Resources

A student dissolves 0.150 mol0.150\text{ mol} of crystalline calcium chloride (CaCl2\text{CaCl}_2) into 450.0 g450.0\text{ g} of pure liquid water inside an insulated constant-pressure calorimeter. The dissolution reaction is CaCl2(s)→Ca2+(aq)+2Cl−(aq)\text{CaCl}_2(s) \rightarrow \text{Ca}^{2+}(aq) + 2\text{Cl}^-(aq), which has an enthalpy of solution ΔHsoln=−81.5 kJ/mol\Delta H_{\text{soln}} = -81.5\text{ kJ/mol}. Assume the specific heat capacity of the resulting aqueous solution is equal to that of pure water (c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})), the combined mass of the final solution is mtotal=450.0 g+(0.150 mol×110.98 g/mol)=466.6 gm_{\text{total}} = 450.0\text{ g} + (0.150\text{ mol} \times 110.98\text{ g/mol}) = 466.6\text{ g}, and heat loss to the surroundings is negligible. (a) Calculate the total thermal energy qrxnq_{\text{rxn}} released by the dissolution and the resulting temperature change (ΔT\Delta T) of the solution. (b) Couple thermodynamic enthalpy with molecular hydration: explain why the hydration enthalpy (ΔHhyd\Delta H_{\text{hyd}}) of divalent Ca2+\text{Ca}^{2+} is substantially more exothermic than that of monovalent K+\text{K}^+, referencing Coulomb's Law and ion charge density.

Answer and steps

Final answer

(a) qrxn=−(0.150 mol)(−81.5 kJ/mol)=+12.225 kJ=+12225 Jq_{\text{rxn}} = -(0.150\text{ mol})(-81.5\text{ kJ/mol}) = +12.225\text{ kJ} = +12225\text{ J}; ΔT=qsolutionmtotalc=12225 J(466.6 g)(4.184 J/(g⋅∘C))=+6.26∘C\Delta T = \frac{q_{\text{solution}}}{m_{\text{total}} c} = \frac{12225\text{ J}}{(466.6\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))} = +6.26^\circ\text{C}. (b) By Coulomb's Law (F∝q1q2r2F \propto \frac{q_1 q_2}{r^2}), the divalent charge (+2+2) and smaller ionic radius of Ca2+\text{Ca}^{2+} yield a much higher charge density than K+\text{K}^+ (+1+1), generating significantly stronger ion-dipole attractions with water's partially negative oxygen atoms and releasing far greater hydration energy.

Steps

Part (a): Calculating Heat Released and Temperature Change

  1. Calculate the heat released by the reaction (qrxnq_{\text{rxn}}): The molar enthalpy of solution for calcium chloride is ΔHsoln=−81.5 kJ/mol\Delta H_{\text{soln}} = -81.5\text{ kJ/mol}. For n=0.150 moln = 0.150\text{ mol} of CaClX2\ce{CaCl2}, the change in enthalpy of the system is: ΔH=n⋅ΔHsoln=(0.150 mol)(−81.5 kJ/mol)=−12.225 kJ\Delta H = n \cdot \Delta H_{\text{soln}} = (0.150\text{ mol})(-81.5\text{ kJ/mol}) = -12.225\text{ kJ} Because the dissolution is exothermic, energy is released from the solute into the aqueous solution. The heat gained by the solution (qsolnq_{\text{soln}}) is equal in magnitude and opposite in sign to the system's reaction heat: qsoln=−qrxn=+12.225 kJ=+12225 Jq_{\text{soln}} = -q_{\text{rxn}} = +12.225\text{ kJ} = +12225\text{ J}
  2. Calculate the temperature change (ΔT\Delta T): Using the calorimetry relation for the solution: qsoln=mtotal⋅c⋅ΔTq_{\text{soln}} = m_{\text{total}} \cdot c \cdot \Delta T Rearranging to solve for ΔT\Delta T: ΔT=qsolnmtotal⋅c\Delta T = \frac{q_{\text{soln}}}{m_{\text{total}} \cdot c} Substitute the given values (mtotal=466.6 gm_{\text{total}} = 466.6\text{ g} and c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})): ΔT=12225 J(466.6 g)(4.184 J/(g⋅∘C))=122251952.25≈+6.26∘C\Delta T = \frac{12225\text{ J}}{(466.6\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))} = \frac{12225}{1952.25} \approx +6.26^\circ\text{C}

Common Pitfall: Watch the signs when applying q=mcΔTq = mc\Delta T. An exothermic reaction (ΔH<0\Delta H < 0) transfers heat to the solvent, making qsoln>0q_{\text{soln}} > 0 and resulting in a temperature increase (ΔT>0\Delta T > 0).


