Resources

A seedling primary root growing vertically downward encounters an obstacle while also navigating a horizontal moisture gradient, creating coupled hydrotropic and gravitropic vectors. Gravitropic stimulus produces an intrinsic downward bending angular acceleration of αg=0.040 rad/h2\alpha_g = 0.040\text{ rad/h}^2, directed at an angle of ϕg=−90.0∘\phi_g = -90.0^\circ (along the negative yy-axis). Simultaneously, an asymmetric water potential gradient across the rhizosphere ( ΔΨw=0.60 MPa\,\Delta \Psi_w = 0.60\text{ MPa} over Δx=3.0 mm\Delta x = 3.0\text{ mm}) drives a hydrotropic angular acceleration directed horizontally along the positive xx-axis ( ϕh=0.0∘\,\phi_h = 0.0^\circ) with magnitude αh=ch∣dΨwdx∣\alpha_h = c_h \left|\frac{d\Psi_w}{dx}\right|, where ch=0.150 rad⋅mm/(h2⋅MPa)c_h = 0.150\text{ rad}\cdot\text{mm}/(\text{h}^2\cdot\text{MPa}). Assuming both tropisms superimpose linearly from rest (initial angular velocity ω0=0.00 rad/h\omega_0 = 0.00\text{ rad/h}): (a) calculate the magnitude of the net angular acceleration αnet\alpha_{\text{net}} of the root tip in rad/h2\text{rad/h}^2, and (b) determine the resultant direction angle θnet\theta_{\text{net}} of the root trajectory in degrees relative to the positive horizontal xx-axis.

Answer and steps

Final answer

(a) αnet=0.050 rad/h2\alpha_{\text{net}} = 0.050\text{ rad/h}^2; (b) θnet=−53.1∘\theta_{\text{net}} = -53.1^\circ (or 53.1∘53.1^\circ below the horizontal axis toward moisture)

Steps

01

Calculate the magnitude of the hydrotropic acceleration (αh\alpha_h)

Plant roots orient their growth by integrating multiple environmental cues (tropisms). When gravitropic and hydrotropic stimuli act simultaneously, their directional responses can be represented as perpendicular vector components in a Cartesian coordinate frame.

First, determine the magnitude of the water potential gradient across the root zone (rhizosphere): ∣dΨwdx∣=ΔΨwΔx=0.60 MPa3.0 mm=0.20 MPa/mm\left|\frac{d\Psi_w}{dx}\right| = \frac{\Delta \Psi_w}{\Delta x} = \frac{0.60\text{ MPa}}{3.0\text{ mm}} = 0.20\text{ MPa/mm}

Now, calculate the hydrotropic angular acceleration using the given sensitivity coefficient chc_h: αh=ch∣dΨwdx∣=(0.150 rad⋅mm/(h2⋅MPa))(0.20 MPa/mm)=0.030 rad/h2\alpha_h = c_h \left|\frac{d\Psi_w}{dx}\right| = \left(0.150\text{ rad}\cdot\text{mm}/(\text{h}^2\cdot\text{MPa})\right)(0.20\text{ MPa/mm}) = 0.030\text{ rad/h}^2

Because the moisture gradient is oriented along the positive xx-axis (ϕh=0.0∘\phi_h = 0.0^\circ), this gives an acceleration vector of: α⃗h=(0.030i^+0j^) rad/h2\vec{\alpha}_h = (0.030\hat{i} + 0\hat{j})\text{ rad/h}^2


02

Formulate the gravitropic acceleration vector (α⃗g\vec{\alpha}_g)

The downward gravitropic stimulus acts vertically along the negative yy-axis (ϕg=−90.0∘\phi_g = -90.0^\circ) with a magnitude of αg=0.040 rad/h2\alpha_g = 0.040\text{ rad/h}^2: α⃗g=(0i^−0.040j^) rad/h2\vec{\alpha}_g = (0\hat{i} - 0.040\hat{j})\text{ rad/h}^2


03

Find the magnitude of the net angular acceleration (αnet\alpha_{\text{net}})

