Resources

Consider a specialized hypersaline food chain where each trophic transfer has an efficiency of λ=0.120\lambda = 0.120 (12.0%12.0\%). The baseline primary production is E1=3.60×104 kJ/(m2⋅yr)E_1 = 3.60 \times 10^4\text{ kJ}/(\text{m}^2\cdot\text{yr}). Let the minimum annual energetic threshold required to sustain an autonomous breeding population of any vertebrate trophic tier be Ecrit=0.500 kJ/(m2⋅yr)E_{\text{crit}} = 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}). Modeling trophic energy as En=E1⋅λn−1E_n = E_1 \cdot \lambda^{n-1}, compute the theoretical maximum real number of trophic levels nmaxn_{\text{max}} before available energy drops below EcritE_{\text{crit}}, and state the maximum integer number of discrete trophic levels this ecosystem can support.

Answer and steps

Final answer

nmax≈6.27n_{\text{max}} \approx 6.27; the ecosystem can support a maximum of 66 complete trophic levels.

Steps

01

Set Up the Energy Availability Model

The available energy at any trophic level nn decreases exponentially because of thermodynamic inefficiencies (respiration, heat loss, and unconsumed biomass) at each step. Using the given power-law formulation:

En=E1⋅λn−1E_n = E_1 \cdot \lambda^{n-1}

where:

  • E1=3.60×104 kJ/(m2⋅yr)E_1 = 3.60 \times 10^4\text{ kJ}/(\text{m}^2\cdot\text{yr}) is the energy available at the primary producer level (n=1n = 1).
  • λ=0.120\lambda = 0.120 is the ecological trophic transfer efficiency.
  • Ecrit=0.500 kJ/(m2⋅yr)E_{\text{crit}} = 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}) is the minimum energy required to sustain a viable population.

02

Solve for the Continuous Threshold nmaxn_{\text{max}}

To find the theoretical maximum real-valued trophic position nmaxn_{\text{max}} where available energy equals the critical threshold, set En=EcritE_n = E_{\text{crit}}:

E1⋅λnmax−1=EcritE_1 \cdot \lambda^{n_{\text{max}}-1} = E_{\text{crit}}

Substitute the given values into the equation:

(3.60×104)⋅(0.120)nmax−1=0.500(3.60 \times 10^4) \cdot (0.120)^{n_{\text{max}}-1} = 0.500

Isolate the exponential term:

(0.120)nmax−1=0.5003.60×104=172 000≈1.389×10−5(0.120)^{n_{\text{max}}-1} = \frac{0.500}{3.60 \times 10^4} = \frac{1}{72\,000} \approx 1.389 \times 10^{-5}

Take the natural logarithm (ln⁡\ln) of both sides:

(nmax−1)ln⁡(0.120)=ln⁡(172 000)(n_{\text{max}} - 1) \ln(0.120) = \ln\left(\frac{1}{72\,000}\right)

Solve for nmax−1n_{\text{max}} - 1:

nmax−1=ln⁡(1.389×10−5)ln⁡(0.120)≈−11.1844−2.1203≈5.275n_{\text{max}} - 1 = \frac{\ln(1.389 \times 10^{-5})}{\ln(0.120)} \approx \frac{-11.1844}{-2.1203} \approx 5.275

nmax≈1+5.275≈6.27n_{\text{max}} \approx 1 + 5.275 \approx 6.27


03

Determine the Maximum Integer Trophic Levels

Because biological trophic levels represent discrete ecological tiers (n∈{1,2,3,… }n \in \{1, 2, 3, \dots\}), a viable level requires En≥EcritE_n \ge E_{\text{crit}}:

  • At n=6n = 6: E6=(3.60×104)⋅(0.120)5≈0.896 kJ/(m2⋅yr)>0.500 kJ/(m2⋅yr)E_6 = (3.60 \times 10^4) \cdot (0.120)^5 \approx 0.896\text{ kJ}/(\text{m}^2\cdot\text{yr}) > 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}) Level 66 receives sufficient energy to support a population.
  • At n=7n = 7: E7=(3.60×104)⋅(0.120)6≈0.107 kJ/(m2⋅yr)<0.500 kJ/(m2⋅yr)E_7 = (3.60 \times 10^4) \cdot (0.120)^6 \approx 0.107\text{ kJ}/(\text{m}^2\cdot\text{yr}) < 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}) Level 77 falls below the critical threshold EcritE_{\text{crit}} and cannot be sustained.

