Resources

Consider the condensation of an extremely large macromolecule where the number of identical monomers, nn, approaches infinity (n→∞n \to \infty). Let MmM_m be the molecular mass of a single free monomer, and MwM_w be the molecular mass of water (18.02 Da18.02\text{ Da}). (a) Write a general algebraic expression for the average mass contribution per monomer residue, Mˉr(n)\bar{M}_r(n), within a linear polymer chain of length nn. (b) Evaluate lim⁡n→∞Mˉr(n)\lim_{n \to \infty} \bar{M}_r(n) for a poly-alanine chain where the free alanine monomer mass is Mm=89.09 DaM_m = 89.09\text{ Da}. (c) By how many Da\text{Da} does the monomer residue mass in an infinite polymer differ from that of a tiny dipeptide (n=2n = 2)?

Answer and steps

Final answer

(a) Mˉr(n)=Mm−n−1nMw\bar{M}_r(n) = M_m - \frac{n-1}{n}M_w; (b) lim⁡n→∞Mˉr(n)=71.07 Da\lim_{n \to \infty} \bar{M}_r(n) = 71.07\text{ Da}; (c) 9.01 Da9.01\text{ Da} lower in the infinite polymer than in the dipeptide (where Mˉr(2)=80.08 Da\bar{M}_r(2) = 80.08\text{ Da})

Steps

Part (a): General Expression for the Average Residue Mass

  1. Understand polymer formation via condensation synthesis: A linear biological polymer (such as a polypeptide or polysaccharide) is formed by joining nn monomers end-to-end through condensation (dehydration synthesis) reactions.

    • Each bond formed between two adjacent monomers eliminates one molecule of water (HX2O\ce{H2O}, with mass MwM_w).
    • A chain of nn monomers contains n−1n - 1 covalent linkages, which means n−1n - 1 water molecules are released during synthesis.
  2. Calculate the total polymer mass: The total mass of the resulting linear polymer, Mpolymer(n)M_{\text{polymer}}(n), is the mass of all nn initial free monomers minus the mass of the released water molecules: Mpolymer(n)=nMm−(n−1)MwM_{\text{polymer}}(n) = n M_m - (n - 1)M_w
  3. Determine the average mass per residue: Dividing the total polymer mass by the number of monomer units nn yields the average mass contribution per residue, Mˉr(n)\bar{M}_r(n): Mˉr(n)=nMm−(n−1)Mwn=Mm−n−1nMw\bar{M}_r(n) = \frac{n M_m - (n - 1)M_w}{n} = M_m - \frac{n - 1}{n}M_w

Part (b): Evaluating the Asymptotic Mass for Poly-Alanine

  1. Take the limit as chain length n→∞n \to \infty: As the number of units approaches infinity, the fraction n−1n\frac{n - 1}{n} approaches 11: lim⁡n→∞n−1n=lim⁡n→∞(1−1n)=1\lim_{n \to \infty} \frac{n - 1}{n} = \lim_{n \to \infty} \left(1 - \frac{1}{n}\right) = 1 Therefore: lim⁡n→∞Mˉr(n)=Mm−Mw\lim_{n \to \infty} \bar{M}_r(n) = M_m - M_w
  2. Substitute the given values for alanine:

    • Free alanine monomer mass: Mm=89.09 DaM_m = 89.09\text{ Da}
    • Water mass: Mw=18.02 DaM_w = 18.02\text{ Da} lim⁡n→∞Mˉr(n)=89.09 Da−18.02 Da=71.07 Da\lim_{n \to \infty} \bar{M}_r(n) = 89.09\text{ Da} - 18.02\text{ Da} = 71.07\text{ Da}

    Biological note: In biochemistry, 71.07 Da71.07\text{ Da} is widely tabulated as the standard alanine residue mass in proteins because typical protein chains are long enough that the end groups (the extra terminal −H\ce{-H} and −OH\ce{-OH} corresponding to the remaining water molecule across the whole chain) have a negligible effect per residue.


