Resources

In a coral reef ecosystem, broadcast spawning of two sea star species (Species ASpecies\ A and Species BSpecies\ B) occurs during an annual mass spawning event. Gamete concentrations in a 5.0 L5.0\text{ L} seawater sample are quantified: Species A releases sperm at a concentration of 2.4×105 cells/mL2.4 \times 10^5\text{ cells/mL}, and Species B releases sperm at 1.8×105 cells/mL1.8 \times 10^5\text{ cells/mL}. A researcher cultures 250250 eggs of Species A in a microtiter plate containing a 1.0 mL1.0\text{ mL} aliquot of heterospecific sperm (Species B) at a concentration of 1.8×105 cells/mL1.8 \times 10^5\text{ cells/mL}. After 4 hours4\text{ hours}, exactly 55 eggs show successful cleavage into a 2-cell stage, while the remaining 245245 eggs remain unfertilized. (a) Express the cross-fertilization rate as a percentage. (b) Convert the total number of sperm present in the full 5.0 L5.0\text{ L} water column for Species A into scientific notation. (c) State why polyspermy prevention mechanisms (fast and slow blocks) are distinct from gametic isolation barriers between different species.

Answer and steps

Final answer

(a) 2.0%2.0\% (5/250×100%5 / 250 \times 100\%). (b) 1.2×109 sperm cells1.2 \times 10^9\text{ sperm cells} (2.4×105 cells/mL×5000 mL=1.2×1092.4 \times 10^5\text{ cells/mL} \times 5000\text{ mL} = 1.2 \times 10^9). (c) Polyspermy blocks (membrane depolarization and cortical reaction) prevent multiple sperm of any origin from fertilizing a single egg of the same species to maintain euploidy, whereas gametic isolation is an evolutionary species barrier mediated by taxon-specific molecular recognition receptors that prevent heterospecific sperm fusion.

Steps

Part (a): Calculating the Cross-Fertilization Rate

The cross-fertilization rate represents the proportion of eggs from Species A successfully fertilized by heterospecific sperm (Species B).

  1. Identify the given values:

    • Number of successfully fertilized (cleaving) eggs = 55
    • Total number of cultured eggs = 250250
  2. Calculate the percentage: Cross-fertilization rate=Number of fertilized eggsTotal number of eggs×100%\text{Cross-fertilization rate} = \frac{\text{Number of fertilized eggs}}{\text{Total number of eggs}} \times 100\% Cross-fertilization rate=5250×100%=0.02×100%=2.0%\text{Cross-fertilization rate} = \frac{5}{250} \times 100\% = 0.02 \times 100\% = 2.0\%

Common Pitfall: Do not divide by the unfertilized eggs (245245). The denominator must always be the total initial pool of gametes tested (250250).


Part (b): Calculating Total Sperm Count in the Water Column

  1. Convert the total seawater volume from liters (L\text{L}) to milliliters (mL\text{mL}) so the units match the concentration: 5.0 L=5.0×103 mL=5000 mL5.0\text{ L} = 5.0 \times 10^3\text{ mL} = 5000\text{ mL}
  2. Multiply the sperm concentration of Species A by the total volume in mL\text{mL}: Total sperm=(2.4×105 cells/mL)×(5.0×103 mL)\text{Total sperm} = \left(2.4 \times 10^5\text{ cells/mL}\right) \times \left(5.0 \times 10^3\text{ mL}\right) Total sperm=(2.4×5.0)×105+3=12×108=1.2×109 sperm cells\text{Total sperm} = (2.4 \times 5.0) \times 10^{5 + 3} = 12 \times 10^8 = 1.2 \times 10^9\text{ sperm cells}

Part (c): Distinguishing Polyspermy Prevention from Gametic Isolation

While both mechanisms regulate sperm-egg interactions at the cell surface, their evolutionary functions and biological targets are entirely distinct:

