Resources

A shallow subpolar lake ecosystem holds an initial volume of 4.50×107 m34.50 \times 10^7\text{ m}^3 of water at 1.00 ∘C1.00\text{ }^\circ\text{C}. Due to regional climate warming, the water absorbs a total heat energy of Q=9.45×1014 JQ = 9.45 \times 10^{14}\text{ J}. Take the density of water as ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3 and the specific heat capacity of water as c=4184 J/(kg⋅∘C)c = 4184\text{ J}/(\text{kg}\cdot{^\circ\text{C}}). Concurrently, the dissolved oxygen (DO) saturation capacity decreases with temperature according to the empirical relationship DOsat(T)=14.6−0.380⋅T\text{DO}_{\text{sat}}(T) = 14.6 - 0.380 \cdot T (in mg/L\text{mg/L}, where TT is in ∘C^\circ\text{C}). Assuming the water remains fully saturated with oxygen, calculate the final equilibrium water temperature TfT_f and the resulting decrease in dissolved oxygen capacity ΔDO\Delta \text{DO} in mg/L\text{mg/L}.

Answer and steps

Final answer

Tf=6.02 ∘CT_f = 6.02\text{ }^\circ\text{C}, ΔDO=1.91 mg/L\Delta \text{DO} = 1.91\text{ mg/L}

Steps

01

Calculate the Total Mass of Lake Water

The total mass of the lake water, mm, is determined from its volume VV and density ρ\rho:

m=ρ⋅Vm = \rho \cdot V

Substitute the given values:

m=(1000 kg/m3)⋅(4.50×107 m3)=4.50×1010 kgm = (1000\text{ kg/m}^3) \cdot (4.50 \times 10^7\text{ m}^3) = 4.50 \times 10^{10}\text{ kg}


02

Determine the Temperature Increase and Final Temperature

The relationship between the absorbed thermal energy QQ, mass mm, specific heat capacity cc, and temperature change ΔT\Delta T is:

Q=m⋅c⋅ΔTQ = m \cdot c \cdot \Delta T

Rearranging to solve for the temperature rise ΔT\Delta T:

ΔT=Qm⋅c\Delta T = \frac{Q}{m \cdot c}

Substitute the values:

ΔT=9.45×1014 J(4.50×1010 kg)⋅(4184 J/(kg⋅∘C))\Delta T = \frac{9.45 \times 10^{14}\text{ J}}{(4.50 \times 10^{10}\text{ kg}) \cdot (4184\text{ J}/(\text{kg}\cdot{^\circ\text{C}}))}

ΔT=9.45×10141.8828×1014 ∘C≈5.019 ∘C\Delta T = \frac{9.45 \times 10^{14}}{1.8828 \times 10^{14}}\text{ }^\circ\text{C} \approx 5.019\text{ }^\circ\text{C}

Now calculate the final equilibrium temperature TfT_f:

Tf=Ti+ΔT=1.00 ∘C+5.019 ∘C≈6.02 ∘CT_f = T_i + \Delta T = 1.00\text{ }^\circ\text{C} + 5.019\text{ }^\circ\text{C} \approx 6.02\text{ }^\circ\text{C}


03

Calculate the Decrease in Dissolved Oxygen Capacity

The dissolved oxygen saturation capacity function is linear:

DOsat(T)=14.6−0.380⋅T\text{DO}_{\text{sat}}(T) = 14.6 - 0.380 \cdot T

Because the relationship is linear, the magnitude of the decrease in dissolved oxygen capacity ΔDO\Delta \text{DO} depends directly on the temperature increase ΔT\Delta T:

ΔDO=DOsat(Ti)−DOsat(Tf)=0.380⋅ΔT\Delta \text{DO} = \text{DO}_{\text{sat}}(T_i) - \text{DO}_{\text{sat}}(T_f) = 0.380 \cdot \Delta T

Substitute the value of ΔT\Delta T:

ΔDO=0.380 mg/(L⋅∘C)⋅5.019 ∘C≈1.91 mg/L\Delta \text{DO} = 0.380\text{ mg}/(\text{L}\cdot{^\circ\text{C}}) \cdot 5.019\text{ }^\circ\text{C} \approx 1.91\text{ mg/L}

Direct check using endpoints:

