Resources

A student hypothesizes that if both the proofreading 3′→5′3' \to 5' exonuclease activity of DNA polymerase III and the post-replicative mismatch repair (MMR) system are functional, the initial base selection error rate determines the final mutation frequency. The intrinsic misincorporation rate of DNA polymerase during initial 5′→3′5' \to 3' polymerization is 1.0×10−51.0 \times 10^{-5} errors per base pair. Proofreading lowers the uncorrected error rate by a factor of 2.0×1022.0 \times 10^2, and post-replicative mismatch repair subsequently lowers the remaining errors by a factor of 1.0×1021.0 \times 10^2. Calculate the overall net replication fidelity (final error rate expressed as mutations per base pair replicated) and state whether the final fidelity is governed exclusively by initial base selection.

Answer and steps

Final answer

5.0×10−10 errors/base pair5.0 \times 10^{-10}\text{ errors/base pair}; No, final fidelity depends on the multiplicative product of initial base selection, proofreading, and mismatch repair.

Steps

01

Understanding Multi-Tiered DNA Replication Fidelity

High-fidelity DNA replication in living organisms is achieved through three successive, independent mechanisms acting in series:

  1. Initial Base Selection: The intrinsic accuracy of the active site of DNA polymerase during 5′→3′5' \to 3' synthesis.
  2. 3′→5′3' \to 5' Exonucleolytic Proofreading: Immediate removal of an incorrectly paired nucleotide by the polymerase's proofreading exonuclease domain before further elongation proceeds.
  3. Post-Replicative Mismatch Repair (MMR): Detection and excision of mismatched base pairs that escaped proofreading, carried out after the replication fork passes.

Because each mechanism acts sequentially on the errors left behind by the preceding step, their error-reduction factors multiply.


02

Calculating the Net Error Rate

  1. Error Rate after Initial Polymerization: Error1=1.0×10−5 errors per base pair\text{Error}_1 = 1.0 \times 10^{-5}\text{ errors per base pair}
  2. Error Rate after 3′→5′3' \to 5' Proofreading: Proofreading reduces the uncorrected error rate by a factor of 2.0×1022.0 \times 10^2: Error2=Error12.0×102=1.0×10−52.0×102=5.0×10−8 errors per base pair\text{Error}_2 = \frac{\text{Error}_1}{2.0 \times 10^2} = \frac{1.0 \times 10^{-5}}{2.0 \times 10^2} = 5.0 \times 10^{-8}\text{ errors per base pair}
  3. Final Error Rate after Mismatch Repair (MMR): Post-replicative mismatch repair further reduces the remaining errors by a factor of 1.0×1021.0 \times 10^2: Errorfinal=Error21.0×102=5.0×10−81.0×102=5.0×10−10 errors per base pair\text{Error}_{\text{final}} = \frac{\text{Error}_2}{1.0 \times 10^2} = \frac{5.0 \times 10^{-8}}{1.0 \times 10^2} = 5.0 \times 10^{-10}\text{ errors per base pair}

Alternatively, combining the reduction factors into a single expression: Errorfinal=1.0×10−5(2.0×102)⋅(1.0×102)=1.0×10−52.0×104=5.0×10−10 errors per base pair\text{Error}_{\text{final}} = \frac{1.0 \times 10^{-5}}{(2.0 \times 10^2) \cdot (1.0 \times 10^2)} = \frac{1.0 \times 10^{-5}}{2.0 \times 10^4} = 5.0 \times 10^{-10}\text{ errors per base pair}


03

Evaluating the Student's Hypothesis

  • Hypothesis Evaluation: No, the final fidelity is not governed exclusively by initial base selection.
  • Explanation: Net replication fidelity is determined by the cooperative, multiplicative combination of all three fidelity steps: Final Error Rate=Initial Error RateProofreading Factor⋅MMR Factor\text{Final Error Rate} = \frac{\text{Initial Error Rate}}{\text{Proofreading Factor} \cdot \text{MMR Factor}} If proofreading or mismatch repair is defective or inactivated, the mutation frequency increases by hundreds to thousands of times, even when initial base selection operates normally.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student adds rather than multiplies the reduction factors of proofreading and mismatch repair in the denominator, resulting in an incorrect error rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Reduction factor=2.0×102+1.0×102=3.0×102\text{Reduction factor} = 2.0 \times 10^2 + 1.0 \times 10^2 = 3.0 \times 10^2

    Correct

    Total reduction factor=(2.0×102)×(1.0×102)=2.0×104\text{Total reduction factor} = (2.0 \times 10^2) \times (1.0 \times 10^2) = 2.0 \times 10^4

    You added the two reduction factors instead of multiplying them. Sequential fidelity mechanisms act successively on remaining errors, so their fold-reduction factors multiply.

