX2\ce{2H2O -> 4H+ + 4e- + O2} Every 2 mol2\text{ mol} of HX2O\ce{H2O} split yields 1 mol1\text{ mol} of OX2\ce{O2} (a 2:12 : 1 molar ratio).
  2. Calculating Moles of OX2\ce{O2}:
    Moles of OX2=12 mol of HX2O2=6 mol of OX2\text{Moles of }\ce{O2} = \frac{12\text{ mol of }\ce{H2O}}{2} = 6\text{ mol of }\ce{O2}

Common Pitfall:
In the simplified overall photosynthetic equation, 6 COX2+6 HX2O→CX6HX12OX6+6 OX2\ce{6CO2 + 6H2O -> C6H12O6 + 6O2}, only the net water consumption (6 mol6\text{ mol}) is shown because 6 mol6\text{ mol} of water are regenerated biochemically. However, strictly in terms of the light-dependent photolysis at PSII, all 6 mol6\text{ mol} of OX2\ce{O2} come entirely from water oxidation, requiring the splitting of 12 mol12\text{ mol} of HX2O\ce{H2O} to yield the 24 mol24\text{ mol} of electrons needed for 12 mol12\text{ mol} of NADPH\ce{NADPH}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes each water molecule provides only 1 electron because each water molecule has been split to reduce one NADP+ yielding H+, leading to doubling the required water to 24 moles and consequently 12 moles of O2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Electrons required=12×2=24 mol e−\text{Electrons required} = 12 \times 2 = 24\text{ mol }\text{e}^-

  2. Step 2

    Assuming 1 e− per H2O:  ⟹  Moles of H2O=24 mol\text{Assuming } 1\text{ e}^- \text{ per } \text{H}_2\text{O}: \implies \text{Moles of } \text{H}_2\text{O} = 24\text{ mol}

    Correct

    Moles of H2O=24 mol e−2 mol e−/mol H2O=12 mol of H2O\text{Moles of } \text{H}_2\text{O} = \frac{24\text{ mol }\text{e}^-}{2\text{ mol }\text{e}^-/\text{mol }\text{H}_2\text{O}} = 12\text{ mol of } \text{H}_2\text{O}

    Each water molecule releases 22 electrons when oxidized (2H2O→4H++4e−+O22\text{H}_2\text{O} \to 4\text{H}^+ + 4\text{e}^- + \text{O}_2, which simplifies to 1H2O→2H++2e−+12O21\text{H}_2\text{O} \to 2\text{H}^+ + 2\text{e}^- + \frac{1}{2}\text{O}_2). Therefore, providing 24 mol24\text{ mol} of electrons requires 12 mol12\text{ mol} of H2O\text{H}_2\text{O}, not 24 mol24\text{ mol}.

  3. Step 3

    2H2O→O2+4H++4e−  ⟹  Moles of O2=242=12 mol2\text{H}_2\text{O} \to \text{O}_2 + 4\text{H}^+ + 4\text{e}^- \implies \text{Moles of } \text{O}_2 = \frac{24}{2} = 12\text{ mol}

    Correct

    Moles of O2=12 mol of H2O2=6 mol of O2\text{Moles of } \text{O}_2 = \frac{12\text{ mol of } \text{H}_2\text{O}}{2} = 6\text{ mol of } \text{O}_2

    You correctly applied the 2:12:1 molar ratio of H2O\text{H}_2\text{O} to O2\text{O}_2 from your photolysis equation, but substituting the incorrect 24 mol of H2O24\text{ mol of }\text{H}_2\text{O} from Step 2 carried the error into your final oxygen value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated that reducing 12 mol12\text{ mol} of NADP+\text{NADP}^+ requires 24 mol24\text{ mol} of electrons.

You wrote down the fully balanced photolysis equation: 2H2O→O2+4H++4e−2\text{H}_2\text{O} \to \text{O}_2 + 4\text{H}^+ + 4\text{e}^-.

