Resources

A sample of human red blood cells is suspended in an aqueous solution containing both 0.100 M0.100\text{ M} sodium chloride (NaCl\text{NaCl}, which fully dissociates into two ions, i=2.0i = 2.0) and 0.100 M0.100\text{ M} urea. The cell membrane is freely permeable to urea via facilitated diffusion uniporters (reflection coefficient σ=0\sigma = 0), but completely impermeable to Na+\text{Na}^+ and Cl−\text{Cl}^- (reflection coefficient σ=1\sigma = 1). The cytosol of the erythrocytes has an initial non-penetrating solute osmolarity of 300 mOsm/L300\text{ mOsm/L} and an initial urea concentration of 0 M0\text{ M}. (a) Calculate the total initial osmolarity of the extracellular solution. (b) Calculate the effective extracellular tonicity (effective osmolarity) that drives long-term steady-state water movement. (c) Predict the net direction of water flow at long-term steady-state equilibrium and the resulting change in cell volume relative to initial baseline.

Answer and steps

Final answer

(a) Total initial external osmolarity: 300 mOsm/L300\text{ mOsm/L}; (b) Effective extracellular tonicity: 200 mOsm/L200\text{ mOsm/L}; (c) Net water enters the cell until cytosol osmolarity reaches 200 mOsm/L200\text{ mOsm/L} of non-penetrating solutes; the cell swells to 1.501.50 times (150%150\%) its initial volume.

Steps

Part (a): Total Initial Extracellular Osmolarity

1. Identify solute contributions to total osmolarity: Osmolarity measures the total number of solute particles per liter of solution, regardless of whether they can cross the cell membrane: Osmolarity=∑(i⋅C)\text{Osmolarity} = \sum (i \cdot C) where ii is the van 't Hoff factor and CC is the molar concentration.

  • For sodium chloride (NaCl\ce{NaCl}): OsmNaCl=2.0⋅0.100 M=0.200 Osm/L=200 mOsm/L\text{Osm}_{\ce{NaCl}} = 2.0 \cdot 0.100\text{ M} = 0.200\text{ Osm/L} = 200\text{ mOsm/L}
  • For urea (a non-dissociating molecule, i=1.0i = 1.0): Osmurea=1.0⋅0.100 M=0.100 Osm/L=100 mOsm/L\text{Osm}_{\text{urea}} = 1.0 \cdot 0.100\text{ M} = 0.100\text{ Osm/L} = 100\text{ mOsm/L}

2. Sum the individual osmolarities: Osmtotal, initial=200 mOsm/L+100 mOsm/L=300 mOsm/L\text{Osm}_{\text{total, initial}} = 200\text{ mOsm/L} + 100\text{ mOsm/L} = 300\text{ mOsm/L}


Part (b): Effective Extracellular Tonicity

1. Distinguish between penetrating and non-penetrating solutes:

  • Non-penetrating solutes (NaX+\ce{Na+} and ClX−\ce{Cl-}, reflection coefficient σ=1\sigma = 1) cannot cross the lipid bilayer, so they exert a permanent osmotic force that drives net water movement.
  • Penetrating solutes (urea, reflection coefficient σ=0\sigma = 0) freely diffuse across the red blood cell membrane via uniporters until their concentrations inside and outside the cell equilibrate. As a result, they do not exert an effective long-term osmotic pressure.

2. Calculate effective osmolarity (tonicity): Effective Osmolarity=∑(σi⋅i⋅Ci)\text{Effective Osmolarity} = \sum (\sigma_i \cdot i \cdot C_i) Effective Osmolarity=(1.0⋅200 mOsm/L)+(0⋅100 mOsm/L)=200 mOsm/L\text{Effective Osmolarity} = (1.0 \cdot 200\text{ mOsm/L}) + (0 \cdot 100\text{ mOsm/L}) = 200\text{ mOsm/L}


Part (c): Long-Term Water Movement and Final Cell Volume

1. Determine the tonicity relative to the cell interior:

  • Initial intracellular non-penetrating osmolarity =300 mOsm/L= 300\text{ mOsm/L}.
  • Effective extracellular osmolarity =200 mOsm/L= 200\text{ mOsm/L}.

Because the effective extracellular osmolarity (200 mOsm/L200\text{ mOsm/L}) is lower than the intracellular non-penetrating osmolarity (300 mOsm/L300\text{ mOsm/L}), the solution is hypotonic.