  • Initial saturation at 1.00 ∘C1.00\text{ }^\circ\text{C}: DOsat(1.00)=14.6−0.380(1.00)=14.22 mg/L\text{DO}_{\text{sat}}(1.00) = 14.6 - 0.380(1.00) = 14.22\text{ mg/L}
  • Final saturation at 6.02 ∘C6.02\text{ }^\circ\text{C}: DOsat(6.02)=14.6−0.380(6.019)≈12.31 mg/L\text{DO}_{\text{sat}}(6.02) = 14.6 - 0.380(6.019) \approx 12.31\text{ mg/L}
  • Difference: ΔDO=14.22 mg/L−12.31 mg/L=1.91 mg/L\Delta \text{DO} = 14.22\text{ mg/L} - 12.31\text{ mg/L} = 1.91\text{ mg/L}

Ecological Context & Common Pitfall: As water temperature rises, gas solubility decreases because thermal kinetic energy allows dissolved gas molecules to escape into the atmosphere more readily. When calculating ΔDO\Delta \text{DO}, ensure not to subtract in reverse—the question asks for the resulting decrease (a positive magnitude of loss).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the temperature change ΔT with the final temperature T_f, failing to add the initial temperature of 1.00 °C.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=1000×(4.50×107)=4.50×1010 kgm = 1000 \times (4.50 \times 10^7) = 4.50 \times 10^{10}\text{ kg}

  2. Step 2

    ΔT=Qm⋅c=9.45×10144.50×1010×4184  ⟹  ΔT=5.02 ∘C\Delta T = \frac{Q}{m \cdot c} = \frac{9.45 \times 10^{14}}{4.50 \times 10^{10} \times 4184} \implies \Delta T = 5.02\text{ }^\circ\text{C}

  3. Step 3

    Tf=5.02 ∘CT_f = 5.02\text{ }^\circ\text{C}

    Correct

    Tf=Ti+ΔT=1.00 ∘C+5.02 ∘C=6.02 ∘CT_f = T_i + \Delta T = 1.00\text{ }^\circ\text{C} + 5.02\text{ }^\circ\text{C} = 6.02\text{ }^\circ\text{C}

    You set the final equilibrium temperature equal to the temperature increase ΔT\Delta T. Remember to add the initial temperature Ti=1.00 ∘CT_i = 1.00\text{ }^\circ\text{C} to find the final state.

  4. Step 4

    ΔDO=0.380×5.02  ⟹  ΔDO=1.91 mg/L\Delta \text{DO} = 0.380 \times 5.02 \implies \Delta \text{DO} = 1.91\text{ mg/L}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total mass of the lake water from its volume and density.

You correctly rearranged and evaluated the thermal energy equation to find the temperature change ΔT\Delta T.

You recognized that the decrease in dissolved oxygen capacity is directly proportional to ΔT\Delta T and computed it accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
State Variable vs. Change Variable Confusion

You solved for the temperature change ΔT=5.02 ∘C\Delta T = 5.02\text{ }^\circ\text{C} and wrote it directly as the final temperature TfT_f, forgetting to account for the starting temperature Ti=1.00 ∘CT_i = 1.00\text{ }^\circ\text{C}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a change in a state variable (ΔT\Delta T) with the final absolute value of that variable (TfT_f). Whenever a system starts at an initial condition other than zero, the final state requires Tf=Ti+ΔTT_f = T_i + \Delta T.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Change from Final State
  • Tf=Ti+ΔTT_f = T_i + \Delta T

  • Check the initial temperature given in the problem statement before writing down the final temperature.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the given initial water temperature: Ti=1.00 ∘CT_i = 1.00\text{ }^\circ\text{C}.

  2. Add the calculated temperature increase ΔT=5.019 ∘C\Delta T = 5.019\text{ }^\circ\text{C} to the initial temperature: Tf=1.00 ∘C+5.019 ∘C=6.02 ∘CT_f = 1.00\text{ }^\circ\text{C} + 5.019\text{ }^\circ\text{C} = 6.02\text{ }^\circ\text{C}.

Final answer

Tf=6.02 ∘C, ΔDO=1.91 mg/LT_f = 6.02\text{ }^\circ\text{C},\ \Delta \text{DO} = 1.91\text{ mg/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always circle or list initial boundary conditions (TiT_i, PiP_i, ViV_i) at the start of your scratch work.

