Resources

In a biochemistry laboratory experiment, students determine the kinetic parameters of mushroom tyrosinase using a spectrophotometer at λ=475 nm\lambda = 475\text{ nm} (path length b=1.00 cmb = 1.00\text{ cm}, product dopachrome molar absorptivity ϵ=3700 L/(mol⋅cm)\epsilon = 3700\text{ L}/(\text{mol}\cdot\text{cm})). By constructing a Lineweaver-Burk double-reciprocal plot of 1v0 (min⋅Lμmol)\frac{1}{v_0}\text{ }\left(\frac{\text{min}\cdot\text{L}}{\mu\text{mol}}\right) versus 1[S] (mM−1)\frac{1}{[S]}\text{ }\left(\text{mM}^{-1}\right), the linear regression line yields the equation: y=0.0450x+0.0150y = 0.0450x + 0.0150. From this experimental regression, determine (a) the maximum velocity Vmax⁡V_{\max} (in μmol/(L⋅min)\mu\text{mol}/(\text{L}\cdot\text{min})), and (b) the Michaelis constant KmK_m (in mM\text{mM}).

Answer and steps

Final answer

(a) Vmax⁡=66.7 μmol/(L⋅min)V_{\max} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}); (b) Km=3.00 mMK_m = 3.00\text{ mM}

Steps

01

Formulate the Lineweaver-Burk Relationship

The Michaelis-Menten equation describes initial reaction velocity (v0v_0) as a function of substrate concentration ([S][S]):

v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}

Taking the reciprocal of both sides gives the Lineweaver-Burk (double-reciprocal) equation:

1v0=KmVmax⁡(1[S])+1Vmax⁡\frac{1}{v_0} = \frac{K_m}{V_{\max}}\left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}}

Comparing this to the standard linear equation y=mx+cy = mx + c:

  • y=1v0y = \frac{1}{v_0} (with units of min⋅Lμmol\frac{\text{min}\cdot\text{L}}{\mu\text{mol}})
  • x=1[S]x = \frac{1}{[S]} (with units of mM−1\text{mM}^{-1})
  • Slope (m)=KmVmax⁡=0.0450\text{Slope } (m) = \frac{K_m}{V_{\max}} = 0.0450
  • y-intercept (c)=1Vmax⁡=0.0150y\text{-intercept } (c) = \frac{1}{V_{\max}} = 0.0150

02

Determine Vmax⁡V_{\max}

The vertical intercept (cc) corresponds directly to 1Vmax⁡\frac{1}{V_{\max}}:

1Vmax⁡=0.0150 min⋅Lμmol\frac{1}{V_{\max}} = 0.0150\text{ }\frac{\text{min}\cdot\text{L}}{\mu\text{mol}}

Solve for Vmax⁡V_{\max}:

Vmax⁡=10.0150 μmolL⋅min≈66.7 μmol/(L⋅min)V_{\max} = \frac{1}{0.0150}\text{ }\frac{\mu\text{mol}}{\text{L}\cdot\text{min}} \approx 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})


03

Determine KmK_m

Using the slope of the regression line:

Slope=KmVmax⁡=0.0450\text{Slope} = \frac{K_m}{V_{\max}} = 0.0450

Multiplying both sides by Vmax⁡V_{\max} (or dividing the slope by the yy-intercept):

Km=Slope⋅Vmax⁡=Slopec=0.04500.0150=3.00 mMK_m = \text{Slope} \cdot V_{\max} = \frac{\text{Slope}}{c} = \frac{0.0450}{0.0150} = 3.00\text{ mM}

(Alternative check via the xx-intercept):
Setting y=0y = 0 gives the xx-intercept:

xint=−1Km=−0.01500.0450=−13.00 mM−1  ⟹  Km=3.00 mMx_{\text{int}} = -\frac{1}{K_m} = -\frac{0.0150}{0.0450} = -\frac{1}{3.00}\text{ mM}^{-1} \implies K_m = 3.00\text{ mM}


