Resources

A neurobiologist measures the intracellular and extracellular concentrations of chloride ions (Cl−\text{Cl}^-, valence z=−1z = -1) in a mammalian neuron at T=310 KT = 310\text{ K}: [Cl−]in=10.0 mM[\text{Cl}^-]_{\text{in}} = 10.0\text{ mM} and [Cl−]out=110.0 mM[\text{Cl}^-]_{\text{out}} = 110.0\text{ mM}. The membrane potential is Vm=−65.0 mVV_m = -65.0\text{ mV} (relative to extracellular fluid). Using R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) and F=96485 C/molF = 96485\text{ C/mol}: (a) Calculate the Nernst equilibrium potential for chloride, EClE_{\text{Cl}} (in mV\text{mV}). (b) Calculate the molar electrochemical free energy change ΔGin\Delta G_{\text{in}} (in kJ/mol\text{kJ/mol}) for the transport of Cl−\text{Cl}^- from the outside into the inside of the cell, explicitly observing proper sign conventions for zz and VmV_m. (c) Based on the sign of ΔGin\Delta G_{\text{in}}, state whether the net entry of Cl−\text{Cl}^- through open ligand-gated chloride channels is passive or active.

Answer and steps

Final answer

(a) ECl=−64.1 mVE_{\text{Cl}} = -64.1\text{ mV}; (b) ΔGin=+0.088 kJ/mol\Delta G_{\text{in}} = +0.088\text{ kJ/mol}; (c) Net entry of Cl−\text{Cl}^- into the cell under these conditions is non-spontaneous (DeltaGin>0\\Delta G_{\text{in}} > 0), so passive channel opening results in net outward efflux; moving Cl−\text{Cl}^- inward requires active transport.

Steps

Part (a): Nernst Equilibrium Potential for ClX−\ce{Cl^-}

The Nernst potential (EClE_{\ce{Cl}}) is the membrane potential at which the chemical concentration gradient and the electrical gradient for an ion are balanced, yielding zero net flux. The Nernst equation is:

ECl=RTzFln⁡([ClX−]out[ClX−]in)E_{\ce{Cl}} = \frac{RT}{zF} \ln\left(\frac{[\ce{Cl^-}]_{\text{out}}}{[\ce{Cl^-}]_{\text{in}}}\right)

Given values:

  • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})
  • T=310 KT = 310\text{ K}
  • Valence for chloride: z=−1z = -1
  • Faraday's constant: F=96485 C/molF = 96485\text{ C/mol}
  • [ClX−]in=10.0 mM[\ce{Cl^-}]_{\text{in}} = 10.0\text{ mM}
  • [ClX−]out=110.0 mM[\ce{Cl^-}]_{\text{out}} = 110.0\text{ mM}

First, evaluate the thermal voltage factor:

RTF=8.314×31096485≈0.026712 V=26.712 mV\frac{RT}{F} = \frac{8.314 \times 310}{96485} \approx 0.026712\text{ V} = 26.712\text{ mV}

Next, evaluate the concentration ratio:

ln⁡(110.010.0)=ln⁡(11)≈2.3979\ln\left(\frac{110.0}{10.0}\right) = \ln(11) \approx 2.3979

Substitute these into the equation with z=−1z = -1:

ECl=26.712 mV−1×2.3979≈−64.05 mV≈−64.1 mVE_{\ce{Cl}} = \frac{26.712\text{ mV}}{-1} \times 2.3979 \approx -64.05\text{ mV} \approx -64.1\text{ mV}


Part (b): Molar Electrochemical Free Energy Change (ΔGin\Delta G_{\text{in}})

The free energy change per mole for transporting an ion from the extracellular fluid into the cytoplasm (outside→inside\text{outside} \rightarrow \text{inside}) consists of a chemical component and an electrical component:

ΔGin=ΔGchem+ΔGelec=RTln⁡([ClX−]in[ClX−]out)+zFVm\Delta G_{\text{in}} = \Delta G_{\text{chem}} + \Delta G_{\text{elec}} = RT \ln\left(\frac{[\ce{Cl^-}]_{\text{in}}}{[\ce{Cl^-}]_{\text{out}}}\right) + z F V_m