Part (b): Molecular Hydration and Coulomb's Law

  1. Electrostatic Basis (Coulomb's Law): The electrostatic force of attraction between two charges is described by Coulomb's Law: F∝∣q1q2∣r2F \propto \frac{|q_1 q_2|}{r^2} where q1q_1 is the charge of the ion, q2q_2 is the partial negative charge (δ−\delta^-) on the oxygen atom of a polar water molecule, and rr is the internuclear distance between the ion and the dipole center.
  2. Charge and Radius Comparison:

    • Both CaX2+\ce{Ca^{2+}} and KX+\ce{K+} are isoelectronic (each having 1818 electrons), but CaX2+\ce{Ca^{2+}} has 20 protons compared to 19 protons in KX+\ce{K+}.
    • The greater nuclear charge of CaX2+\ce{Ca^{2+}} draws its electron cloud inward, giving CaX2+\ce{Ca^{2+}} a smaller ionic radius (∼100 pm\sim 100\text{ pm}) than KX+\ce{K+} (∼138 pm\sim 138\text{ pm}).
  3. Charge Density and Hydration Enthalpy:

    • Ion Charge Density: Charge density is defined as the ratio of an ion's charge to its volume (charge density∝zr3\text{charge density} \propto \frac{z}{r^3}). Because CaX2+\ce{Ca^{2+}} possesses twice the net charge (+2+2 vs. +1+1) concentrated in a smaller ionic volume, it has a vastly higher charge density than KX+\ce{K+}.
    • Ion-Dipole Attractions: The high charge density creates a much stronger electric field, forming significantly stronger ion-dipole attractions with the oxygen atoms (δ−\delta^-) of surrounding water molecules in the primary hydration shell.
    • Enthalpy Impact: Stronger electrostatic bonds release more potential energy when formed; hence, the hydration enthalpy (ΔHhyd\Delta H_{\text{hyd}}) of CaX2+\ce{Ca^{2+}} is substantially more negative (more exothermic) than that of KX+\ce{K+}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses only the mass of water (450.0 g) instead of the total solution mass (466.6 g) when calculating ΔT.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    qrxn=0.150 mol×(−81.5 kJ/mol)=−12.225 kJ  ⟹  qsoln=+12225 Jq_{\text{rxn}} = 0.150\text{ mol} \times (-81.5\text{ kJ/mol}) = -12.225\text{ kJ} \implies q_{\text{soln}} = +12225\text{ J}

  2. Step 2

    ΔT=qsolnmwater×c=12225 J450.0 g×4.184 J/(g⋅∘C)=+6.49∘C\Delta T = \frac{q_{\text{soln}}}{m_{\text{water}} \times c} = \frac{12225\text{ J}}{450.0\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})} = +6.49^\circ\text{C}

    Correct

    ΔT=qsolnmtotal×c=12225 J466.6 g×4.184 J/(g⋅∘C)≈+6.26∘C\Delta T = \frac{q_{\text{soln}}}{m_{\text{total}} \times c} = \frac{12225\text{ J}}{466.6\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})} \approx +6.26^\circ\text{C}

    In solution calorimetry, the heat released warms the entire aqueous solution (solute plus solvent). You substituted only the solvent mass (450.0 g450.0\text{ g}) instead of the total solution mass (466.6 g466.6\text{ g}), which overestimated ΔT\Delta T.

  3. Step 3

    According to Coulomb's Law, attractive force is proportional to (q1×q2)/r2(q_1 \times q_2) / r^2. Ca2+\text{Ca}^{2+} has a +2+2 charge and smaller ionic radius than K+\text{K}^+, giving it a much higher charge density. Higher charge density leads to stronger ion-dipole attractions with water dipoles, releasing more energy and making ΔHhyd\Delta H_{\text{hyd}} more exothermic.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total heat transferred using molar enthalpy and mole quantity.