You applied the correct stoichiometric ratio of 2 mol H2O:1 mol O22\text{ mol }\text{H}_2\text{O} : 1\text{ mol }\text{O}_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron stoichiometry per water molecule

Assuming 1 e−1\text{ e}^- per H2O\text{H}_2\text{O} despite writing the balanced equation showing 4 e−4\text{ e}^- produced from 2H2O2\text{H}_2\text{O}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the oxidation state of oxygen changes from −2-2 in H2O\text{H}_2\text{O} to 00 in elemental O2\text{O}_2, meaning each single water molecule donates 22 electrons (4 e−/2H2O=2 e−/H2O4\text{ e}^- / 2\text{H}_2\text{O} = 2\text{ e}^-/\text{H}_2\text{O}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Electron Yield of Photolysis
  • From 2H2O→4H++4e−+O22\text{H}_2\text{O} \to 4\text{H}^+ + 4\text{e}^- + \text{O}_2, the electron yield is 4 e−2 H2O=2 e− per H2O\frac{4\text{ e}^-}{2\text{ H}_2\text{O}} = 2\text{ e}^-\text{ per }\text{H}_2\text{O}.

  • Always verify that your assumed electron-to-molecule ratio matches the coefficients of the balanced half-reaction.

Electron Balance to NADPH
  • n(H2O)×2=n(NADPH)×2=n(e−)n(\text{H}_2\text{O}) \times 2 = n(\text{NADPH}) \times 2 = n(\text{e}^-).

  • Since each H2O\text{H}_2\text{O} supplies 2 e−2\text{ e}^- and each NADPH\text{NADPH} accepts 2 e−2\text{ e}^-, the molar ratio of H2O\text{H}_2\text{O} split to NADPH\text{NADPH} formed is always 1:11 : 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the balanced equation 2H2O→O2+4H++4e−2\text{H}_2\text{O} \to \text{O}_2 + 4\text{H}^+ + 4\text{e}^- to find the electron yield per mole of water: 4 mol e−2 mol H2O=2 mol e−/mol H2O\frac{4\text{ mol }\text{e}^-}{2\text{ mol }\text{H}_2\text{O}} = 2\text{ mol }\text{e}^-/\text{mol }\text{H}_2\text{O}.

  2. Calculate the moles of H2O\text{H}_2\text{O} split: n(H2O)=24 mol e−2 mol e−/mol H2O=12 moln(\text{H}_2\text{O}) = \frac{24\text{ mol }\text{e}^-}{2\text{ mol }\text{e}^-/\text{mol }\text{H}_2\text{O}} = 12\text{ mol}.

  3. Calculate the moles of O2\text{O}_2 evolved using the 2:12:1 ratio: n(O2)=12 mol H2O2=6 moln(\text{O}_2) = \frac{12\text{ mol }\text{H}_2\text{O}}{2} = 6\text{ mol}.

Final answer

(a) 12 mol of H2O12\text{ mol of } \text{H}_2\text{O}; (b) 6 mol of O26\text{ mol of } \text{O}_2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the oxidation numbers in water photolysis (oxygen goes from −2-2 to 00) to remember why water yields 2 e−2\text{ e}^-.

  • Practice checking consistency between written chemical equations and written conversion factors before calculating numerical values.

OverviewACEpath Teacher's Diagnosis

02 The student confuses diatomic oxygen (O2) with individual oxygen atoms (O), correctly finding 12 mol of H2O but concluding that 12 mol of O2 gas are produced.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    12 mol NADPH requires 24 mol electrons.  ⟹  Each HX2O yields 2 electrons.  ⟹  Moles of HX2O=12 mol12\text{ mol NADPH requires } 24\text{ mol electrons.} \implies \text{Each } \ce{H2O} \text{ yields } 2\text{ electrons.} \implies \text{Moles of } \ce{H2O} = 12\text{ mol}