Part (c): Comparison with a Dipeptide (n=2n = 2)

  1. Calculate the average residue mass of a dipeptide: For n=2n = 2, only 2−1=12 - 1 = 1 peptide bond is formed, releasing one water molecule across two residues: Mˉr(2)=Mm−2−12Mw=Mm−12Mw\bar{M}_r(2) = M_m - \frac{2 - 1}{2}M_w = M_m - \frac{1}{2}M_w Mˉr(2)=89.09 Da−9.01 Da=80.08 Da\bar{M}_r(2) = 89.09\text{ Da} - 9.01\text{ Da} = 80.08\text{ Da}
  2. Find the difference between the infinite chain and the dipeptide: Mˉr(2)−lim⁡n→∞Mˉr(n)=(Mm−12Mw)−(Mm−Mw)=12Mw\bar{M}_r(2) - \lim_{n \to \infty} \bar{M}_r(n) = \left(M_m - \frac{1}{2}M_w\right) - (M_m - M_w) = \frac{1}{2}M_w 12(18.02 Da)=9.01 Da\frac{1}{2}(18.02\text{ Da}) = 9.01\text{ Da}

The average monomer residue mass in the infinite polymer is 9.01 Da9.01\text{ Da} lower than in the dipeptide (where Mˉr(2)=80.08 Da\bar{M}_r(2) = 80.08\text{ Da}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that exactly n water molecules are released for n monomers instead of n - 1 condensation bonds, omitting the end groups.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total mass\text{Total mass} = n M_m - n M_w   ⟹  \implies M_r(n) = nMm−nMwn\frac{n M_m - n M_w}{n} = M_m - M_w

    Correct

    M_{polymer\text{polymer}}(n) = n M_m - (n - 1)M_w   ⟹  \implies Mˉ\bar{M}_r(n) = M_m - n−1n\frac{n - 1}{n}M_w

    In a linear polymer of nn monomers, there are only n−1n - 1 covalent linkages formed between adjacent units. Therefore, only n−1n - 1 water molecules are eliminated during condensation synthesis, not nn.

  2. Step 2

    $\lim_{n →\to ∞\infty}$ M_r(n) = M_m - M_w = 89.09 - 18.02 = 71.07\text{ Da}_

    Correct

    $\lim_{n →\to ∞\infty} \bar{M}_r(n) = \\lim_{n \to \infty} \left(M_m - \frac{n - 1}{n}M_w\right)=Mm−Mw=71.07 = M_m - M_w = 71.07\text{ Da}$_

    Your numerical evaluation for the infinite limit is correct because lim⁡n→∞n−1n=1\lim_{n \to \infty} \frac{n - 1}{n} = 1, which makes the terminal groups negligible as n→∞n \to \infty. However, your formula missed the limit step because it treated the residue mass as independent of nn.

  3. Step 3

    For \text{For } n = 2: M_r(2) = M_m - M_w = 71.07 Da\text{ Da}   ⟹  \implies Difference\text{Difference} = 71.07 - 71.07 = 0 Da\text{ Da}

    Correct

    Mˉ\bar{M}r(2) = M_m - 12\frac{1}{2}M_w = 89.09 - 9.01 = 80.08 Da\text{ Da}   ⟹  \implies Difference\text{Difference} = 80.08 - 71.07 = 9.01 Da\text{ Da}

    Because of the missing n−1n - 1 factor from part (a), your dipeptide calculation lost two water molecules instead of one. Joining two alanine molecules releases only one water molecule across two residues, giving Mˉr(2)=80.08 Da\bar{M}_r(2) = 80.08\text{ Da}, which is 9.01 Da9.01\text{ Da} heavier than in an infinite chain.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the masses of free alanine and water.

You correctly arrived at 71.07 Da71.07\text{ Da} as the asymptotic residue mass for an infinitely long poly-alanine chain.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear condensation linkage count error

You set the number of eliminated water molecules equal to the number of monomers nn instead of the number of inter-monomer bonds n−1n - 1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the 'fencepost' principle in linear polymers: connecting nn distinct units end-to-end creates n−1n - 1 linkage bonds, leaving intact terminal functional groups (−H-\ce{H} and −OH-\ce{OH}) that constitute an unreleased water molecule across the entire chain.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count linkages versus units
  • A linear unbranched polymer containing nn monomer units contains exactly n−1n - 1 covalent linkages.