Key Takeaway & Common Pitfall

  • Units check: Ensure the reciprocal units are directly inverted: 1/y1/y yields μmol/(L⋅min)\mu\text{mol}/(\text{L}\cdot\text{min}), and −1/xint-1/x_{\text{int}} yields mM\text{mM}.
  • Extraneous parameters: Experimental details such as path length (bb) and molar absorptivity (ϵ\epsilon) relate to Beer-Lambert conversion during raw data processing, but once the double-reciprocal equation is established, they are not needed to find Vmax⁡V_{\max} and KmK_m.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the slope as Km directly rather than Km/Vmax, obtaining Km = 0.0450 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1/Vmax⁡=0.0150  ⟹  Vmax⁡=10.0150=66.7 μmol/(L⋅min)1/V_{\max} = 0.0150 \implies V_{\max} = \frac{1}{0.0150} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})

  2. Step 2

    Km=slope=0.0450 mMK_m = \text{slope} = 0.0450\text{ mM}

    Correct

    Km=Slope⋅Vmax⁡=0.04500.0150=3.00 mMK_m = \text{Slope} \cdot V_{\max} = \frac{0.0450}{0.0150} = 3.00\text{ mM}

    In a Lineweaver-Burk double-reciprocal plot (1v0\frac{1}{v_0} vs 1[S]\frac{1}{[S]}), the slope is KmVmax⁡\frac{K_m}{V_{\max}}, not KmK_m alone. To isolate KmK_m, you need to multiply the slope by Vmax⁡V_{\max} (or divide the slope by the yy-intercept).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the yy-intercept of a Lineweaver-Burk plot represents 1Vmax⁡\frac{1}{V_{\max}}.

You accurately calculated the reciprocal to obtain Vmax⁡=66.7 μmol/(L⋅min)V_{\max} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}) with appropriate significant figures and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Regression Kinetic Parameter Identification

Equating the regression line slope directly to KmK_m.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the slope of the Lineweaver-Burk equation (m=KmVmax⁡m = \frac{K_m}{V_{\max}}) with KmK_m itself, rather than dividing the slope by the yy-intercept (c=1Vmax⁡c = \frac{1}{V_{\max}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Lineweaver-Burk Slope Formula
  • Slope=KmVmax⁡\text{Slope} = \frac{K_m}{V_{\max}}

  • Always write out the linear equation 1v0=(KmVmax⁡)1[S]+1Vmax⁡\frac{1}{v_0} = \left(\frac{K_m}{V_{\max}}\right)\frac{1}{[S]} + \frac{1}{V_{\max}} and identify the slope as the ratio KmVmax⁡\frac{K_m}{V_{\max}}.

Finding $K_m$ from Intercepts and Slope
  • Km=Slopey-intercept=−1x-interceptK_m = \frac{\text{Slope}}{y\text{-intercept}} = -\frac{1}{x\text{-intercept}}

  • Calculate KmK_m either by dividing the slope by the yy-intercept or by taking the negative reciprocal of the xx-intercept.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the slope from the regression equation y=0.0450x+0.0150y = 0.0450x + 0.0150: Slope=KmVmax⁡=0.0450\text{Slope} = \frac{K_m}{V_{\max}} = 0.0450.

  2. Solve for KmK_m using Vmax⁡=10.0150V_{\max} = \frac{1}{0.0150}: Km=Slope⋅Vmax⁡=0.04500.0150=3.00 mMK_m = \text{Slope} \cdot V_{\max} = \frac{0.0450}{0.0150} = 3.00\text{ mM}.

Final answer

(a) Vmax⁡=66.7 μmol/(L⋅min)V_{\max} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}); (b) Km=3.00 mMK_m = 3.00\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic derivation of the Lineweaver-Burk equation from the Michaelis-Menten equation to see why Vmax⁡V_{\max} appears in the denominator of both the slope and intercept terms.