  2. Step 2

    Net error rate=1.0×10−53.0×102=3.3×10−8 mutations per base pair\text{Net error rate} = \frac{1.0 \times 10^{-5}}{3.0 \times 10^2} = 3.3 \times 10^{-8}\text{ mutations per base pair}

    Correct

    Net error rate=1.0×10−52.0×104=5.0×10−10 mutations per base pair\text{Net error rate} = \frac{1.0 \times 10^{-5}}{2.0 \times 10^4} = 5.0 \times 10^{-10}\text{ mutations per base pair}

    You correctly set up the quotient of the initial error rate divided by your total reduction factor, but the numerical result was affected by the additive error from Step 1.

  3. Step 3

    No, final fidelity is governed by initial base selection along with proofreading and mismatch repair.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all three successive fidelity mechanisms involved in DNA replication.

You accurately evaluated the hypothesis by stating that initial base selection alone does not determine final fidelity.

You correctly recognized that error reduction factors belong in the denominator when calculating net mutation rates.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Additive versus Multiplicative Combination of Sequential Rates

You treated successive independent reduction factors as additive terms rather than sequential multiplicative factors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A misconception between parallel additive contributions and sequential conditional filters. In multi-step biological proofreading, each subsequent mechanism acts only on the fraction of errors that escaped the previous tier, meaning the overall survival probability of an error is the product of the individual escape probabilities.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recognizing Sequential Filtering
  • When independent quality-control mechanisms act in series, their error-reduction factors multiply: Total Factor=f1×f2×⋯×fn\text{Total Factor} = f_1 \times f_2 \times \dots \times f_n.

  • Always multiply the fold-reduction factors when each repair mechanism processes the uncorrected output of the previous step.

Verifying Magnitude of Cumulative Improvement
  • Two sequential hundred-fold reductions (10210^2 each) yield a ten-thousand-fold (10410^4) reduction, not a two-hundred-fold (2×1022 \times 10^2) reduction.

  • Check that the exponents of base 10 add together during multiplication: 10a×10b=10a+b10^a \times 10^b = 10^{a+b}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the combined reduction factor by multiplying the two sequential factors: Total factor=(2.0×102)×(1.0×102)=2.0×104\text{Total factor} = (2.0 \times 10^2) \times (1.0 \times 10^2) = 2.0 \times 10^4.

  2. Divide the initial polymerase misincorporation rate by the combined reduction factor: Net error rate=1.0×10−52.0×104=5.0×10−10 errors per base pair\text{Net error rate} = \frac{1.0 \times 10^{-5}}{2.0 \times 10^4} = 5.0 \times 10^{-10}\text{ errors per base pair}.

Final answer

5.0×10−10 errors/base pair5.0 \times 10^{-10}\text{ errors/base pair}; No, final fidelity depends on the multiplicative product of initial base selection, proofreading, and mismatch repair.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting sequential biological filtration steps into product expressions rather than sums.

  • Review how probability of consecutive independent events translates to multiplying survival fractions (Perror=P1×P2×P3P_{\text{error}} = P_1 \times P_2 \times P_3).

  • Double-check that scientific-notation multiplication rules (10m×10n=10m+n10^m \times 10^n = 10^{m+n}) are applied when combining multi-tier repair efficiencies.

OverviewACEpath Teacher's Diagnosis

02 A student multiplies the initial error rate by the reduction factors instead of dividing by them, resulting in an absurdly large error rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Net error rate=(1.0×10−5)×(2.0×102)×(1.0×102)  ⟹  Net error rate=2.0×10−1 mutations per base pair.\text{Net error rate} = (1.0 \times 10^{-5}) \times (2.0 \times 10^2) \times (1.0 \times 10^2) \implies \text{Net error rate} = 2.0 \times 10^{-1}\text{ mutations per base pair.}

    Correct

    Net error rate=1.0×10−5(2.0×102)×(1.0×102)=5.0×10−10 errors per base pair\text{Net error rate} = \frac{1.0 \times 10^{-5}}{(2.0 \times 10^2) \times (1.0 \times 10^2)} = 5.0 \times 10^{-10}\text{ errors per base pair}

    When proofreading and mismatch repair lower an error rate by a given factor, you divide by that factor rather than multiplying. Multiplying led to an error rate of 0.20.2, which would mean one mutation every five base pairs.