By linear superposition, the components of the net angular acceleration vector α⃗net\vec{\alpha}_{\text{net}} are: αx=0.030 rad/h2\alpha_x = 0.030\text{ rad/h}^2 αy=−0.040 rad/h2\alpha_y = -0.040\text{ rad/h}^2

Use the Pythagorean theorem to find the magnitude: αnet=αx2+αy2=(0.030)2+(−0.040)2=0.0009+0.0016=0.0025=0.050 rad/h2\alpha_{\text{net}} = \sqrt{\alpha_x^2 + \alpha_y^2} = \sqrt{(0.030)^2 + (-0.040)^2} = \sqrt{0.0009 + 0.0016} = \sqrt{0.0025} = 0.050\text{ rad/h}^2


04

Determine the resultant direction angle (θnet\theta_{\text{net}})

The angle θnet\theta_{\text{net}} relative to the positive horizontal xx-axis is given by the inverse tangent: θnet=arctan⁡(αyαx)=arctan⁡(−0.0400.030)=arctan⁡(−43)≈−53.1∘\theta_{\text{net}} = \arctan\left(\frac{\alpha_y}{\alpha_x}\right) = \arctan\left(\frac{-0.040}{0.030}\right) = \arctan\left(-\frac{4}{3}\right) \approx -53.1^\circ

Common Pitfall: Ensure you note the negative sign or quadrant correctly: an angle of −53.1∘-53.1^\circ means the root tip bends into the fourth quadrant, pointing 53.1∘53.1^\circ below the positive horizontal axis toward the combined influence of moisture and gravity.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the scalar magnitudes directly instead of combining the perpendicular acceleration vectors using the Pythagorean theorem, obtaining 0.070 rad/h².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∣dΨwdx∣=0.603.0=0.20 MPa/mm  ⟹  αh=0.150×0.20=0.030 rad/h2\left|\frac{d\Psi_w}{dx}\right| = \frac{0.60}{3.0} = 0.20\text{ MPa/mm} \implies \alpha_h = 0.150 \times 0.20 = 0.030\text{ rad/h}^2

  2. Step 2

    αnet=αh+αg=0.030+0.040=0.070 rad/h2\alpha_{\text{net}} = \alpha_h + \alpha_g = 0.030 + 0.040 = 0.070\text{ rad/h}^2

    Correct

    αnet=αh2+αg2=(0.030)2+(−0.040)2=0.050 rad/h2\alpha_{\text{net}} = \sqrt{\alpha_h^2 + \alpha_g^2} = \sqrt{(0.030)^2 + (-0.040)^2} = 0.050\text{ rad/h}^2

    Because hydrotropism acts horizontally along the positive xx-axis and gravitropism acts vertically downward along the negative yy-axis, the two vectors are perpendicular (90∘90^\circ apart). You must combine them using vector addition via the Pythagorean theorem rather than direct scalar addition.

  3. Step 3

    tan⁡(θ)=αyαx=−0.0400.030  ⟹  θnet=arctan⁡(−0.0400.030)=−53.1∘\tan(\theta) = \frac{\alpha_y}{\alpha_x} = \frac{-0.040}{0.030} \implies \theta_{\text{net}} = \arctan\left(-\frac{0.040}{0.030}\right) = -53.1^\circ

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the water potential gradient across the root zone.

You accurately evaluated the magnitude of the hydrotropic response.

You correctly formulated and solved the trigonometric ratio to find the angle θnet\theta_{\text{net}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar vs. vector superposition error

You recognized that the directional components were αx=0.030\alpha_x = 0.030 and αy=−0.040\alpha_y = -0.040 when finding the angle, but you treated them as collinear scalars when finding the resultant magnitude.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing scalar addition with vector addition when combining perpendicular directional stimuli in biological tropisms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check vector orthogonality
  • When stimuli act along perpendicular axes (xx and yy), the magnitude of the resultant vector is given by ∥R⃗∥=Rx2+Ry2\|\vec{R}\| = \sqrt{R_x^2 + R_y^2}.