You handled the thermodynamic signs accurately by setting qsoln=−qrxnq_{\text{soln}} = -q_{\text{rxn}}.

You provided an excellent molecular explanation linking Coulomb's Law, ionic charge density, and hydration enthalpy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of solute mass in solution calorimetry

You substituted the mass of pure water (450.0 g450.0\text{ g}) instead of the combined solution mass (466.6 g466.6\text{ g}) in q=mcΔTq = mc\Delta T.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the initial mass of the solvent (msolventm_{\text{solvent}}) with the total mass of the heated thermal reservoir (msolution=msolute+msolventm_{\text{solution}} = m_{\text{solute}} + m_{\text{solvent}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Thermal Mass Reservoir
  • In aqueous calorimetry where a solid solute dissolves, the final solution consists of both the solute and the solvent: mtotal=msolute+msolventm_{\text{total}} = m_{\text{solute}} + m_{\text{solvent}}.

  • Always verify whether the problem provides or asks for total solution mass before evaluating q=mcΔTq = mc\Delta T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the total mass being heated: mtotal=450.0 g+(0.150 mol×110.98 g/mol)=466.6 gm_{\text{total}} = 450.0\text{ g} + (0.150\text{ mol} \times 110.98\text{ g/mol}) = 466.6\text{ g}.

  2. Apply the calorimetry equation: ΔT=qsolnmtotal⋅c=12225 J(466.6 g)(4.184 J/(g⋅∘C))\Delta T = \frac{q_{\text{soln}}}{m_{\text{total}} \cdot c} = \frac{12225\text{ J}}{(466.6\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))}.

  3. Compute the final temperature change: ΔT=122251952.25≈+6.26∘C\Delta T = \frac{12225}{1952.25} \approx +6.26^\circ\text{C}.

Final answer

(a) qrxn=−12.2 kJq_{\text{rxn}} = -12.2\text{ kJ} (12.2 kJ12.2\text{ kJ} released), ΔT=+6.26∘C\Delta T = +6.26^\circ\text{C}; (b) Ca2+\text{Ca}^{2+} has higher charge density and smaller radius than K+\text{K}^+, resulting in stronger ion-dipole attractions and a more exothermic ΔHhyd\Delta H_{\text{hyd}}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review whether a calorimeter experiment specifies msolutionm_{\text{solution}} or assumes the solute mass is negligible.

  • Practice two-component calorimetry problems where the dissolved solute contributes significantly to the total mass.

OverviewACEpath Teacher's Diagnosis

02 The student neglects the negative sign in q_soln = -q_rxn, yielding a negative temperature change for an exothermic dissolution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    qrxn=0.150 mol×(−81.5 kJ/mol)=−12.225 kJq_{\text{rxn}} = 0.150\text{ mol} \times (-81.5\text{ kJ/mol}) = -12.225\text{ kJ}

  2. Step 2

    qsoln=qrxn=−12225 Jq_{\text{soln}} = q_{\text{rxn}} = -12225\text{ J}

    Correct

    qsoln=−qrxn=−(−12225 J)=+12225 Jq_{\text{soln}} = -q_{\text{rxn}} = -(-12225\text{ J}) = +12225\text{ J}

    By conservation of energy in an insulated calorimeter, the heat gained by the solution must equal the heat lost by the reaction (qsoln=−qrxnq_{\text{soln}} = -q_{\text{rxn}}). Because heat was released by the dissolution, the solution absorbs that energy, so qsolnq_{\text{soln}} must be positive.

  3. Step 3

    ΔT=−12225 J466.6 g×4.184 J/(g⋅∘C)=−6.26∘C\Delta T = \frac{-12225\text{ J}}{466.6\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})} = -6.26^\circ\text{C}

    Correct

    ΔT=qsolnmtotalc=+12225 J(466.6 g)(4.184 J/(g⋅∘C))=+6.26∘C\Delta T = \frac{q_{\text{soln}}}{m_{\text{total}} c} = \frac{+12225\text{ J}}{(466.6\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))} = +6.26^\circ\text{C}

    Your algebraic setup and arithmetic were correct, but propagating the negative sign from the previous step produced a temperature drop instead of a temperature rise.