Therefore, taking the floor of the theoretical real limit:

⌊nmax⌋=⌊6.27⌋=6\lfloor n_{\text{max}} \rfloor = \lfloor 6.27 \rfloor = 6

The theoretical maximum continuous trophic level is nmax≈6.27n_{\text{max}} \approx 6.27, and the ecosystem can support a maximum of 66 complete trophic levels.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student rounds the non-integer level up to the nearest integer instead of taking the floor, not realizing that level 7 would fall below the minimum required energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E1⋅λ(nmax−1)=Ecrit  ⟹  (3.60×104)⋅(0.120)(nmax−1)=0.500  ⟹  (0.120)(nmax−1)=1.389×10−5E_1 \cdot \lambda^{(n_{\text{max}}-1)} = E_{\text{crit}} \implies (3.60 \times 10^4) \cdot (0.120)^{(n_{\text{max}}-1)} = 0.500 \implies (0.120)^{(n_{\text{max}}-1)} = 1.389 \times 10^{-5}

  2. Step 2

    nmax−1=ln⁡(1.389×10−5)ln⁡(0.120)  ⟹  nmax−1=5.275  ⟹  nmax=6.28n_{\text{max}} - 1 = \frac{\ln(1.389 \times 10^{-5})}{\ln(0.120)} \implies n_{\text{max}} - 1 = 5.275 \implies n_{\text{max}} = 6.28

  3. Step 3

    Rounding 6.286.28 to the nearest integer gives 6  ⟹  6 \implies Rounding up to include the next possible level gives 77 levels

    Correct

    ⌊nmax⌋=⌊6.28⌋=6\lfloor n_{\text{max}} \rfloor = \lfloor 6.28 \rfloor = 6 complete trophic levels

    Because available energy decreases at higher trophic levels, level 77 receives E7≈0.107 kJ/(m2⋅yr)E_7 \approx 0.107\text{ kJ}/(\text{m}^2\cdot\text{yr}), which is strictly below Ecrit=0.500 kJ/(m2⋅yr)E_{\text{crit}} = 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}). You must take the floor (round down) rather than rounding up.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the base production and ecological efficiency into the exponential decay model.

You solved the logarithmic equation accurately to obtain the real-valued limit nmax≈6.28n_{\text{max}} \approx 6.28.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect rounding direction for threshold capacity

You recognized that 6.286.28 was between 66 and 77, but chose to round up to include another trophic level instead of rounding down to the last sustainable level.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an energetic upper ceiling with a quota to be covered. When a quantity represents an upper limit or maximum capacity subject to an inequality En≥EcritE_n \ge E_{\text{crit}}, any trophic position exceeding nmaxn_{\text{max}} has insufficient energy to sustain a population, requiring the floor function ⌊nmax⌋\lfloor n_{\text{max}} \rfloor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate the inequality direction
  • For a trophic level to be viable, available energy must satisfy En≥EcritE_n \ge E_{\text{crit}}.

  • Check whether testing n=7n = 7 gives an energy value above or below EcritE_{\text{crit}}.

Apply floor vs. ceiling correctly
  • When finding the maximum number of supported whole units before a declining resource drops below a minimum threshold, take the floor: ⌊nmax⌋\lfloor n_{\text{max}} \rfloor.

  • Always round down to the nearest integer when the upper bound is a real number.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate energy at n=6n = 6: E6=(3.60×104)⋅(0.120)5≈0.896 kJ/(m2⋅yr)>0.500 kJ/(m2⋅yr)E_6 = (3.60 \times 10^4) \cdot (0.120)^5 \approx 0.896\text{ kJ}/(\text{m}^2\cdot\text{yr}) > 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}). Level 66 is fully supported.

