Resources

An ultra-long genomic DNA molecule containing Nbp=1.00×107 base pairsN_{\text{bp}} = 1.00 \times 10^7\text{ base pairs} is engineered such that the adenine base content asymptotically approaches its theoretical upper limit under canonical double-stranded base pairing: %A=49.99%\%\text{A} = 49.99\%. (a) Determine the percentage of guanine in this extreme-composition genome, (b) calculate the exact total number of guanine residues in the entire double helix, and (c) find the ratio of total hydrogen bonds (HtotalH_{\text{total}}) to total base pairs (NbpN_{\text{bp}}) in this duplex as %(G+C)→0\%(\text{G}+\text{C}) \to 0.

Answer and steps

Final answer

(a) 0.01% G0.01\%\text{ G}; (b) 2.00×103 guanine residues2.00 \times 10^3\text{ guanine residues}; (c) lim⁡%(G+C)→0HtotalNbp=2.00 hydrogen bonds per base pair\lim_{\%(\text{G}+\text{C}) \to 0} \frac{H_{\text{total}}}{N_{\text{bp}}} = 2.00\text{ hydrogen bonds per base pair} (current exact ratio: 2.00022.0002).

Steps

Part (a): Determining the Percentage of Guanine (%G\%\ce{G})

Canonical double-stranded DNA follows Chargaff's rules, which state that adenine (A\ce{A}) pairs exclusively with thymine (T\ce{T}), and guanine (G\ce{G}) pairs exclusively with cytosine (C\ce{C}):

%A=%Tand%G=%C\%\ce{A} = \%\ce{T} \quad \text{and} \quad \%\ce{G} = \%\ce{C}

The sum of all four canonical bases must equal 100%100\%:

%A+%T+%G+%C=100%\%\ce{A} + \%\ce{T} + \%\ce{G} + \%\ce{C} = 100\%

Given %A=49.99%\%\ce{A} = 49.99\%:

  1. %T=%A=49.99%\%\ce{T} = \%\ce{A} = 49.99\%
  2. The combined percentage of A+T\ce{A} + \ce{T} pairs is: %(A+T)=49.99%+49.99%=99.98%\%(\ce{A}+\ce{T}) = 49.99\% + 49.99\% = 99.98\%
  3. The remaining fraction constitutes the G+C\ce{G} + \ce{C} content: %(G+C)=100%−99.98%=0.02%\%(\ce{G}+\ce{C}) = 100\% - 99.98\% = 0.02\%
  4. Since %G=%C\%\ce{G} = \%\ce{C}, divide equally: %G=0.02%2=0.01%\%\ce{G} = \frac{0.02\%}{2} = 0.01\%

Part (b): Calculating the Total Number of Guanine Residues

A base pair consists of two complementary nucleotides (one on each strand of the double helix).

  1. Calculate the total number of individual nucleotide residues (NtotalN_{\text{total}}): Ntotal=2×Nbp=2×(1.00×107)=2.00×107 nucleotidesN_{\text{total}} = 2 \times N_{\text{bp}} = 2 \times (1.00 \times 10^7) = 2.00 \times 10^7\text{ nucleotides}
  2. Calculate the number of guanine residues (NGN_{\ce{G}}): NG=%G×Ntotal=(0.01100)×(2.00×107)=2.00×103 guanine residuesN_{\ce{G}} = \%\ce{G} \times N_{\text{total}} = \left(\frac{0.01}{100}\right) \times (2.00 \times 10^7) = 2.00 \times 10^3\text{ guanine residues}

Alternative Method & Common Pitfall: Each G–C\ce{G}\text{--}\ce{C} base pair contains exactly one guanine residue. The fraction of base pairs that are G–C\ce{G}\text{--}\ce{C} is equal to the fraction of bases that are (G+C)(\ce{G}+\ce{C}), which is 0.02%0.02\%. Thus, NG=0.02%×1.00×107=2.00×103N_{\ce{G}} = 0.02\% \times 1.00 \times 10^7 = 2.00 \times 10^3. A frequent mistake is taking 0.01%0.01\% directly of the base-pair count NbpN_{\text{bp}}, which incorrectly counts each base pair as only one nucleotide.


