Resources

A fixed amount of liver arginase (0.050 mg0.050\text{ mg}) is assayed in a buffered solution at 30∘C30^\circ\text{C}. When substrate concentration is saturating ([S]≫Km[S] \gg K_m), the enzyme exhibits a turnover number kcat=240 s−1k_{\text{cat}} = 240\text{ s}^{-1} with an active site concentration of [E]t=0.250 μM[E]_t = 0.250\text{ }\mu\text{M} in a total assay volume of 1.00 mL1.00\text{ mL}. When the temperature is maintained at 30∘C30^\circ\text{C} but the solution pH\text{pH} shifts away from the optimum of 9.59.5 to 7.57.5, reversible ionization of catalytic residues reduces the effective catalytic efficiency kcatk_{\text{cat}} by 65.0%65.0\%. Calculate the resulting maximum reaction rate Vmax⁡V_{\max} (in μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s})) at pH 7.5\text{pH } 7.5 under saturating substrate conditions.

Answer and steps

Final answer

Vmax⁡=21.0 μmol/(L⋅s)V_{\max} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

Steps

01

Identify the relationship between Vmax⁡V_{\max}, kcatk_{\text{cat}}, and [E]t[E]_t

Under saturating substrate conditions ([S]≫Km[S] \gg K_m), all active sites are occupied by substrate, and the enzyme operates at its maximum velocity (Vmax⁡V_{\max}). The maximum reaction rate is related to the turnover number (kcatk_{\text{cat}}) and total enzyme active site concentration ([E]t[E]_t) by the equation:

Vmax⁡=kcat⋅[E]tV_{\max} = k_{\text{cat}} \cdot [E]_t

02

Determine the effective turnover number at pH 7.5\text{pH } 7.5

A change in pH\text{pH} away from the enzyme's optimum alters the ionization states of crucial amino acid residues in the catalytic site, thereby reducing catalytic turnover.

The turnover number is reduced by 65.0%65.0\%, meaning that the remaining active fraction is:

100%−65.0%=35.0%=0.350100\% - 65.0\% = 35.0\% = 0.350

Calculate the new turnover number, kcat′k_{\text{cat}}':

kcat′=240 s−1⋅0.350=84.0 s−1k_{\text{cat}}' = 240\text{ s}^{-1} \cdot 0.350 = 84.0\text{ s}^{-1}

Common Pitfall: Be careful to distinguish between a reduction by 65.0%65.0\% (leaving 35.0%35.0\% activity) and a reduction to 65.0%65.0\% of the initial activity.

03

Calculate the resulting maximum velocity (Vmax⁡V_{\max})

The active site concentration is given directly as [E]t=0.250 μM=0.250 μmol/L[E]_t = 0.250\text{ }\mu\text{M} = 0.250\text{ }\mu\text{mol/L}.

Substitute kcat′k_{\text{cat}}' and [E]t[E]_t into the rate equation:

Vmax⁡=kcat′⋅[E]tV_{\max} = k_{\text{cat}}' \cdot [E]_t Vmax⁡=84.0 s−1⋅0.250 μmolL=21.0 μmolL⋅sV_{\max} = 84.0\text{ s}^{-1} \cdot 0.250\text{ }\frac{\mu\text{mol}}{\text{L}} = 21.0\text{ }\frac{\mu\text{mol}}{\text{L}\cdot\text{s}}

Therefore, the resulting maximum reaction rate at pH 7.5\text{pH } 7.5 is 21.0 μmol/(L⋅s)21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the 65.0% reduction in kcat with the remaining percentage, using 65.0% as the factor instead of subtracting it from 100%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Vmax⁡=kcat×[E]tV_{\max} = k_{\text{cat}} \times [E]_t

  2. Step 2

    kcat(pH 7.5)=240 s−1×0.650=156 s−1k_{\text{cat}}(\text{pH } 7.5) = 240\text{ s}^{-1} \times 0.650 = 156\text{ s}^{-1}

    Correct

    kcat′=240 s−1×(1−0.650)=84.0 s−1k_{\text{cat}}' = 240\text{ s}^{-1} \times (1 - 0.650) = 84.0\text{ s}^{-1}

    A reduction by 65.0%65.0\% means that 35.0%35.0\% of the catalytic turnover remains (100%−65.0%=35.0%100\% - 65.0\% = 35.0\%). Multiplying directly by 0.6500.650 calculated the lost activity rather than the remaining activity.