  • Always draw a vector diagram and sum perpendicular components using the Pythagorean theorem rather than adding their absolute values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the horizontal and vertical vector components: αx=αh=0.030 rad/h2\alpha_x = \alpha_h = 0.030\text{ rad/h}^2 and αy=−αg=−0.040 rad/h2\alpha_y = -\alpha_g = -0.040\text{ rad/h}^2.

  2. Apply the Pythagorean theorem: αnet=αx2+αy2=(0.030)2+(−0.040)2\alpha_{\text{net}} = \sqrt{\alpha_x^2 + \alpha_y^2} = \sqrt{(0.030)^2 + (-0.040)^2}.

  3. Evaluate the sum of squares: 0.0009+0.0016=0.0025=0.050 rad/h2\sqrt{0.0009 + 0.0016} = \sqrt{0.0025} = 0.050\text{ rad/h}^2.

Final answer

(a) αnet=0.050 rad/h2\alpha_{\text{net}} = 0.050\text{ rad/h}^2; (b) θnet=−53.1∘\theta_{\text{net}} = -53.1^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector magnitude calculation for orthogonal components in two dimensions.

  • Practice identifying when directional cues (such as gravitropism, phototropism, and hydrotropism) act concurrently along different spatial axes.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the tangent ratio as x-component over y-component, measuring the trajectory angle relative to the vertical axis rather than the positive horizontal x-axis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∣dΨwdx∣=0.603.0=0.20 MPa/mm  ⟹  αh=0.150∗0.20=0.030 rad/h2\left|\frac{d\Psi_w}{dx}\right| = \frac{0.60}{3.0} = 0.20\text{ MPa/mm} \implies \alpha_h = 0.150 * 0.20 = 0.030\text{ rad/h}^2

  2. Step 2

    αnet=0.0302+0.0402=0.0025=0.050 rad/h2\alpha_{\text{net}} = \sqrt{0.030^2 + 0.040^2} = \sqrt{0.0025} = 0.050\text{ rad/h}^2

  3. Step 3

    tan⁡(θ)=αxαy=0.030−0.040=−0.75\tan(\theta) = \frac{\alpha_x}{\alpha_y} = \frac{0.030}{-0.040} = -0.75

    Correct

    tan⁡(θnet)=αyαx=−0.0400.030=−43≈−1.333\tan(\theta_{\text{net}}) = \frac{\alpha_y}{\alpha_x} = \frac{-0.040}{0.030} = -\frac{4}{3} \approx -1.333

    To determine the angle relative to the positive horizontal xx-axis, the tangent ratio is defined as the vertical component over the horizontal component (oppositeadjacent=αyαx\frac{\text{opposite}}{\text{adjacent}} = \frac{\alpha_y}{\alpha_x}). You placed αx\alpha_x in the numerator and αy\alpha_y in the denominator.

  4. Step 4

    θnet=arctan⁡(−0.75)=−36.9∘\theta_{\text{net}} = \arctan(-0.75) = -36.9^\circ

    Correct

    θnet=arctan⁡(−43)≈−53.1∘\theta_{\text{net}} = \arctan\left(-\frac{4}{3}\right) \approx -53.1^\circ

    Because your tangent ratio was inverted in Step 3, evaluating arctan⁡(−0.75)\arctan(-0.75) gave the complementary angle relative to the vertical line rather than the trajectory relative to the positive horizontal axis.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the horizontal water potential gradient and hydrotropic angular acceleration accurately.

You properly recognized that hydrotropism and gravitropism act along orthogonal axes.

You computed the resultant acceleration magnitude correctly using vector superposition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted tangent ratio for vector direction angle

You set up the trigonometric ratio as tan⁡θ=αxαy\tan\theta = \frac{\alpha_x}{\alpha_y} instead of tan⁡θ=αyαx\tan\theta = \frac{\alpha_y}{\alpha_x}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You measured the root's angle relative to the vertical gravitational axis instead of the requested standard coordinate angle measured from the positive horizontal xx-axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Axis for Vector Angle
  • For any 2D vector A⃗=Axi^+Ayj^\vec{A} = A_x\hat{i} + A_y\hat{j}, the angle θ\theta measured from the positive horizontal xx-axis is given by tan⁡θ=AyAx=vertical componenthorizontal component\tan\theta = \frac{A_y}{A_x} = \frac{\text{vertical component}}{\text{horizontal component}}.