Alternatively, this is expressed directly in terms of the driving force (Vm−ECl)(V_m - E_{\ce{Cl}}):

ΔGin=zF(Vm−ECl)\Delta G_{\text{in}} = z F (V_m - E_{\ce{Cl}})

  1. Chemical potential term (ΔGchem\Delta G_{\text{chem}}): ΔGchem=8.314×310×ln⁡(10.0110.0)=2577.34×(−2.3979)≈−6180.2 J/mol=−6.180 kJ/mol\Delta G_{\text{chem}} = 8.314 \times 310 \times \ln\left(\frac{10.0}{110.0}\right) = 2577.34 \times (-2.3979) \approx -6180.2\text{ J/mol} = -6.180\text{ kJ/mol} The negative value indicates that the concentration gradient favors movement into the cell.
  2. Electrical potential term (ΔGelec\Delta G_{\text{elec}}): With z=−1z = -1 and Vm=−65.0 mV=−0.0650 VV_m = -65.0\text{ mV} = -0.0650\text{ V}: ΔGelec=(−1)×96485 C/mol×(−0.0650 V)=+6271.5 J/mol=+6.272 kJ/mol\Delta G_{\text{elec}} = (-1) \times 96485\text{ C/mol} \times (-0.0650\text{ V}) = +6271.5\text{ J/mol} = +6.272\text{ kJ/mol} The negative interior repels the negatively charged chloride ion, opposing entry.
  3. Total electrochemical free energy change (ΔGin\Delta G_{\text{in}}): ΔGin=−6180.2 J/mol+6271.5 J/mol≈+91.3 J/mol≈+0.088 kJ/mol\Delta G_{\text{in}} = -6180.2\text{ J/mol} + 6271.5\text{ J/mol} \approx +91.3\text{ J/mol} \approx +0.088\text{ kJ/mol} (Using the rounded ECl=−64.1 mVE_{\ce{Cl}} = -64.1\text{ mV} gives zF(Vm−ECl)=(−1)(96485)(−0.0650−(−0.0641))≈+0.087 to +0.088 kJ/molzF(V_m - E_{\ce{Cl}}) = (-1)(96485)(-0.0650 - (-0.0641)) \approx +0.087\text{ to }+0.088\text{ kJ/mol}.)

Common Pitfall: Forgetting the negative sign on the valence (z=−1z = -1) causes an erroneous sign for both EClE_{\ce{Cl}} and the electrical work component, incorrectly suggesting that the negative membrane potential pulls anions into the cell.


Part (c): Direction and Energetics of Transport

  • Because ΔGin>0\Delta G_{\text{in}} > 0, the transport of ClX−\ce{Cl^-} from outside to inside is endergonic (non-spontaneous).
  • Under these conditions, the electrical repulsion from the interior (−65.0 mV-65.0\text{ mV}) slightly exceeds the inward chemical drive (ECl=−64.1 mVE_{\ce{Cl}} = -64.1\text{ mV}).
  • Consequently, when passive ligand-gated ClX−\ce{Cl^-} channels open, ClX−\ce{Cl^-} ions spontaneously exit the cell (efflux, ΔGout<0\Delta G_{\text{out}} < 0). Moving ClX−\ce{Cl^-} into the cell against this net electrochemical gradient requires active transport.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the valence of chloride as positive 1 instead of negative 1 in the Nernst equation, giving an equilibrium potential with the wrong sign.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ECl=8.314×3101×96485×ln⁡(110.010.0)  ⟹  ECl=26.71 mV×2.398=+64.1 mVE_{\text{Cl}} = \frac{8.314 \times 310}{1 \times 96485} \times \ln\left(\frac{110.0}{10.0}\right) \implies E_{\text{Cl}} = 26.71\text{ mV} \times 2.398 = +64.1\text{ mV}

