Resources

In facultative anaerobes such as Escherichia  coliEscherichia\;coli, electron transport chain complexes switch between oxygen (extO2 ext{O}_2) and alternative electron acceptors depending on environmental oxygen partial pressure. The critical dissolved oxygen threshold below which cytochrome bo3bo_3 ubiquinol oxidase is downregulated and anaerobic respiration/fermentation pathways are triggered is [O2]=2.40×10−6 M[\text{O}_2] = 2.40\times 10^{-6}\text{ M}. If an E.  coliE.\;coli suspension in an enclosed 2.50 L2.50\text{ L} chamber has an initial dissolved oxygen concentration of 2.20×10−4 M2.20\times 10^{-4}\text{ M} and a constant aerobic oxygen consumption rate of 1.45×10−5 mol⋅L−1⋅min−11.45\times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}, calculate: (a) the total moles of O2\text{O}_2 consumed when the culture reaches the critical anaerobic transition threshold, and (b) the exact time (in minutes, to three significant figures) elapsed until the threshold is crossed and anaerobic pathways must activate.

Answer and steps

Final answer

(a) 5.44×10−4 mol O25.44\times 10^{-4}\text{ mol O}_2, (b) 15.0 min15.0\text{ min}

Steps

Part (a): Total Moles of OX2\ce{O2} Consumed

  1. Find the change in dissolved oxygen concentration (Δ[OX2]\Delta [\ce{O2}]): Aerobic respiration depletes oxygen linearly from the initial concentration until it drops to the critical metabolic transition threshold: Δ[OX2]=[OX2]initial−[OX2]threshold\Delta [\ce{O2}] = [\ce{O2}]_{\text{initial}} - [\ce{O2}]_{\text{threshold}} Δ[OX2]=2.20×10−4 M−2.40×10−6 M\Delta [\ce{O2}] = 2.20 \times 10^{-4}\text{ M} - 2.40 \times 10^{-6}\text{ M} Express both terms using the same power of ten: Δ[OX2]=2.200×10−4 M−0.024×10−4 M=2.176×10−4 M\Delta [\ce{O2}] = 2.200 \times 10^{-4}\text{ M} - 0.024 \times 10^{-4}\text{ M} = 2.176 \times 10^{-4}\text{ M}
  2. Calculate the total moles consumed in the closed chamber: Multiply the concentration decrease by the total volume (V=2.50 LV = 2.50\text{ L}): nOX2 consumed=Δ[OX2]⋅Vn_{\ce{O2}\text{ consumed}} = \Delta [\ce{O2}] \cdot V nOX2 consumed=(2.176×10−4 mol⋅L−1)⋅(2.50 L)=5.44×10−4 moln_{\ce{O2}\text{ consumed}} = (2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}) \cdot (2.50\text{ L}) = 5.44 \times 10^{-4}\text{ mol}

Part (b): Time Elapsed Until Anaerobic Transition

  1. Relate consumption rate to elapsed time: Since the rate of oxygen consumption rr is constant: Rate (r)=Δ[OX2]Δt\text{Rate } (r) = \frac{\Delta [\ce{O2}]}{\Delta t} Rearranging for time elapsed (Δt\Delta t): Δt=Δ[OX2]r\Delta t = \frac{\Delta [\ce{O2}]}{r}
  2. Compute the elapsed time in minutes: Δt=2.176×10−4 mol⋅L−11.45×10−5 mol⋅L−1⋅min−1≈15.007 min\Delta t = \frac{2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}}{1.45 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}} \approx 15.007\text{ min} Rounding to three significant figures gives: Δt=15.0 min\Delta t = 15.0\text{ min}

Common Pitfall: Avoid calculating time by dividing total moles consumed by the volumetric rate (rr). Because rr is given in concentration per unit time (mol⋅L−1⋅min−1\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}), it must divide the change in concentration Δ[OX2]\Delta [\ce{O2}], not the total amount in moles. Alternatively, if working with moles, divide by the absolute rate R=r⋅V=3.625×10−5 mol⋅min−1R = r \cdot V = 3.625 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the concentration change by the chamber volume, mistaking molarity consumed for total moles consumed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[O2]=2.20×10−4 M−2.40×10−6 M  ⟹  =2.176×10−4 M\Delta [\text{O}_2] = 2.20 \times 10^{-4}\text{ M} - 2.40 \times 10^{-6}\text{ M} \implies = 2.176 \times 10^{-4}\text{ M}

  2. Step 2

    Moles consumed=2.18×10−4 mol\text{Moles consumed} = 2.18 \times 10^{-4}\text{ mol}

    Correct

    nO2=Δ[O2]⋅V=(2.176×10−4 mol⋅L−1)(2.50 L)=5.44×10−4 moln_{\text{O}_2} = \Delta [\text{O}_2] \cdot V = (2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1})(2.50\text{ L}) = 5.44 \times 10^{-4}\text{ mol}

    You treated the concentration change in molarity (mol⋅L−1\text{mol}\cdot\text{L}^{-1}) as the total mole quantity instead of multiplying by the chamber volume of 2.50 L2.50\text{ L}.