  1. Gametic Isolation (Prezygotic Reproductive Barrier):

    • Role: Maintains species boundaries between different species (interspecific barrier).
    • Mechanism: Relies on complementary, species-specific molecular recognition proteins (such as bindin on sea urchin/sea star sperm heads and specific egg envelope glycoprotein receptors). When heterospecific sperm encounter an egg envelope, the incompatible molecular receptors fail to bind, preventing the acrosome reaction, penetration, or membrane fusion.
  2. Polyspermy Blocks (Ploidy Maintenance):

    • Role: Prevents multiple sperm from fertilizing a single egg (intraspecific regulation).
    • Mechanism: Triggered immediately after the first successful sperm-egg fusion to prevent lethal polyploidy and preserve normal diploidy (euploidy\text{euploidy}). This occurs via the fast block (rapid transient membrane depolarization via sodium ion influx) followed by the slow block (calcium-mediated exocytosis of cortical granules, which detaches other bound sperm and hardens the vitelline envelope into a fertilization envelope).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the unfertilized proportion rather than the fertilized rate in part (a).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    245250×100%=98%\frac{245}{250} \times 100\% = 98\%

    Correct

    5250×100%=2.0%\frac{5}{250} \times 100\% = 2.0\%

    You used the count of unfertilized eggs (245245) in the numerator instead of the successfully fertilized eggs showing cleavage (55).

  2. Step 2

    5.0 L=5000 mL  ⟹  2.4×105 cells/mL×5000 mL=1.2×109 cells5.0\text{ L} = 5000\text{ mL} \implies 2.4 \times 10^5\text{ cells/mL} \times 5000\text{ mL} = 1.2 \times 10^9\text{ cells}

  3. Step 3

    Polyspermy blocks stop multiple sperm of the same species from entering an egg, whereas gametic isolation prevents fertilization between distinct species due to incompatible receptor proteins.

WHAT YOU DID WELL
Compliments from Your Teacher

You performed the unit conversion from liters to milliliters correctly.

You expressed the final sperm calculation accurately in scientific notation.

You accurately identified the functional difference between polyspermy blocks and gametic isolation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Complementary Event Confusion

You substituted the count of unfertilized eggs (245245) rather than fertilized eggs (55) into the percentage formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the target event (successful cross-fertilization) with its complement (fertilization failure) when extracting values from the word problem.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Target Event
  • The rate of an event is favorable outcomestotal trials×100%\frac{\text{favorable outcomes}}{\text{total trials}} \times 100\%.

  • Always circle or write down the exact category requested (fertilized vs. unfertilized) before choosing your numerator.

Check Complementary Totals
  • Fertilization rate ++ unfertilized rate =100%= 100\%.

  • If your calculated cross-fertilization rate is high (98%98\%) in an experiment demonstrating reproductive isolation, pause to verify whether that number reflects success or failure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the number of eggs that successfully cleaved: 55 eggs.

  2. Divide by the total initial number of eggs: 5250=0.02\frac{5}{250} = 0.02.

  3. Multiply by 100%100\% to express as a percentage: 0.02×100%=2.0%0.02 \times 100\% = 2.0\%.

Final answer

(a) 2.0%2.0\%; (b) 1.2×109 sperm cells1.2 \times 10^9\text{ sperm cells}; (c) Polyspermy blocks prevent multiple sperm from entering a single egg of the same species to preserve euploidy, whereas gametic isolation prevents fertilization between different species due to molecular receptor incompatibility.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review whether a question asks for the success rate or the failure rate before plugging in numbers.

  • Sanity-check whether a high rate makes biological sense in the context of reproductive isolation barriers.

OverviewACEpath Teacher's Diagnosis

02 The student neglects to convert liters to milliliters when calculating the total number of sperm, underestimating the count by a factor of 1000 in part (b).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    5250×100%=2%\frac{5}{250} \times 100\% = 2\%

  2. Step 2

    Total sperm=2.4×105×5.0=1.2×106 cells\text{Total sperm} = 2.4 \times 10^5 \times 5.0 = 1.2 \times 10^6\text{ cells}

    Correct

    Total sperm=(2.4×105 cells/mL)×(5.0×103 mL)=1.2×109 cells\text{Total sperm} = (2.4 \times 10^5\text{ cells/mL}) \times (5.0 \times 10^3\text{ mL}) = 1.2 \times 10^9\text{ cells}

    You multiplied the sperm concentration in cells/mL\text{cells/mL} directly by the volume in liters (5.0 L5.0\text{ L}) without converting liters to milliliters (5.0 L=5000 mL5.0\text{ L} = 5000\text{ mL}).