    Correct

    ECl=RTzFln⁡([Cl−]out[Cl−]in)=8.314×310(−1)×96485ln⁡(11)≈−64.1 mVE_{\text{Cl}} = \frac{RT}{zF}\ln\left(\frac{[\text{Cl}^-]_{\text{out}}}{[\text{Cl}^-]_{\text{in}}}\right) = \frac{8.314 \times 310}{(-1) \times 96485}\ln(11) \approx -64.1\text{ mV}

    You substituted z=1z = 1 in the denominator of the Nernst equation. Because chloride is an anion with valence z=−1z = -1, the factor is divided by −1-1, yielding an equilibrium potential of −64.1 mV-64.1\text{ mV} rather than +64.1 mV+64.1\text{ mV}.

  2. Step 2

    ΔGin=8.314×310×ln⁡(10.0110.0)+(−1)×96485×(−0.0650)  ⟹  ΔGin=−6180 J/mol+6272 J/mol=+92 J/mol=+0.092 kJ/mol\Delta G_{\text{in}} = 8.314 \times 310 \times \ln\left(\frac{10.0}{110.0}\right) + (-1) \times 96485 \times (-0.0650) \implies \Delta G_{\text{in}} = -6180\text{ J/mol} + 6272\text{ J/mol} = +92\text{ J/mol} = +0.092\text{ kJ/mol}

  3. Step 3

    Because ΔGin is positive, net entry is active.\text{Because } \Delta G_{\text{in}} \text{ is positive, net entry is active.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the concentration ratio and standard constants in the Nernst equation.

You correctly observed both the negative valence and negative membrane potential when calculating the electrical work term in part (b).

You accurately interpreted the thermodynamic criterion linking ΔG>0\Delta G > 0 to active transport in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error on Ion Valence in Nernst Equation

You remembered that chloride has z=−1z = -1 when evaluating the electrical work term zFVmzFV_m, but omitted the negative sign in the denominator of the Nernst equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating valence as an absolute magnitude rather than a signed integer in the Nernst formula leads to inverted equilibrium potentials for anions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ion Valence Sign Rule
  • For any ion XzX^{z}, the valence zz carries an algebraic sign: z>0z > 0 for cations (e.g., Na+,K+,Ca2+\text{Na}^+, \text{K}^+, \text{Ca}^{2+}) and z<0z < 0 for anions (e.g., Cl−\text{Cl}^- with z=−1z = -1).

  • Always write down z=−1z = -1 explicitly in the denominator before multiplying out the Nernst constant.

Qualitative Equilibrium Check
  • For an anion concentrated outside ([A−]out>[A−]in[\text{A}^-]_{\text{out}} > [\text{A}^-]_{\text{in}}), the chemical concentration gradient pushes anions inward. To balance this, the cell interior must be negative relative to the outside, meaning EionE_{\text{ion}} must be negative.

  • Check whether the sign of EionE_{\text{ion}} repels the concentration gradient: if the concentration gradient drives negative charge in, the equilibrium potential must be negative to oppose it.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the ion valence: for chloride (Cl−\text{Cl}^-), z=−1z = -1.

  2. Substitute into the Nernst equation: ECl=RTzFln⁡([Cl−]out[Cl−]in)=26.712 mV−1ln⁡(110.010.0)E_{\text{Cl}} = \frac{RT}{zF} \ln\left(\frac{[\text{Cl}^-]_{\text{out}}}{[\text{Cl}^-]_{\text{in}}}\right) = \frac{26.712\text{ mV}}{-1} \ln\left(\frac{110.0}{10.0}\right).

  3. Evaluate the quotient: ECl=−26.712 mV×2.398≈−64.1 mVE_{\text{Cl}} = -26.712\text{ mV} \times 2.398 \approx -64.1\text{ mV}.

Final answer

ECl=−64.1 mVE_{\text{Cl}} = -64.1\text{ mV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Nernst equation for anions versus cations, noting how an inward concentration gradient yields a positive equilibrium potential for cations but a negative equilibrium potential for anions.

