Resources

In Escherichia coli\textit{Escherichia coli}, transcription of the lac\textit{lac} operon is regulated by two distinct environmental signals: glucose availability (via cAMP-CAP catabolite repression) and lactose availability (via LacI repressor binding). Binding of the LacI repressor reduces transcription efficiency by a factor of 0.0200.020 (i.e., reduces basal rate by 98.0%98.0\%), while binding of the active cAMP-CAP complex enhances transcription efficiency by a factor of 50.050.0. Basal transcription efficiency with neither regulator bound is defined as 1.001.00. The cellular concentration of cAMP depends inversely on external glucose: [cAMP]=10.01.00+[glucose] μM[\text{cAMP}] = \frac{10.0}{1.00 + [\text{glucose}]}\text{ }\mu\text{M}, and active CAP complex formation requires [cAMP]≥2.50 μM[\text{cAMP}] \ge 2.50\text{ }\mu\text{M}. Conversely, allolactose (inducer) forms only when external lactose is present ([lactose]≥1.00 mM[\text{lactose}] \ge 1.00\text{ mM}), which causes LacI to dissociate from the operator. Calculate the overall relative transcription rate of the lac\textit{lac} operon in a culture medium containing [glucose]=4.00 mM[\text{glucose}] = 4.00\text{ mM} and [lactose]=0.20 mM[\text{lactose}] = 0.20\text{ mM}, relative to the fully induced maximum rate (where cAMP-CAP is bound and LacI is fully dissociated).

Answer and steps

Final answer

Relative transcription rate =4.00×10−4= 4.00 \times 10^{-4} (or 0.0400%0.0400\% of the fully induced maximum rate).

Steps

01

Determine the binding state of the cAMP-CAP complex

To find the relative transcription rate of the lac operon under the given conditions, we evaluate the binding status of both regulatory proteins: the catabolite activator protein (CAP\text{CAP}) and the LacI\text{LacI} repressor.

The concentration of cyclic AMP (cAMP\text{cAMP}) depends on the glucose concentration: [cAMP]=10.01.00+[glucose] μM[\text{cAMP}] = \frac{10.0}{1.00 + [\text{glucose}]}\,\mu\text{M}

Substitute [glucose]=4.00 mM[\text{glucose}] = 4.00\text{ mM}: [cAMP]=10.01.00+4.00=10.05.00=2.00 μM[\text{cAMP}] = \frac{10.0}{1.00 + 4.00} = \frac{10.0}{5.00} = 2.00\,\mu\text{M}

Active CAP\text{CAP} requires [cAMP]≥2.50 μM[\text{cAMP}] \ge 2.50\,\mu\text{M}. Because 2.00 μM<2.50 μM2.00\,\mu\text{M} < 2.50\,\mu\text{M}, active cAMP-CAP\text{cAMP-CAP} complexes cannot form:

  • CAP\text{CAP} does not bind to the promoter.
  • Transcription receives no enhancement from CAP\text{CAP} (enhancement factor =1.00= 1.00).
02

Determine the binding state of the LacI repressor

Allolactose induces transcription by causing the LacI\text{LacI} repressor to dissociate, but this requires [lactose]≥1.00 mM[\text{lactose}] \ge 1.00\text{ mM}.

Given [lactose]=0.20 mM[\text{lactose}] = 0.20\text{ mM}:

  • Because 0.20 mM<1.00 mM0.20\text{ mM} < 1.00\text{ mM}, sufficient inducer does not form.
  • The LacI\text{LacI} repressor remains bound to the operator.
  • Transcription efficiency is reduced by a factor of 0.0200.020.
03

Calculate the current absolute transcription efficiency

Multiplying the basal rate by the active regulatory factors: Ratecurrent=Basal rate×(LacI factor)×(CAP factor)\text{Rate}_{\text{current}} = \text{Basal rate} \times (\text{LacI factor}) \times (\text{CAP factor}) Ratecurrent=1.00×0.020×1.00=0.020\text{Rate}_{\text{current}} = 1.00 \times 0.020 \times 1.00 = 0.020

04

Determine the fully induced maximum transcription rate

In the fully induced state:

  • LacI\text{LacI} is fully dissociated (repression factor =1.00= 1.00).
  • The cAMP-CAP\text{cAMP-CAP} complex is bound (enhancement factor =50.0= 50.0).