  2. Evaluate energy at n=7n = 7: E7=(3.60×104)⋅(0.120)6≈0.107 kJ/(m2⋅yr)<0.500 kJ/(m2⋅yr)E_7 = (3.60 \times 10^4) \cdot (0.120)^6 \approx 0.107\text{ kJ}/(\text{m}^2\cdot\text{yr}) < 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}). Level 77 starves.

  3. Take the integer floor of the continuous limit: ⌊6.28⌋=6\lfloor 6.28 \rfloor = 6.

Final answer

nmax≈6.27n_{\text{max}} \approx 6.27 (or 6.286.28); maximum integer trophic levels supported = 66.

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that trophic positions represent complete, viable populations that cannot survive on partial energy requirements.

  • Plug the integer candidate back into En=E1⋅λn−1E_n = E_1 \cdot \lambda^{n-1} to confirm whether En≥EcritE_n \ge E_{\text{crit}}.

OverviewACEpath Teacher's Diagnosis

02 The student uses an exponent of n instead of n - 1 in the trophic attenuation formula, shifting the calculated trophic limit by one level.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    En=E1⋅λn  ⟹  (3.60×104)⋅(0.120)nmax=0.500E_n = E_1 \cdot \lambda^n \implies (3.60 \times 10^4) \cdot (0.120)^{n_{\text{max}}} = 0.500

    Correct

    En=E1⋅λn−1  ⟹  (3.60×104)⋅(0.120)nmax−1=0.500E_n = E_1 \cdot \lambda^{n-1} \implies (3.60 \times 10^4) \cdot (0.120)^{n_{\text{max}}-1} = 0.500

    You set up the model using En=E1⋅λnE_n = E_1 \cdot \lambda^n instead of the given formula En=E1⋅λn−1E_n = E_1 \cdot \lambda^{n-1}. Because level n=1n = 1 (primary producers) undergoes 00 trophic transfers, the exponent must be n−1n - 1 so that E1=E1⋅λ0E_1 = E_1 \cdot \lambda^0.

  2. Step 2

    (0.120)nmax=1.389×10−5  ⟹  nmax⋅ln⁡(0.120)=ln⁡(1.389×10−5)  ⟹  nmax=−11.185−2.120  ⟹  nmax=5.28(0.120)^{n_{\text{max}}} = 1.389 \times 10^{-5} \implies n_{\text{max}} \cdot \ln(0.120) = \ln(1.389 \times 10^{-5}) \implies n_{\text{max}} = \frac{-11.185}{-2.120} \implies n_{\text{max}} = 5.28

    Correct

    (0.120)nmax−1=1.389×10−5  ⟹  (nmax−1)=ln⁡(1.389×10−5)ln⁡(0.120)≈5.275  ⟹  nmax≈6.27(0.120)^{n_{\text{max}}-1} = 1.389 \times 10^{-5} \implies (n_{\text{max}}-1) = \frac{\ln(1.389 \times 10^{-5})}{\ln(0.120)} \approx 5.275 \implies n_{\text{max}} \approx 6.27

    Your algebraic manipulation and logarithmic calculations were executed accurately, but the resulting value solved for nmaxn_{\text{max}} rather than nmax−1n_{\text{max}} - 1.

  3. Step 3

    Floor of 5.28 gives 5  ⟹  Maximum integer trophic levels=5\text{Floor of } 5.28 \text{ gives } 5 \implies \text{Maximum integer trophic levels} = 5

    Correct

    ⌊nmax⌋=⌊6.27⌋=6\lfloor n_{\text{max}} \rfloor = \lfloor 6.27 \rfloor = 6

    You correctly took the floor of your calculated continuous threshold, but the downstream error led to 55 instead of 66 complete trophic levels.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the exponential term and took natural logarithms of both sides.

You accurately evaluated the quotient of natural logarithms.

You recognized that the number of sustainable discrete trophic levels corresponds to the floor of the continuous threshold.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trophic level index off-by-one in exponential decay formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the trophic level index nn as the number of energetic transfers rather than the tier number itself. In a food chain, tier 11 represents baseline production (00 transfers), so tier nn has undergone n−1n - 1 consecutive transfers.