  • Practice using the shortcut form Eion=61.5 mVzlog⁡10([ion]out[ion]in)E_{\text{ion}} = \frac{61.5\text{ mV}}{z}\log_{10}\left(\frac{[\text{ion}]_{\text{out}}}{[\text{ion}]_{\text{in}}}\right) at 310 K310\text{ K}, explicitly checking the sign of zz.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the negative valence of chloride when calculating the electrical work term, making it negative and resulting in a large negative free energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ECl=8.314×310−1×96485×ln⁡(110.010.0)  ⟹  ECl=−26.71 mV×2.398=−64.1 mVE_{\text{Cl}} = \frac{8.314 \times 310}{-1 \times 96485} \times \ln\left(\frac{110.0}{10.0}\right) \implies E_{\text{Cl}} = -26.71\text{ mV} \times 2.398 = -64.1\text{ mV}

  2. Step 2

    ΔGin=8.314×310×ln⁡(10.0110.0)+1×96485×(−0.0650)  ⟹  ΔGin=−6180 J/mol−6272 J/mol=−12452 J/mol=−12.5 kJ/mol\Delta G_{\text{in}} = 8.314 \times 310 \times \ln\left(\frac{10.0}{110.0}\right) + 1 \times 96485 \times (-0.0650) \implies \Delta G_{\text{in}} = -6180\text{ J/mol} - 6272\text{ J/mol} = -12452\text{ J/mol} = -12.5\text{ kJ/mol}

    Correct

    ΔGin=RTln⁡([Cl−]in[Cl−]out)+zFVm=−6180 J/mol+(−1)(96485)(−0.0650) J/mol=−6180+6272=+92 J/mol≈+0.088 kJ/mol\Delta G_{\text{in}} = RT \ln\left(\frac{[\text{Cl}^-]_{\text{in}}}{[\text{Cl}^-]_{\text{out}}}\right) + zFV_m = -6180\text{ J/mol} + (-1)(96485)(-0.0650)\text{ J/mol} = -6180 + 6272 = +92\text{ J/mol} \approx +0.088\text{ kJ/mol}

    You used z=+1z = +1 instead of z=−1z = -1 in the electrical work term zFVmzFV_m. Because chloride is an anion moving into a cell with a negative interior potential (Vm=−65.0 mVV_m = -65.0\text{ mV}), the two negative signs cancel to give a positive electrical penalty (+6272 J/mol+6272\text{ J/mol}), making total ΔGin\Delta G_{\text{in}} positive.

  3. Step 3

    Because ΔGin is negative, net entry is passive.\text{Because } \Delta G_{\text{in}} \text{ is negative, net entry is passive.}

    Correct

    Because ΔGin>0, net entry into the cell is non-spontaneous and requires active transport; passive channel opening causes net efflux.\text{Because } \Delta G_{\text{in}} > 0\text{, net entry into the cell is non-spontaneous and requires active transport; passive channel opening causes net efflux.}

    Your reasoning that a negative ΔG\Delta G corresponds to passive transport is conceptually sound, but it inherits the sign error from part (b). Since the true ΔGin\Delta G_{\text{in}} is positive (+0.088 kJ/mol+0.088\text{ kJ/mol}), net influx cannot occur passively under these conditions.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up and evaluated the Nernst equilibrium potential for chloride correctly with the proper negative valence.

You correctly calculated the chemical potential energy component ΔGchem=−6.18 kJ/mol\Delta G_{\text{chem}} = -6.18\text{ kJ/mol}.

You correctly associated the sign of free energy change with the spontaneity of passive transport.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Valence sign omission in electrical work

You wrote z=+1z = +1 instead of z=−1z = -1 in the zFVmzFV_m term.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the valence zz as an unsigned magnitude in the electrical potential term, overlooking that moving a negative ion into a negative compartment is electrically unfavorable and must yield a positive ΔGelec\Delta G_{\text{elec}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Sense Check on Electrical Work
  • Like charges repel; pushing an anion (z<0z < 0) into a negative intracellular space (Vm<0V_m < 0) requires positive electrical work: ΔGelec=zFVm=(−)(+)(−)>0\Delta G_{\text{elec}} = z F V_m = (-)(+)(-) > 0.