  • Practice checking your answer by setting y=0y = 0 to calculate the xx-intercept (−1Km-\frac{1}{K_m}) to ensure it matches your derived KmK_m.

OverviewACEpath Teacher's Diagnosis

02 The student equates the regression parameters directly to Vmax and Km without taking the reciprocals from the double-reciprocal plot, leading to Vmax = 0.0150 μmol/(L·min) and Km = 0.0450 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Vmax⁡=y-intercept=0.0150 μmol/(L⋅min)V_{\max} = y\text{-intercept} = 0.0150\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})

    Correct

    1Vmax⁡=0.0150  ⟹  Vmax⁡=10.0150≈66.7 μmol/(L⋅min)\frac{1}{V_{\max}} = 0.0150 \implies V_{\max} = \frac{1}{0.0150} \approx 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})

    In a double-reciprocal plot where y=1v0y = \frac{1}{v_0}, the vertical intercept equals 1Vmax⁡\frac{1}{V_{\max}}, not Vmax⁡V_{\max} itself. You need to take the reciprocal of the yy-intercept to find Vmax⁡V_{\max}.

  2. Step 2

    Km=slope=0.0450 mMK_m = \text{slope} = 0.0450\text{ mM}

    Correct

    Slope=KmVmax⁡=0.0450  ⟹  Km=Slope⋅Vmax⁡=0.04500.0150=3.00 mM\text{Slope} = \frac{K_m}{V_{\max}} = 0.0450 \implies K_m = \text{Slope} \cdot V_{\max} = \frac{0.0450}{0.0150} = 3.00\text{ mM}

    The slope of a Lineweaver-Burk line represents KmVmax⁡\frac{K_m}{V_{\max}}, not KmK_m alone. To isolate KmK_m, you must multiply the slope by Vmax⁡V_{\max} (or divide the slope by the yy-intercept).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the numerical slope (0.04500.0450) and vertical intercept (0.01500.0150) from the given regression equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal Parameter Inversion Error

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the Lineweaver-Burk linear fit as directly providing the kinetic constants, overlooking that taking the reciprocal of the Michaelis-Menten equation inverts the dependent variable and scales the slope by 1Vmax⁡\frac{1}{V_{\max}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Lineweaver-Burk Linear Form
  • Taking the reciprocal of v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} yields 1v0=(KmVmax⁡)1[S]+1Vmax⁡\frac{1}{v_0} = \left(\frac{K_m}{V_{\max}}\right)\frac{1}{[S]} + \frac{1}{V_{\max}}.

  • Always write down the algebraic mapping: Slope=KmVmax⁡\text{Slope} = \frac{K_m}{V_{\max}} and y-intercept=1Vmax⁡y\text{-intercept} = \frac{1}{V_{\max}} before solving for the kinetic constants.

Isolating Michaelis-Menten Parameters
  • Vmax⁡=1y-interceptV_{\max} = \frac{1}{y\text{-intercept}} and Km=Slopey-intercept=−1x-interceptK_m = \frac{\text{Slope}}{y\text{-intercept}} = -\frac{1}{x\text{-intercept}}.

  • Invert the yy-intercept to obtain Vmax⁡V_{\max}, then divide the slope by the yy-intercept to compute KmK_m.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Map the regression coefficients to double-reciprocal parameters: 1Vmax⁡=0.0150 min⋅Lμmol\frac{1}{V_{\max}} = 0.0150\text{ }\frac{\text{min}\cdot\text{L}}{\mu\text{mol}} and KmVmax⁡=0.0450 min⋅L⋅mMμmol\frac{K_m}{V_{\max}} = 0.0450\text{ }\frac{\text{min}\cdot\text{L}\cdot\text{mM}}{\mu\text{mol}}.

  2. Calculate Vmax⁡V_{\max}: Vmax⁡=10.0150≈66.7 μmol/(L⋅min)V_{\max} = \frac{1}{0.0150} \approx 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}).