  • After calculating a delta (ΔX\Delta X), explicitly write the relationship Xf=Xi+ΔXX_f = X_i + \Delta X before reporting the final value.

OverviewACEpath Teacher's Diagnosis

02 The student reports the final dissolved oxygen concentration instead of the decrease in dissolved oxygen capacity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=1000×(4.50×107)=4.50×1010 kgm = 1000 \times (4.50 \times 10^7) = 4.50 \times 10^{10}\text{ kg}

  2. Step 2

    ΔT=9.45×10144.50×1010×4184=5.02 ∘C\Delta T = \frac{9.45 \times 10^{14}}{4.50 \times 10^{10} \times 4184} = 5.02\text{ }^\circ\text{C}

  3. Step 3

    Tf=1.00+5.02=6.02 ∘CT_f = 1.00 + 5.02 = 6.02\text{ }^\circ\text{C}

  4. Step 4

    DOsat(6.02)=14.6−0.380×6.02⟹DOsat(6.02)=14.6−2.29=12.31 mg/L\text{DO}_{\text{sat}}(6.02) = 14.6 - 0.380 \times 6.02 \Longrightarrow \text{DO}_{\text{sat}}(6.02) = 14.6 - 2.29 = 12.31\text{ mg/L}

  5. Step 5

    ΔDO=12.31 mg/L\Delta \text{DO} = 12.31\text{ mg/L}

    Correct

    ΔDO=DOsat(Ti)−DOsat(Tf)=14.22 mg/L−12.31 mg/L=1.91 mg/L\Delta \text{DO} = \text{DO}_{\text{sat}}(T_i) - \text{DO}_{\text{sat}}(T_f) = 14.22\text{ mg/L} - 12.31\text{ mg/L} = 1.91\text{ mg/L}

    You equated the final saturation concentration with the decrease in capacity. The decrease ΔDO\Delta \text{DO} requires subtracting the final dissolved oxygen capacity from the initial capacity (or directly computing 0.380⋅ΔT0.380 \cdot \Delta T).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the lake water mass using density and volume.

You accurately solved for the temperature rise and final equilibrium temperature using thermal energy.

You correctly evaluated the saturation capacity at the final temperature using the linear model.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Final value reported instead of change

You equated the remaining dissolved oxygen concentration at the final temperature with the net decrease in dissolved oxygen.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute final state value of an ecological parameter with the magnitude of change (Δ\Delta) experienced by the system.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Value from Change
  • A parameter at an endpoint X(Tf)X(T_f) represents the absolute final level, whereas a change or loss ΔX\Delta X represents the difference between initial and final states: ΔX=∣X(Ti)−X(Tf)∣\Delta X = |X(T_i) - X(T_f)|.

  • Always double-check whether the prompt asks for the final remaining level or the amount by which that level decreased.

Linear Rate of Change Shortcut
  • For a linear function y(x)=y0−k⋅xy(x) = y_0 - k \cdot x, the change in yy over an interval Δx\Delta x is directly Δy=k⋅Δx\Delta y = k \cdot \Delta x.

  • When the relationship is linear, multiply the slope magnitude directly by ΔT\Delta T (0.380×5.02 ∘C≈1.91 mg/L0.380 \times 5.02\text{ }^\circ\text{C} \approx 1.91\text{ mg/L}) to quickly find the decrease.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the initial dissolved oxygen capacity: DOsat(1.00)=14.6−0.380(1.00)=14.22 mg/L\text{DO}_{\text{sat}}(1.00) = 14.6 - 0.380(1.00) = 14.22\text{ mg/L}.

  2. Subtract the final saturation capacity from the initial value to obtain the decrease: ΔDO=14.22 mg/L−12.31 mg/L=1.91 mg/L\Delta \text{DO} = 14.22\text{ mg/L} - 12.31\text{ mg/L} = 1.91\text{ mg/L}.

Final answer

Tf=6.02 ∘C, ΔDO=1.91 mg/LT_f = 6.02\text{ }^\circ\text{C},\ \Delta \text{DO} = 1.91\text{ mg/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between calculating a state variable at time tt versus calculating the delta (difference) between states.

  • Practice computing changes directly using the slope of linear functions: Δy=m⋅Δx\Delta y = m \cdot \Delta x.