  • Always subtract (n−1)Mw(n - 1) M_w from nMmn M_m when calculating the total mass of a linear condensation polymer.

Recognize terminal end groups
  • A linear polymer retains an intact −H-\ce{H} at one end and −OH-\ce{OH} at the other, representing one extra equivalent of HX2O\ce{H2O} relative to a cyclic polymer.

  • Check small chain lengths such as n=1n = 1 (no water lost, mass =Mm= M_m) and n=2n = 2 (one water lost) to confirm your formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the total polymer mass: Mpolymer(n)=nMm−(n−1)MwM_{\text{polymer}}(n) = n M_m - (n - 1)M_w.

  2. Divide by nn to find the average residue mass: Mˉr(n)=nMm−(n−1)Mwn=Mm−n−1nMw\bar{M}_r(n) = \frac{n M_m - (n - 1)M_w}{n} = M_m - \frac{n - 1}{n}M_w.

  3. Take the limit as n→∞n \to \infty: since n−1n→1\frac{n - 1}{n} \to 1, lim⁡n→∞Mˉr(n)=Mm−Mw=89.09−18.02=71.07 Da\lim_{n \to \infty} \bar{M}_r(n) = M_m - M_w = 89.09 - 18.02 = 71.07\text{ Da}.

  4. Substitute n=2n = 2 for the dipeptide: Mˉr(2)=89.09−12(18.02)=80.08 Da\bar{M}_r(2) = 89.09 - \frac{1}{2}(18.02) = 80.08\text{ Da}.

  5. Subtract the asymptotic value from the dipeptide residue mass: 80.08 Da−71.07 Da=9.01 Da80.08\text{ Da} - 71.07\text{ Da} = 9.01\text{ Da}.

Final answer

(a) Mˉr(n)=Mm−n−1nMw\bar{M}_r(n) = M_m - \frac{n - 1}{n}M_w; (b) 71.07 Da71.07\text{ Da}; (c) 9.01 Da9.01\text{ Da} lower in the infinite polymer than in the dipeptide

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up mass equations for small oligomers (n=2,3,4n = 2, 3, 4) to build intuition for the n−1n - 1 water loss pattern.

  • Compare linear polymers with cyclic polymers to clearly distinguish when nn water molecules are lost versus n−1n - 1.

OverviewACEpath Teacher's Diagnosis

02 The student compares total molecular masses rather than the average mass contribution per monomer residue in part (c).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M(n)=n⋅Mm−(n−1)⋅Mw  ⟹  Mr(n)=Mm−(n−1n)⋅MwM(n) = n \cdot M_m - (n-1) \cdot M_w \implies M_r(n) = M_m - \left(\frac{n-1}{n}\right) \cdot M_w

  2. Step 2

    lim⁡n→∞Mr(n)=Mm−Mw=89.09−18.02=71.07 Da\lim_{n \to \infty} M_r(n) = M_m - M_w = 89.09 - 18.02 = 71.07\text{ Da}

  3. Step 3

    Total mass of dipeptide=2⋅Mm−Mw=160.16 Da  ⟹  Difference=160.16−71.07=89.09 Da\text{Total mass of dipeptide} = 2 \cdot M_m - M_w = 160.16\text{ Da} \implies \text{Difference} = 160.16 - 71.07 = 89.09\text{ Da}

    Correct

    Mˉr(2)=Mm−12Mw=80.08 Da  ⟹  Mˉr(2)−Mˉr(∞)=80.08−71.07=9.01 Da\bar{M}_r(2) = M_m - \frac{1}{2}M_w = 80.08\text{ Da} \implies \bar{M}_r(2) - \bar{M}_r(\infty) = 80.08 - 71.07 = 9.01\text{ Da}

    You calculated the total mass of the entire dipeptide (160.16 Da160.16\text{ Da}) instead of its average mass contribution per residue (Mˉr(2)=160.16 Da2=80.08 Da\bar{M}_r(2) = \frac{160.16\text{ Da}}{2} = 80.08\text{ Da}). Comparing total mass to per-residue mass compares two different quantities.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up the total polymer mass correctly by subtracting (n−1)(n-1) water molecules from nn monomer masses.

