Resources

In a bacterial cell-free protein synthesis system, transcription and translation are coupled in a 250 μL250\,\mu\text{L} micro-reaction vessel. A polycistronic mRNA template is transcribed, and ribosomes translate green fluorescent protein (GFP, molecular weight 27.0 kDa=27,000 g/mol27.0\text{ kDa} = 27{,}000\text{ g/mol}). Over a 45-minute45\text{-minute} incubation, the reaction produces 32.4 μg32.4\,\mu\text{g} of GFP. Assuming Avogadro's number is NA=6.022×1023 molecules/molN_A = 6.022 \times 10^{23}\text{ molecules/mol}, calculate: (a) the molar concentration of synthesized GFP in micromolar (μM\mu\text{M}), and (b) the average translation yield expressed as the total number of completed GFP protein molecules produced per minute across the entire reaction volume.

Answer and steps

Final answer

(a) 4.80 μM4.80\,\mu\text{M}. (b) 1.61×1013 molecules/min1.61 \times 10^{13}\text{ molecules/min}.

Steps

Part (a): Calculating the Molar Concentration of GFP

  1. Find the number of moles of GFP produced: The relationship between mass (mm), molar mass (MM), and amount in moles (nn) is: n=mMn = \frac{m}{M}

    Substitute the given values: n=32.4×10−6 g27,000 g/mol=1.20×10−9 moln = \frac{32.4 \times 10^{-6}\text{ g}}{27{,}000\text{ g/mol}} = 1.20 \times 10^{-9}\text{ mol}

  2. Convert reaction volume to liters: V=250 μL=250×10−6 L=2.50×10−4 LV = 250\,\mu\text{L} = 250 \times 10^{-6}\text{ L} = 2.50 \times 10^{-4}\text{ L}
  3. Calculate the molar concentration (CC): C=nV=1.20×10−9 mol2.50×10−4 L=4.80×10−6 M=4.80 μMC = \frac{n}{V} = \frac{1.20 \times 10^{-9}\text{ mol}}{2.50 \times 10^{-4}\text{ L}} = 4.80 \times 10^{-6}\text{ M} = 4.80\,\mu\text{M}

Common Pitfall: Ensure consistent units before dividing. Alternatively, mass concentration can be calculated directly in mg/mL\text{mg/mL} or g/L\text{g/L} (32.4 μg250 μL=0.1296 g/L\frac{32.4\,\mu\text{g}}{250\,\mu\text{L}} = 0.1296\text{ g/L}), then divided by molar mass (27,000 g/mol27{,}000\text{ g/mol}) to yield 4.80×10−6 mol/L=4.80 μM4.80 \times 10^{-6}\text{ mol/L} = 4.80\,\mu\text{M}.


Part (b): Calculating the Average Translation Yield per Minute

  1. Determine the total number of GFP molecules synthesized: Using Avogadro's number (NA=6.022×1023 molecules/molN_A = 6.022 \times 10^{23}\text{ molecules/mol}): Ntotal=n⋅NAN_{\text{total}} = n \cdot N_A Ntotal=(1.20×10−9 mol)⋅(6.022×1023 molecules/mol)≈7.2264×1014 moleculesN_{\text{total}} = (1.20 \times 10^{-9}\text{ mol}) \cdot (6.022 \times 10^{23}\text{ molecules/mol}) \approx 7.2264 \times 10^{14}\text{ molecules}
  2. Calculate the rate of production per minute over the incubation period: The reaction ran for t=45 mint = 45\text{ min}: Rate=Ntotalt=7.2264×1014 molecules45 min≈1.61×1013 molecules/min\text{Rate} = \frac{N_{\text{total}}}{t} = \frac{7.2264 \times 10^{14}\text{ molecules}}{45\text{ min}} \approx 1.61 \times 10^{13}\text{ molecules/min}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the reaction volume from microliters to liters when calculating molarity, resulting in a concentration that is off by a factor of 10⁶.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=32.4×10−6 g/27000 g/mol=1.20×10−9 moln = 32.4 \times 10^{-6}\text{ g} / 27000\text{ g/mol} = 1.20 \times 10^{-9}\text{ mol}

