Resources

A suspension of cultured human lymphoid cells is grown at a constant density of 1.50×106 cells/mL1.50 \times 10^6\text{ cells/mL} in a total culture volume of 250 mL250\text{ mL}. The cell cycle duration is 20.0 hours20.0\text{ hours}, with an S\text{S} phase lasting 7.50 hours7.50\text{ hours}. During S\text{S} phase, genomic DNA is replicated from 6.00 pg/cell6.00\text{ pg/cell} (2C2C) to 12.00 pg/cell12.00\text{ pg/cell} (4C4C). Assuming synchronous DNA synthesis rates among S\text{S}-phase cells and that the fraction of cells in S\text{S} phase corresponds to tST\frac{t_{\text{S}}}{T}: (a) calculate the total mass of newly synthesized DNA produced by the entire culture over a 1.00 hour1.00\text{ hour} incubation window (express in milligrams, mg\text{mg}), and (b) calculate the average rate of DNA synthesis per individual S\text{S}-phase cell in femtograms per minute (fg/min\text{fg/min}).

Answer and steps

Final answer

(a) Total mass synthesized =0.113 mg= 0.113\text{ mg} (or 1.13×10−1 mg1.13 \times 10^{-1}\text{ mg}); (b) Average rate of DNA synthesis per S\text{S}-phase cell =13.3 fg/min= 13.3\text{ fg/min}.

Steps

01

Find the total number of cells in the culture

The total cell count NN is the product of the culture volume and the cell density:

N=(250 mL)⋅(1.50×106 cells/mL)=3.75×108 cellsN = (250\text{ mL}) \cdot (1.50 \times 10^6\text{ cells/mL}) = 3.75 \times 10^8\text{ cells}


02

Determine the number of cells actively replicating DNA (S\text{S} phase)

The fraction of cells residing in S\text{S} phase in an asynchronous culture is proportional to the duration of S\text{S} phase relative to the total cell cycle duration TT:

Fraction in S phase=tST=7.50 h20.0 h=0.375\text{Fraction in S phase} = \frac{t_{\text{S}}}{T} = \frac{7.50\text{ h}}{20.0\text{ h}} = 0.375

Multiplying by the total number of cells gives the number of active S\text{S}-phase cells, NSN_{\text{S}}:

NS=0.375⋅(3.75×108 cells)=1.40625×108 cellsN_{\text{S}} = 0.375 \cdot (3.75 \times 10^8\text{ cells}) = 1.40625 \times 10^8\text{ cells}


03

Calculate the DNA synthesis rate per individual S\text{S}-phase cell (Part b)

During the S\text{S} phase, genomic DNA doubles from 2C2C (6.00 pg6.00\text{ pg}) to 4C4C (12.00 pg12.00\text{ pg}), corresponding to an increase of:

Δmcell=12.00 pg−6.00 pg=6.00 pg\Delta m_{\text{cell}} = 12.00\text{ pg} - 6.00\text{ pg} = 6.00\text{ pg}

Because synthesis is uniform over tS=7.50 ht_{\text{S}} = 7.50\text{ h}, the hourly rate per cell is:

rcell=6.00 pg7.50 h=0.800 pg/hr_{\text{cell}} = \frac{6.00\text{ pg}}{7.50\text{ h}} = 0.800\text{ pg/h}

Convert this rate into femtograms per minute (fg/min\text{fg/min}), noting that 1 pg=103 fg1\text{ pg} = 10^3\text{ fg} and 1 h=60 min1\text{ h} = 60\text{ min}:

rcell=0.800×103 fg60 min≈13.3 fg/minr_{\text{cell}} = \frac{0.800 \times 10^3\text{ fg}}{60\text{ min}} \approx 13.3\text{ fg/min}


04

Calculate the total DNA synthesized by the culture in 1.00 hour1.00\text{ hour} (Part a)

Every active S\text{S}-phase cell synthesizes DNA at the rate of 0.800 pg/h0.800\text{ pg/h}. Over an incubation window of Δt=1.00 h\Delta t = 1.00\text{ h}, the total mass of newly synthesized DNA MM across all NSN_{\text{S}} cells is:

M=NS⋅rcell⋅Δt=(1.40625×108 cells)⋅(0.800 pg/cell⋅h)⋅(1.00 h)=1.125×108 pgM = N_{\text{S}} \cdot r_{\text{cell}} \cdot \Delta t = (1.40625 \times 10^8\text{ cells}) \cdot (0.800\text{ pg/cell}\cdot\text{h}) \cdot (1.00\text{ h}) = 1.125 \times 10^8\text{ pg}

Convert picograms (pg\text{pg}) to milligrams (mg\text{mg}), where 1 mg=10−3 g=109 pg1\text{ mg} = 10^{-3}\text{ g} = 10^9\text{ pg}:

M=1.125×108 pg109 pg/mg=0.1125 mg≈0.113 mgM = \frac{1.125 \times 10^8\text{ pg}}{10^9\text{ pg/mg}} = 0.1125\text{ mg} \approx 0.113\text{ mg}

(Common pitfall: Ensure unit conversions between pg\text{pg}, fg\text{fg}, and mg\text{mg} are applied carefully, remembering that 1 mg=106 ng=109 pg=1012 fg1\text{ mg} = 10^6\text{ ng} = 10^9\text{ pg} = 10^{12}\text{ fg}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total cell content of 12.00 pg instead of the newly replicated mass of 6.00 pg when calculating the synthesis rate, doubling the calculated newly synthesized DNA.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total cells=1.50×106×250=3.75×108 cells\text{Total cells} = 1.50 \times 10^6 \times 250 = 3.75 \times 10^8\text{ cells}

  2. Step 2

    S-phase cells=3.75×108×(7.50/20.0)=1.40625×108 cells\text{S-phase cells} = 3.75 \times 10^8 \times (7.50/20.0) = 1.40625 \times 10^8\text{ cells}

  3. Step 3

    DNA synthesis per cell in 1 h=12.00 pg/7.50 h=1.60 pg/h\text{DNA synthesis per cell in 1 h} = 12.00\text{ pg} / 7.50\text{ h} = 1.60\text{ pg/h}

    Correct

    rcell=12.00 pg−6.00 pg7.50 h=6.00 pg7.50 h=0.800 pg/hr_{\text{cell}} = \frac{12.00\text{ pg} - 6.00\text{ pg}}{7.50\text{ h}} = \frac{6.00\text{ pg}}{7.50\text{ h}} = 0.800\text{ pg/h}

    You used the total DNA content at the end of S phase (12.00 pg12.00\text{ pg}) instead of the net amount of DNA newly synthesized during S phase (12.00 pg−6.00 pg=6.00 pg12.00\text{ pg} - 6.00\text{ pg} = 6.00\text{ pg}). This doubled the hourly synthesis rate per cell.

  4. Step 4

    Total DNA synthesized=1.40625×108×1.60 pg/h×1.00 h=2.25×108 pg  ⟹  Total mass=2.25×108 pg/109 pg/mg=0.225 mg\text{Total DNA synthesized} = 1.40625 \times 10^8 \times 1.60\text{ pg/h} \times 1.00\text{ h} = 2.25 \times 10^8\text{ pg} \implies \text{Total mass} = 2.25 \times 10^8\text{ pg} / 10^9\text{ pg/mg} = 0.225\text{ mg}

    Correct

    M=(1.40625×108 cells)⋅(0.800 pg/cell⋅h)⋅(1.00 h)=1.125×108 pg  ⟹  M=1.125×108 pg109 pg/mg≈0.113 mgM = (1.40625 \times 10^8\text{ cells}) \cdot (0.800\text{ pg/cell}\cdot\text{h}) \cdot (1.00\text{ h}) = 1.125 \times 10^8\text{ pg} \implies M = \frac{1.125 \times 10^8\text{ pg}}{10^9\text{ pg/mg}} \approx 0.113\text{ mg}

    Your unit conversion from picograms to milligrams was set up correctly, but the numerical answer carried forward the doubled rate from Step 3.

  5. Step 5

    DNA replicated per cell=6.00 pg=6000 fg  ⟹  S phase duration=7.50×60=450 min  ⟹  Rate=6000 fg/450 min=13.3 fg/min\text{DNA replicated per cell} = 6.00\text{ pg} = 6000\text{ fg} \implies \text{S phase duration} = 7.50 \times 60 = 450\text{ min} \implies \text{Rate} = 6000\text{ fg} / 450\text{ min} = 13.3\text{ fg/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total culture cell count and the population of cells in S phase.