  • Always verify that your computed ΔGelec\Delta G_{\text{elec}} matches the electrostatic repulsion or attraction expected from the ion charge and membrane polarity.

Alternative Driving Force Formula
  • The electrochemical free energy change can be calculated as ΔGin=zF(Vm−Eion)\Delta G_{\text{in}} = z F (V_m - E_{\text{ion}}).

  • Check your result by comparing VmV_m with EionE_{\text{ion}}: for Cl−\text{Cl}^-, Vm=−65.0 mVV_m = -65.0\text{ mV} is more negative than ECl=−64.1 mVE_{\text{Cl}} = -64.1\text{ mV}, so (−1)(F)(−65.0−(−64.1)) mV=(−1)(F)(−0.9 mV)>0(-1)(F)(-65.0 - (-64.1))\text{ mV} = (-1)(F)(-0.9\text{ mV}) > 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute z=−1z = -1 into the electrical term: ΔGelec=zFVm=(−1)(96485 C/mol)(−0.0650 V)=+6271.5 J/mol=+6.272 kJ/mol\Delta G_{\text{elec}} = zFV_m = (-1)(96485\text{ C/mol})(-0.0650\text{ V}) = +6271.5\text{ J/mol} = +6.272\text{ kJ/mol}.

  2. Sum the chemical and electrical components: ΔGin=−6.180 kJ/mol+6.272 kJ/mol=+0.088 kJ/mol\Delta G_{\text{in}} = -6.180\text{ kJ/mol} + 6.272\text{ kJ/mol} = +0.088\text{ kJ/mol} (or +91.3 J/mol+91.3\text{ J/mol}).

  3. Interpret the sign: because ΔGin>0\Delta G_{\text{in}} > 0, inward movement is non-spontaneous. Net entry requires active transport, whereas opening passive channels causes net efflux.

Final answer

(a) ECl=−64.1 mVE_{\text{Cl}} = -64.1\text{ mV}; (b) ΔGin=+0.088 kJ/mol\Delta G_{\text{in}} = +0.088\text{ kJ/mol}; (c) Active transport (passive opening leads to net outward efflux).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign convention for ionic valence zz across both Nernst and free-energy equations.

  • Practice using the driving force relationship ΔG=zF(Vm−Eion)\Delta G = zF(V_m - E_{\text{ion}}) as a quick check against component summation.

  • Complete the follow-up practice exercises to master predicting ion fluxes across polarized membranes.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the concentration ratio in the chemical work term, computing ln(110/10) instead of ln(10/110) for inward transport, leading to an incorrect positive chemical energy and total free energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ECl=8.314×310(−1×96485)×ln⁡(110.010.0)  ⟹  ECl=−26.71 mV×2.398=−64.1 mVE_{\text{Cl}} = \frac{8.314 \times 310}{(-1 \times 96485)} \times \ln\left(\frac{110.0}{10.0}\right) \implies E_{\text{Cl}} = -26.71\text{ mV} \times 2.398 = -64.1\text{ mV}

  2. Step 2

    ΔGin=8.314×310×ln⁡(110.010.0)+(−1)×96485×(−0.0650)  ⟹  ΔGin=+6180 J/mol+6272 J/mol=+12.5 kJ/mol\Delta G_{\text{in}} = 8.314 \times 310 \times \ln\left(\frac{110.0}{10.0}\right) + (-1) \times 96485 \times (-0.0650) \implies \Delta G_{\text{in}} = +6180\text{ J/mol} + 6272\text{ J/mol} = +12.5\text{ kJ/mol}

    Correct

    ΔGin=RTln⁡([Cl−]in[Cl−]out)+zFVm=−6180.2 J/mol+6271.5 J/mol≈+0.088 kJ/mol\Delta G_{\text{in}} = RT \ln\left(\frac{[\text{Cl}^-]_{\text{in}}}{[\text{Cl}^-]_{\text{out}}}\right) + zFV_m = -6180.2\text{ J/mol} + 6271.5\text{ J/mol} \approx +0.088\text{ kJ/mol}