  2. Step 2

    1HX2O gives 1 oxygen  ⟹  Moles of OX2 released=12 mol1\ce{ H2O} \text{ gives } 1\text{ oxygen} \implies \text{Moles of } \ce{O2} \text{ released} = 12\text{ mol}

    Correct

    2HX2O→4 HX++4 eX−+OX2  ⟹  Moles of OX2=12 mol HX2O2=6 mol OX22\ce{H2O -> 4H+ + 4e- + O2} \implies \text{Moles of } \ce{O2} = \frac{12\text{ mol } \ce{H2O}}{2} = 6\text{ mol } \ce{O2}

    You treated the oxygen released as individual oxygen atoms rather than diatomic oxygen gas (OX2\ce{O2}). Because photolysis produces one mole of OX2\ce{O2} for every two moles of HX2O\ce{H2O} oxidized (2HX2O→4 HX++4 eX−+OX22\ce{H2O -> 4H+ + 4e- + O2}), 12 mol12\text{ mol} of HX2O\ce{H2O} produces 6 mol6\text{ mol} of OX2\ce{O2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated that reducing 12 mol12\text{ mol} of NADPX+\ce{NADP+} requires 24 mol24\text{ mol} of electrons.

You accurately identified that each molecule of water yields two electrons upon photolysis.

You arrived at the correct total of 12 mol12\text{ mol} of HX2O\ce{H2O} split in part (a).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Diatomic Molecule Oversight

You treated the single oxygen atom in HX2O\ce{H2O} as a full molecule of released oxygen gas rather than dividing by two to form diatomic OX2\ce{O2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating atomic oxygen (O\ce{O}) with molecular diatomic oxygen gas (OX2\ce{O2}) during photochemical stoichiometry.

REASONING PATH
Your ACEpath teacher’s suggested approach
Water Photolysis Stoichiometry
  • The balanced water-splitting reaction at Photosystem II is 2HX2O→4 HX++4 eX−+OX22\ce{H2O -> 4H+ + 4e- + O2}.

  • Always verify whether the question asks for moles of oxygen atoms (O\ce{O}) or molecular oxygen gas (OX2\ce{O2}), applying the 2HX2O:1OX22\ce{H2O} : 1\ce{O2} stoichiometric ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the balanced oxidation equation for water at PSII: 2HX2O→4 HX++4 eX−+OX22\ce{H2O -> 4H+ + 4e- + O2}.

  2. Notice that it takes 2 mol2\text{ mol} of HX2O\ce{H2O} to yield 1 mol1\text{ mol} of diatomic oxygen gas (OX2\ce{O2}).

  3. Divide the moles of water split by 2: 12 mol HX2O2=6 mol OX2\frac{12\text{ mol } \ce{H2O}}{2} = 6\text{ mol } \ce{O2}.

Final answer

(a) 12 mol of HX2O12\text{ mol of } \ce{H2O}; (b) 6 mol of OX26\text{ mol of } \ce{O2}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the full balanced half-reaction for photolysis (2HX2O→4 HX++4 eX−+OX22\ce{H2O -> 4H+ + 4e- + O2}) before setting up mole ratios.

  • Double-check the chemical formula of gaseous byproducts (such as OX2\ce{O2}) to ensure atom counts match molecule counts.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes a 1:1 molar ratio between water split and oxygen gas released (H2O -> O2), leading to an erroneous calculation of 12 moles of O2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Electrons needed for 12 NADPH=24 mol e−  ⟹  2H2O→4e−+4H++O2, so 2e− per H2O  ⟹  Moles of H2O=242=12 mol\text{Electrons needed for } 12\text{ NADPH} = 24\text{ mol e}^- \implies 2\text{H}_2\text{O} \rightarrow 4\text{e}^- + 4\text{H}^+ + \text{O}_2\text{, so } 2\text{e}^- \text{ per } \text{H}_2\text{O} \implies \text{Moles of } \text{H}_2\text{O} = \frac{24}{2} = 12\text{ mol}