You executed the unit conversions between hours, minutes, picograms, femtograms, and milligrams accurately.

You correctly solved part (b) using the net DNA replicated (6.00 pg6.00\text{ pg}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gross vs net quantity confusion

You accidentally used the total final genome mass (12.00 pg12.00\text{ pg}) instead of the newly synthesized mass (6.00 pg6.00\text{ pg}) when calculating the hourly rate in part (a), even though you correctly used 6.00 pg6.00\text{ pg} in part (b).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute post-replication DNA content (4C4C) with the net amount of DNA synthesized during replication (Δm=4C−2C\Delta m = 4C - 2C). Rate of synthesis depends strictly on the change in mass (Δm\Delta m), not the final mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Synthesis vs. Total Content
  • Newly synthesized DNA equals the change in DNA content: Δm=mfinal−minitial=4C−2C=2C\Delta m = m_{\text{final}} - m_{\text{initial}} = 4C - 2C = 2C.

  • Before calculating synthesis rate, always write Δm=m4C−m2C\Delta m = m_{4C} - m_{2C} to isolate only the new mass formed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the net mass of DNA synthesized per cell during S phase: Δmcell=12.00 pg−6.00 pg=6.00 pg\Delta m_{\text{cell}} = 12.00\text{ pg} - 6.00\text{ pg} = 6.00\text{ pg}.

  2. Compute the hourly synthesis rate per cell: rcell=6.00 pg7.50 h=0.800 pg/hr_{\text{cell}} = \frac{6.00\text{ pg}}{7.50\text{ h}} = 0.800\text{ pg/h}.

  3. Multiply by the number of S-phase cells and incubation time: M=(1.40625×108 cells)⋅(0.800 pg/h)⋅(1.00 h)=1.125×108 pgM = (1.40625 \times 10^8\text{ cells}) \cdot (0.800\text{ pg/h}) \cdot (1.00\text{ h}) = 1.125 \times 10^8\text{ pg}.

  4. Convert picograms to milligrams: M=1.125×108 pg109 pg/mg≈0.113 mgM = \frac{1.125 \times 10^8\text{ pg}}{10^9\text{ pg/mg}} \approx 0.113\text{ mg}.

Final answer

(a) 0.113 mg0.113\text{ mg}; (b) 13.3 fg/min13.3\text{ fg/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between total DNA content at G2G_2 (4C4C) and newly synthesized DNA during S phase (ΔC=2C\Delta C = 2C).

  • Practice checking consistency between related sub-questions: your rate per cell in part (a) was 1.60 pg/h=26.7 fg/min1.60\text{ pg/h} = 26.7\text{ fg/min}, which contradicted your correct part (b) rate of 13.3 fg/min13.3\text{ fg/min}.

OverviewACEpath Teacher's Diagnosis

02 The student assumes all cells in the culture actively synthesize DNA rather than only the fraction in S phase, overestimating the total DNA synthesized.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total cells=1.50×106×250=3.75×108 cells  ⟹  Synthesis rate per cell=6.00 pg/7.50 h=0.800 pg/h\text{Total cells} = 1.50 \times 10^6 \times 250 = 3.75 \times 10^8\text{ cells} \implies \text{Synthesis rate per cell} = 6.00\text{ pg} / 7.50\text{ h} = 0.800\text{ pg/h}

  2. Step 2

    Total DNA=3.75×108 cells×0.800 pg/h×1.00 h=3.00×108 pg\text{Total DNA} = 3.75 \times 10^8\text{ cells} \times 0.800\text{ pg/h} \times 1.00\text{ h} = 3.00 \times 10^8\text{ pg}

    Correct

    M=N⋅(tST)⋅rcell⋅Δt=(3.75×108)⋅(7.5020.0)⋅(0.800 pg/h)⋅(1.00 h)=1.125×108 pgM = N \cdot \left(\frac{t_{\text{S}}}{T}\right) \cdot r_{\text{cell}} \cdot \Delta t = (3.75 \times 10^8) \cdot \left(\frac{7.50}{20.0}\right) \cdot (0.800\text{ pg/h}) \cdot (1.00\text{ h}) = 1.125 \times 10^8\text{ pg}

    You multiplied the total cell count by the synthesis rate directly. In an asynchronous culture, only the fraction of cells currently in S\text{S} phase (tST=7.5020.0=0.375\frac{t_{\text{S}}}{T} = \frac{7.50}{20.0} = 0.375, or 1.40625×108 cells1.40625 \times 10^8\text{ cells}) replicate DNA at any given moment.