You divided the total mass by nn to obtain the correct formula for Mˉr(n)\bar{M}_r(n).

You accurately took the limit as n→∞n \to \infty and calculated the numerical value for poly-alanine.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit/Quantity Mismatch (Total Polymer Mass vs. Residue Mass)

You found the total mass of the dipeptide rather than dividing by n=2n = 2 to find the average mass per residue.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total mass of the oligomer as equivalent to its monomer residue mass, overlooking that residue mass represents an intensive quantity (mass per monomer unit) rather than an extensive quantity (total molecular weight).

REASONING PATH
Your ACEpath teacher’s suggested approach
Intensive vs. Extensive Mass Quantities
  • Total molecular weight M(n)M(n) scales with chain length nn, whereas average residue mass Mˉr(n)=M(n)n\bar{M}_r(n) = \frac{M(n)}{n} normalizes the mass to a single monomer unit.

  • Whenever a question asks to compare residue masses, evaluate Mˉr(n)\bar{M}_r(n) for both systems or divide total mass by nn before computing the difference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the average residue mass of the dipeptide: Mˉr(2)=160.16 Da2=80.08 Da\bar{M}_r(2) = \frac{160.16\text{ Da}}{2} = 80.08\text{ Da} (or using the formula, Mˉr(2)=89.09−12(18.02)=80.08 Da\bar{M}_r(2) = 89.09 - \frac{1}{2}(18.02) = 80.08\text{ Da}).

  2. Subtract the infinite polymer residue mass from the dipeptide residue mass: 80.08 Da−71.07 Da=9.01 Da80.08\text{ Da} - 71.07\text{ Da} = 9.01\text{ Da}.

Final answer

9.01 Da9.01\text{ Da} lower in the infinite polymer than in the dipeptide

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check question phrasing to distinguish whether it asks for total molecular weight (MM) or residue mass (Mˉr\bar{M}_r).

  • Notice the symmetry: the difference in residue mass between n=2n=2 and n=∞n=\infty is simply (1−12)Mw=12Mw=9.01 Da\left(1 - \frac{1}{2}\right)M_w = \frac{1}{2}M_w = 9.01\text{ Da}.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts water mass from each monomer individually in the dipeptide, effectively removing 2 waters instead of 1 water molecule.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M(n)=n⋅Mm−(n−1)⋅Mw  ⟹  Mˉr(n)=Mm−(n−1n)MwM(n) = n \cdot M_m - (n-1) \cdot M_w \implies \bar{M}_r(n) = M_m - \left(\frac{n-1}{n}\right) M_w

  2. Step 2

    lim⁡n→∞Mˉr(n)=Mm−Mw=89.09−18.02=71.07 Da\lim_{n \to \infty} \bar{M}_r(n) = M_m - M_w = 89.09 - 18.02 = 71.07\text{ Da}

  3. Step 3

    For \text{For } n=2, water lost\text{, water lost} = 2 ⋅\cdot M_w = 36.04 Da\text{ Da}   ⟹  \implies Total mass\text{Total mass} = 2 ⋅\cdot 89.09 - 36.04 = 142.14 Da\text{ Da}

    Correct

    Water lost\text{Water lost} = (2 - 1)M_w = 18.02 Da\text{ Da}   ⟹  \implies Total mass\text{Total mass} = 2(89.09) - 18.02 = 160.16 Da\text{ Da}

    You multiplied MwM_w by n=2n = 2 instead of n−1=1n - 1 = 1. Forming a dipeptide requires only 1 condensation linkage between the two monomers, releasing exactly 1 water molecule.

  4. Step 4

    Mˉ\bar{M}r(2) = 142.142\frac{142.14}{2} = 71.07 Da\text{ Da}   ⟹  \implies Difference\text{Difference} = 71.07 - 71.07 = 0 Da\text{ Da}

    Correct

    Mˉ\bar{M}r(2) = 160.162\frac{160.16}{2} = 80.08 Da\text{ Da}   ⟹  \implies Difference\text{Difference} = 80.08 - 71.07 = 9.01 Da\text{ Da}

    Your arithmetic was carried out consistently with your previous line, but the result is incorrect due to the bond-counting error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the general residue formula using the (n−1)(n-1) water elimination rule.