  3. Step 3

    Polyspermy blocks prevent multiple sperm from entering the same egg, while gametic isolation acts as a barrier preventing cross-fertilization between different species.\text{Polyspermy blocks prevent multiple sperm from entering the same egg, while gametic isolation acts as a barrier preventing cross-fertilization between different species.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the cross-fertilization rate from the experimental gamete counts.

You clearly articulated the biological distinction between single-egg polyspermy prevention and interspecific gametic isolation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission

You performed the multiplication correctly for the numbers given, but skipped the volume unit conversion between L\text{L} and mL\text{mL}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inattention to dimensional matching between concentration (given per mL\text{mL}) and total volume (given in L\text{L}) before performing arithmetic.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Dimensional Units
  • Before multiplying a concentration by a total volume, ensure both quantities share the exact same volume unit (1 L=103 mL1\text{ L} = 10^3\text{ mL}).

  • Always write out units explicitly alongside numbers: cellsmL×mL=cells\frac{\text{cells}}{\text{mL}} \times \text{mL} = \text{cells}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 5.0 L5.0\text{ L} into milliliters: 5.0 L=5.0×103 mL5.0\text{ L} = 5.0 \times 10^3\text{ mL}.

  2. Multiply concentration by volume with matching units: (2.4×105 cells/mL)×(5.0×103 mL)=12×108 cells(2.4 \times 10^5\text{ cells/mL}) \times (5.0 \times 10^3\text{ mL}) = 12 \times 10^8\text{ cells}.

  3. Rewrite in proper scientific notation: 1.2×109 cells1.2 \times 10^9\text{ cells}.

Final answer

1.2×109 sperm cells1.2 \times 10^9\text{ sperm cells}

NEXT STEPS
Final Takeaways from Your Teacher
  • In multi-step biology word problems, circle all given units before calculating.

  • Practice tracking unit cancellations with dimensional analysis.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies polyspermy blocks as a postzygotic mechanism that destroys hybrid embryos rather than a fertilization barrier against multiple sperm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    5/250×100%=2%5 / 250 \times 100\% = 2\%

  2. Step 2

    5.0 L=5000 mL  ⟹  2.4×105 cells/mL×5000 mL=1.2×109 cells5.0\text{ L} = 5000\text{ mL} \implies 2.4 \times 10^5\text{ cells/mL} \times 5000\text{ mL} = 1.2 \times 10^9\text{ cells}

  3. Step 3

    Polyspermy blocks occur after fertilization to abort abnormal hybrid zygotes, whereas gametic isolation is a prezygotic barrier preventing sperm from binding to eggs of different species.

    Correct

    Polyspermy blocks (fast depolarization and slow cortical reaction) prevent multiple sperm from entering a single egg to ensure normal diploidy (euploidy), whereas gametic isolation is an interspecific prezygotic barrier where species-specific receptors prevent heterospecific sperm from fertilizing the egg.

    You confused polyspermy blocks with postzygotic hybrid inviability. Polyspermy prevention acts at the egg surface immediately upon first sperm fusion to stop additional sperm (whether conspecific or heterospecific) from entering, preventing lethal polyploidy rather than aborting hybrid zygotes.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the cross-fertilization rate accurately as 2%2\%.

You handled the metric volume conversion and scientific notation calculation flawlessly.

You correctly recognized that gametic isolation acts as a prezygotic barrier preventing interspecific sperm binding.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conceptual confusion between polyspermy blocks and postzygotic hybrid barriers

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated numerical regulation of gametes during fertilization (preventing polyploidy from multiple sperm) with evolutionary genetic barriers between taxa (preventing or aborting interspecific hybrids).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Polyspermy Block Function
  • Polyspermy blocks (fast electrical block and slow cortical granule reaction) prevent more than one sperm cell from entering a single egg, preserving diploidy (2n2n).