  3. Step 3

    t=2.176×10−4 M1.45×10−5 M/min  ⟹  t=15.0 mint = \frac{2.176 \times 10^{-4}\text{ M}}{1.45 \times 10^{-5}\text{ M/min}} \implies t = 15.0\text{ min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net drop in dissolved oxygen concentration.

You matched volumetric rate units with concentration units to solve for the correct elapsed time of 15.0 min15.0\text{ min}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing concentration with total amount

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the chamber volume conversion factor (n=C⋅Vn = C \cdot V), equating molarity (an intensive concentration value) directly to total substance quantity in moles (an extensive quantity).

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity vs. Moles
  • n=C×Vn = C \times V, where molarity CC is in mol⋅L−1\text{mol}\cdot\text{L}^{-1} and volume VV is in L\text{L}.

  • Always verify units: an answer in moles requires multiplying concentration in mol⋅L−1\text{mol}\cdot\text{L}^{-1} by total volume in L\text{L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the concentration change by the chamber volume: nO2=Δ[O2]×Vn_{\text{O}_2} = \Delta [\text{O}_2] \times V

  2. Substitute V=2.50 LV = 2.50\text{ L}: nO2=(2.176×10−4 mol⋅L−1)(2.50 L)n_{\text{O}_2} = (2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1})(2.50\text{ L})

  3. Compute the product: nO2=5.44×10−4 moln_{\text{O}_2} = 5.44 \times 10^{-4}\text{ mol}

Final answer

(a) 5.44×10−4 mol O25.44 \times 10^{-4}\text{ mol O}_2, (b) 15.0 min15.0\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check units before writing final values: verify that quantities labeled 'moles' do not carry concentration values.

  • Practice distinguishing intensive properties (concentration, rate per liter) from extensive properties (total moles, absolute rate) in reaction vessel problems.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the critical threshold concentration and assumes oxygen must be consumed completely to zero before anaerobic pathways activate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δ[O2]=2.20×10−4 M−0 M=2.20×10−4 M\Delta [\text{O}_2] = 2.20\times 10^{-4}\text{ M} - 0\text{ M} = 2.20\times 10^{-4}\text{ M}

    Correct

    Δ[O2]=[O2]initial−[O2]threshold=2.20×10−4 M−2.40×10−6 M=2.176×10−4 M\Delta [\text{O}_2] = [\text{O}_2]_{\text{initial}} - [\text{O}_2]_{\text{threshold}} = 2.20\times 10^{-4}\text{ M} - 2.40\times 10^{-6}\text{ M} = 2.176\times 10^{-4}\text{ M}

    Facultative anaerobes trigger anaerobic pathways as soon as dissolved oxygen drops to the critical threshold (2.40×10−6 M2.40\times 10^{-6}\text{ M}), not when oxygen is completely exhausted to zero.

  2. Step 2

    Moles consumed=(2.20×10−4 mol/L)×2.50 L=5.50×10−4 mol\text{Moles consumed} = (2.20\times 10^{-4}\text{ mol/L})\times 2.50\text{ L} = 5.50\times 10^{-4}\text{ mol}

    Correct

    nconsumed=Δ[O2]⋅V=(2.176×10−4 mol⋅L−1)⋅(2.50 L)=5.44×10−4 moln_{\text{consumed}} = \Delta [\text{O}_2]\cdot V = (2.176\times 10^{-4}\text{ mol}\cdot\text{L}^{-1})\cdot (2.50\text{ L}) = 5.44\times 10^{-4}\text{ mol}

    You multiplied your concentration change by the chamber volume correctly, but the numerical result is inaccurate due to the initial subtraction error.

  3. Step 3

    t=2.20×10−4 M1.45×10−5 M/min  ⟹  t=15.2 mint = \frac{2.20\times 10^{-4}\text{ M}}{1.45\times 10^{-5}\text{ M/min}} \implies t = 15.2\text{ min}

    Correct

    t=Δ[O2]r=2.176×10−4 M1.45×10−5 M⋅min−1≈15.0 mint = \frac{\Delta [\text{O}_2]}{r} = \frac{2.176\times 10^{-4}\text{ M}}{1.45\times 10^{-5}\text{ M}\cdot\text{min}^{-1}} \approx 15.0\text{ min}

    You correctly related the concentration change and the volumetric consumption rate to find elapsed time, but using the incorrect Δ[O2]\Delta [\text{O}_2] led to 15.2 min15.2\text{ min} instead of 15.0 min15.0\text{ min}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that total moles consumed equals Δ[O2]×V\Delta [\text{O}_2] \times V.