Common Pitfall: Even though the solution is initially isosmotic to the cell (300 mOsm/L300\text{ mOsm/L} vs. 300 mOsm/L300\text{ mOsm/L}), it is hypotonic because penetrating solutes cannot generate a sustained osmotic gradient.

2. Predict net water flow: Urea diffuses into the erythrocyte until [urea]in=[urea]out=0.100 M[\text{urea}]_{\text{in}} = [\text{urea}]_{\text{out}} = 0.100\text{ M}. Meanwhile, water moves down its osmotic gradient into the cell to dilute the higher concentration of trapped non-penetrating intracellular solutes.

3. Calculate the final equilibrium volume: At steady state, the intracellular concentration of non-penetrating solutes must equal the extracellular concentration of non-penetrating solutes (200 mOsm/L200\text{ mOsm/L}).

Since the total amount of non-penetrating solute inside the cell (nnpn_{\text{np}}) remains constant: Cinitial⋅Vinitial=Cfinal⋅VfinalC_{\text{initial}} \cdot V_{\text{initial}} = C_{\text{final}} \cdot V_{\text{final}} 300 mOsm/L⋅Vinitial=200 mOsm/L⋅Vfinal300\text{ mOsm/L} \cdot V_{\text{initial}} = 200\text{ mOsm/L} \cdot V_{\text{final}} Vfinal=300200⋅Vinitial=1.50⋅VinitialV_{\text{final}} = \frac{300}{200} \cdot V_{\text{initial}} = 1.50 \cdot V_{\text{initial}}

Net water enters the erythrocyte until the cytosol non-penetrating osmolarity decreases to 200 mOsm/L200\text{ mOsm/L}, causing the cell to swell to 1.501.50 times (150%150\%) of its initial volume.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats urea as an effective osmolyte contributing to tonicity, wrongly concluding that total osmolarity determines long-term water flow and that the cell volume will not change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Osmolarity=(0.100 M⋅2.0)+0.100 M=0.200+0.100=0.300 Osm/L=300 mOsm/L\text{Osmolarity} = (0.100\text{ M} \cdot 2.0) + 0.100\text{ M} = 0.200 + 0.100 = 0.300\text{ Osm/L} = 300\text{ mOsm/L}

  2. Step 2

    Effective osmolarity=Total osmolarity=300 mOsm/L\text{Effective osmolarity} = \text{Total osmolarity} = 300\text{ mOsm/L}

    Correct

    Effective Osmolarity=∑(σi⋅i⋅Ci)=(1.0⋅200 mOsm/L)+(0⋅100 mOsm/L)=200 mOsm/L\text{Effective Osmolarity} = \sum (\sigma_i \cdot i \cdot C_i) = (1.0 \cdot 200\text{ mOsm/L}) + (0 \cdot 100\text{ mOsm/L}) = 200\text{ mOsm/L}

    You treated urea as an effective osmolyte. Because the cell membrane is freely permeable to urea (reflection coefficient σ=0\sigma = 0), urea equilibrates across the bilayer and does not exert an effective osmotic force at steady state. Only non-penetrating solutes (NaCl\ce{NaCl}, σ=1.0\sigma = 1.0) contribute to effective tonicity.

  3. Step 3

    Because the extracellular solution is 300 mOsm/L300\text{ mOsm/L} and intracellular osmolarity is 300 mOsm/L300\text{ mOsm/L}, the solution is isotonic, resulting in no net water flow and no change in cell volume.

    Correct

    Net water flows into the cell down the osmotic gradient generated by trapped intracellular solutes until internal non-penetrating osmolarity reaches 200 mOsm/L200\text{ mOsm/L}; final volume is Vfinal=300200⋅Vinitial=1.50⋅VinitialV_{\text{final}} = \frac{300}{200} \cdot V_{\text{initial}} = 1.50 \cdot V_{\text{initial}} (150%150\% of baseline).

    Because your effective osmolarity was set to 300 mOsm/L300\text{ mOsm/L}, you concluded the solution is isotonic. In reality, the effective extracellular osmolarity (200 mOsm/L200\text{ mOsm/L}) is lower than the initial intracellular non-penetrating osmolarity (300 mOsm/L300\text{ mOsm/L}), making the solution hypotonic.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total initial osmolarity by applying the van 't Hoff factor for NaCl\ce{NaCl} and summing the solute concentrations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Osmolarity with Tonicity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that total chemical osmolarity governs long-term water movement, overlooking the reflection coefficient (σ=0\sigma = 0) of penetrating solutes like urea. Solutes that freely permeate the membrane equilibrate between compartments and cannot maintain a permanent osmotic gradient.