  3. Step 3

    Vmax⁡=156 s−1×0.250 μM=39.0 μmol/(L⋅s)V_{\max} = 156\text{ s}^{-1} \times 0.250\text{ }\mu\text{M} = 39.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Correct

    Vmax⁡=84.0 s−1×0.250 μmol/L=21.0 μmol/(L⋅s)V_{\max} = 84.0\text{ s}^{-1} \times 0.250\text{ }\mu\text{mol/L} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    You executed the multiplication and unit conversion correctly, but the result is inaccurate due to the incorrect value of kcatk_{\text{cat}} from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the saturating rate equation Vmax⁡=kcat⋅[E]tV_{\max} = k_{\text{cat}} \cdot [E]_t.

You converted and matched the concentration units of μM\mu\text{M} to μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s}) accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage Decrease vs. Remaining Fraction Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused a percent reduction ('decreased by x%x\%') with the remaining fractional activity ('reduced to x%x\%'), leading to multiplying by the fraction lost (0.6500.650) rather than the fraction retained (1−0.650=0.3501 - 0.650 = 0.350).

REASONING PATH
Your ACEpath teacher’s suggested approach
'Reduced by' vs. 'Reduced to'
  • When a quantity AA is reduced by p%p\%, the remaining value is A×(1−p100)A \times (1 - \frac{p}{100}). If it is reduced to p%p\%, the remaining value is A×p100A \times \frac{p}{100}.

  • Identify the preposition: whenever you see 'reduced by', immediately calculate the remaining percentage as 100%−p%100\% - p\% before multiplying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the percentage loss from 100%100\% to find the remaining fraction: 100%−65.0%=35.0%=0.350100\% - 65.0\% = 35.0\% = 0.350.

  2. Calculate the adjusted turnover number: kcat′=240 s−1×0.350=84.0 s−1k_{\text{cat}}' = 240\text{ s}^{-1} \times 0.350 = 84.0\text{ s}^{-1}.

  3. Substitute into the rate equation: Vmax⁡=84.0 s−1×0.250 μM=21.0 μmol/(L⋅s)V_{\max} = 84.0\text{ s}^{-1} \times 0.250\text{ }\mu\text{M} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

Final answer

Vmax⁡=21.0 μmol/(L⋅s)V_{\max} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always highlight whether an environmental change (such as pH or temperature shift) causes a reduction 'by' or 'to' a given percentage.

  • Check whether your adjusted rate reflects the intended loss: losing more than half (65%65\%) should leave less than half of the initial turnover number (<120 s−1< 120\text{ s}^{-1}).

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the concentration [E]t by multiplying it by the volume (1.00 mL) to find the moles of enzyme instead of keeping the molar concentration for calculating Vmax in μmol/(L·s).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    kcat(pH 7.5)=240 s−1×(1−0.650)=84 s−1k_{\text{cat}}(\text{pH } 7.5) = 240\text{ s}^{-1} \times (1 - 0.650) = 84\text{ s}^{-1}

  2. Step 2

    Enzyme amount=0.250 μM×0.001 L=0.000250 μmol\text{Enzyme amount} = 0.250\text{ }\mu\text{M} \times 0.001\text{ L} = 0.000250\text{ }\mu\text{mol}

    Correct

    [E]t=0.250 μM=0.250 μmol/L[E]_t = 0.250\text{ }\mu\text{M} = 0.250\text{ }\mu\text{mol}/\text{L}

    You converted the concentration into absolute moles by multiplying by the assay volume. Because reaction rate Vmax⁡V_{\max} is defined per unit volume (in μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s})), you must keep the enzyme quantity as a concentration [E]t[E]_t.

  3. Step 3

    Vmax⁡=84 s−1×0.000250 μmol=0.0210 μmol/(L⋅s)V_{\max} = 84\text{ s}^{-1} \times 0.000250\text{ }\mu\text{mol} = 0.0210\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Correct

    Vmax⁡=kcat′⋅[E]t=84.0 s−1×0.250 μmol/L=21.0 μmol/(L⋅s)V_{\max} = k_{\text{cat}}' \cdot [E]_t = 84.0\text{ s}^{-1} \times 0.250\text{ }\mu\text{mol}/\text{L} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Multiplying the turnover number by total moles rather than molar concentration resulted in an answer that is too small by a factor of 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the fractional decrease to find the adjusted turnover number kcatk_{\text{cat}}.

You recognized the foundational Michaelis-Menten relationship linking maximum velocity to turnover number and enzyme quantity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Confusion: Amount vs. Concentration

You converted the concentration of enzyme into total moles by multiplying by assay volume, even though the requested rate unit was concentration per time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing reaction velocity (a concentration change per second, μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s})) with total reaction turnover (moles converted per second, μmol/s\mu\text{mol}/\text{s}). In enzyme kinetics, Vmax⁡V_{\max} is an intensive rate property expressed as kcat[E]tk_{\text{cat}}[E]_t, where [E]t[E]_t must be a concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Target Units
  • Reaction rate (VV) has concentration units per time: M⋅s−1\text{M}\cdot\text{s}^{-1} or μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s}).