You matched units properly between volumetric consumption rate and concentration to solve for elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Non-Zero Threshold

You substituted 0 M0\text{ M} instead of the given threshold concentration of 2.40×10−6 M2.40\times 10^{-6}\text{ M} for the final oxygen level.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated 'transition to anaerobic pathways' as complete depletion of oxygen rather than reaching a specific critical sensor threshold concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Transition Conditions
  • Metabolic and physiological shifts occur at specific regulatory thresholds ([S]crit[\text{S}]_{\text{crit}}), not necessarily at zero concentration.

  • Always verify whether the problem specifies a non-zero threshold before setting final concentration to zero: Δ[O2]=[O2]initial−[O2]threshold\Delta [\text{O}_2] = [\text{O}_2]_{\text{initial}} - [\text{O}_2]_{\text{threshold}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δ[O2]=2.20×10−4 M−0.024×10−4 M=2.176×10−4 M\Delta [\text{O}_2] = 2.20\times 10^{-4}\text{ M} - 0.024\times 10^{-4}\text{ M} = 2.176\times 10^{-4}\text{ M}

  2. Moles consumed=(2.176×10−4 mol⋅L−1)×2.50 L=5.44×10−4 mol\text{Moles consumed} = (2.176\times 10^{-4}\text{ mol}\cdot\text{L}^{-1})\times 2.50\text{ L} = 5.44\times 10^{-4}\text{ mol}

  3. t=2.176×10−4 M1.45×10−5 M⋅min−1=15.007 min≈15.0 mint = \frac{2.176\times 10^{-4}\text{ M}}{1.45\times 10^{-5}\text{ M}\cdot\text{min}^{-1}} = 15.007\text{ min} \approx 15.0\text{ min}

Final answer

(a) 5.44×10−4 mol O25.44\times 10^{-4}\text{ mol O}_2, (b) 15.0 min15.0\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay special attention to regulatory thresholds given in metabolic switch questions.

  • Align scientific powers of ten (e.g., 10−410^{-4} vs. 10−610^{-6}) before subtracting values.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly calculates the elapsed time by dividing the total moles of oxygen by the volume-specific rate without adjusting for volume or using molarity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[OX2]=2.20×10−4 M−2.40×10−6 M=2.176×10−4 M\Delta [\ce{O2}] = 2.20 \times 10^{-4}\text{ M} - 2.40 \times 10^{-6}\text{ M} = 2.176 \times 10^{-4}\text{ M}

  2. Step 2

    Moles consumed=(2.176×10−4 mol/L)×2.50 L=5.44×10−4 mol\text{Moles consumed} = (2.176 \times 10^{-4}\text{ mol/L}) \times 2.50\text{ L} = 5.44 \times 10^{-4}\text{ mol}

  3. Step 3

    t=5.44×10−4 mol1.45×10−5 mol/(L⋅min)  ⟹  t=37.5 mint = \frac{5.44 \times 10^{-4}\text{ mol}}{1.45 \times 10^{-5}\text{ mol/(L}\cdot\text{min)}} \implies t = 37.5\text{ min}

    Correct

    t=Δ[OX2]r=2.176×10−4 mol⋅L−11.45×10−5 mol⋅L−1⋅min−1=15.0 mint = \frac{\Delta [\ce{O2}]}{r} = \frac{2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}}{1.45 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}} = 15.0\text{ min}

    You divided total moles by a volumetric rate given in mol⋅L−1⋅min−1\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}, which yields units of L⋅min\text{L}\cdot\text{min} rather than time. To find elapsed time, either divide the concentration change Δ[OX2]\Delta [\ce{O2}] by the volumetric rate rr, or divide the total moles by the whole-system rate R=r×VR = r \times V.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted concentrations into a common exponent to find Δ[OX2]\Delta [\ce{O2}].

You correctly used the liquid volume to calculate the total moles of OX2\ce{O2} consumed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Inconsistency in Reaction Kinetics

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated an intensive volumetric reaction rate (mol⋅L−1⋅min−1\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) with an extensive total reaction rate (mol⋅min−1\text{mol}\cdot\text{min}^{-1}), leading to a dimensional mismatch where liters failed to cancel out.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Intensive and Extensive Quantities
  • An intensive quantity (concentration, mol⋅L−1\text{mol}\cdot\text{L}^{-1}) pairs with a volumetric rate (mol⋅L−1⋅time−1\text{mol}\cdot\text{L}^{-1}\cdot\text{time}^{-1}). An extensive quantity (total amount, mol\text{mol}) pairs with an absolute rate (r×Vr \times V, mol⋅time−1\text{mol}\cdot\text{time}^{-1}).