  2. Step 2

    Ratio of H2O to O2 is 1:1  ⟹  Moles of O2=12 mol\text{Ratio of } \text{H}_2\text{O} \text{ to } \text{O}_2 \text{ is } 1:1 \implies \text{Moles of } \text{O}_2 = 12\text{ mol}

    Correct

    Ratio of H2O to O2 is 2:1  ⟹  Moles of O2=12 mol2=6 mol\text{Ratio of } \text{H}_2\text{O} \text{ to } \text{O}_2 \text{ is } 2:1 \implies \text{Moles of } \text{O}_2 = \frac{12\text{ mol}}{2} = 6\text{ mol}

    In the balanced photolysis equation 2H2O→4e−+4H++O22\text{H}_2\text{O} \rightarrow 4\text{e}^- + 4\text{H}^+ + \text{O}_2, each mole of diatomic oxygen (O2\text{O}_2) requires splitting two moles of water (H2O\text{H}_2\text{O}). Therefore, the molar ratio of H2O\text{H}_2\text{O} to O2\text{O}_2 is 2:12:1, releasing 6 mol6\text{ mol} of O2\text{O}_2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined that 24 mol24\text{ mol} of electrons are required to reduce 12 mol12\text{ mol} of NADP+\text{NADP}^+ to NADPH\text{NADPH}.

You wrote the balanced photolysis half-reaction for water and correctly calculated that 12 mol12\text{ mol} of H2O\text{H}_2\text{O} must be split.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient error in photolysis

You equated the moles of diatomic oxygen (O2\text{O}_2) directly to the moles of water (H2O\text{H}_2\text{O}) rather than applying the 2:12:1 stoichiometric coefficient from the photolysis reaction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that diatomic oxygen is composed of two oxygen atoms (2 O2\text{ O}), meaning that two water molecules must be oxidized to yield one molecule of O2\text{O}_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Examine the balanced water photolysis equation
  • The oxidation of water at PSII is represented by 2H2O→4H++4e−+O22\text{H}_2\text{O} \rightarrow 4\text{H}^+ + 4\text{e}^- + \text{O}_2.

  • Read the stoichiometric coefficients directly from the balanced equation: 2 mol of H2O:1 mol of O22\text{ mol of } \text{H}_2\text{O} : 1\text{ mol of } \text{O}_2.

Track oxygen atom conservation
  • Each molecule of H2O\text{H}_2\text{O} carries only one oxygen atom, whereas atmospheric oxygen is diatomic (O2\text{O}_2).

  • Divide the moles of water split by 22 to find the moles of O2\text{O}_2 released: n(O2)=12n(H2O)n(\text{O}_2) = \frac{1}{2} n(\text{H}_2\text{O}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the balanced photolysis equation from your first step: 2H2O→4H++4e−+O22\text{H}_2\text{O} \rightarrow 4\text{H}^+ + 4\text{e}^- + \text{O}_2.

  2. Identify the molar ratio between H2O\text{H}_2\text{O} and O2\text{O}_2, which is 2 mol H2O:1 mol O22\text{ mol } \text{H}_2\text{O} : 1\text{ mol } \text{O}_2.

  3. Calculate the moles of O2\text{O}_2 released: Moles of O2=12 mol H2O2=6 mol of O2\text{Moles of } \text{O}_2 = \frac{12\text{ mol } \text{H}_2\text{O}}{2} = 6\text{ mol of } \text{O}_2.

Final answer

(a) 12 mol of H2O12\text{ mol of } \text{H}_2\text{O}; (b) 6 mol of O26\text{ mol of } \text{O}_2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the stoichiometric coefficients of the water-splitting complex (oxygen-evolving complex) at photosystem II.

  • Practice converting between monoatomic species in substrates and diatomic gas products across biochemical pathways.