  3. Step 3

    Total mass=3.00×108 pg/109 pg/mg=0.300 mg\text{Total mass} = 3.00 \times 10^8\text{ pg} / 10^9\text{ pg/mg} = 0.300\text{ mg}

    Correct

    M=1.125×108 pg109 pg/mg=0.1125 mg≈0.113 mgM = \frac{1.125 \times 10^8\text{ pg}}{10^9\text{ pg/mg}} = 0.1125\text{ mg} \approx 0.113\text{ mg}

    You applied the correct unit conversion factor (109 pg=1 mg10^9\text{ pg} = 1\text{ mg}), but your result inherits the unscaled cell population from the previous step.

  4. Step 4

    DNA replicated=12.00−6.00=6.00 pg  ⟹  6.00 pg=6000 fg  ⟹  Time=7.50×60=450 min  ⟹  Rate=6000 fg/450 min=13.3 fg/min\text{DNA replicated} = 12.00 - 6.00 = 6.00\text{ pg} \implies 6.00\text{ pg} = 6000\text{ fg} \implies \text{Time} = 7.50 \times 60 = 450\text{ min} \implies \text{Rate} = 6000\text{ fg} / 450\text{ min} = 13.3\text{ fg/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total cell population in the suspension culture.

You accurately computed the net DNA mass duplicated during S phase (6.00 pg6.00\text{ pg}).

You carried out unit conversions between picograms and femtograms, and hours and minutes, yielding the exact answer for part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of cell-cycle phase fraction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the entire cell population as actively synthesizing DNA simultaneously, overlooking that only cells residing in the S phase (extfraction=tS/T ext{fraction} = t_{\text{S}} / T) are replicating their genomes in an asynchronous culture.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Active Replicating Subpopulations
  • In an asynchronous culture, DNA replication occurs exclusively during the S\text{S} phase, so the number of replicating cells is NS=Ntotal×tSTN_{\text{S}} = N_{\text{total}} \times \frac{t_{\text{S}}}{T}.

  • Before multiplying single-cell rates across a whole population, verify whether the biological process occurs across the entire cell cycle or only within a specific subphase.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the fraction of cells in S\text{S} phase: tST=7.50 h20.0 h=0.375\frac{t_{\text{S}}}{T} = \frac{7.50\text{ h}}{20.0\text{ h}} = 0.375.

  2. Find the number of actively synthesizing cells: NS=(3.75×108 cells)×0.375=1.40625×108 cellsN_{\text{S}} = (3.75 \times 10^8\text{ cells}) \times 0.375 = 1.40625 \times 10^8\text{ cells}.

  3. Compute the total DNA synthesized in 1.00 h1.00\text{ h}: M=(1.40625×108 cells)×(0.800 pg/cell)=1.125×108 pgM = (1.40625 \times 10^8\text{ cells}) \times (0.800\text{ pg/cell}) = 1.125 \times 10^8\text{ pg}.

  4. Convert picograms to milligrams: 1.125×108 pg109 pg/mg=0.1125 mg≈0.113 mg\frac{1.125 \times 10^8\text{ pg}}{10^9\text{ pg/mg}} = 0.1125\text{ mg} \approx 0.113\text{ mg}.

Final answer

(a) Total mass synthesized =0.113 mg= 0.113\text{ mg}; (b) Average rate of DNA synthesis per S\text{S}-phase cell =13.3 fg/min= 13.3\text{ fg/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether a physiological rate applies to all cells or strictly to a cell-cycle subpopulation (G1G_1, SS, G2G_2, or MM).

  • Label the cell count variable explicitly as NSN_{\text{S}} rather than general NN to remind yourself to apply the phase ratio.