Ratemax=1.00×1.00×50.0=50.0\text{Rate}_{\text{max}} = 1.00 \times 1.00 \times 50.0 = 50.0

05

Calculate the relative transcription rate

Compare the current rate to the maximum rate: Relative rate=RatecurrentRatemax=0.02050.0=4.00×10−4\text{Relative rate} = \frac{\text{Rate}_{\text{current}}}{\text{Rate}_{\text{max}}} = \frac{0.020}{50.0} = 4.00 \times 10^{-4}

Expressed as a percentage: Relative rate=4.00×10−4×100%=0.0400%\text{Relative rate} = 4.00 \times 10^{-4} \times 100\% = 0.0400\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the actual rate relative to basal transcription rather than relative to the fully induced maximum rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [cAMP]=10.01.00+4.00=2.00 μM  ⟹  2.00 μM<2.50 μM, so cAMP-CAP does not bind (enhancement = 1.00)[\text{cAMP}] = \frac{10.0}{1.00 + 4.00} = 2.00\text{ }\mu\text{M} \implies 2.00\text{ }\mu\text{M} < 2.50\text{ }\mu\text{M}\text{, so cAMP-CAP does not bind (enhancement = }1.00\text{)}

  2. Step 2

    [lactose]=0.20 mM<1.00 mM, so LacI remains bound (factor = 0.020)[\text{lactose}] = 0.20\text{ mM} < 1.00\text{ mM}\text{, so LacI remains bound (factor = }0.020\text{)}

  3. Step 3

    Actual rate=1.00×0.020=0.020\text{Actual rate} = 1.00 \times 0.020 = 0.020

  4. Step 4

    Relative rate=0.020\text{Relative rate} = 0.020

    Correct

    Relative rate=RatecurrentRatemax=0.02050.0=4.00×10−4\text{Relative rate} = \frac{\text{Rate}_{\text{current}}}{\text{Rate}_{\text{max}}} = \frac{0.020}{50.0} = 4.00 \times 10^{-4}

    You stated the rate relative to the basal rate (1.001.00) instead of dividing by the fully induced maximum rate (Ratemax=1.00×1.00×50.0=50.0\text{Rate}_{\text{max}} = 1.00 \times 1.00 \times 50.0 = 50.0).

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately computed the concentration of cAMP\text{cAMP} from the glucose concentration.

You correctly evaluated the threshold conditions for both the cAMP-CAP\text{cAMP-CAP} activator and the LacI\text{LacI} repressor.

You correctly calculated the current absolute transcription efficiency.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect reference state in relative rate calculation

You stopped after computing the rate relative to basal activity instead of completing the division by the maximum induced rate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the specified normalization baseline: the problem defined the target as the ratio to the fully induced maximum rate (where Ratemax=50.0\text{Rate}_{\text{max}} = 50.0), not the basal rate (1.001.00).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Reference Baseline
  • A relative rate is always computed as RateconditionRatereference\frac{\text{Rate}_{\text{condition}}}{\text{Rate}_{\text{reference}}}.

  • Always identify and calculate the numerical value of the specified reference state before taking the final ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the fully induced maximum rate: Ratemax=1.00×(repressor dissociated)×(CAP bound)=1.00×1.00×50.0=50.0\text{Rate}_{\text{max}} = 1.00 \times (\text{repressor dissociated}) \times (\text{CAP bound}) = 1.00 \times 1.00 \times 50.0 = 50.0.

  2. Divide the current absolute rate by the maximum rate: Relative rate=0.02050.0=4.00×10−4\text{Relative rate} = \frac{0.020}{50.0} = 4.00 \times 10^{-4}.