  4. Step 4

    By Coulomb's Law, electrostatic attraction is proportional to charge and inversely proportional to the square of distance. CaX2+\ce{Ca^{2+}} has twice the charge (+2+2 vs +1+1) and a smaller ionic radius than KX+\ce{K+}, resulting in a higher charge density. Stronger ion-dipole interactions with polar water molecules release greater hydration enthalpy, so ΔHhyd\Delta H_{\text{hyd}} is more exothermic.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the heat of reaction by multiplying moles by the molar enthalpy of solution.

You accurately converted kilojoules to joules for calorimetry calculations.

You demonstrated a complete conceptual grasp of Coulomb's Law, ionic radius, charge density, and ion-dipole interactions in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calorimetry sign convention error

You set qsoln=qrxnq_{\text{soln}} = q_{\text{rxn}} instead of applying the sign inversion qsoln=−qrxnq_{\text{soln}} = -q_{\text{rxn}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing system and surroundings sign conventions in calorimetry: an exothermic process releases thermal energy (DeltaH<0\\Delta H < 0), which enters the aqueous surroundings and raises its thermal energy (qsoln>0q_{\text{soln}} > 0), resulting in DeltaT>0\\Delta T > 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
First Law Calorimeter Balance
  • For an insulated calorimeter, qsystem+qsurroundings=0  ⟹  qsoln=−qrxnq_{\text{system}} + q_{\text{surroundings}} = 0 \implies q_{\text{soln}} = -q_{\text{rxn}}.

  • Always insert a negative sign when relating the heat absorbed by the solution to the enthalpy change of the chemical reaction.

Physical Reality Check
  • Exothermic dissolution (DeltaH<0\\Delta H < 0) releases heat into the water, warming it up (ΔT>0\Delta T > 0).

  • Check the sign of ΔT\Delta T: if a reaction is exothermic, verify that your computed ΔT\Delta T is positive.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the calorimeter heat balance: qsoln=−qrxn=−(−12225 J)=+12225 Jq_{\text{soln}} = -q_{\text{rxn}} = -(-12225\text{ J}) = +12225\text{ J}.

  2. Solve for the temperature change: ΔT=qsolnmtotalc=+12225 J(466.6 g)(4.184 J/(g⋅∘C))=+6.26∘C\Delta T = \frac{q_{\text{soln}}}{m_{\text{total}} c} = \frac{+12225\text{ J}}{(466.6\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))} = +6.26^\circ\text{C}.

Final answer

(a) qrxn=−12.225 kJq_{\text{rxn}} = -12.225\text{ kJ} (or 12.225 kJ12.225\text{ kJ} released), ΔT=+6.26∘C\Delta T = +6.26^\circ\text{C}; (b) CaX2+\ce{Ca^{2+}} has double the ionic charge and a smaller radius than KX+\ce{K+}, giving it a significantly higher charge density that exerts stronger Coulombic ion-dipole attractions on water molecules and releases substantially more hydration energy.

NEXT STEPS
Final Takeaways from Your Teacher
  • In calorimetry problems, write out the explicit boundary equation qsoln=−qrxnq_{\text{soln}} = -q_{\text{rxn}} before substituting values.

  • Perform a sanity check on the sign of ΔT\Delta T: exothermic reactions must always produce ΔT>0\Delta T > 0.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the difference in hydration enthalpy solely to ionic radius, claiming K⁺ has weaker hydration because it has a smaller charge density due to larger mass rather than comparing ionic charge.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    qrxn=0.150 mol×(−81.5 kJ/mol)=−12.225 kJ  ⟹  qsoln=−qrxn=+12225 J  ⟹  ΔT=12225 J466.6 g×4.184 J/(g⋅∘C)=+6.26∘Cq_{\text{rxn}} = 0.150\text{ mol} \times (-81.5\text{ kJ/mol}) = -12.225\text{ kJ} \implies q_{\text{soln}} = -q_{\text{rxn}} = +12225\text{ J} \implies \Delta T = \frac{12225\text{ J}}{466.6\text{ g} \times 4.184\text{ J}/(\text{g}\cdot^\circ\text{C})} = +6.26^\circ\text{C}

  2. Step 2

    By Coulomb's Law, attraction decreases with greater distance rr between charges. Both ions interact with water, but K+\text{K}^+ is heavier and has a larger atomic radius than Ca2+\text{Ca}^{2+}. Because K+\text{K}^+ is larger, water molecules cannot approach as closely, so weaker ion-dipole attraction makes ΔHhyd\Delta H_{\text{hyd}} less exothermic.

