Resources
In a laboratory experiment investigating tissue osmolarity via the gravimetric method, five identical sets of Solanum tuberosum (potato) cores, each having an initial mass of , were bathed for in open sucrose solutions of concentrations , , , , and at . The recorded final masses were , , , , and , respectively. The percent mass change shows a linear relationship with sucrose molarity : . (a) Determine the internal solute concentration of the potato cells where no net water movement occurs. (b) Calculate the solute potential () of the potato tissue at () using the formula , where and .
Answer and steps
Final answer
(a) Internal concentration: ; (b) Solute potential: (or ).
Steps
Part (a): Determine the Internal Solute Concentration
- Understand the Condition of Zero Net Water Movement: When plant tissue is placed in an isotonic solution (a solution whose osmolarity equals the internal osmolarity of the cells), the rate of water entering the cells equals the rate of water leaving them. Consequently, there is no net movement of water, and the tissue experiences zero change in mass:
-
Calculate the Isotonic Molarity (): Using the given linear regression line relating percent mass change to the molarity of sucrose :
Set and solve for :
Rounded to three significant figures, the internal solute concentration of the potato tissue is .
Part (b): Calculate the Solute Potential ()
-
Identify the Solute Potential Formula and Given Parameters: The solute (osmotic) potential represents the effect of dissolved solutes on water potential and is calculated as:
- Ionization constant for sucrose, (sucrose does not dissociate in water).
- Molar concentration of tissue, (or ).
- Pressure constant, .
- Absolute temperature, .
-
Compute :
(Note: Since , this is equivalently . Always remember the negative sign, as the addition of solutes always lowers the water potential below zero).
Typical errors
01 The student forgets the negative sign in the solute potential formula, calculating a positive value for Ψs.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
\Psi_s = iCRT \Psi_s = (1.0)(0.271)(0.08314)(295.15) \Psi_s = 6.65
Correct\Psi_s = -iCRT \Psi_s = -(1.0)(0.2714)(0.08314)(295.15) -6.65
The formula for solute potential contains an essential negative sign: . Dissolving solutes lowers the free energy of water relative to pure water, so solute potential must always be zero or negative.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that zero net water movement corresponds to zero percent change in tissue mass.
You accurately calculated the internal molar concentration of the potato tissue as .
You correctly substituted all numeric constants and the absolute temperature into the solute potential expression.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the negative sign in , yielding rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating osmotic pressure (, a positive colligative property) with solute potential (, which represents the reduction in water potential caused by solute particles).
REASONING PATH
Your ACEpath teacher’s suggested approach- Water Potential Scale Anchor
Pure water at atmospheric pressure has . Adding solute always reduces water potential below zero.
Check that your calculated solute potential is always negative () for any solution containing dissolved solutes.
- Formula Sign Verification
The standard plant water potential equation is , where .
Write down the formula with the explicit leading negative sign before substituting values.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the full solute potential formula with its negative sign: .
Substitute , , , and : .
Multiply the factors to obtain the negative solute potential: .
(a) Internal concentration: ; (b) Solute potential: (or )
02 The student misidentifies the condition of no net mass change as setting molarity M = 0 instead of Δm(%) = 0, using the y-intercept of 19.0 as the concentration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
No net movement means
CorrectNo net movement of water means the potato tissue neither gains nor loses mass, which corresponds to (the -intercept), not (the -intercept). Setting represents pure water, where cells swell and gain mass.
- Step 2
\Psi_s = -iCRT \Psi_s = -(1.0)(19.0)(0.08314)(295.15) \Psi_s = -466
CorrectYou correctly chose the formula and correctly substituted the constants , , and , but the final numerical value is incorrect because it carried forward the incorrect concentration from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the solute potential equation .
You properly converted the Celsius temperature to Kelvin.
You correctly substituted the ionization constant and gas constant into the equation.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the dependent variable (percent mass change, ) with the independent variable (solution molarity, ). In osmolarity experiments, the isotonic point occurs when mass does not change (), which is the horizontal intercept of the graph, not when external concentration is zero ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Condition for Zero Net Water Movement
Net water flux is zero when tissue is in an isotonic environment, meaning mass change is zero: .
Always set the dependent variable or to and solve for the concentration (-intercept).
- Biological Plausibility Check
Living plant cell cytoplasm typically has an osmolarity between and , never dozens of molar.
Verify that your calculated tissue concentration is within a biologically realistic range for plant tissues.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the mass change condition to zero net flux: .
Solve the linear equation for sucrose molarity: .
Substitute into : .
(a) ; (b) (or )
03 The student uses the Celsius temperature of 22.0 instead of the absolute temperature in Kelvin when calculating the solute potential.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
, with
You stated the correct formula for solute potential, but you recorded directly as in Celsius rather than converting it to absolute temperature in Kelvin ().
- Step 3Correct
Your arithmetic was carried out accurately using your chosen temperature, but the resulting value of is off by a factor of more than 13 because of the Celsius substitution.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set the percent mass change to zero to identify the isotonic point.
You solved the linear equation accurately to obtain an internal concentration of .
You selected the correct formula for solute potential and used the proper ionization and gas constant values.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the Celsius temperature directly into without converting it to Kelvin.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThe ideal gas and thermodynamic constant has Kelvin () in its denominator, which requires temperature to be expressed in absolute units ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the units of R
The gas constant is expressed in units involving .
Always convert temperature to Kelvin using before multiplying.
- Sanity check solute potential magnitude
Typical plant cell solute potentials at room temperature range from approximately to for tenths-of-molar concentrations.
If your calculated magnitude is under for a concentration near , verify that temperature was multiplied by roughly rather than .
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
What is the maximum possible value of solute potential () in any aqueous system, and when does it occur?
(or ), which occurs only in pure water. Adding any dissolved solute always makes strictly negative.
Similar question
A plant cell with an internal sucrose concentration of is at an equilibrium temperature of (). Calculate the solute potential () of the cell contents in bars, using and .
Answer
.
In a potato osmolarity lab, the linear regression for percent mass change is . Find the tissue's solute potential at () using and .
Answer
Step 1: Set . Step 2: Calculate solute potential: .
A plant cell has an internal concentration of completely dissociated () at (). It is placed in an open beaker of sucrose solution () at the same temperature. Using , calculate for both the cell and the beaker solution, and determine the direction of net water flow.
Answer
Cell: . Beaker: . Since the beaker has a higher (less negative) water potential (), net water flows from the beaker into the cell.