Final answer

Relative transcription rate=4.00×10−4 (or 0.0400% of maximum)\text{Relative transcription rate} = 4.00 \times 10^{-4}\text{ (or }0.0400\%\text{ of maximum)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check what baseline is requested whenever a question asks for a 'relative' rate or fold-change.

  • Calculate the maximum (or baseline) state explicitly as a named variable before computing the final quotient.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that any presence of lactose relieves LacI repression, ignoring the specified activation threshold concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [cAMP]=10.01.00+4.00=2.00 μM<2.50 μM  ⟹  CAP is not bound[\text{cAMP}] = \frac{10.0}{1.00 + 4.00} = 2.00\,\mu\text{M} < 2.50\,\mu\text{M}\implies \text{CAP is not bound}

  2. Step 2

    Lactose is present at 0.20 mM, so LacI dissociates (factor=1.00)\text{Lactose is present at } 0.20\text{ mM, so LacI dissociates (factor} = 1.00\text{)}

    Correct

    [lactose]=0.20 mM<1.00 mM  ⟹  LacI remains bound (factor=0.020)[\text{lactose}] = 0.20\text{ mM} < 1.00\text{ mM}\implies \text{LacI remains bound (factor} = 0.020\text{)}

    The problem states that sufficient allolactose forms to dissociate LacI only when [lactose]≥1.00 mM[\text{lactose}] \ge 1.00\text{ mM}. Because 0.20 mM<1.00 mM0.20\text{ mM} < 1.00\text{ mM}, LacI remains bound to the operator, reducing transcription efficiency by a factor of 0.0200.020.

  3. Step 3

    Actual rate=1.00×1.00=1.00\text{Actual rate} = 1.00 \times 1.00 = 1.00

    Correct

    Ratecurrent=1.00×0.020×1.00=0.020\text{Rate}_{\text{current}} = 1.00 \times 0.020 \times 1.00 = 0.020

    Because of the incorrect LacI factor in the previous step, your calculated current transcription rate was overestimated.

  4. Step 4

    Fully induced rate=50.0×1.00=50.0\text{Fully induced rate} = 50.0 \times 1.00 = 50.0

  5. Step 5

    Relative rate=1.0050.0=0.020\text{Relative rate} = \frac{1.00}{50.0} = 0.020

    Correct

    Relative rate=0.02050.0=4.00×10−4\text{Relative rate} = \frac{0.020}{50.0} = 4.00 \times 10^{-4}

    Your division method was set up correctly, but the final value was thrown off by the earlier error in the actual rate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the cAMP concentration from external glucose and verified it was below the threshold for CAP activation.

You correctly identified the fully induced maximum rate where CAP is bound and LacI is released.

You set up the correct ratio to compare the current transcription rate to the fully induced maximum rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored Threshold Condition

You treated the presence of lactose as a binary condition rather than checking whether its concentration met the specified threshold for induction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking quantitative activation thresholds: biological switches often require inducer molecules to exceed a critical concentration ([lactose]≥1.00 mM[\text{lactose}] \ge 1.00\text{ mM}) before repressor dissociation occurs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check LacI induction threshold
  • Induction requires [lactose]≥1.00 mM[\text{lactose}] \ge 1.00\text{ mM}. If [lactose]<1.00 mM[\text{lactose}] < 1.00\text{ mM}, LacI remains bound (repression factor =0.020= 0.020).

  • Always compare the supplied ligand concentration directly against the stated threshold before changing regulatory states.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare [lactose]=0.20 mM[\text{lactose}] = 0.20\text{ mM} to the threshold of 1.00 mM1.00\text{ mM}: since 0.20 mM<1.00 mM0.20\text{ mM} < 1.00\text{ mM}, LacI remains bound, giving a factor of 0.0200.020.

  2. Calculate the current transcription rate: Ratecurrent=1.00×0.020×1.00=0.020\text{Rate}_{\text{current}} = 1.00 \times 0.020 \times 1.00 = 0.020.

  3. Divide by the fully induced rate: Relative rate=0.02050.0=4.00×10−4\text{Relative rate} = \frac{0.020}{50.0} = 4.00 \times 10^{-4} (or 0.0400%0.0400\%).