  2. Step 2

    C=1.20×10−9 mol/250 L=4.80×10−12 MC = 1.20 \times 10^{-9}\text{ mol} / 250\text{ L} = 4.80 \times 10^{-12}\text{ M}

    Correct

    C=nV=1.20×10−9 mol250×10−6 L=4.80×10−6 MC = \frac{n}{V} = \frac{1.20 \times 10^{-9}\text{ mol}}{250 \times 10^{-6}\text{ L}} = 4.80 \times 10^{-6}\text{ M}

    You substituted the volume as 250 L250\text{ L} instead of converting 250 μL250\,\mu\text{L} to liters (250×10−6 L250 \times 10^{-6}\text{ L}, or 2.50×10−4 L2.50 \times 10^{-4}\text{ L}). Molarity requires volume in liters.

  3. Step 3

    C=4.80×10−6 μMC = 4.80 \times 10^{-6}\ \mu\text{M}

    Correct

    C=4.80×10−6 M×106 μM/M=4.80 μMC = 4.80 \times 10^{-6}\text{ M} \times 10^6\,\mu\text{M/M} = 4.80\,\mu\text{M}

    You correctly converted your calculated molarity to micromolar by multiplying by 10610^6, but the value was affected by the unscaled volume from the previous step.

  4. Step 4

    N=1.20×10−9 mol×6.022×1023 molecules/mol=7.23×1014 moleculesN = 1.20 \times 10^{-9}\text{ mol} \times 6.022 \times 10^{23}\text{ molecules/mol} = 7.23 \times 10^{14}\text{ molecules}

  5. Step 5

    Rate=7.23×1014 molecules/45 min=1.61×1013 molecules/min\text{Rate} = 7.23 \times 10^{14}\text{ molecules} / 45\text{ min} = 1.61 \times 10^{13}\text{ molecules/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar mass of GFP to calculate the total moles synthesized.

You applied Avogadro's number accurately to determine the total molecule count.

You computed the average translation rate per minute with correct units and significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission in volume

You wrote 250 L250\text{ L} instead of 250 μL250\,\mu\text{L} when setting up the concentration formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefix scaling when substituting into standard thermodynamic and concentration formulas (C=n/VC = n/V), where volume must be expressed in liters (1 μL=10−6 L1\,\mu\text{L} = 10^{-6}\text{ L}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Volume Rule
  • Molarity is defined as moles of solute per liter of solution: M=mol/LM = \text{mol}/\text{L}.

  • Always convert micro-volumes (V μLV\,\mu\text{L}) to liters (V×10−6 LV \times 10^{-6}\text{ L}) before dividing.

Direct Micro-Scale Shortcut
  • Dividing nanomoles (nmol\text{nmol}) by microliters (μL\mu\text{L}) or micromoles (μmol\mu\text{mol}) by milliliters (mL\text{mL}) directly gives millimolar or micromolar concentration.

  • Check whether your units cancel directly: 1.20 nmol250 μL=0.0048 mM=4.80 μM\frac{1.20\text{ nmol}}{250\,\mu\text{L}} = 0.0048\text{ mM} = 4.80\,\mu\text{M}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the vessel volume: V=250 μL=2.50×10−4 LV = 250\,\mu\text{L} = 2.50 \times 10^{-4}\text{ L}.

  2. Calculate molar concentration in molar: C=1.20×10−9 mol2.50×10−4 L=4.80×10−6 MC = \frac{1.20 \times 10^{-9}\text{ mol}}{2.50 \times 10^{-4}\text{ L}} = 4.80 \times 10^{-6}\text{ M}.

  3. Convert molar to micromolar: C=4.80×10−6 M×106 μMM=4.80 μMC = 4.80 \times 10^{-6}\text{ M} \times 10^6\,\frac{\mu\text{M}}{\text{M}} = 4.80\,\mu\text{M}.