You correctly evaluated the limit as n→∞n \to \infty for poly-alanine.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Off-by-one condensation bond count

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the dipeptide as losing 1 water molecule per monomer rather than 1 water molecule per bond formed between adjacent monomers.

REASONING PATH
Your ACEpath teacher’s suggested approach
Counting Water Loss in Condensation Reactions
  • In any linear unbranched polymer of nn monomers, exactly n−1n - 1 condensation bonds form, releasing (n−1)(n - 1) water molecules.

  • Always check that the number of eliminated waters is n−1n - 1, especially for small chains such as dimers (n=2n = 2) where n−1=1n - 1 = 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the number of condensation bonds for n=2n = 2: n−1=2−1=1n - 1 = 2 - 1 = 1 bond.

  2. Calculate the water mass eliminated: 1×Mw=18.02 Da1 \times M_w = 18.02\text{ Da}.

  3. Find total dipeptide mass: M(2)=2(89.09 Da)−18.02 Da=160.16 DaM(2) = 2(89.09\text{ Da}) - 18.02\text{ Da} = 160.16\text{ Da}.

  4. Compute the average residue mass: Mˉr(2)=160.16 Da2=80.08 Da\bar{M}_r(2) = \frac{160.16\text{ Da}}{2} = 80.08\text{ Da}.

  5. Calculate the difference: Mˉr(2)−Mˉr(∞)=80.08 Da−71.07 Da=9.01 Da\bar{M}_r(2) - \bar{M}_r(\infty) = 80.08\text{ Da} - 71.07\text{ Da} = 9.01\text{ Da}.

Final answer

9.01 Da9.01\text{ Da} lower in the infinite polymer than in the dipeptide (where Mˉr(2)=80.08 Da\bar{M}_r(2) = 80.08\text{ Da})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between monomer count nn and linkage count n−1n - 1 in linear dehydration reactions.

  • Practice calculating molecular mass and residue mass for small oligomers like tripeptides and tetrapeptides.

Lock it in

Similar question

01

A linear tripeptide (n=3n = 3) is synthesized from three identical amino acid monomers, each having a molecular mass of 110.00 Da110.00\text{ Da}. If the molecular mass of water is 18.00 Da18.00\text{ Da}, what is the total molecular mass of the tripeptide, and what is the average mass per residue?

Answer

Total mass =3(110.00)−(3−1)(18.00)=330.00−36.00=294.00 Da= 3(110.00) - (3 - 1)(18.00) = 330.00 - 36.00 = 294.00\text{ Da}. Average mass per residue =294.003=98.00 Da= \frac{294.00}{3} = 98.00\text{ Da}.

02

Glucose has a molecular mass of 180.16 Da180.16\text{ Da}. An unbranched linear glucan polymer of n=100n = 100 glucose residues is synthesized via dehydration synthesis. Calculate the average mass contribution per glucosyl residue in this specific polymer chain, using Mw=18.02 DaM_w = 18.02\text{ Da}.

Answer

Formula: Mˉr(100)=Mm−99100Mw=180.16−0.99(18.02)=180.16−17.8398=162.32 Da\bar{M}_r(100) = M_m - \frac{99}{100}M_w = 180.16 - 0.99(18.02) = 180.16 - 17.8398 = 162.32\text{ Da}.

03

Compare a linear polymer of nn monomers to a cyclic polymer of nn identical monomers, each with monomer mass MmM_m and water mass MwM_w. Write the exact expression for the average residue mass Mˉr\bar{M}_r of the cyclic polymer and state whether it depends on nn.

Answer

Closing the chain into a ring requires forming an additional bond, eliminating nn water molecules in total. Total cyclic mass =nMm−nMw= n M_m - n M_w, so Mˉr,cyclic=Mm−Mw\bar{M}_{r,\text{cyclic}} = M_m - M_w. It is completely independent of nn.

Loading workspace…