  3. Calculate KmK_m: Km=Slopey-intercept=0.04500.0150=3.00 mMK_m = \frac{\text{Slope}}{y\text{-intercept}} = \frac{0.0450}{0.0150} = 3.00\text{ mM}.

Final answer

(a) Vmax⁡=66.7 μmol/(L⋅min)V_{\max} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}); (b) Km=3.00 mMK_m = 3.00\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving the Lineweaver-Burk equation directly from the Michaelis-Menten equation so the definitions of slope and intercept remain intuitive.

  • Check units at each step: note that the slope has units of time ⋅\cdot concentration, which cannot equal KmK_m by itself without dividing by the yy-intercept.

OverviewACEpath Teacher's Diagnosis

03 The student calculates Km by dividing the y-intercept by the slope rather than dividing the slope by the y-intercept, yielding Km = 0.333 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1/Vmax⁡=0.0150  ⟹  Vmax⁡=10.0150=66.7 μmol/(L⋅min)1/V_{\max} = 0.0150 \implies V_{\max} = \frac{1}{0.0150} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})

  2. Step 2

    Km=intercept / slope  ⟹  Km=0.0150/0.0450=0.333 mMK_m = \text{intercept } / \text{ slope} \implies K_m = 0.0150 / 0.0450 = 0.333\text{ mM}

    Correct

    Km=slopeintercept=slope⋅Vmax⁡=0.04500.0150=3.00 mMK_m = \frac{\text{slope}}{\text{intercept}} = \text{slope} \cdot V_{\max} = \frac{0.0450}{0.0150} = 3.00\text{ mM}

    In a Lineweaver-Burk plot, slope=KmVmax⁡\text{slope} = \frac{K_m}{V_{\max}} and y-intercept=1Vmax⁡y\text{-intercept} = \frac{1}{V_{\max}}. Therefore, Km=slopeintercept=slope⋅Vmax⁡K_m = \frac{\text{slope}}{\text{intercept}} = \text{slope} \cdot V_{\max}. Dividing the intercept by the slope computes 1Km\frac{1}{K_m} instead of KmK_m.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly linked the vertical intercept of the double-reciprocal plot to 1Vmax⁡\frac{1}{V_{\max}}.

You accurately carried out the reciprocal calculation to find Vmax⁡≈66.7 μmol/(L⋅min)V_{\max} \approx 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Lineweaver-Burk parameter ratio

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the algebraic ratio of the linear regression parameters, defining KmK_m as interceptslope\frac{\text{intercept}}{\text{slope}} rather than multiplying the slope by Vmax⁡V_{\max} (or dividing slope by intercept).

REASONING PATH
Your ACEpath teacher’s suggested approach
Lineweaver-Burk slope definition
  • Slope=KmVmax⁡\text{Slope} = \frac{K_m}{V_{\max}} and y-intercept=1Vmax⁡y\text{-intercept} = \frac{1}{V_{\max}}

  • Always write down the algebraic definitions of the slope and intercept before solving for KmK_m to verify the division direction.

Algebraic isolation of $K_m$
  • Km=Slopey-intercept=Slope⋅Vmax⁡K_m = \frac{\text{Slope}}{y\text{-intercept}} = \text{Slope} \cdot V_{\max}

  • Check units or multiply: (slope)×Vmax⁡=(min⋅Lμmol⋅mM)×(μmolL⋅min)=mM(\text{slope}) \times V_{\max} = \left(\frac{\text{min}\cdot\text{L}}{\mu\text{mol}} \cdot \text{mM}\right) \times \left(\frac{\mu\text{mol}}{\text{L}\cdot\text{min}}\right) = \text{mM}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the relationship from the Lineweaver-Burk equation: slope=KmVmax⁡=0.0450\text{slope} = \frac{K_m}{V_{\max}} = 0.0450.