REASONING PATH
Your ACEpath teacher’s suggested approach
Osmolarity vs. Tonicity
  • Effective Osmolarity=∑σi⋅Osmi\text{Effective Osmolarity} = \sum \sigma_i \cdot \text{Osm}_i, where σ=1\sigma = 1 for non-penetrating solutes and σ=0\sigma = 0 for freely penetrating solutes.

  • Exclude all penetrating solutes (σ=0\sigma = 0) when calculating effective osmolarity and determining tonicity.

Steady-State Cell Volume
  • Cinitial, np⋅Vinitial=Cfinal, np⋅VfinalC_{\text{initial, np}} \cdot V_{\text{initial}} = C_{\text{final, np}} \cdot V_{\text{final}} for trapped, non-penetrating solutes.

  • Equate the intracellular concentration of non-penetrating solutes to the extracellular non-penetrating osmolarity to calculate volume change.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the effective extracellular osmolarity by weighting each solute by its reflection coefficient: Effective Osmolarity=(1.0⋅200 mOsm/L)+(0⋅100 mOsm/L)=200 mOsm/L\text{Effective Osmolarity} = (1.0 \cdot 200\text{ mOsm/L}) + (0 \cdot 100\text{ mOsm/L}) = 200\text{ mOsm/L}.

  2. Compare the effective external tonicity (200 mOsm/L200\text{ mOsm/L}) to the intracellular non-penetrating solute concentration (300 mOsm/L300\text{ mOsm/L}); since 200 mOsm/L<300 mOsm/L200\text{ mOsm/L} < 300\text{ mOsm/L}, the solution is hypotonic.

  3. Set up conservation of non-penetrating intracellular solutes: 300 mOsm/L⋅Vinitial=200 mOsm/L⋅Vfinal300\text{ mOsm/L} \cdot V_{\text{initial}} = 200\text{ mOsm/L} \cdot V_{\text{final}}, which yields Vfinal=1.50⋅VinitialV_{\text{final}} = 1.50 \cdot V_{\text{initial}}.

Final answer

(a) 300 mOsm/L300\text{ mOsm/L}; (b) 200 mOsm/L200\text{ mOsm/L}; (c) Net water flows into the cell; the cell swells to 1.501.50 times (150%150\%) its initial baseline volume.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Staverman's reflection coefficient σ\sigma and how membrane permeability separates isosmotic solutions from isotonic solutions.

  • Practice calculating final equilibrium cell volumes using conservation of trapped intracellular solutes (C1V1=C2V2C_1 V_1 = C_2 V_2).

OverviewACEpath Teacher's Diagnosis

02 The student forgets that NaCl dissociates into two ions, underestimating both total osmolarity and effective tonicity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Osmolarity=0.100 M+0.100 M=0.200 Osm/L=200 mOsm/L\text{Osmolarity} = 0.100\text{ M} + 0.100\text{ M} = 0.200\text{ Osm/L} = 200\text{ mOsm/L}

    Correct

    Osmolarity=(2.0⋅0.100 M)+(1.0⋅0.100 M)=0.300 Osm/L=300 mOsm/L\text{Osmolarity} = (2.0 \cdot 0.100\text{ M}) + (1.0 \cdot 0.100\text{ M}) = 0.300\text{ Osm/L} = 300\text{ mOsm/L}

    You added the molar concentrations directly without multiplying NaCl\ce{NaCl} by its dissociation factor (i=2.0i = 2.0). Because each formula unit of NaCl\ce{NaCl} dissociates into two particles (NaX+\ce{Na+} and ClX−\ce{Cl-}), its contribution is 0.200 Osm/L0.200\text{ Osm/L}, bringing the total initial osmolarity to 300 mOsm/L300\text{ mOsm/L}.

  2. Step 2

    Effective osmolarity=0.100 Osm/L=100 mOsm/L\text{Effective osmolarity} = 0.100\text{ Osm/L} = 100\text{ mOsm/L}

    Correct

    Effective osmolarity=(1.0⋅200 mOsm/L)+(0⋅100 mOsm/L)=200 mOsm/L\text{Effective osmolarity} = (1.0 \cdot 200\text{ mOsm/L}) + (0 \cdot 100\text{ mOsm/L}) = 200\text{ mOsm/L}

    You correctly identified that penetrating solutes with σ=0\sigma = 0 do not contribute to tonicity, but your numerical answer was affected by omitting the dissociation of NaCl\ce{NaCl} in Step 1. The non-penetrating ions contribute 200 mOsm/L200\text{ mOsm/L}.