Part (c): Ratio of Total Hydrogen Bonds to Total Base Pairs

Canonical base pairs are stabilized by hydrogen bonds:

  • Each A–T\ce{A}\text{--}\ce{T} base pair contributes 22 hydrogen bonds.
  • Each G–C\ce{G}\text{--}\ce{C} base pair contributes 33 hydrogen bonds.

Let fATf_{\ce{AT}} and fGCf_{\ce{GC}} represent the fraction of total base pairs: fAT=%(A+T)100%=0.9998,fGC=%(G+C)100%=0.0002f_{\ce{AT}} = \frac{\%(\ce{A}+\ce{T})}{100\%} = 0.9998, \quad f_{\ce{GC}} = \frac{\%(\ce{G}+\ce{C})}{100\%} = 0.0002

The total number of hydrogen bonds (HtotalH_{\text{total}}) across the duplex is: Htotal=2⋅NAT+3⋅NGC=2(fAT⋅Nbp)+3(fGC⋅Nbp)H_{\text{total}} = 2 \cdot N_{\ce{AT}} + 3 \cdot N_{\ce{GC}} = 2(f_{\ce{AT}} \cdot N_{\text{bp}}) + 3(f_{\ce{GC}} \cdot N_{\text{bp}})

Dividing by the total number of base pairs (NbpN_{\text{bp}}): HtotalNbp=2fAT+3fGC=2(1−fGC)+3fGC=2+fGC\frac{H_{\text{total}}}{N_{\text{bp}}} = 2 f_{\ce{AT}} + 3 f_{\ce{GC}} = 2(1 - f_{\ce{GC}}) + 3 f_{\ce{GC}} = 2 + f_{\ce{GC}}

Taking the limit as the duplex approaches complete A–T\ce{A}\text{--}\ce{T} composition (%(G+C)→0\%(\ce{G}+\ce{C}) \to 0, meaning fGC→0f_{\ce{GC}} \to 0): lim⁡%(G+C)→0HtotalNbp=2.00 hydrogen bonds per base pair\lim_{\%(\ce{G}+\ce{C}) \to 0} \frac{H_{\text{total}}}{N_{\text{bp}}} = 2.00\text{ hydrogen bonds per base pair}

For this specific engineered duplex (fGC=0.0002f_{\ce{GC}} = 0.0002): HtotalNbp=2+0.0002=2.0002\frac{H_{\text{total}}}{N_{\text{bp}}} = 2 + 0.0002 = 2.0002

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the number of guanine residues using the number of base pairs rather than the total number of individual nucleotide residues.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    %T\text{T} = %A\text{A} = 49.99%   ⟹  \implies %(G\text{G} + C\text{C}) = 100% - 99.98% = 0.02%   ⟹  \implies %G\text{G} = 0.02%2\frac{0.02\%}{2} = 0.01%

  2. Step 2

    Total bases\text{Total bases} = 1.00 ×\times 10^7   ⟹  \implies G residues\text{G residues} = 0.0001 ×\times 1.00 ×\times 10^7 = 1000

    Correct

    N_{total\text{total}} = 2 ×\times N_{bp\text{bp}} = 2.00 ×\times 10^7   ⟹  \implies N_{G\text{G}} = 0.0001 ×\times (2.00 ×\times 10^7) = 2.00 ×\times 10^3_

    Because genomic DNA is a double-stranded helix, each base pair contains two individual nucleotide residues. You used Nbp=1.00×107N_{\text{bp}} = 1.00 \times 10^7 as the total nucleotide count rather than 2×1.00×107=2.00×1072 \times 1.00 \times 10^7 = 2.00 \times 10^7.

  3. Step 3

    A-T pairs have 2 H-bonds and G-C pairs have 3 H-bonds\text{A-T pairs have 2 H-bonds and G-C pairs have 3 H-bonds}   ⟹  \implies As \text{As } %(G\text{G}+C\text{C}) →\to 0, all pairs are A-T\text{, all pairs are A-T}   ⟹  \implies H_{total\text{total}} / N_{bp\text{bp}} = 2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Chargaff's parity rules to deduce the percentage of guanine from adenine content.