OverviewACEpath Teacher's Diagnosis

03 The student evaluates the decrease in DO capacity using the final temperature T_f in the linear slope term instead of the temperature change ΔT.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=1000×(4.50×107)=4.50×1010 kgm = 1000 \times (4.50 \times 10^7) = 4.50 \times 10^{10}\text{ kg}

  2. Step 2

    ΔT=9.45×10144.50×1010×4184=5.02 ∘C\Delta T = \frac{9.45 \times 10^{14}}{4.50 \times 10^{10} \times 4184} = 5.02\text{ }^\circ\text{C}

  3. Step 3

    Tf=1.00+5.02=6.02 ∘CT_f = 1.00 + 5.02 = 6.02\text{ }^\circ\text{C}

  4. Step 4

    ΔDO=0.380×Tf  ⟹  ΔDO=2.29 mg/L\Delta \text{DO} = 0.380 \times T_f \implies \Delta \text{DO} = 2.29\text{ mg/L}

    Correct

    ΔDO=0.380×ΔT=0.380 mg/(L⋅∘C)×5.02 ∘C≈1.91 mg/L\Delta \text{DO} = 0.380 \times \Delta T = 0.380\text{ mg}/(\text{L}\cdot{^\circ\text{C}}) \times 5.02\text{ }^\circ\text{C} \approx 1.91\text{ mg/L}

    Because dissolved oxygen capacity is a linear function of temperature, the decrease ΔDO\Delta \text{DO} is proportional to the change in temperature ΔT\Delta T, not the absolute final temperature TfT_f.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the lake water mass using density and volume.

You applied the heat energy equation accurately to find the temperature increase.

You determined the correct final water temperature by adding the change to the initial temperature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Used absolute final value instead of change

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You evaluated the rate of loss across the absolute temperature TfT_f rather than the temperature interval ΔT=Tf−Ti\Delta T = T_f - T_i. Because the initial temperature was 1.00 ∘C1.00\text{ }^\circ\text{C} rather than 0 ∘C0\text{ }^\circ\text{C}, multiplying the rate 0.3800.380 by TfT_f overestimates the oxygen lost during this warming event.

REASONING PATH
Your ACEpath teacher’s suggested approach
Change vs. Absolute Value in Linear Functions
  • For any linear relationship y=y0−k⋅Ty = y_0 - k \cdot T, the change in value over a temperature shift is Δy=k⋅ΔT=k⋅(Tf−Ti)\Delta y = k \cdot \Delta T = k \cdot (T_f - T_i), never k⋅Tfk \cdot T_f unless Ti=0T_i = 0.

  • Always write ΔDO=DO(Ti)−DO(Tf)\Delta \text{DO} = \text{DO}(T_i) - \text{DO}(T_f) or use 0.380⋅ΔT0.380 \cdot \Delta T directly to ensure you are scaling by the temperature difference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that ΔDO=DOsat(Ti)−DOsat(Tf)=(14.6−0.380⋅Ti)−(14.6−0.380⋅Tf)=0.380⋅(Tf−Ti)=0.380⋅ΔT\Delta \text{DO} = \text{DO}_{\text{sat}}(T_i) - \text{DO}_{\text{sat}}(T_f) = (14.6 - 0.380 \cdot T_i) - (14.6 - 0.380 \cdot T_f) = 0.380 \cdot (T_f - T_i) = 0.380 \cdot \Delta T.

  2. Substitute ΔT=5.019 ∘C\Delta T = 5.019\text{ }^\circ\text{C}: ΔDO=0.380×5.019≈1.91 mg/L\Delta \text{DO} = 0.380 \times 5.019 \approx 1.91\text{ mg/L}.

Final answer

Tf=6.02 ∘CT_f = 6.02\text{ }^\circ\text{C}, ΔDO=1.91 mg/L\Delta \text{DO} = 1.91\text{ mg/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to compute changes Δy\Delta y for linear functions by subtracting initial from final values.

  • Practice distinguishing between absolute state variables (TfT_f) and transition variables (ΔT\Delta T) in thermodynamics and environmental modeling.