  3. Step 3

    Because effective extracellular osmolarity (100 mOsm/L100\text{ mOsm/L}) is less than intracellular osmolarity (300 mOsm/L300\text{ mOsm/L}), water flows into the cells, causing swelling.

    Correct

    Because the effective extracellular osmolarity (200 mOsm/L200\text{ mOsm/L}) is less than the intracellular non-penetrating osmolarity (300 mOsm/L300\text{ mOsm/L}), net water flows into the cell until CinitialVinitial=CfinalVfinalC_{\text{initial}}V_{\text{initial}} = C_{\text{final}}V_{\text{final}}, swelling the cell to 1.501.50 times (150%150\%) its initial volume.

    You correctly concluded that the solution is hypotonic and that water enters the cell to cause swelling. However, your comparison used the propagated value of 100 mOsm/L100\text{ mOsm/L}, and you did not compute the quantitative final volume relative to the baseline.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly excluded the penetrating solute (urea) from the effective osmolarity calculation.

You correctly identified the solution as hypotonic relative to the cell cytosol.

You correctly predicted that water enters the cell and causes it to swell.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of van 't Hoff factor in electrolyte osmolarity

You treated NaCl\ce{NaCl} as an intact single particle rather than multiplying its molar concentration by i=2.0i = 2.0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused molarity with osmolarity for strong electrolytes, overlooking the fact that colligative properties and osmotic pressure depend on the total concentration of dissolved particles produced after full ionic dissociation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Ionic Dissociation
  • For any solute dissociating into ions, Osmolarity=i⋅C\text{Osmolarity} = i \cdot C.

  • Always check the van 't Hoff factor ii before calculating osmolarity; strong electrolytes like NaCl\ce{NaCl} yield multiple solute particles per mole.

Compute Final Volume via Conservation of Solute
  • At steady state, Cinitial, np⋅Vinitial=Cfinal, np⋅VfinalC_{\text{initial, np}} \cdot V_{\text{initial}} = C_{\text{final, np}} \cdot V_{\text{final}} for trapped non-penetrating solutes.

  • Set the final intracellular non-penetrating concentration equal to the extracellular non-penetrating concentration to calculate Vfinal/VinitialV_{\text{final}} / V_{\text{initial}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. OsmNaCl=2.0⋅0.100 M=200 mOsm/L\text{Osm}_{\ce{NaCl}} = 2.0 \cdot 0.100\text{ M} = 200\text{ mOsm/L} and Osmurea=1.0⋅0.100 M=100 mOsm/L\text{Osm}_{\text{urea}} = 1.0 \cdot 0.100\text{ M} = 100\text{ mOsm/L}, so Osmtotal=300 mOsm/L\text{Osm}_{\text{total}} = 300\text{ mOsm/L}.

  2. Effective osmolarity=σNaCl⋅200 mOsm/L+σurea⋅100 mOsm/L=(1.0)(200)+(0)(100)=200 mOsm/L\text{Effective osmolarity} = \sigma_{\ce{NaCl}} \cdot 200\text{ mOsm/L} + \sigma_{\text{urea}} \cdot 100\text{ mOsm/L} = (1.0)(200) + (0)(100) = 200\text{ mOsm/L}.

  3. Compare effective tonicities: 200 mOsm/L<300 mOsm/L200\text{ mOsm/L} < 300\text{ mOsm/L} (hypotonic). Water moves in until 300⋅Vinitial=200⋅Vfinal300 \cdot V_{\text{initial}} = 200 \cdot V_{\text{final}}, so Vfinal=1.50 VinitialV_{\text{final}} = 1.50\,V_{\text{initial}}.

Final answer

(a) 300 mOsm/L300\text{ mOsm/L}; (b) 200 mOsm/L200\text{ mOsm/L}; (c) Net water enters the cell; the cell swells to 1.501.50 times (150%150\%) its initial volume.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the dissociation equation NaCl→NaX++ClX−\ce{NaCl -> Na+ + Cl-} before computing osmolarity to ensure the factor i=2i = 2 is applied.