  • Always sketch the right triangle on standard Cartesian axes and verify that the opposite side corresponds to the vertical (yy) component.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the vector components: αx=+0.030 rad/h2\alpha_x = +0.030\text{ rad/h}^2 and αy=−0.040 rad/h2\alpha_y = -0.040\text{ rad/h}^2.

  2. Form the correct tangent ratio relative to the horizontal xx-axis: tan⁡θnet=αyαx=−0.0400.030=−43\tan\theta_{\text{net}} = \frac{\alpha_y}{\alpha_x} = \frac{-0.040}{0.030} = -\frac{4}{3}.

  3. Take the inverse tangent: θnet=arctan⁡(−43)≈−53.1∘\theta_{\text{net}} = \arctan\left(-\frac{4}{3}\right) \approx -53.1^\circ.

Final answer

(a) αnet=0.050 rad/h2\alpha_{\text{net}} = 0.050\text{ rad/h}^2; (b) θnet=−53.1∘\theta_{\text{net}} = -53.1^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the coordinate axes with the vector components whenever resolving directional growth responses.

  • Double-check whether a direction angle question asks for deviation from the vertical or standard direction from the positive xx-axis.

  • Practice vector direction problems to reinforce that tan⁡θ=yx\tan\theta = \frac{y}{x}.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the water potential gradient formula by dividing distance by potential change, resulting in an incorrect hydrotropic acceleration of 0.75 rad/h².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    gradient=ΔxΔΨw=3.00.60=5.0 mm/MPa  ⟹  αh=0.150∗5.0=0.75 rad/h2\text{gradient} = \frac{\Delta x}{\Delta \Psi_w} = \frac{3.0}{0.60} = 5.0\text{ mm/MPa} \implies \alpha_h = 0.150 * 5.0 = 0.75\text{ rad/h}^2

    Correct

    ∣dΨwdx∣=ΔΨwΔx=0.60 MPa3.0 mm=0.20 MPa/mm  ⟹  αh=0.150×0.20=0.030 rad/h2\left|\frac{d\Psi_w}{dx}\right| = \frac{\Delta \Psi_w}{\Delta x} = \frac{0.60\text{ MPa}}{3.0\text{ mm}} = 0.20\text{ MPa/mm} \implies \alpha_h = 0.150 \times 0.20 = 0.030\text{ rad/h}^2

    A spatial gradient represents the change in a physical quantity per unit distance, so it is defined as ΔΨwΔx\frac{\Delta \Psi_w}{\Delta x}, not ΔxΔΨw\frac{\Delta x}{\Delta \Psi_w}. Inverting this ratio made your hydrotropic acceleration 25 times too large.

  2. Step 2

    αnet=0.752+0.0402=0.5625+0.0016=0.5641≈0.751 rad/h2\alpha_{\text{net}} = \sqrt{0.75^2 + 0.040^2} = \sqrt{0.5625 + 0.0016} = \sqrt{0.5641} \approx 0.751\text{ rad/h}^2

    Correct

    αnet=(0.030)2+(−0.040)2=0.0009+0.0016=0.050 rad/h2\alpha_{\text{net}} = \sqrt{(0.030)^2 + (-0.040)^2} = \sqrt{0.0009 + 0.0016} = 0.050\text{ rad/h}^2

    Your application of the Pythagorean theorem for perpendicular vector components is algebraically correct, but the numerical result is affected by the incorrect value of αh\alpha_h from Step 1.