Lock it in

Similar question

01

A pond contains 2.00×106 kg2.00 \times 10^6\text{ kg} of water initially at 3.00 ∘C3.00\text{ }^\circ\text{C}. It absorbs 2.51×1010 J2.51 \times 10^{10}\text{ J} of net solar radiation. Using c=4184 J/(kg⋅∘C)c = 4184\text{ J}/(\text{kg}\cdot{^\circ\text{C}}), calculate the temperature increase ΔT\Delta T and the final temperature TfT_f.

Answer

ΔT=3.00 ∘C\Delta T = 3.00\text{ }^\circ\text{C}, Tf=6.00 ∘CT_f = 6.00\text{ }^\circ\text{C}. Steps: ΔT=Qmc=2.51×1010(2.00×106)(4184)≈3.00 ∘C\Delta T = \frac{Q}{m c} = \frac{2.51 \times 10^{10}}{(2.00 \times 10^6)(4184)} \approx 3.00\text{ }^\circ\text{C}. Then Tf=Ti+ΔT=3.00 ∘C+3.00 ∘C=6.00 ∘CT_f = T_i + \Delta T = 3.00\text{ }^\circ\text{C} + 3.00\text{ }^\circ\text{C} = 6.00\text{ }^\circ\text{C}.

02

An alpine stream with an initial temperature of 2.50 ∘C2.50\text{ }^\circ\text{C} experiences a heat influx that raises its temperature by ΔT=4.20 ∘C\Delta T = 4.20\text{ }^\circ\text{C}. The dissolved oxygen capacity follows DOsat(T)=14.6−0.350⋅T\text{DO}_{\text{sat}}(T) = 14.6 - 0.350 \cdot T (in mg/L\text{mg/L}). Calculate the final water temperature TfT_f and the final oxygen capacity DOsat(Tf)\text{DO}_{\text{sat}}(T_f).

Answer

Tf=6.70 ∘CT_f = 6.70\text{ }^\circ\text{C}, DOsat(Tf)=12.26 mg/L\text{DO}_{\text{sat}}(T_f) = 12.26\text{ mg/L}. Steps: Tf=Ti+ΔT=2.50+4.20=6.70 ∘CT_f = T_i + \Delta T = 2.50 + 4.20 = 6.70\text{ }^\circ\text{C}. Final dissolved oxygen is DOsat(6.70)=14.6−0.350(6.70)=14.6−2.345=12.255 mg/L≈12.26 mg/L\text{DO}_{\text{sat}}(6.70) = 14.6 - 0.350(6.70) = 14.6 - 2.345 = 12.255\text{ mg/L} \approx 12.26\text{ mg/L}.

03

A coastal estuary holds 8.00×107 m38.00 \times 10^7\text{ m}^3 of water (density 1025 kg/m31025\text{ kg/m}^3, c=4000 J/(kg⋅∘C)c = 4000\text{ J}/(\text{kg}\cdot{^\circ\text{C}})) at 12.0 ∘C12.0\text{ }^\circ\text{C}. Over a heatwave, it absorbs 1.64×1015 J1.64 \times 10^{15}\text{ J} of thermal energy. If the oxygen saturation capacity changes at a rate of −0.280 mg/(L⋅∘C)-0.280\text{ mg}/(\text{L}\cdot{^\circ\text{C}}), find the final temperature TfT_f and the absolute decrease in oxygen capacity ΔDO\Delta \text{DO}.

Answer

Tf=17.0 ∘CT_f = 17.0\text{ }^\circ\text{C}, ΔDO=1.40 mg/L\Delta \text{DO} = 1.40\text{ mg/L}. Steps: m=ρV=1025×8.00×107=8.20×1010 kgm = \rho V = 1025 \times 8.00 \times 10^7 = 8.20 \times 10^{10}\text{ kg}. ΔT=Qmc=1.64×1015(8.20×1010)(4000)=5.00 ∘C\Delta T = \frac{Q}{m c} = \frac{1.64 \times 10^{15}}{(8.20 \times 10^{10})(4000)} = 5.00\text{ }^\circ\text{C}. Final temperature Tf=12.0+5.00=17.0 ∘CT_f = 12.0 + 5.00 = 17.0\text{ }^\circ\text{C}. The loss in dissolved oxygen capacity is ΔDO=0.280×5.00=1.40 mg/L\Delta \text{DO} = 0.280 \times 5.00 = 1.40\text{ mg/L}.

Loading workspace…