  • Check whether your rate includes liters in the denominator. If it does, divide the concentration directly, or multiply the rate by total volume before dividing moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the rate r=1.45×10−5 mol⋅L−1⋅min−1r = 1.45 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1} is per liter of culture.

  2. Use the concentration drop Δ[OX2]=2.176×10−4 mol⋅L−1\Delta [\ce{O2}] = 2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1} directly: t=Δ[OX2]rt = \frac{\Delta [\ce{O2}]}{r}.

  3. Compute: t=2.176×10−4 mol⋅L−11.45×10−5 mol⋅L−1⋅min−1=15.007… min≈15.0 mint = \frac{2.176 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}}{1.45 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}} = 15.007\dots\text{ min} \approx 15.0\text{ min}.

Final answer

(a) 5.44×10−4 mol O25.44 \times 10^{-4}\text{ mol O}_2, (b) 15.0 min15.0\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out complete units during kinetic division steps to ensure the final unit simplifies to minutes.

  • Practice switching between volumetric rate rr and total reactor rate R=r×VR = r \times V.

Lock it in

Similar question

01

A yeast culture growing in a 0.750 L0.750\text{ L} chemostat consumes glucose at a steady rate. If the glucose concentration decreases by 3.20×10−3 M3.20 \times 10^{-3}\text{ M}, calculate the total moles of glucose consumed by the culture.

Answer

2.40×10−3 mol2.40 \times 10^{-3}\text{ mol}. Use n=ΔC⋅V=(3.20×10−3 mol⋅L−1)(0.750 L)=2.40×10−3 moln = \Delta C \cdot V = (3.20 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1})(0.750\text{ L}) = 2.40 \times 10^{-3}\text{ mol}.

02

An aerobic bacterial suspension in a 1.80 L1.80\text{ L} bioreactor consumes O2\text{O}_2 at a rate of 2.50×10−5 mol⋅L−1⋅min−12.50 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}. Calculate: (a) the absolute rate of oxygen consumption for the entire bioreactor in mol⋅min−1\text{mol}\cdot\text{min}^{-1}, and (b) the total moles of O2\text{O}_2 consumed in 20.0 min20.0\text{ min}.

Answer

(a) 4.50×10−5 mol⋅min−14.50 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}; (b) 9.00×10−4 mol9.00 \times 10^{-4}\text{ mol}. For (a), R=r⋅V=(2.50×10−5 M⋅min−1)(1.80 L)=4.50×10−5 mol⋅min−1R = r \cdot V = (2.50 \times 10^{-5}\text{ M}\cdot\text{min}^{-1})(1.80\text{ L}) = 4.50 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1}. For (b), n=R⋅t=(4.50×10−5 mol⋅min−1)(20.0 min)=9.00×10−4 moln = R \cdot t = (4.50 \times 10^{-5}\text{ mol}\cdot\text{min}^{-1})(20.0\text{ min}) = 9.00 \times 10^{-4}\text{ mol}.

03

A closed 3.50 L3.50\text{ L} fermenter containing a facultative anaerobe has an initial [extO2][ ext{O}_2] of 1.80×10−4 M1.80 \times 10^{-4}\text{ M}. The cells switch to mixed-acid fermentation when [extO2][ ext{O}_2] drops to 5.00×10−6 M5.00 \times 10^{-6}\text{ M}. If the aerobic consumption rate is 1.25×10−5 mol⋅L−1⋅min−11.25 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}, find: (a) total moles of O2\text{O}_2 consumed before the switch, and (b) the time in minutes until the pathway switch occurs.

Answer

(a) 6.13×10−4 mol6.13 \times 10^{-4}\text{ mol}; (b) 14.0 min14.0\text{ min}. Δ[O2]=1.80×10−4 M−0.05×10−4 M=1.75×10−4 M\Delta [\text{O}_2] = 1.80 \times 10^{-4}\text{ M} - 0.05 \times 10^{-4}\text{ M} = 1.75 \times 10^{-4}\text{ M}. For (a), n=Δ[O2]⋅V=(1.75×10−4 M)(3.50 L)=6.125×10−4 mol≈6.13×10−4 moln = \Delta [\text{O}_2] \cdot V = (1.75 \times 10^{-4}\text{ M})(3.50\text{ L}) = 6.125 \times 10^{-4}\text{ mol} \approx 6.13 \times 10^{-4}\text{ mol}. For (b), t=Δ[O2]r=1.75×10−4 M1.25×10−5 M⋅min−1=14.0 mint = \frac{\Delta [\text{O}_2]}{r} = \frac{1.75 \times 10^{-4}\text{ M}}{1.25 \times 10^{-5}\text{ M}\cdot\text{min}^{-1}} = 14.0\text{ min}.

Loading workspace…