OverviewACEpath Teacher's Diagnosis

03 The student uses the total cell cycle duration of 20.0 hours instead of the S phase duration of 7.50 hours to find the rate of DNA replication per S-phase cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total cells=1.50×106×250=3.75×108 cells  ⟹  Fraction in S=7.5020.0=0.375  ⟹  S-phase cells=3.75×108×0.375=1.40625×108 cells\text{Total cells} = 1.50 \times 10^6 \times 250 = 3.75 \times 10^8\text{ cells} \implies \text{Fraction in S} = \frac{7.50}{20.0} = 0.375 \implies \text{S-phase cells} = 3.75 \times 10^8 \times 0.375 = 1.40625 \times 10^8\text{ cells}

  2. Step 2

    Synthesis rate per cell=6.00 pg7.50 h=0.800 pg/h  ⟹  Total DNA in 1.00 h=1.40625×108×0.800=1.125×108 pg  ⟹  Total mass=0.1125 mg\text{Synthesis rate per cell} = \frac{6.00\text{ pg}}{7.50\text{ h}} = 0.800\text{ pg/h} \implies \text{Total DNA in } 1.00\text{ h} = 1.40625 \times 10^8 \times 0.800 = 1.125 \times 10^8\text{ pg} \implies \text{Total mass} = 0.1125\text{ mg}

  3. Step 3

    Replicated DNA=6.00 pg=6000 fg  ⟹  Total time in minutes=20.0×60=1200 min  ⟹  Rate=6000 fg1200 min=5.00 fg/min\text{Replicated DNA} = 6.00\text{ pg} = 6000\text{ fg} \implies \text{Total time in minutes} = 20.0 \times 60 = 1200\text{ min} \implies \text{Rate} = \frac{6000\text{ fg}}{1200\text{ min}} = 5.00\text{ fg/min}

    Correct

    rcell=6000 fg7.50×60 min=6000 fg450 min≈13.3 fg/minr_{\text{cell}} = \frac{6000\text{ fg}}{7.50 \times 60\text{ min}} = \frac{6000\text{ fg}}{450\text{ min}} \approx 13.3\text{ fg/min}

    You divided by the total cell cycle length (20.0 h=1200 min20.0\text{ h} = 1200\text{ min}) rather than the specific duration of the S\text{S} phase (7.50 h=450 min7.50\text{ h} = 450\text{ min}). DNA replication occurs exclusively during S\text{S} phase, not throughout the entire cell cycle.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total culture cell count and the active fraction of S\text{S}-phase cells.

You correctly found the hourly DNA synthesis rate and total mass synthesized for part (a).

You correctly converted picograms to femtograms (1 pg=1000 fg1\text{ pg} = 1000\text{ fg}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Phase Duration Misattribution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the total cell cycle duration (TT) with the specific sub-phase duration (tSt_{\text{S}}) when calculating the active replication rate of an individual S\text{S}-phase cell. Because DNA synthesis is restricted to S\text{S} phase, the active replication rate must be evaluated over tSt_{\text{S}} rather than the full generation time TT.

REASONING PATH
Your ACEpath teacher’s suggested approach
Restricted Active Phase
  • DNA replication occurs solely during S\text{S} phase; during G1\text{G}_1, G2\text{G}_2, and M\text{M} phases, the rate of genomic DNA replication is zero.

  • When computing the active rate of DNA synthesis for an S\text{S}-phase cell, always divide the replicated DNA mass by the duration of S\text{S} phase (tSt_{\text{S}}), not the total cell cycle time (TT).

Direct Unit Conversion
  • If you already have a rate in pg/h\text{pg/h}, convert units directly: 1 pg/h=1000 fg60 min=503 fg/min1\text{ pg/h} = \frac{1000\text{ fg}}{60\text{ min}} = \frac{50}{3}\text{ fg/min}.

  • Reuse your verified hourly rate (0.800 pg/h0.800\text{ pg/h}) and multiply by 1000 fg/pg60 min/h\frac{1000\text{ fg/pg}}{60\text{ min/h}} to avoid recalculating the time interval.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Note that DNA replication of 6.00 pg=6000 fg6.00\text{ pg} = 6000\text{ fg} occurs exclusively during the S\text{S} phase, which lasts 7.50 h7.50\text{ h}.

  2. Convert the S\text{S}-phase duration to minutes: tS=7.50 h×60 min/h=450 mint_{\text{S}} = 7.50\text{ h} \times 60\text{ min/h} = 450\text{ min}.