Final answer

(a) 4.80 μM4.80\,\mu\text{M}, (b) 1.61×1013 molecules/min1.61 \times 10^{13}\text{ molecules/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all volume units are converted to liters whenever you compute molarity (M=mol/LM = \text{mol/L}).

  • Sanity check cell-free yields: typical in vitro transcription-translation yields range from low μM\mu\text{M} to tens of μM\mu\text{M}, so a result of 10−6 μM10^{-6}\,\mu\text{M} (picomolar) signals a volume conversion oversight.

OverviewACEpath Teacher's Diagnosis

02 The student converts the 45-minute incubation time into seconds when calculating the production rate per minute, dividing by 2700 instead of 45.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=32.4 μg/27000 g/mol=1.20×10−3 μmol  ⟹  V=250 μL=0.250 mL=2.50×10−4 L  ⟹  C=1.20×10−3 μmol/2.50×10−4 L=4.80 μMn = 32.4\,\mu\text{g} / 27000\text{ g/mol} = 1.20 \times 10^{-3}\,\mu\text{mol} \implies V = 250\,\mu\text{L} = 0.250\text{ mL} = 2.50 \times 10^{-4}\text{ L} \implies C = 1.20 \times 10^{-3}\,\mu\text{mol} / 2.50 \times 10^{-4}\text{ L} = 4.80\,\mu\text{M}

  2. Step 2

    N=1.20×10−9 mol×6.022×1023=7.23×1014 moleculesN = 1.20 \times 10^{-9}\text{ mol} \times 6.022 \times 10^{23} = 7.23 \times 10^{14}\text{ molecules}

  3. Step 3

    Rate=7.23×1014 molecules/2700 min=2.68×1011 molecules/min\text{Rate} = 7.23 \times 10^{14}\text{ molecules} / 2700\text{ min} = 2.68 \times 10^{11}\text{ molecules/min}

    Correct

    Rate=7.23×1014 molecules45 min≈1.61×1013 molecules/min\text{Rate} = \frac{7.23 \times 10^{14}\text{ molecules}}{45\text{ min}} \approx 1.61 \times 10^{13}\text{ molecules/min}

    The question asks for the rate per minute, so the denominator must be the time in minutes (45 min45\text{ min}). You converted 45 min45\text{ min} into 2700 s2700\text{ s} but labeled and treated it as 2700 min2700\text{ min}, which made your rate 60 times too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted micrograms to micromoles using the molecular weight of GFP.

You converted the reaction volume from microliters to liters to find the molar concentration in micromolar.

You successfully multiplied the total moles by Avogadro's constant to get the total number of GFP molecules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unnecessary / mismatched time-unit conversion

You calculated 45 min×60 s/min=2700 s45\text{ min} \times 60\text{ s/min} = 2700\text{ s}, but substituted 27002700 directly into the denominator with the unit min\text{min}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You automatically converted time to standard SI seconds out of habit, overlooking that the requested rate unit was explicitly molecules per minute.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the requested rate unit before converting time
  • If a problem asks for a yield or rate 'per minute', keep time in minutes (t=45 mint = 45\text{ min}) rather than converting to seconds.

  • Always circle or underline the target time unit in the question stem before setting up the final division.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target rate unit: molecules/min\text{molecules/min}.

  2. Keep the incubation time in minutes: t=45 mint = 45\text{ min}.

  3. Divide total molecules by time in minutes: Rate=7.226×1014 molecules45 min≈1.61×1013 molecules/min\text{Rate} = \frac{7.226 \times 10^{14}\text{ molecules}}{45\text{ min}} \approx 1.61 \times 10^{13}\text{ molecules/min}.

Final answer

(a) 4.80 μM4.80\,\mu\text{M}; (b) 1.61×1013 molecules/min1.61 \times 10^{13}\text{ molecules/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay close attention to target unit dimensions (e.g., per minute vs. per second) when reporting biochemical reaction rates.