  • Associate 'polyspermy' with 'multiple sperm per egg' (number regulation), not with hybrid embryo abortion.

Distinguish Interspecific vs. Intraspecific Gamete Controls
  • Gametic isolation relies on species-specific surface proteins (e.g., bindin and egg envelope receptors) to reject heterospecific sperm before fertilization occurs.

  • Contrast species identity checks (gametic isolation) with ploidy protection checks (polyspermy blocks).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the primary function of polyspermy blocks: they prevent lethal polyploidy by blocking additional sperm entry via rapid membrane depolarization (fast block) and cortical granule exocytosis/fertilization envelope hardening (slow block).

  2. State the primary function of gametic isolation: it is a prezygotic barrier mediated by complementary, taxon-specific molecular recognition receptors on the egg and sperm that prevent fertilization between different species.

  3. Conclude that polyspermy prevention regulates sperm quantity to maintain euploidy, whereas gametic isolation regulates species identity.

Final answer

Polyspermy blocks prevent multiple sperm from penetrating a single egg to maintain normal diploidy (euploidy), whereas gametic isolation is an interspecific barrier mediated by species-specific surface recognition receptors that prevent heterospecific sperm from fertilizing the egg.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physiological mechanisms of the fast block (sodium influx / membrane depolarization) and the slow block (calcium wave / cortical reaction).

  • Contrast prezygotic gametic isolation with true postzygotic barriers such as hybrid inviability and hybrid sterility.

Lock it in

Similar question

01

In a laboratory hybridization experiment between two sea urchin species, 400 eggs of Strongylocentrotus purpuratus are exposed to sperm from Strongylocentrotus franciscanus. After incubation, 16 eggs undergo first cleavage, while 384 eggs show no fertilization envelope. Calculate the cross-fertilization rate as a percentage.

Answer

The cross-fertilization rate is 4.0%4.0\%. Key step: 16 fertilized eggs400 total eggs×100%=0.04×100%=4.0%\frac{16\text{ fertilized eggs}}{400\text{ total eggs}} \times 100\% = 0.04 \times 100\% = 4.0\%.

02

A marine biologist tests interspecific fertilization between two abalone species. A trial with 500 eggs results in an unfertilized rate of 97.6%97.6\%. How many individual eggs successfully formed a zygote and cleaved?

Answer

12 eggs successfully fertilized. Key step: The fertilization rate is 100%−97.6%=2.4%100\% - 97.6\% = 2.4\%. Then multiply total eggs by this rate: 500×0.024=12500 \times 0.024 = 12 eggs.

03

Two broadcast-spawning coral species release gametes simultaneously. In a 2.5 L2.5\text{ L} sample of seawater, Species X sperm concentration is 3.2×104 cells/mL3.2 \times 10^4\text{ cells/mL}. A researcher places 150 eggs of Species Y into a vial with 2.0 mL2.0\text{ mL} of Species X sperm at this concentration. If 3 eggs cleave into 2 cells, calculate: (1) the cross-fertilization rate, and (2) the total sperm count of Species X in the full 2.5 L2.5\text{ L} volume.

Answer

(1) Cross-fertilization rate =2.0%= 2.0\% (calculated as 3150×100%\frac{3}{150} \times 100\%). (2) Total sperm in water column =8.0×107 cells= 8.0 \times 10^7\text{ cells} (calculated as 2.5 L=2500 mL2.5\text{ L} = 2500\text{ mL}, and 3.2×104 cells/mL×2500 mL=8.0×107 cells3.2 \times 10^4\text{ cells/mL} \times 2500\text{ mL} = 8.0 \times 10^7\text{ cells}). Key step: Keep the fertilization success count as the numerator for part 1, and convert liters to milliliters before multiplying for part 2.

Loading workspace…