  3. Divide the synthesized mass by the S\text{S}-phase duration: r=6000 fg450 min=13.333... fg/min≈13.3 fg/minr = \frac{6000\text{ fg}}{450\text{ min}} = 13.333...\text{ fg/min} \approx 13.3\text{ fg/min}.

Final answer

(a) Total mass synthesized =0.113 mg= 0.113\text{ mg} (or 0.1125 mg0.1125\text{ mg}); (b) Average rate of DNA synthesis per S\text{S}-phase cell =13.3 fg/min= 13.3\text{ fg/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct phases of the eukaryotic cell cycle (G1\text{G}_1, S\text{S}, G2\text{G}_2, M\text{M}) to keep in mind which biochemical processes are confined to specific windows.

  • When calculating rates of phase-specific events (such as replication or chromosome condensation), always verify that the denominator is the duration of that specific phase rather than the entire generation time.

  • Practice direct dimensional analysis conversions from existing step solutions to avoid re-deriving terms with different assumptions.

Lock it in

Similar question

01

A cell culture has a cell cycle duration of 24.0 h24.0\text{ h} with an S phase of 6.0 h6.0\text{ h}. If the initial G1G_1 DNA content is 5.00 pg/cell5.00\text{ pg/cell} and doubles to 10.00 pg/cell10.00\text{ pg/cell} at the end of S phase, what is the rate of DNA synthesis per cell in picograms per hour (pg/h\text{pg/h})?

Answer

0.833 pg/h0.833\text{ pg/h}. Net DNA synthesized per cell is Δm=10.00 pg−5.00 pg=5.00 pg\Delta m = 10.00\text{ pg} - 5.00\text{ pg} = 5.00\text{ pg}. Rate = 5.00 pg6.0 h≈0.833 pg/h\frac{5.00\text{ pg}}{6.0\text{ h}} \approx 0.833\text{ pg/h}.

02

An asynchronous culture contains 2.00×1072.00 \times 10^7 cells. The cell cycle is 16.0 h16.0\text{ h}, and S phase lasts 4.00 h4.00\text{ h}. During S phase, each cell synthesizes 4.00 pg4.00\text{ pg} of DNA. Calculate the total mass of DNA synthesized by the entire culture during a 2.00 h2.00\text{ h} incubation (in micrograms, μg\mu\text{g}).

Answer

10.0 μg10.0\,\mu\text{g}. Number of S-phase cells is NS=2.00×107×4.0016.0=5.00×106N_{\text{S}} = 2.00 \times 10^7 \times \frac{4.00}{16.0} = 5.00 \times 10^6 cells. Synthesis rate per cell is 4.00 pg4.00 h=1.00 pg/h\frac{4.00\text{ pg}}{4.00\text{ h}} = 1.00\text{ pg/h}. Total synthesized in 2 h2\text{ h} is 5.00×106×1.00 pg/h×2.00 h=1.00×107 pg=10.0 μg5.00 \times 10^6 \times 1.00\text{ pg/h} \times 2.00\text{ h} = 1.00 \times 10^7\text{ pg} = 10.0\,\mu\text{g} (since 1 μg=106 pg1\,\mu\text{g} = 10^6\text{ pg}).

03

In a pulse-labeling experiment, 30%30\% of cells in a culture of 5.00×1085.00 \times 10^8 cells are in S phase. Individual cells incorporate dTTP\text{dTTP} into genomic DNA at a constant rate of 20.0 fg/min20.0\text{ fg/min}. What is the total mass of new genomic DNA produced by the entire culture over a 30.0 minute30.0\text{ minute} window, expressed in milligrams (mg\text{mg})?

Answer

0.090 mg0.090\text{ mg} (or 9.00×10−2 mg9.00 \times 10^{-2}\text{ mg}). Number of S-phase cells = 0.30×5.00×108=1.50×1080.30 \times 5.00 \times 10^8 = 1.50 \times 10^8 cells. Mass per cell in 30 min30\text{ min} = 20.0 fg/min×30.0 min=600 fg=6.00×10−10 mg20.0\text{ fg/min} \times 30.0\text{ min} = 600\text{ fg} = 6.00 \times 10^{-10}\text{ mg}. Total mass = (1.50×108)×(6.00×10−10 mg)=0.090 mg(1.50 \times 10^8) \times (6.00 \times 10^{-10}\text{ mg}) = 0.090\text{ mg}.

Loading workspace…