  • Practice checking whether an intermediate unit conversion (such as minutes to seconds) is actually required by the final question prompt.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the molecular weight in kilodaltons as grams per mole directly without multiplying by 1,000, setting M = 27 g/mol instead of 27,000 g/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=32.4×10−6 g/27 g/mol=1.20×10−6 moln = 32.4 \times 10^{-6}\text{ g} / 27\text{ g/mol} = 1.20 \times 10^{-6}\text{ mol}

    Correct

    n=mM=32.4×10−6 g27,000 g/mol=1.20×10−9 moln = \frac{m}{M} = \frac{32.4 \times 10^{-6}\text{ g}}{27{,}000\text{ g/mol}} = 1.20 \times 10^{-9}\text{ mol}

    You converted 32.4 μg32.4\,\mu\text{g} to grams correctly, but you divided by 27 g/mol27\text{ g/mol} rather than 27,000 g/mol27{,}000\text{ g/mol}. Because 1 kDa=1,000 Da=1,000 g/mol1\text{ kDa} = 1{,}000\text{ Da} = 1{,}000\text{ g/mol}, a 27.0 kDa27.0\text{ kDa} protein has a molar mass of 27,000 g/mol27{,}000\text{ g/mol}.

  2. Step 2

    V=250×10−6 L  ⟹  C=1.20×10−6 mol250×10−6 L=4.80×10−3 M=4800 μMV = 250 \times 10^{-6}\text{ L} \implies C = \frac{1.20 \times 10^{-6}\text{ mol}}{250 \times 10^{-6}\text{ L}} = 4.80 \times 10^{-3}\text{ M} = 4800\,\mu\text{M}

    Correct

    C=nV=1.20×10−9 mol2.50×10−4 L=4.80×10−6 M=4.80 μMC = \frac{n}{V} = \frac{1.20 \times 10^{-9}\text{ mol}}{2.50 \times 10^{-4}\text{ L}} = 4.80 \times 10^{-6}\text{ M} = 4.80\,\mu\text{M}

    Your formula C=nVC = \frac{n}{V} and your conversion of 250 μL250\,\mu\text{L} to liters were completely correct. The resulting concentration of 4800 μM4800\,\mu\text{M} is off by a factor of 1,0001{,}000 solely due to the mole value carried over from Step 1.

  3. Step 3

    N=1.20×10−6 mol×6.022×1023 molecules/mol=7.23×1017 moleculesN = 1.20 \times 10^{-6}\text{ mol} \times 6.022 \times 10^{23}\text{ molecules/mol} = 7.23 \times 10^{17}\text{ molecules}

    Correct

    N=n⋅NA=(1.20×10−9 mol)(6.022×1023 molecules/mol)≈7.23×1014 moleculesN = n \cdot N_A = (1.20 \times 10^{-9}\text{ mol})(6.022 \times 10^{23}\text{ molecules/mol}) \approx 7.23 \times 10^{14}\text{ molecules}

    You applied Avogadro's number accurately to find the total molecule count. This value is 1,0001{,}000 times too large because of the initial mole calculation.

  4. Step 4

    Rate=7.23×1017 molecules45 min=1.61×1016 molecules/min\text{Rate} = \frac{7.23 \times 10^{17}\text{ molecules}}{45\text{ min}} = 1.61 \times 10^{16}\text{ molecules/min}

    Correct

    Rate=Nt=7.23×1014 molecules45 min≈1.61×1013 molecules/min\text{Rate} = \frac{N}{t} = \frac{7.23 \times 10^{14}\text{ molecules}}{45\text{ min}} \approx 1.61 \times 10^{13}\text{ molecules/min}

    You correctly divided the total molecule count by the reaction time of 45 minutes45\text{ minutes}. Your answer follows logically from your previous step, but reflects the initial 1,0001{,}000-fold discrepancy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted microgram mass (32.4 μg=32.4×10−6 g32.4\,\mu\text{g} = 32.4 \times 10^{-6}\text{ g}) and microliter volume (250 μL=2.50×10−4 L250\,\mu\text{L} = 2.50 \times 10^{-4}\text{ L}).

You used the exact definition of molarity (C=n/VC = n / V) and successfully converted between molar and micromolar units.

You correctly multiplied by Avogadro's constant to relate moles to discrete molecules.