Final answer

4.00×10−44.00 \times 10^{-4} (or 0.0400%0.0400\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review threshold conditions for both positive and negative operon regulators.

  • Practice distinguishing sub-threshold ligand concentrations from fully inducing concentrations in gene regulation problems.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the 98% reduction from the fully induced state or misinterprets the 0.020 factor as a reduction from 1.00 rather than a multiplicative factor on the basal rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [cAMP]=10.0/(1.00+4.00)=2.00 μM<2.50 μM, so CAP is inactive[\text{cAMP}] = 10.0 / (1.00 + 4.00) = 2.00\text{ }\mu\text{M} < 2.50\text{ }\mu\text{M}\text{, so CAP is inactive}

  2. Step 2

    [lactose]=0.20 mM<1.00 mM, so LacI is bound, reducing basal rate by 0.980.[\text{lactose}] = 0.20\text{ mM} < 1.00\text{ mM}\text{, so LacI is bound, reducing basal rate by } 0.980.

  3. Step 3

    Actual rate=1.00−0.020=0.980\text{Actual rate} = 1.00 - 0.020 = 0.980

    Correct

    Actual rate=1.00×0.020=0.020\text{Actual rate} = 1.00 \times 0.020 = 0.020

    The problem states that LacI reduces transcription efficiency by a factor of 0.0200.020 (leaving 2.0%2.0\% of the basal rate, or a 98.0%98.0\% reduction). You subtracted 0.0200.020 as an additive term rather than multiplying the basal rate by the scaling factor.

  4. Step 4

    Fully induced rate=50.0\text{Fully induced rate} = 50.0

  5. Step 5

    Relative rate=0.980/50.0=0.0196\text{Relative rate} = 0.980 / 50.0 = 0.0196

    Correct

    Relative rate=0.02050.0=4.00×10−4\text{Relative rate} = \frac{0.020}{50.0} = 4.00 \times 10^{-4}

    Your division setup was correct, but the calculation propagated your incorrect actual rate from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the mathematical threshold for cAMP and deduced that CAP remains inactive.

You correctly concluded that the LacI repressor remains bound because external lactose is below 1.00 mM1.00\text{ mM}.

You correctly established the maximum transcription rate as 50.050.0 and set up the relative ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplicative Factor vs. Additive Subtraction

You subtracted the factor of 0.0200.020 from the basal rate (1.00−0.020=0.9801.00 - 0.020 = 0.980) instead of multiplying by it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused a fractional multiplicative scaling factor (0.0200.020) with the fraction being deducted, or treated 'reduced by a factor of xx' as an additive subtraction (1−x1 - x) rather than recognizing that reducing a rate by 98.0%98.0\% leaves 1.00×(1−0.980)=0.0201.00 \times (1 - 0.980) = 0.020.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting Rate Factors
  • A regulatory 'factor of kk' scales the basal rate multiplicatively: Rate=Basal×k\text{Rate} = \text{Basal} \times k. A 98%98\% reduction means the remaining fraction is 100%−98%=2%=0.020100\% - 98\% = 2\% = 0.020.

  • Always multiply the baseline rate by the given factor rather than subtracting the factor from the baseline.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ratecurrent=Basal rate×(LacI factor)×(CAP factor)=1.00×0.020×1.00=0.020\text{Rate}_{\text{current}} = \text{Basal rate} \times (\text{LacI factor}) \times (\text{CAP factor}) = 1.00 \times 0.020 \times 1.00 = 0.020

  2. Relative rate=RatecurrentRatemax⁡=0.02050.0=4.00×10−4\text{Relative rate} = \frac{\text{Rate}_{\text{current}}}{\text{Rate}_{\max}} = \frac{0.020}{50.0} = 4.00 \times 10^{-4}

Final answer

4.00×10−44.00 \times 10^{-4} (or 0.0400%0.0400\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how percentage reductions correspond to multiplicative retention factors in biological reaction kinetics.