    Correct

    By Coulomb's Law (F∝∣q1q2∣r2F \propto \frac{|q_1 q_2|}{r^2}), electrostatic attraction depends on both charge and distance. Isoelectronic Ca2+\text{Ca}^{2+} has double the positive charge (+2+2 vs. +1+1) and a smaller ionic radius than K+\text{K}^+, resulting in a vastly higher charge density (charge/volume\text{charge}/\text{volume}). This exerts a much stronger electric field, forming stronger ion-dipole attractions with the partial negative oxygen atoms (δ−\delta^-) of water and releasing significantly more hydration enthalpy.

    You recognized that Ca2+\text{Ca}^{2+} has a smaller radius than K+\text{K}^+, but you omitted the central factor: ion charge (+2+2 for Ca2+\text{Ca}^{2+} versus +1+1 for K+\text{K}^+). Atomic mass does not govern electrostatic ion-dipole interactions, and charge density must incorporate both net charge and ionic size.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the reaction enthalpy release and the resulting positive temperature change in part (a).

You correctly identified that Coulombic attraction weakens as the distance rr between charges increases.

You correctly recognized that Ca2+\text{Ca}^{2+} has a smaller ionic radius than K+\text{K}^+.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of ion charge and charge density

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You focused solely on ionic size (and brought up irrelevant atomic mass) rather than analyzing both the charge numerator (q1q_1) and distance denominator (r2r^2) in Coulomb's Law to explain charge density.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate Both Variables in Coulomb's Law
  • Coulombic force is F∝∣q1q2∣r2F \propto \frac{|q_1 q_2|}{r^2}, meaning electrostatic strength depends directly on ion charge as well as inversely on distance.

  • Always compare the ionic charge (zz) first before comparing ionic radii (rr).

Define Charge Density Conceptually
  • Charge density reflects how concentrated an electric charge is per unit volume (roughly proportional to zr3\frac{z}{r^3} or zr\frac{z}{r}).

  • State explicitly how higher charge coupled with a smaller radius yields a much higher charge density, strengthening ion-dipole interactions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the charges of both ions: Ca2+\text{Ca}^{2+} has a +2+2 charge, whereas K+\text{K}^+ has a +1+1 charge.

  2. Compare their radii and electron configurations: both are isoelectronic with argon (18 e−18\text{ e}^-), but Ca2+\text{Ca}^{2+} has 2020 protons versus 1919 in K+\text{K}^+, pulling its electron cloud tighter and yielding a smaller radius.

  3. Combine charge and size into charge density: Ca2+\text{Ca}^{2+} concentrates twice the charge in a smaller ionic volume.

  4. Apply Coulomb's Law (F∝q1q2r2F \propto \frac{q_1 q_2}{r^2}): the +2+2 charge and smaller separation distance produce vastly stronger ion-dipole attractions with water's δ−\delta^- oxygen atoms, releasing far more hydration enthalpy (more negative ΔHhyd\Delta H_{\text{hyd}}).

Final answer

(a) qrxn=−12.225 kJq_{\text{rxn}} = -12.225\text{ kJ} (12.225 kJ12.225\text{ kJ} released), ΔT=+6.26∘C\Delta T = +6.26^\circ\text{C}; (b) By Coulomb's Law (F∝∣q1q2∣r2F \propto \frac{|q_1 q_2|}{r^2}), the +2+2 charge and smaller radius of Ca2+\text{Ca}^{2+} give it a much higher charge density than monovalent K+\text{K}^+, yielding significantly stronger ion-dipole attractions with water and a much more exothermic ΔHhyd\Delta H_{\text{hyd}}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Coulomb's Law applies to ion-dipole attractions by always stating both charge magnitudes and distance.

  • Practice defining charge density as the ratio of ionic charge to volume, avoiding mass comparisons in electrostatic problems.