You divided the total yield by elapsed minutes to calculate the translation rate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error (kDa to g/mol)

You dropped the 'kilo-' prefix from kilodaltons, treating 27.0 kDa27.0\text{ kDa} as 27 g/mol27\text{ g/mol} instead of 27,000 g/mol27{,}000\text{ g/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing daltons with kilodaltons when converting protein molecular mass to molar mass. 1 Da=1 g/mol1\text{ Da} = 1\text{ g/mol}, so 1 kDa=1,000 Da=1,000 g/mol1\text{ kDa} = 1{,}000\text{ Da} = 1{,}000\text{ g/mol}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Protein Molecular Weight Conversion
  • 1 Da=1 g/mol  ⟹  1 kDa=103 g/mol1\text{ Da} = 1\text{ g/mol} \implies 1\text{ kDa} = 10^3\text{ g/mol}

  • Whenever protein mass is given in kDa\text{kDa}, multiply by 1,0001{,}000 to obtain the molar mass in g/mol\text{g/mol} before computing moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the amount of GFP in moles using M=27,000 g/molM = 27{,}000\text{ g/mol}: n=32.4×10−6 g27,000 g/mol=1.20×10−9 moln = \frac{32.4 \times 10^{-6}\text{ g}}{27{,}000\text{ g/mol}} = 1.20 \times 10^{-9}\text{ mol}.

  2. Divide by the reaction volume: C=1.20×10−9 mol2.50×10−4 L=4.80×10−6 M=4.80 μMC = \frac{1.20 \times 10^{-9}\text{ mol}}{2.50 \times 10^{-4}\text{ L}} = 4.80 \times 10^{-6}\text{ M} = 4.80\,\mu\text{M}.

  3. Compute the total number of GFP molecules: N=(1.20×10−9 mol)×(6.022×1023 molecules/mol)=7.23×1014 moleculesN = (1.20 \times 10^{-9}\text{ mol}) \times (6.022 \times 10^{23}\text{ molecules/mol}) = 7.23 \times 10^{14}\text{ molecules}.

  4. Find the rate of production per minute: Rate=7.23×1014 molecules45 min=1.61×1013 molecules/min\text{Rate} = \frac{7.23 \times 10^{14}\text{ molecules}}{45\text{ min}} = 1.61 \times 10^{13}\text{ molecules/min}.

Final answer

(a) 4.80 μM4.80\,\mu\text{M}; (b) 1.61×1013 molecules/min1.61 \times 10^{13}\text{ molecules/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the prefix 'kilo-' (10310^3) in daltons: always write out M=(value in kDa)×103 g/molM = (\text{value in kDa}) \times 10^3\text{ g/mol}.

  • Perform a sanity check on protein size: an average amino acid weighs ≈110 Da\approx 110\text{ Da}, so a functional protein cannot have a molar mass as small as 27 g/mol27\text{ g/mol} (which is less than two amino acids).

  • Practice multi-step stoichiometric yield calculations for in vitro transcription and translation reactions.

Lock it in

Similar question

01

A cell-free protein synthesis reaction with a volume of 50 μL50\,\mu\text{L} produces 5.4 μg5.4\,\mu\text{g} of an engineered fluorescent protein (molecular weight 27,000 g/mol27{,}000\text{ g/mol}). What is the final molar concentration in micromolar (μM\mu\text{M})?

Answer

4.0 μM4.0\,\mu\text{M}. First find moles: n=5.4×10−6 g27,000 g/mol=2.0×10−10 moln = \frac{5.4 \times 10^{-6}\text{ g}}{27{,}000\text{ g/mol}} = 2.0 \times 10^{-10}\text{ mol}. Convert volume to liters: V=50×10−6 L=5.0×10−5 LV = 50 \times 10^{-6}\text{ L} = 5.0 \times 10^{-5}\text{ L}. Then C=2.0×10−10 mol5.0×10−5 L=4.0×10−6 M=4.0 μMC = \frac{2.0 \times 10^{-10}\text{ mol}}{5.0 \times 10^{-5}\text{ L}} = 4.0 \times 10^{-6}\text{ M} = 4.0\,\mu\text{M}.