  3. Step 3

    \tan(θ\theta) = αyαx\frac{\alpha_y}{\alpha_x} = −0.0400.75\frac{-0.040}{0.75} ≈\approx -0.0533   ⟹  \implies θ\theta{net\text{net}} = \arctan(-0.0533) ≈\approx -3.1^∘\circ

    Correct

    θnet=arctan⁡(αyαx)=arctan⁡(−0.0400.030)≈−53.1∘\theta_{\text{net}} = \arctan\left(\frac{\alpha_y}{\alpha_x}\right) = \arctan\left(\frac{-0.040}{0.030}\right) \approx -53.1^\circ

    You correctly set up the tangent ratio and solved for the fourth-quadrant angle, but substituting the inflated αx\alpha_x led to an angle that drastically underestimates downward bending.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the horizontal hydrotropic stimulus and vertical gravitropic stimulus act as perpendicular vector components.

You applied the Pythagorean theorem accurately to find the resultant vector magnitude.

You correctly identified that the angle relative to the positive horizontal axis is given by arctan⁡(αyαx)\arctan\left(\frac{\alpha_y}{\alpha_x}\right) and properly retained the negative sign for downward bending.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Gradient Definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined the gradient as distance divided by potential change ($ Δ\Delta x / Δ\Delta \Psi_w)ratherthanrateofchangewithrespecttodistance() rather than rate of change with respect to distance (d\Psi_w / dx).Trackingthephysicalunitsoftheconstant). Tracking the physical units of the constant c_h( ([\text{rad}$$\cdot$$\text{mm}/(h\text{h}^2\cdot$$\text{MPa})]) would have signaled that the gradient must have units of $$\text{MPa/mm}$.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gradient Definition
  • A spatial gradient is the derivative of a field variable with respect to position: dϕdx≈ΔϕΔx\frac{d\phi}{dx} \approx \frac{\Delta \phi}{\Delta x} (units of [variable]/[length][\text{variable}]/[\text{length}]).

  • Always verify that distance is in the denominator when calculating a spatial gradient.

Dimensional Consistency Check
  • Multiplying ch [rad⋅mm/(h2⋅MPa)]c_h \,[\text{rad}\cdot\text{mm}/(\text{h}^2\cdot\text{MPa})] by a gradient requires units of [MPa/mm][\text{MPa/mm}] to yield [rad/h2][\text{rad/h}^2].

  • Perform a quick dimensional analysis on intermediate products before proceeding to vector integration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct water potential gradient across the rhizosphere: ∣dΨwdx∣=ΔΨwΔx=0.60 MPa3.0 mm=0.20 MPa/mm\left|\frac{d\Psi_w}{dx}\right| = \frac{\Delta \Psi_w}{\Delta x} = \frac{0.60\text{ MPa}}{3.0\text{ mm}} = 0.20\text{ MPa/mm}.

  2. Compute the hydrotropic acceleration: αh=ch∣dΨwdx∣=(0.150 rad⋅mm/(h2⋅MPa))(0.20 MPa/mm)=0.030 rad/h2\alpha_h = c_h \left|\frac{d\Psi_w}{dx}\right| = (0.150\text{ rad}\cdot\text{mm}/(\text{h}^2\cdot\text{MPa}))(0.20\text{ MPa/mm}) = 0.030\text{ rad/h}^2.

  3. Combine the perpendicular components αx=0.030 rad/h2\alpha_x = 0.030\text{ rad/h}^2 and αy=−0.040 rad/h2\alpha_y = -0.040\text{ rad/h}^2: αnet=(0.030)2+(−0.040)2=0.050 rad/h2\alpha_{\text{net}} = \sqrt{(0.030)^2 + (-0.040)^2} = 0.050\text{ rad/h}^2.

  4. Determine the trajectory angle: θnet=arctan⁡(−0.0400.030)=arctan⁡(−43)≈−53.1∘\theta_{\text{net}} = \arctan\left(\frac{-0.040}{0.030}\right) = \arctan\left(-\frac{4}{3}\right) \approx -53.1^\circ.

Final answer

(a) αnet=0.050 rad/h2\alpha_{\text{net}} = 0.050\text{ rad/h}^2; (b) θnet=−53.1∘\theta_{\text{net}} = -53.1^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how spatial derivatives and gradients are defined across biological membranes and soil zones.