    For transport directed from the outside into the inside, the chemical free energy change is defined by ln⁡([ion]final[ion]initial)=ln⁡([Cl−]in[Cl−]out)\ln\left(\frac{[\text{ion}]_{\text{final}}}{[\text{ion}]_{\text{initial}}}\right) = \ln\left(\frac{[\text{Cl}^-]_{\text{in}}}{[\text{Cl}^-]_{\text{out}}}\right). Using ln⁡(110.010.0)\ln\left(\frac{110.0}{10.0}\right) inverted the direction, turning a favorable chemical concentration gradient (−6.18 kJ/mol-6.18\text{ kJ/mol}) into an unfavorable positive value.

  3. Step 3

    Because ΔGin is positive, net entry is active.\text{Because } \Delta G_{\text{in}} \text{ is positive, net entry is active.}

WHAT YOU DID WELL
Compliments from Your Teacher

You substituted the correct physical constants, valence, and membrane potential into both formulas.

You correctly calculated the Nernst potential for chloride, including the negative sign from the chloride valence.

You correctly linked a positive free energy change to the requirement for active transport.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted chemical gradient ratio in free energy calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the standard Nernst potential ratio [extion]out/[ion]in[ ext{ion}]_{\text{out}}/[\text{ion}]_{\text{in}} with the chemical reaction quotient for inward transport, which requires [extion]destination/[ion]origin=[ion]in/[ion]out[ ext{ion}]_{\text{destination}}/[\text{ion}]_{\text{origin}} = [\text{ion}]_{\text{in}}/[\text{ion}]_{\text{out}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define standard chemical potential change by flux direction
  • For any transport process from compartment A to compartment B, ΔGchem=RTln⁡(CdestinationCorigin)=RTln⁡(CBCA)\Delta G_{\text{chem}} = RT \ln\left(\frac{C_{\text{destination}}}{C_{\text{origin}}}\right) = RT \ln\left(\frac{C_{\text{B}}}{C_{\text{A}}}\right).

  • Always write down 'final over initial' explicitly before substituting numerical concentration values.

Check the sign of the concentration drive qualitatively
  • Molecules spontaneously diffuse down their chemical concentration gradient from high concentration to low concentration (yielding ΔGchem<0\Delta G_{\text{chem}} < 0).

  • Because [Cl−]out=110 mM>[Cl−]in=10 mM[\text{Cl}^-]_{\text{out}} = 110\text{ mM} > [\text{Cl}^-]_{\text{in}} = 10\text{ mM}, moving into the cell runs down the concentration gradient; verify that your calculated ΔGchem\Delta G_{\text{chem}} is negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the correct ratio for inward transport into the chemical work term: ΔGchem=8.314×310×ln⁡(10.0110.0)≈−6180.2 J/mol\Delta G_{\text{chem}} = 8.314 \times 310 \times \ln\left(\frac{10.0}{110.0}\right) \approx -6180.2\text{ J/mol}.

  2. Retain the correct electrical work term: ΔGelec=(−1)×96485×(−0.0650)≈+6271.5 J/mol\Delta G_{\text{elec}} = (-1) \times 96485 \times (-0.0650) \approx +6271.5\text{ J/mol}.

  3. Sum both terms to find the net molar free energy change: ΔGin=−6180.2+6271.5=+91.3 J/mol≈+0.088 kJ/mol\Delta G_{\text{in}} = -6180.2 + 6271.5 = +91.3\text{ J/mol} \approx +0.088\text{ kJ/mol}.

Final answer

(a) ECl=−64.1 mVE_{\text{Cl}} = -64.1\text{ mV}; (b) ΔGin=+0.088 kJ/mol\Delta G_{\text{in}} = +0.088\text{ kJ/mol}; (c) Because ΔGin>0\Delta G_{\text{in}} > 0, net entry into the cell is non-spontaneous and requires active transport.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the equilibrium condition in the Nernst equation and the non-equilibrium driving force formula ΔG=zF(Vm−Eion)\Delta G = zF(V_m - E_{\text{ion}}).