02

A 100 μL100\,\mu\text{L} in vitro translation reaction produces luciferase (molecular weight 61.0 kDa=61,000 g/mol61.0\text{ kDa} = 61{,}000\text{ g/mol}) at a concentration of 3.5 μM3.5\,\mu\text{M} over a 60-minute60\text{-minute} incubation. Assuming Avogadro's number is NA=6.022×1023 molecules/molN_A = 6.022 \times 10^{23}\text{ molecules/mol}, calculate: (a) the total mass of luciferase produced in micrograms (μg\mu\text{g}), and (b) the translation rate in molecules per minute.

Answer

(a) 21.35 μg21.35\,\mu\text{g}, (b) 3.51×1012 molecules/min3.51 \times 10^{12}\text{ molecules/min}. Key steps: Total moles n=C×V=(3.5×10−6 mol/L)×(1.0×10−4 L)=3.5×10−10 moln = C \times V = (3.5 \times 10^{-6}\text{ mol/L}) \times (1.0 \times 10^{-4}\text{ L}) = 3.5 \times 10^{-10}\text{ mol}. Mass m=n×M=3.5×10−10 mol×61,000 g/mol=2.135×10−5 g=21.35 μgm = n \times M = 3.5 \times 10^{-10}\text{ mol} \times 61{,}000\text{ g/mol} = 2.135 \times 10^{-5}\text{ g} = 21.35\,\mu\text{g}. Total molecules N=n×NA=3.5×10−10×6.022×1023≈2.108×1014N = n \times N_A = 3.5 \times 10^{-10} \times 6.022 \times 10^{23} \approx 2.108 \times 10^{14} molecules. Translation rate =2.108×1014 molecules60 min≈3.51×1012 molecules/min= \frac{2.108 \times 10^{14}\text{ molecules}}{60\text{ min}} \approx 3.51 \times 10^{12}\text{ molecules/min}.

03

A cell-free transcription-translation reaction produces a dimeric enzyme (monomer molecular weight 40,000 g/mol40{,}000\text{ g/mol}; active functional dimer molecular weight 80,000 g/mol80{,}000\text{ g/mol}). In a 500 μL500\,\mu\text{L} volume, 1.2044×10141.2044 \times 10^{14} complete active dimers are assembled in 2 hours2\text{ hours}. Calculate: (a) the concentration of the active dimeric enzyme in micromolar (μM\mu\text{M}), and (b) the total synthesis rate of individual monomer peptide chains in molecules per second.

Answer

(a) 0.40 μM0.40\,\mu\text{M}, (b) 3.35×1010 monomers/s3.35 \times 10^{10}\text{ monomers/s}. Key steps: Moles of dimer ndimer=1.2044×1014 molecules6.022×1023 molecules/mol=2.0×10−10 moln_{\text{dimer}} = \frac{1.2044 \times 10^{14}\text{ molecules}}{6.022 \times 10^{23}\text{ molecules/mol}} = 2.0 \times 10^{-10}\text{ mol}. Dimer concentration C=2.0×10−10 mol500×10−6 L=4.0×10−7 M=0.40 μMC = \frac{2.0 \times 10^{-10}\text{ mol}}{500 \times 10^{-6}\text{ L}} = 4.0 \times 10^{-7}\text{ M} = 0.40\,\mu\text{M}. Each dimer contains 22 monomers, so total monomers produced =2×1.2044×1014=2.4088×1014= 2 \times 1.2044 \times 10^{14} = 2.4088 \times 10^{14} monomers. Total seconds =2 h×3600 s/h=7200 s= 2\text{ h} \times 3600\text{ s/h} = 7200\text{ s}. Monomer production rate =2.4088×1014 monomers7200 s≈3.35×1010 monomers/s= \frac{2.4088 \times 10^{14}\text{ monomers}}{7200\text{ s}} \approx 3.35 \times 10^{10}\text{ monomers/s}.

Loading workspace…