  • Practice checking units on intermediate variables to catch inverted fractions early.

  • Re-evaluate vector addition problems where perpendicular stimuli combine into a single growth response.

Lock it in

Similar question

01

A primary root experiences a downward gravitropic angular acceleration of αg=0.120 rad/h2\alpha_g = 0.120\text{ rad/h}^2 and a lateral hydrotropic angular acceleration of αh=0.050 rad/h2\alpha_h = 0.050\text{ rad/h}^2 along the positive horizontal axis. Calculate the net angular acceleration magnitude αnet\alpha_{\text{net}}.

Answer

αnet=0.130 rad/h2\alpha_{\text{net}} = 0.130\text{ rad/h}^2. Since the two vectors are perpendicular, αnet=αh2+αg2=(0.050)2+(0.120)2=0.0025+0.0144=0.0169=0.130 rad/h2\alpha_{\text{net}} = \sqrt{\alpha_h^2 + \alpha_g^2} = \sqrt{(0.050)^2 + (0.120)^2} = \sqrt{0.0025 + 0.0144} = \sqrt{0.0169} = 0.130\text{ rad/h}^2.

02

A seedling stem exhibits negative gravitropism vertically upward with an acceleration of ay=0.080 cm/h2a_y = 0.080\text{ cm/h}^2 and positive phototropism toward a lateral light source with an acceleration of ax=0.060 cm/h2a_x = 0.060\text{ cm/h}^2. Determine: (a) the magnitude of the net growth acceleration, and (b) its angle θ\theta relative to the horizontal light axis.

Answer

(a) anet=0.100 cm/h2a_{\text{net}} = 0.100\text{ cm/h}^2; (b) θ=53.1∘\theta = 53.1^\circ. Key steps: anet=0.0602+0.0802=0.100 cm/h2a_{\text{net}} = \sqrt{0.060^2 + 0.080^2} = 0.100\text{ cm/h}^2; θ=arctan⁡(ay/ax)=arctan⁡(0.080/0.060)≈53.1∘\theta = \arctan(a_y / a_x) = \arctan(0.080 / 0.060) \approx 53.1^\circ above the horizontal.

03

A root encountering a diagonal soil density barrier experiences an effective hydrotropic bending stimulus at an angle of 30.0∘30.0^\circ below the horizontal of magnitude α1=0.060 rad/h2\alpha_1 = 0.060\text{ rad/h}^2, alongside a pure vertical gravitropism α2=0.040 rad/h2\alpha_2 = 0.040\text{ rad/h}^2 downward (−90.0∘-90.0^\circ). Resolve both stimuli into components and calculate the net angular acceleration magnitude αnet\alpha_{\text{net}}.

Answer

αnet≈0.087 rad/h2\alpha_{\text{net}} \approx 0.087\text{ rad/h}^2. Key steps: Resolve α⃗1\vec{\alpha}_1: α1x=0.060cos⁡(−30∘)≈0.05196 rad/h2\alpha_{1x} = 0.060\cos(-30^\circ) \approx 0.05196\text{ rad/h}^2, α1y=0.060sin⁡(−30∘)=−0.0300 rad/h2\alpha_{1y} = 0.060\sin(-30^\circ) = -0.0300\text{ rad/h}^2. Resolve α⃗2\vec{\alpha}_2: α2x=0\alpha_{2x} = 0, α2y=−0.0400 rad/h2\alpha_{2y} = -0.0400\text{ rad/h}^2. Total components: αx=0.05196\alpha_x = 0.05196, αy=−0.0300−0.0400=−0.0700 rad/h2\alpha_y = -0.0300 - 0.0400 = -0.0700\text{ rad/h}^2. Magnitude: αnet=(0.05196)2+(−0.0700)2=0.00270+0.00490=0.00760≈0.0872 rad/h2\alpha_{\text{net}} = \sqrt{(0.05196)^2 + (-0.0700)^2} = \sqrt{0.00270 + 0.00490} = \sqrt{0.00760} \approx 0.0872\text{ rad/h}^2.

Loading workspace…