  • Practice using the dilution relation C1V1=C2V2C_1 V_1 = C_2 V_2 for intracellular non-penetrating particles to calculate precise volume changes.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the osmotic gradient direction, mistakenly stating that water flows down the solute concentration gradient from hypotonic to hypertonic compartments.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Osmolarity=(0.100 M⋅2.0)+0.100 M=0.300 Osm/L=300 mOsm/L\text{Osmolarity} = (0.100\text{ M} \cdot 2.0) + 0.100\text{ M} = 0.300\text{ Osm/L} = 300\text{ mOsm/L}

  2. Step 2

    Effective osmolarity=1.0⋅200 mOsm/L=200 mOsm/L\text{Effective osmolarity} = 1.0 \cdot 200\text{ mOsm/L} = 200\text{ mOsm/L}

  3. Step 3

    Because the outside solution has a lower effective osmolarity (200 mOsm/L200\text{ mOsm/L}) than the inside (300 mOsm/L300\text{ mOsm/L}), water flows out of the cell toward the lower solute concentration, causing cell shrinkage.

    Correct

    Because the extracellular effective osmolarity (200 mOsm/L200\text{ mOsm/L}) is less than the intracellular non-penetrating osmolarity (300 mOsm/L300\text{ mOsm/L}), the solution is hypotonic. Water flows into the cell down its water chemical potential gradient until the cytosol osmolarity dilutes to 200 mOsm/L200\text{ mOsm/L}, causing the cell to swell to Vfinal=300200Vinitial=1.50VinitialV_{\text{final}} = \frac{300}{200}V_{\text{initial}} = 1.50V_{\text{initial}} (150%150\% of baseline volume).

    You correctly identified that the extracellular solution has a lower effective osmolarity, but you inverted the direction of water movement. In osmosis, water moves from an area of lower solute concentration (hypotonic) to higher solute concentration (hypertonic) to dilute the trapped solutes, so water enters the cell and causes it to swell.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total initial osmolarity using the van 't Hoff factor for NaCl\ce{NaCl}.

You correctly applied the reflection coefficient to exclude urea from the effective extracellular tonicity calculation.

You correctly compared the extracellular effective osmolarity (200 mOsm/L200\text{ mOsm/L}) to the intracellular non-penetrating osmolarity (300 mOsm/L300\text{ mOsm/L}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Osmotic Water Flow Direction

You stated that water flows toward the lower solute concentration instead of toward the higher solute concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating solute diffusion with solvent osmosis. Solute molecules diffuse from high to low solute concentration, but water (the solvent) diffuses down its own concentration gradient, meaning water moves from low solute concentration (high water potential) to high solute concentration (low water potential).

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Osmotic Flow
  • Water always flows net toward the compartment with the higher concentration of non-penetrating solutes (from hypotonic to hypertonic).

  • When a solution has lower effective osmolarity than the cell interior, identify it as hypotonic and direct water flow into the cell.

Equilibrium Cell Volume
  • At osmotic steady state, trapped non-penetrating solutes satisfy CinitialVinitial=CfinalVfinalC_{\text{initial}}V_{\text{initial}} = C_{\text{final}}V_{\text{final}}.

  • Solve for final volume using Vfinal=CinitialCfinalVinitialV_{\text{final}} = \frac{C_{\text{initial}}}{C_{\text{final}}}V_{\text{initial}} to determine whether the cell swells (Vfinal>VinitialV_{\text{final}} > V_{\text{initial}}) or shrinks (Vfinal<VinitialV_{\text{final}} < V_{\text{initial}}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Classify the extracellular solution relative to the cell: because the external effective osmolarity (200 mOsm/L200\text{ mOsm/L}) is lower than the internal non-penetrating osmolarity (300 mOsm/L300\text{ mOsm/L}), the solution is hypotonic.

  2. Determine the net direction of water flow: water flows down its chemical potential gradient from the hypotonic solution into the hypertonic cell interior.

  3. Calculate the final steady-state volume using conservation of intracellular non-penetrating solutes: Cinitial⋅Vinitial=Cfinal⋅Vfinal  ⟹  300 mOsm/L⋅Vinitial=200 mOsm/L⋅VfinalC_{\text{initial}} \cdot V_{\text{initial}} = C_{\text{final}} \cdot V_{\text{final}} \implies 300\text{ mOsm/L} \cdot V_{\text{initial}} = 200\text{ mOsm/L} \cdot V_{\text{final}}, which yields Vfinal=1.50⋅VinitialV_{\text{final}} = 1.50 \cdot V_{\text{initial}}.