REASONING PATH
Your ACEpath teacher’s suggested approach
Transfer count vs. trophic level
  • Primary producers sit at trophic level n=1n = 1 and have undergone zero trophic transfers: E1=E1⋅λ0E_1 = E_1 \cdot \lambda^0.

  • Whenever an exponential attenuation model starts with E1E_1, verify that setting n=1n = 1 produces an exponent of 00 (n−1n - 1).

Sanity check the boundary values
  • Directly evaluate EnE_n for candidate integer levels near your answer.

  • Check E6=(3.60×104)(0.120)5≈0.896>0.500E_6 = (3.60 \times 10^4)(0.120)^5 \approx 0.896 > 0.500 to confirm level 66 is biologically viable.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the given attenuation formula: (3.60×104)⋅(0.120)nmax−1=0.500(3.60 \times 10^4) \cdot (0.120)^{n_{\text{max}}-1} = 0.500.

  2. Isolate the power and take natural logs: (nmax−1)=ln⁡(1.389×10−5)ln⁡(0.120)≈5.275(n_{\text{max}} - 1) = \frac{\ln(1.389 \times 10^{-5})}{\ln(0.120)} \approx 5.275.

  3. Solve for the continuous level: nmax≈1+5.275≈6.27n_{\text{max}} \approx 1 + 5.275 \approx 6.27.

  4. Take the floor to find discrete tiers: ⌊6.27⌋=6\lfloor 6.27 \rfloor = 6 complete trophic levels.

Final answer

nmax≈6.27n_{\text{max}} \approx 6.27; the ecosystem can support a maximum of 66 complete trophic levels.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between trophic position nn and the number of step-wise energy losses (n−1n - 1).

  • Practice setting up discrete exponential models by testing n=1n = 1 as an initial condition.

  • Complete the follow-up practice exercises below to solidify logarithmic boundary solving.

OverviewACEpath Teacher's Diagnosis

03 The student uses the decimal percentage 12 instead of the fractional efficiency 0.120, leading to an inverted logarithm calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    (3.60×104)⋅12nmax−1=0.500  ⟹  12nmax−1=0.5003.60×104=1.389×10−5(3.60 \times 10^4) \cdot 12^{n_{\text{max}} - 1} = 0.500 \implies 12^{n_{\text{max}} - 1} = \frac{0.500}{3.60 \times 10^4} = 1.389 \times 10^{-5}

    Correct

    (3.60×104)⋅(0.120)nmax−1=0.500  ⟹  (0.120)nmax−1=1.389×10−5(3.60 \times 10^4) \cdot (0.120)^{n_{\text{max}} - 1} = 0.500 \implies (0.120)^{n_{\text{max}} - 1} = 1.389 \times 10^{-5}

    You substituted λ=12\lambda = 12 instead of the decimal fractional efficiency λ=0.120\lambda = 0.120. Trophic transfer efficiencies expressed as percentages must be converted to dimensionless decimals (12.0%=0.12012.0\% = 0.120) in exponential decay models so that available energy decreases at higher trophic levels.

  2. Step 2

    (nmax−1)⋅ln⁡(12)=ln⁡(1.389×10−5)  ⟹  nmax−1=−11.1852.485=−4.50  ⟹  nmax=−3.50(n_{\text{max}} - 1) \cdot \ln(12) = \ln(1.389 \times 10^{-5}) \implies n_{\text{max}} - 1 = \frac{-11.185}{2.485} = -4.50 \implies n_{\text{max}} = -3.50

    Correct

    (nmax−1)⋅ln⁡(0.120)=ln⁡(1.389×10−5)  ⟹  nmax−1=−11.185−2.120≈5.275  ⟹  nmax≈6.27(n_{\text{max}} - 1) \cdot \ln(0.120) = \ln(1.389 \times 10^{-5}) \implies n_{\text{max}} - 1 = \frac{-11.185}{-2.120} \approx 5.275 \implies n_{\text{max}} \approx 6.27

    Your logarithmic rearrangement was algebraically sound based on your equation, but using ln⁡(12)≈+2.485\ln(12) \approx +2.485 instead of ln⁡(0.120)≈−2.120\ln(0.120) \approx -2.120 inverted the sign of the quotient, resulting in a negative exponent and a negative trophic level.