Lock it in

Similar question

01

A mass of 8.00 g8.00\text{ g} of ammonium nitrate (NH4NO3\text{NH}_4\text{NO}_3, molar mass 80.05 g/mol80.05\text{ g/mol}) is dissolved in 92.00 g92.00\text{ g} of water in an insulated cup calorimeter. The dissolution process absorbs 2.57 kJ2.57\text{ kJ} of heat from the solution (qsoln=−2570 Jq_{\text{soln}} = -2570\text{ J}). Assuming c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^\circ\text{C}), calculate the temperature change ΔT\Delta T of the solution.

Answer

ΔT=−6.14∘C\Delta T = -6.14^\circ\text{C}. Key steps: Total mass is mtotal=8.00 g+92.00 g=100.00 gm_{\text{total}} = 8.00\text{ g} + 92.00\text{ g} = 100.00\text{ g}. Then ΔT=qsolnmtotalc=−2570 J(100.00 g)(4.184 J/(g⋅∘C))≈−6.14∘C\Delta T = \frac{q_{\text{soln}}}{m_{\text{total}} c} = \frac{-2570\text{ J}}{(100.00\text{ g})(4.184\text{ J}/(\text{g}\cdot^\circ\text{C}))} \approx -6.14^\circ\text{C}.

02

An experiment dissolves 0.200 mol0.200\text{ mol} of lithium chloride (LiCl\text{LiCl}, molar mass 42.39 g/mol42.39\text{ g/mol}) with ΔHsoln=−37.0 kJ/mol\Delta H_{\text{soln}} = -37.0\text{ kJ/mol} into 250.0 g250.0\text{ g} of water. Taking c=4.184 J/(g⋅∘C)c = 4.184\text{ J}/(\text{g}\cdot^\circ\text{C}), compute ΔT\Delta T both with and without accounting for the mass of dissolved LiCl\text{LiCl}, and state the percentage discrepancy caused by ignoring solute mass.

Answer

With solute mass: ΔT=+6.84∘C\Delta T = +6.84^\circ\text{C}; without solute mass: ΔT=+7.07∘C\Delta T = +7.07^\circ\text{C}; discrepancy ≈+3.4%\approx +3.4\%. Key steps: qsoln=−(0.200)(−37.0 kJ)=+7400 Jq_{\text{soln}} = -(0.200)(-37.0\text{ kJ}) = +7400\text{ J}. Solute mass =0.200×42.39=8.48 g= 0.200 \times 42.39 = 8.48\text{ g}, so mtotal=258.48 gm_{\text{total}} = 258.48\text{ g}. ΔTcorrect=7400258.48×4.184=6.84∘C\Delta T_{\text{correct}} = \frac{7400}{258.48 \times 4.184} = 6.84^\circ\text{C}. Ignoring solute mass gives ΔT=7400250.0×4.184=7.07∘C\Delta T = \frac{7400}{250.0 \times 4.184} = 7.07^\circ\text{C}.

03

Magnesium ion (Mg2+\text{Mg}^{2+}, ionic radius ≈72 pm\approx 72\text{ pm}) and sodium ion (Na+\text{Na}^+, ionic radius ≈102 pm\approx 102\text{ pm}) are both hydrated in aqueous solution. Predict which ion has a more exothermic hydration enthalpy (ΔHhyd\Delta H_{\text{hyd}}), and justify your answer quantitatively using the proportional relationship between electrostatic potential energy, ionic charge zz, and ionic radius rr.

Answer

Mg2+\text{Mg}^{2+} has a much more exothermic hydration enthalpy. Key steps: By Coulomb's Law, the electrostatic attraction between an ion and water's dipole is proportional to zr\frac{z}{r}. For Mg2+\text{Mg}^{2+}, zr∝+272 pm≈0.028 pm−1\frac{z}{r} \propto \frac{+2}{72\text{ pm}} \approx 0.028\text{ pm}^{-1}, whereas for Na+\text{Na}^+, zr∝+1102 pm≈0.0098 pm−1\frac{z}{r} \propto \frac{+1}{102\text{ pm}} \approx 0.0098\text{ pm}^{-1}. The charge density of Mg2+\text{Mg}^{2+} is nearly three times higher, creating much stronger ion-dipole attractions and releasing significantly more energy upon hydration.

Loading workspace…