  • Ensure that the enzyme quantity substituted into Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[E]_t is an active site concentration ([E]t[E]_t in mol/L\text{mol}/\text{L} or μmol/L\mu\text{mol}/\text{L}), not total moles.

Extraneous Data Recognition
  • Assay volume and total enzyme mass are extraneous when active site molar concentration [E]t[E]_t is already provided.

  • Inspect given values before calculating: if concentration [E]t[E]_t is given and the requested answer is in concentration units, do not multiply by volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify [E]t=0.250 μM=0.250 μmol/L[E]_t = 0.250\text{ }\mu\text{M} = 0.250\text{ }\mu\text{mol}/\text{L}.

  2. Substitute kcat′=84.0 s−1k_{\text{cat}}' = 84.0\text{ s}^{-1} and [E]t=0.250 μmol/L[E]_t = 0.250\text{ }\mu\text{mol}/\text{L} into Vmax⁡=kcat′[E]tV_{\max} = k_{\text{cat}}'[E]_t.

  3. Compute Vmax⁡=84.0 s−1×0.250 μmol/L=21.0 μmol/(L⋅s)V_{\max} = 84.0\text{ s}^{-1} \times 0.250\text{ }\mu\text{mol}/\text{L} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

Final answer

Vmax⁡=21.0 μmol/(L⋅s)V_{\max} = 21.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Check the dimensional units of the requested answer before starting calculations to see whether it asks for an intensive rate (concentration/time) or extensive rate (moles/time).

  • Practice spotting distractor variables such as total assay volume or mass when active site molarity is already known.

Lock it in

Similar question

01

An alkaline phosphatase has an initial Vmax⁡=120 μmol/(L⋅min)V_{\max} = 120\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}) at its optimal pH 9.8\text{pH } 9.8. When the pH\text{pH} is lowered to 8.08.0, its maximum rate decreases by 45.0%45.0\%. What is the resulting Vmax⁡V_{\max} at pH 8.0\text{pH } 8.0?

Answer

Vmax⁡=66.0 μmol/(L⋅min)V_{\max} = 66.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}). Key steps: Remaining fraction =100%−45.0%=55.0%=0.550= 100\% - 45.0\% = 55.0\% = 0.550. New rate =120 μmol/(L⋅min)×0.550=66.0 μmol/(L⋅min)= 120\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}) \times 0.550 = 66.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}).

02

A carbonic anhydrase solution ([E]t=0.100 μM[E]_t = 0.100\text{ }\mu\text{M}) exhibits kcat=8.00×105 s−1k_{\text{cat}} = 8.00 \times 10^5\text{ s}^{-1} at 37∘C37^\circ\text{C}. Lowering the temperature to 20∘C20^\circ\text{C} reduces kcatk_{\text{cat}} by 72.0%72.0\%. Calculate the new Vmax⁡V_{\max} in μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s}) under saturating conditions.

Answer

Vmax⁡=2.24×104 μmol/(L⋅s)V_{\max} = 2.24 \times 10^4\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}). Key steps: Remaining kcat′=8.00×105 s−1×(1−0.720)=2.24×105 s−1k_{\text{cat}}' = 8.00 \times 10^5\text{ s}^{-1} \times (1 - 0.720) = 2.24 \times 10^5\text{ s}^{-1}. Then Vmax⁡=(2.24×105 s−1)(0.100 μM)=22400 μM/s=2.24×104 μmol/(L⋅s)V_{\max} = (2.24 \times 10^5\text{ s}^{-1})(0.100\text{ }\mu\text{M}) = 22400\text{ }\mu\text{M/s} = 2.24 \times 10^4\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

03

In an enzyme assay, shifting pH\text{pH} from 7.47.4 to 6.06.0 alters the protonation of an active-site histidine. If the total enzyme concentration is [E]t=0.500 μM[E]_t = 0.500\text{ }\mu\text{M} and Vmax⁡V_{\max} drops from 150 μmol/(L⋅s)150\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) to 45.0 μmol/(L⋅s)45.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}), by what percentage was the turnover number kcatk_{\text{cat}} reduced?

Answer

70.0%70.0\%. Key steps: Since Vmax⁡∝kcatV_{\max} \propto k_{\text{cat}}, the remaining fraction is 45.0150=0.300=30.0%\frac{45.0}{150} = 0.300 = 30.0\%. The percentage reduction is 100%−30.0%=70.0%100\% - 30.0\% = 70.0\%.

Loading workspace…