  • Solve stoichiometry problems tracking both electron yield and gas evolution simultaneously.

Lock it in

Similar question

01

An isolated thylakoid preparation synthesizes 4 mol4\text{ mol} of NADPH\text{NADPH} via non-cyclic electron flow. How many moles of H2O\text{H}_2\text{O} must be photolyzed, and how many moles of O2\text{O}_2 are released?

Answer

4 mol of H2O4\text{ mol of } \text{H}_2\text{O} and 2 mol of O22\text{ mol of } \text{O}_2. Key steps: 4 mol NADPH×2 e−=8 mol e−4\text{ mol }\text{NADPH} \times 2\text{ e}^- = 8\text{ mol }\text{e}^-. Moles of H2O=8 mol e−2 e−/H2O=4 mol\text{H}_2\text{O} = \frac{8\text{ mol }\text{e}^-}{2\text{ e}^-/\text{H}_2\text{O}} = 4\text{ mol}. Moles of O2=4 mol H2O2=2 mol\text{O}_2 = \frac{4\text{ mol }\text{H}_2\text{O}}{2} = 2\text{ mol}.

02

A suspension of Chlorella releases 1.5 mol1.5\text{ mol} of O2\text{O}_2 during active non-cyclic photosynthesis. Calculate (a) the moles of H2O\text{H}_2\text{O} oxidized and (b) the maximum moles of NADPH\text{NADPH} that can be produced from this electron transfer.

Answer

(a) 3.0 mol of H2O3.0\text{ mol of } \text{H}_2\text{O}; (b) 3.0 mol of NADPH3.0\text{ mol of } \text{NADPH}. Key steps: Photolysis stoichiometry is 2 H2O:1 O22\text{ H}_2\text{O} : 1\text{ O}_2, so n(H2O)=1.5×2=3.0 moln(\text{H}_2\text{O}) = 1.5 \times 2 = 3.0\text{ mol}. Total electrons released =3.0 mol×2 e−=6.0 mol e−= 3.0\text{ mol} \times 2\text{ e}^- = 6.0\text{ mol }\text{e}^-. Since each NADPH\text{NADPH} requires 2 e−2\text{ e}^-, n(NADPH)=6.02=3.0 moln(\text{NADPH}) = \frac{6.0}{2} = 3.0\text{ mol}.

03

To produce one mole of sucrose (C12H22O11\text{C}_{12}\text{H}_{22}\text{O}_{11}) through the Calvin-Benson cycle, 24 mol24\text{ mol} of NADPH\text{NADPH} are required. Assuming non-cyclic photophosphorylation is the sole source of reducing equivalents: (a) determine the moles of H2O\text{H}_2\text{O} split at PSII, and (b) determine the volume of O2\text{O}_2 gas evolved at standard temperature and pressure (STP, where 1 mol=22.4 L1\text{ mol} = 22.4\text{ L}).

Answer

(a) 24 mol of H2O24\text{ mol of } \text{H}_2\text{O}; (b) 268.8 L of O2268.8\text{ L of } \text{O}_2. Key steps: Total electrons needed =24 mol NADPH×2 e−=48 mol e−= 24\text{ mol }\text{NADPH} \times 2\text{ e}^- = 48\text{ mol }\text{e}^-. Moles of H2O=48 mol e−2 e−/H2O=24 mol\text{H}_2\text{O} = \frac{48\text{ mol }\text{e}^-}{2\text{ e}^-/\text{H}_2\text{O}} = 24\text{ mol}. Moles of O2=24 mol H2O2=12 mol O2\text{O}_2 = \frac{24\text{ mol }\text{H}_2\text{O}}{2} = 12\text{ mol }\text{O}_2. Volume at STP =12 mol×22.4 L/mol=268.8 L= 12\text{ mol} \times 22.4\text{ L/mol} = 268.8\text{ L}.

Loading workspace…