  3. Step 3

    A negative level is physically impossible, so take the absolute value\text{A negative level is physically impossible, so take the absolute value}   ⟹  \implies Maximum integer trophic levels\text{Maximum integer trophic levels} = 3

    Correct

    ⌊nmax⌋=⌊6.27⌋=6\lfloor n_{\text{max}} \rfloor = \lfloor 6.27 \rfloor = 6

    Because your calculated nmaxn_{\text{max}} was negative, you took its absolute value and truncated it to 33. With the correct value nmax≈6.27n_{\text{max}} \approx 6.27, the floor function gives ⌊6.27⌋=6\lfloor 6.27 \rfloor = 6 complete trophic levels.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the exponential model En=E1⋅λn−1E_n = E_1 \cdot \lambda^{n-1}.

You correctly equated the trophic energy expression to the critical threshold Ecrit=0.500 kJ/(m2⋅yr)E_{\text{crit}} = 0.500\text{ kJ}/(\text{m}^2\cdot\text{yr}).

You applied logarithmic properties correctly to solve for the exponent.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage-to-Decimal Conversion Error

You entered the percentage value 1212 as the base rather than converting 12.0%12.0\% to its decimal equivalent 0.1200.120.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating percentage notation with fractional efficiency in thermodynamic and ecological formulas. Because trophic efficiency is less than 11 (a fraction of energy transferred), entering a base greater than 11 models exponential growth rather than energy loss, flipping the sign of ln⁡(λ)\ln(\lambda).

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage Conversion Check
  • In mathematical models where a rate or efficiency represents a fraction, P%P\% must be converted to P100\frac{P}{100}.

  • Always replace 12.0%12.0\% with 0.1200.120 before evaluating power or exponential equations.

Sign of Logarithm Check
  • For any base 0<b<10 < b < 1, ln⁡(b)\ln(b) must be strictly negative, ensuring that dividing by ln⁡(b)\ln(b) cancels negative logarithms from small fractional ratios.

  • Check that ln⁡(λ)<0\ln(\lambda) < 0 whenever modeling trophic energy loss across successive feeding tiers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the threshold equation with fractional efficiency: (3.60×104)⋅(0.120)nmax−1=0.500(3.60 \times 10^4) \cdot (0.120)^{n_{\text{max}}-1} = 0.500

  2. Isolate the power term: (0.120)nmax−1=0.5003.60×104=1.389×10−5(0.120)^{n_{\text{max}}-1} = \frac{0.500}{3.60 \times 10^4} = 1.389 \times 10^{-5}

  3. Take the natural logarithm of both sides: (nmax−1)ln⁡(0.120)=ln⁡(1.389×10−5)(n_{\text{max}} - 1) \ln(0.120) = \ln(1.389 \times 10^{-5})

  4. Solve for nmaxn_{\text{max}}: nmax−1=−11.1844−2.1203≈5.275  ⟹  nmax≈6.27n_{\text{max}} - 1 = \frac{-11.1844}{-2.1203} \approx 5.275 \implies n_{\text{max}} \approx 6.27

  5. Determine the supported integer tiers by taking the floor: ⌊6.27⌋=6\lfloor 6.27 \rfloor = 6

Final answer

nmax≈6.27n_{\text{max}} \approx 6.27; maximum integer trophic levels =6= 6

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how percentage efficiencies are converted to decimal fractions before inserting them into exponential formulas.

  • Practice identifying whether an ecological model represents exponential growth (base >1> 1) or decay (base <1< 1).

  • Work through the targeted flashcards and practice problems below to master logarithmic solving for trophic chain lengths.