  2. Step 2

    No, final fidelity depends on initial selection, proofreading, and mismatch repair together.\text{No, final fidelity depends on initial selection, proofreading, and mismatch repair together.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the hypothesis by stating that final fidelity depends cooperatively on initial selection, proofreading, and mismatch repair.

You correctly carried out scientific notation arithmetic for the operations you wrote down.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Operation with Reduction Factor

You multiplied the initial error rate by the reduction factors instead of dividing by them.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating 'lowers by a factor of NN' with direct multiplication, rather than recognizing that repair mechanisms reduce error frequency through division (or multiplication by 1N\frac{1}{N}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting 'Reduces by a Factor of'
  • If a mechanism reduces an error rate by a factor of FF, the new error rate is New Rate=Initial RateF\text{New Rate} = \frac{\text{Initial Rate}}{F}.

  • Divide the initial rate by each successive reduction factor, or multiply by their reciprocals.

Biological Sanity Check on Error Rates
  • DNA replication in living cells is exceptionally accurate, with final error rates typically around 10−910^{-9} to 10−1010^{-10} errors per base pair.

  • Check that your final error rate is significantly smaller than the initial error rate (10−510^{-5}). An answer of 10−110^{-1} indicates that 20%20\% of all replicated bases are mutant, which is incompatible with life.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Error after proofreading=1.0×10−52.0×102=5.0×10−8 errors/bp\text{Error after proofreading} = \frac{1.0 \times 10^{-5}}{2.0 \times 10^2} = 5.0 \times 10^{-8}\text{ errors/bp}

  2. Error after MMR=5.0×10−81.0×102=5.0×10−10 errors/bp\text{Error after MMR} = \frac{5.0 \times 10^{-8}}{1.0 \times 10^2} = 5.0 \times 10^{-10}\text{ errors/bp}

Final answer

5.0×10−10 errors/base pair5.0 \times 10^{-10}\text{ errors/base pair}; No, final fidelity is not governed exclusively by initial base selection.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice translating verbal rate-change phrases (such as 'lowers by a factor of XX' vs. 'improves error frequency to XX') into clear division or reciprocal expressions.

  • Always perform a quick reality check on biological rates: each repair step must make the genome more accurate, driving the error rate down toward 10−1010^{-10}.

OverviewACEpath Teacher's Diagnosis

03 A student considers only the proofreading mechanism and omits post-replicative mismatch repair when computing final net error rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Net error rate=1.0×10−52.0×102  ⟹  Net error rate=5.0×10−8 mutations per base pair\text{Net error rate} = \frac{1.0 \times 10^{-5}}{2.0 \times 10^2} \implies \text{Net error rate} = 5.0 \times 10^{-8}\text{ mutations per base pair}

    Correct

    Net error rate=1.0×10−5(2.0×102)(1.0×102)=5.0×10−10 errors per base pair\text{Net error rate} = \frac{1.0 \times 10^{-5}}{(2.0 \times 10^2)(1.0 \times 10^2)} = 5.0 \times 10^{-10}\text{ errors per base pair}

    You correctly accounted for the 2.0×1022.0 \times 10^2 error reduction provided by 3′→5′3' \to 5' proofreading, but you did not divide by the additional factor of 1.0×1021.0 \times 10^2 from post-replicative mismatch repair.

  2. Step 2

    No, proofreading also contributes to final fidelity in addition to initial base selection.\text{No, proofreading also contributes to final fidelity in addition to initial base selection.}

    Correct

    No, final fidelity depends multiplicatively on initial base selection, proofreading, and mismatch repair.\text{No, final fidelity depends multiplicatively on initial base selection, proofreading, and mismatch repair.}

    You correctly recognized that initial base selection is not the sole determinant, but your explanation left out the mismatch repair system, which acts in series after proofreading.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that proofreading lowers the initial polymerase misincorporation rate.