  • Practice calculating electrochemical gradients for cations and anions moving both inward and outward.

Lock it in

Similar question

01

A neuron has an intracellular bicarbonate concentration of [HCO3−]in=12.0 mM[\text{HCO}_3^-]_{\text{in}} = 12.0\text{ mM} and an extracellular concentration of [HCO3−]out=24.0 mM[\text{HCO}_3^-]_{\text{out}} = 24.0\text{ mM} at T=310 KT = 310\text{ K}. Given RTF≈26.71 mV\frac{RT}{F} \approx 26.71\text{ mV}, calculate the Nernst potential EHCO3E_{\text{HCO}_3} in mV\text{mV}.

Answer

EHCO3=−18.5 mVE_{\text{HCO}_3} = -18.5\text{ mV}. Key step: bicarbonate is a monovalent anion (z=−1z = -1), so E=26.71 mV−1ln⁡(24.012.0)=−26.71×ln⁡(2)≈−18.51 mVE = \frac{26.71\text{ mV}}{-1} \ln\left(\frac{24.0}{12.0}\right) = -26.71 \times \ln(2) \approx -18.51\text{ mV}.

02

For the bicarbonate ion in the previous exercise, the neuron's membrane potential is Vm=−70.0 mVV_m = -70.0\text{ mV}. Calculate the electrical driving force (Vm−EHCO3)(V_m - E_{\text{HCO}_3}) and the total electrochemical free energy change ΔGin\Delta G_{\text{in}} (in kJ/mol\text{kJ/mol}) for moving HCO3−\text{HCO}_3^- into the cell (F=96485 C/molF = 96485\text{ C/mol}).

Answer

(Vm−EHCO3)=−51.5 mV(V_m - E_{\text{HCO}_3}) = -51.5\text{ mV}; ΔGin=+4.97 kJ/mol\Delta G_{\text{in}} = +4.97\text{ kJ/mol}. Key steps: driving force is −70.0 mV−(−18.5 mV)=−51.5 mV=−0.0515 V-70.0\text{ mV} - (-18.5\text{ mV}) = -51.5\text{ mV} = -0.0515\text{ V}. Then ΔGin=zF(Vm−E)=(−1)(96485)(−0.0515)≈+4969 J/mol≈+4.97 kJ/mol\Delta G_{\text{in}} = zF(V_m - E) = (-1)(96485)(-0.0515) \approx +4969\text{ J/mol} \approx +4.97\text{ kJ/mol}.

03

An astrocyte has [Cl−]in=30.0 mM[\text{Cl}^-]_{\text{in}} = 30.0\text{ mM} and [Cl−]out=120.0 mM[\text{Cl}^-]_{\text{out}} = 120.0\text{ mM} at 310 K310\text{ K} (thermal voltage 26.71 mV26.71\text{ mV}). (a) Find EClE_{\text{Cl}}. (b) If Vm=−80.0 mVV_m = -80.0\text{ mV}, determine whether passive opening of chloride channels causes net Cl−\text{Cl}^- influx or efflux.

Answer

(a) ECl=−37.0 mVE_{\text{Cl}} = -37.0\text{ mV}; (b) Net efflux (exit from cell). Key steps: (a) ECl=26.71−1ln⁡(4)≈−37.03 mVE_{\text{Cl}} = \frac{26.71}{-1} \ln(4) \approx -37.03\text{ mV}. (b) Since Vm=−80.0 mVV_m = -80.0\text{ mV} is more negative than ECl=−37.0 mVE_{\text{Cl}} = -37.0\text{ mV}, the electrical repulsion of negative charge outward exceeds the inward chemical drive, yielding ΔGin=(−1)F(−0.080−(−0.037))>0\Delta G_{\text{in}} = (-1)F(-0.080 - (-0.037)) > 0. Net passive flow is outward.

Loading workspace…