Lock it in

Similar question

01

A coastal pelagic ecosystem has primary producer energy E1=8.00×103 kJ/(m2⋅yr)E_1 = 8.00 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr}) and a trophic transfer efficiency of λ=0.100\lambda = 0.100. If apex predators require at least Ecrit=2.00 kJ/(m2⋅yr)E_{\text{crit}} = 2.00\text{ kJ}/(\text{m}^2\cdot\text{yr}) to maintain a breeding population, compute the continuous maximum level nmaxn_{\text{max}} and find the maximum integer number of complete trophic levels supported.

Answer

nmax≈4.60n_{\text{max}} \approx 4.60, so the ecosystem supports a maximum of 44 complete trophic levels. Key steps: (0.100)nmax−1=2.008000=2.50×10−4  ⟹  nmax−1=log⁡10(2.50×10−4)−1=3.602  ⟹  nmax≈4.60(0.100)^{n_{\text{max}}-1} = \frac{2.00}{8000} = 2.50 \times 10^{-4} \implies n_{\text{max}} - 1 = \frac{\log_{10}(2.50 \times 10^{-4})}{-1} = 3.602 \implies n_{\text{max}} \approx 4.60. Round down: ⌊4.60⌋=4\lfloor 4.60 \rfloor = 4.

02

In an oligotrophic lake, primary production is E1=5.00×103 kJ/(m2⋅yr)E_1 = 5.00 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr}) and transfer efficiency is λ=0.150\lambda = 0.150. If the critical minimum viable population threshold is Ecrit=1.20 kJ/(m2⋅yr)E_{\text{crit}} = 1.20\text{ kJ}/(\text{m}^2\cdot\text{yr}), what is the maximum whole number of trophic levels this lake can support? Verify your answer by calculating the energy available at that level and the subsequent level.

Answer

Maximum supported levels = 55. Key steps: (0.150)n−1=1.205000=2.40×10−4  ⟹  nmax=1+ln⁡(2.40×10−4)ln⁡(0.150)≈1+4.39=5.39(0.150)^{n-1} = \frac{1.20}{5000} = 2.40 \times 10^{-4} \implies n_{\text{max}} = 1 + \frac{\ln(2.40 \times 10^{-4})}{\ln(0.150)} \approx 1 + 4.39 = 5.39. Taking the floor gives n=5n = 5. Verification: E5=5000⋅(0.150)4≈2.53 kJ/(m2⋅yr)>1.20E_5 = 5000 \cdot (0.150)^4 \approx 2.53\text{ kJ}/(\text{m}^2\cdot\text{yr}) > 1.20, whereas E6=5000⋅(0.150)5≈0.38 kJ/(m2⋅yr)<1.20E_6 = 5000 \cdot (0.150)^5 \approx 0.38\text{ kJ}/(\text{m}^2\cdot\text{yr}) < 1.20.

03

An ecosystem currently supports 44 trophic levels with E1=1.00×104 kJ/(m2⋅yr)E_1 = 1.00 \times 10^4\text{ kJ}/(\text{m}^2\cdot\text{yr}) and Ecrit=0.800 kJ/(m2⋅yr)E_{\text{crit}} = 0.800\text{ kJ}/(\text{m}^2\cdot\text{yr}). What is the minimum trophic efficiency λ\lambda required for the ecosystem to support a 5th5\text{th} complete trophic level?

Answer

Minimum λ≈0.0946\lambda \approx 0.0946 (9.46%9.46\%). Key steps: For a viable 5th5\text{th} level, E5≥Ecrit  ⟹  E1⋅λ5−1≥Ecrit  ⟹  (1.00×104)⋅λ4≥0.800E_5 \ge E_{\text{crit}} \implies E_1 \cdot \lambda^{5-1} \ge E_{\text{crit}} \implies (1.00 \times 10^4) \cdot \lambda^4 \ge 0.800. Solve for λ\lambda: λ4≥8.00×10−5  ⟹  λ≥(8.00×10−5)1/4≈0.09457\lambda^4 \ge 8.00 \times 10^{-5} \implies \lambda \ge (8.00 \times 10^{-5})^{1/4} \approx 0.09457.

Loading workspace…