You performed the division and scientific notation arithmetic accurately for the proofreading step.

You correctly concluded that final fidelity is not determined solely by initial base selection.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of sequential repair mechanism

None

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You stopped after calculating the error rate following the second tier of fidelity (proofreading), forgetting that post-replicative mismatch repair functions as a third consecutive filter that further reduces replication errors.

REASONING PATH
Your ACEpath teacher’s suggested approach
Three-tier fidelity model
  • Overall replication fidelity is the product of three sequential steps: initial nucleotide selectivity, 3′→5′3' \to 5' proofreading, and post-replicative mismatch repair.

  • When computing net error rate, verify that every active fidelity mechanism mentioned in the prompt is included in the denominator as a reduction factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Error after proofreading=5.0×10−8 errors per base pair\text{Error after proofreading} = 5.0 \times 10^{-8}\text{ errors per base pair}

  2. Final error rate=5.0×10−81.0×102=5.0×10−10 errors per base pair\text{Final error rate} = \frac{5.0 \times 10^{-8}}{1.0 \times 10^2} = 5.0 \times 10^{-10}\text{ errors per base pair}

  3. Conclude that final replication fidelity requires the concerted action of initial base selection, proofreading, and mismatch repair.

Final answer

5.0×10−10 errors per base pair5.0 \times 10^{-10}\text{ errors per base pair}; No, final fidelity is governed by the sequential combination of initial base selection, proofreading, and mismatch repair.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the three successive tiers that ensure DNA replication fidelity: base selection, proofreading, and mismatch repair.

  • Practice multi-step reduction problems where independent mechanisms act sequentially on the remaining error pool.

Lock it in

Similar question

01

A viral RNA-dependent RNA polymerase has an initial error rate of 2.0×10−42.0 \times 10^{-4} errors per nucleotide. An accessory proofreading exonuclease reduces errors by a factor of 5.0×1015.0 \times 10^1. If this virus lacks post-replicative mismatch repair, calculate the final error rate.

Answer

4.0×10−6 errors per nucleotide4.0 \times 10^{-6}\text{ errors per nucleotide}. Key step: Divide initial error rate by the single proofreading reduction factor: 2.0×10−45.0×101=4.0×10−6\frac{2.0 \times 10^{-4}}{5.0 \times 10^1} = 4.0 \times 10^{-6}.

02

In a mutant bacterial strain, the 3′→5′3' \to 5' proofreading activity of DNA polymerase is completely inactivated, but initial base selection (error rate 1.0×10−51.0 \times 10^{-5}) and post-replicative mismatch repair (reduction factor 1.0×1021.0 \times 10^2) remain fully functional. Calculate the net error rate of this mutant strain and compare it to the wild-type rate (5.0×10−105.0 \times 10^{-10}).

Answer

1.0×10−7 errors per base pair1.0 \times 10^{-7}\text{ errors per base pair}. Key step: Error rate=1.0×10−51.0×102=1.0×10−7\text{Error rate} = \frac{1.0 \times 10^{-5}}{1.0 \times 10^2} = 1.0 \times 10^{-7}. This rate is 200200 times higher than the wild-type rate, demonstrating the critical contribution of proofreading.

03

A eukaryotic cell replicates DNA with an initial base-selection accuracy of 1 error in 10510^5 bases. 3′→5′3' \to 5' proofreading improves fidelity by a factor of 10210^2, post-replicative mismatch repair improves fidelity by a factor of 10210^2, and base excision repair of spontaneous deamination prior to the next cycle further improves overall genome fidelity by a factor of 2.02.0. Calculate the final mutation frequency per base pair across these four serial processes.

Answer

2.5×10−10 errors per base pair2.5 \times 10^{-10}\text{ errors per base pair}. Key step: Total reduction factor =102×102×2.0=2.0×104= 10^2 \times 10^2 \times 2.0 = 2.0 \times 10^4. Net error rate =1.0×10−52.0×104=5.0×10−10= \frac{1.0 \times 10^{-5}}{2.0 \times 10^4} = 5.0 \times 10^{-10} with proofreading and MMR, divided further by 2.02.0 yields 2.5×10−102.5 \times 10^{-10}.

Loading workspace…