  2. Express KmK_m by multiplying both sides by Vmax⁡V_{\max}: Km=slope⋅Vmax⁡=slopey-interceptK_m = \text{slope} \cdot V_{\max} = \frac{\text{slope}}{y\text{-intercept}}.

  3. Substitute the regression values: Km=0.04500.0150=3.00 mMK_m = \frac{0.0450}{0.0150} = 3.00\text{ mM}.

Final answer

(a) Vmax⁡=66.7 μmol/(L⋅min)V_{\max} = 66.7\text{ }\mu\text{mol}/(\text{L}\cdot\text{min}); (b) Km=3.00 mMK_m = 3.00\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving KmK_m directly from the Lineweaver-Burk line equation by substituting 1v0=KmVmax⁡(1[S])+1Vmax⁡\frac{1}{v_0} = \frac{K_m}{V_{\max}}\left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}}.

  • Perform dimensional analysis on your formulas to ensure your resulting parameter yields concentration units (such as mM\text{mM}) rather than reciprocal concentration (1/mM1/\text{mM}).

Lock it in

Similar question

01

An enzyme kinetics experiment yields a Lineweaver-Burk equation of y=0.0250x+0.0050y = 0.0250x + 0.0050, where yy is in sμM\frac{\text{s}}{\mu\text{M}} and xx is in mM−1\text{mM}^{-1}. Calculate (a) Vmax⁡V_{\max} (in μM/s\mu\text{M}/\text{s}) and (b) KmK_m (in mM\text{mM}).

Answer

(a) Vmax⁡=10.0050=200 μM/sV_{\max} = \frac{1}{0.0050} = 200\text{ }\mu\text{M}/\text{s}; (b) Km=Slopey-intercept=0.02500.0050=5.0 mMK_m = \frac{\text{Slope}}{y\text{-intercept}} = \frac{0.0250}{0.0050} = 5.0\text{ mM}.

02

A double-reciprocal plot for an alkaline phosphatase reaction gives an xx-intercept of −0.250 mM−1-0.250\text{ mM}^{-1} and a yy-intercept of 0.0500 min/μmol0.0500\text{ min}/\mu\text{mol}. Determine KmK_m (in mM\text{mM}), Vmax⁡V_{\max} (in μmol/min\mu\text{mol}/\text{min}), and the slope of the regression line.

Answer

Km=−1x-intercept=−1−0.250=4.00 mMK_m = -\frac{1}{x\text{-intercept}} = -\frac{1}{-0.250} = 4.00\text{ mM}; Vmax⁡=1y-intercept=10.0500=20.0 μmol/minV_{\max} = \frac{1}{y\text{-intercept}} = \frac{1}{0.0500} = 20.0\text{ }\mu\text{mol}/\text{min}; Slope=KmVmax⁡=4.0020.0=0.200 min⋅mM/μmol\text{Slope} = \frac{K_m}{V_{\max}} = \frac{4.00}{20.0} = 0.200\text{ min}\cdot\text{mM}/\mu\text{mol}.

03

In an inhibitor study, an enzyme without inhibitor exhibits the regression line y=0.060x+0.020y = 0.060x + 0.020. In the presence of a competitive inhibitor, the regression line changes to y=0.150x+0.020y = 0.150x + 0.020 (with yy in min/μM\text{min}/\mu\text{M} and xx in mM−1\text{mM}^{-1}). Find the uninhibited KmK_m and the apparent Km′K_m' in the presence of the inhibitor.

Answer

Uninhibited: Km=0.0600.020=3.0 mMK_m = \frac{0.060}{0.020} = 3.0\text{ mM}; Inhibited: Km′=0.1500.020=7.5 mMK_m' = \frac{0.150}{0.020} = 7.5\text{ mM} (note that Vmax⁡=10.020=50 μM/minV_{\max} = \frac{1}{0.020} = 50\text{ }\mu\text{M}/\text{min} remains unchanged, which is characteristic of competitive inhibition).

Loading workspace…