Final answer

(a) Total initial external osmolarity: 300 mOsm/L300\text{ mOsm/L}; (b) Effective extracellular tonicity: 200 mOsm/L200\text{ mOsm/L}; (c) Net water enters the cell until cytosol non-penetrating osmolarity reaches 200 mOsm/L200\text{ mOsm/L}; the cell swells to 1.501.50 times (150%150\%) its initial volume.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'water chases solute' to immediately lock down the direction of osmosis.

  • Practice equating initial and final solute amounts (C1V1=C2V2C_1 V_1 = C_2 V_2) to compute exact final cell volumes after swelling or shrinking.

Lock it in

Similar question

01

A red blood cell with an initial internal non-penetrating osmolarity of 300 mOsm/L300\text{ mOsm/L} is placed in a solution containing 0.150 M0.150\text{ M} glycerol (penetrating, σ=0\sigma = 0) and 0.150 M NaCl0.150\text{ M}\ \ce{NaCl} (i=2.0i = 2.0, non-penetrating, σ=1\sigma = 1). Calculate: (a) total initial osmolarity, (b) effective tonicity, and (c) the final steady-state volume relative to baseline.

Answer

(a) Total=(0.150⋅1.0)+(0.150⋅2.0)=450 mOsm/L\text{Total} = (0.150 \cdot 1.0) + (0.150 \cdot 2.0) = 450\text{ mOsm/L}. (b) Effective=0⋅150+1.0⋅300=300 mOsm/L\text{Effective} = 0 \cdot 150 + 1.0 \cdot 300 = 300\text{ mOsm/L}. (c) Because effective external osmolarity equals internal non-penetrating osmolarity (300 mOsm/L=300 mOsm/L300\text{ mOsm/L} = 300\text{ mOsm/L}), the solution is isotonic; final volume remains 1.00⋅Vinitial1.00 \cdot V_{\text{initial}} (100%100\%).

02

A mammalian cell with an intracellular non-penetrating solute concentration of 300 mOsm/L300\text{ mOsm/L} is placed into an extracellular solution of 100 mM CaClX2100\text{ mM}\ \ce{CaCl2} (assumed i=3.0i = 3.0, non-penetrating, σ=1\sigma = 1) and 100 mM100\text{ mM} ethanol (penetrating, σ=0\sigma = 0). If the extracellular CaClX2\ce{CaCl2} concentration is then diluted by half with pure water, what is the new equilibrium cell volume relative to initial volume?

Answer

After dilution, [CaClX2]=50 mM[\ce{CaCl2}] = 50\text{ mM}, so effective non-penetrating osmolarity is 50 mM⋅3.0=150 mOsm/L50\text{ mM} \cdot 3.0 = 150\text{ mOsm/L}. At equilibrium, C1V1=C2V2  ⟹  300⋅Vinitial=150⋅VfinalC_1 V_1 = C_2 V_2 \implies 300 \cdot V_{\text{initial}} = 150 \cdot V_{\text{final}}, so Vfinal=2.00⋅VinitialV_{\text{final}} = 2.00 \cdot V_{\text{initial}} (200%200\% of baseline volume).

03

An erythrocyte (300 mOsm/L300\text{ mOsm/L} non-penetrating solutes, initial volume V0=90 fLV_0 = 90\text{ fL}) is suspended in an aqueous solution containing 50 mM NaCl50\text{ mM}\ \ce{NaCl} (i=2.0i = 2.0, σ=1\sigma = 1), 50 mM50\text{ mM} glucose (non-penetrating in this specific cell line, σ=1\sigma = 1), and 200 mM200\text{ mM} urea (penetrating, σ=0\sigma = 0). If red blood cells lyse when their volume expands beyond 140 fL140\text{ fL}, determine whether lysis occurs at long-term equilibrium.

Answer

Effective non-penetrating osmolarity =(50⋅2.0)+(50⋅1.0)=150 mOsm/L= (50 \cdot 2.0) + (50 \cdot 1.0) = 150\text{ mOsm/L} (urea contributes 00). Final volume is Vfinal=90 fL⋅300150=180 fLV_{\text{final}} = 90\text{ fL} \cdot \frac{300}{150} = 180\text{ fL}. Since 180 fL>140 fL180\text{ fL} > 140\text{ fL}, the cell exceeds its maximal hemolytic volume and lyses.

Loading workspace…