  • Practice converting phrasing like 'reduced by a factor of xx' and 'reduced by P%P\%' into multiplicative terms before computing overall rates.

Lock it in

Similar question

01

Using the same lac operon model, calculate the transcription rate relative to the fully induced maximum rate in a medium containing [glucose]=0.00 mM[\text{glucose}] = 0.00\text{ mM} and [lactose]=0.50 mM[\text{lactose}] = 0.50\text{ mM}.

Answer

4.00×10−44.00 \times 10^{-4} (or 0.0400%0.0400\%). Steps: [cAMP]=10.01.00+0.00=10.0 μM≥2.50 μM[\text{cAMP}] = \frac{10.0}{1.00 + 0.00} = 10.0\text{ }\mu\text{M} \ge 2.50\text{ }\mu\text{M}, so CAP binds (factor =50.0= 50.0). But [lactose]=0.50 mM<1.00 mM[\text{lactose}] = 0.50\text{ mM} < 1.00\text{ mM}, so LacI remains bound (factor =0.020= 0.020). Current rate =1.00×0.020×50.0=1.00= 1.00 \times 0.020 \times 50.0 = 1.00. Relative rate =1.0050.0=0.0200=2.00%= \frac{1.00}{50.0} = 0.0200 = 2.00\%. (Correction: Current rate =1.00  ⟹  Relative rate=1.0050.0=0.0200= 1.00 \implies \text{Relative rate} = \frac{1.00}{50.0} = 0.0200 or 2.00%2.00\%).

02

Using the same model, calculate the transcription rate relative to the fully induced maximum rate when [glucose]=9.00 mM[\text{glucose}] = 9.00\text{ mM} and [lactose]=2.00 mM[\text{lactose}] = 2.00\text{ mM}.

Answer

0.02000.0200 (or 2.00%2.00\%). Steps: [cAMP]=10.01.00+9.00=1.00 μM<2.50 μM[\text{cAMP}] = \frac{10.0}{1.00 + 9.00} = 1.00\text{ }\mu\text{M} < 2.50\text{ }\mu\text{M}, so CAP does not bind (factor =1.00= 1.00). Because [lactose]=2.00 mM≥1.00 mM[\text{lactose}] = 2.00\text{ mM} \ge 1.00\text{ mM}, LacI dissociates (factor =1.00= 1.00). Current rate =1.00×1.00×1.00=1.00= 1.00 \times 1.00 \times 1.00 = 1.00. Relative rate =1.0050.0=0.0200=2.00%= \frac{1.00}{50.0} = 0.0200 = 2.00\%.

03

A mutant bacterial strain has a modified LacI that reduces basal transcription by a factor of 0.00500.0050 instead of 0.0200.020, but its cAMP-CAP enhancement remains 50.050.0. If [glucose]=3.00 mM[\text{glucose}] = 3.00\text{ mM} and [lactose]=0.10 mM[\text{lactose}] = 0.10\text{ mM}, find the transcription rate relative to the mutant's fully induced maximum rate.

Answer

1.00×10−41.00 \times 10^{-4} (or 0.0100%0.0100\%). Steps: [cAMP]=10.01.00+3.00=2.50 μM≥2.50 μM[\text{cAMP}] = \frac{10.0}{1.00 + 3.00} = 2.50\text{ }\mu\text{M} \ge 2.50\text{ }\mu\text{M}, so CAP binds (enhancement =50.0= 50.0). With [lactose]=0.10 mM<1.00 mM[\text{lactose}] = 0.10\text{ mM} < 1.00\text{ mM}, mutant LacI is bound (factor =0.0050= 0.0050). Current rate =1.00×0.0050×50.0=0.250= 1.00 \times 0.0050 \times 50.0 = 0.250. The fully induced rate is 1.00×1.00×50.0=50.01.00 \times 1.00 \times 50.0 = 50.0. Relative rate =0.25050.0=5.00×10−3=0.500%= \frac{0.250}{50.0} = 5.00 \times 10^{-3} = 0.500\%.

Loading workspace…