You accurately identified the number of hydrogen bonds contributed by each type of complementary base pair and correctly evaluated the asymptotic limit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating base pairs with total nucleotides

You substituted the number of base pairs directly into the formula for total nucleotides, which understated the residue count by half.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating base pairs (NbpN_{\text{bp}}) with total single-strand nucleotide residues (NtotalN_{\text{total}}) when applying base percentage compositions to double-stranded DNA.

REASONING PATH
Your ACEpath teacher’s suggested approach
Base Pairs vs. Nucleotides
  • In double-stranded DNA (dsDNA), each base pair consists of two complementary nucleotides: Ntotal=2×NbpN_{\text{total}} = 2 \times N_{\text{bp}}.

  • Always multiply the number of base pairs by 22 to obtain the total nucleotide pool before multiplying by a single-base percentage.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total number of single nucleotide residues: Ntotal=2×Nbp=2×(1.00×107)=2.00×107 nucleotidesN_{\text{total}} = 2 \times N_{\text{bp}} = 2 \times (1.00 \times 10^7) = 2.00 \times 10^7\text{ nucleotides}.

  2. Multiply the total nucleotide count by the fractional abundance of guanine: NG=0.0001×(2.00×107)=2.00×103 guanine residuesN_{\text{G}} = 0.0001 \times (2.00 \times 10^7) = 2.00 \times 10^3\text{ guanine residues}.

Final answer

(a) 0.01% G0.01\%\text{ G}; (b) 2.00×103 guanine residues2.00 \times 10^3\text{ guanine residues}; (c) lim⁡%(G+C)→0HtotalNbp=2.00 hydrogen bonds per base pair\lim_{\%(\text{G}+\text{C}) \to 0} \frac{H_{\text{total}}}{N_{\text{bp}}} = 2.00\text{ hydrogen bonds per base pair}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating the abundance of a specific base in double-stranded DNA, write down Ntotal=2×NbpN_{\text{total}} = 2 \times N_{\text{bp}} first to avoid using the base-pair count directly.

  • Alternatively, remember that each G–C\text{G}\text{--}\text{C} pair contributes exactly one G\text{G} residue, so NG=%(G+C)×Nbp=0.02%×1.00×107=2.00×103N_{\text{G}} = \%(\text{G}+\text{C}) \times N_{\text{bp}} = 0.02\% \times 1.00 \times 10^7 = 2.00 \times 10^3.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to divide the remaining percentage of G + C by 2, mistaking %(G + C) for %G.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    %T=%A=49.99%  ⟹  %A+%T=99.98%  ⟹  %G=100%−99.98%=0.02%\%\ce{T} = \%\ce{A} = 49.99\% \implies \%\ce{A} + \%\ce{T} = 99.98\% \implies \%\ce{G} = 100\% - 99.98\% = 0.02\%

    Correct

    %(G+C)=100%−99.98%=0.02%  ⟹  %G=0.02%2=0.01%\%(\ce{G}+\ce{C}) = 100\% - 99.98\% = 0.02\% \implies \%\ce{G} = \frac{0.02\%}{2} = 0.01\%

    The difference 100%−99.98%=0.02%100\% - 99.98\% = 0.02\% represents the total percentage of both guanine and cytosine combined (%(G+C)\%(\ce{G}+\ce{C})). Because %G=%C\%\ce{G} = \%\ce{C} in canonical double-stranded DNA, you must divide this remaining percentage by 22 to find %G=0.01%\%\ce{G} = 0.01\%.

  2. Step 2

    Total bases=2×1.00×107=2.00×107  ⟹  G residues=0.0002×2.00×107=4000\text{Total bases} = 2 \times 1.00 \times 10^7 = 2.00 \times 10^7 \implies \ce{G}\text{ residues} = 0.0002 \times 2.00 \times 10^7 = 4000

    Correct

    NG=0.01%×(2.00×107)=0.0001×(2.00×107)=2.00×103 guanine residuesN_{\ce{G}} = 0.01\% \times (2.00 \times 10^7) = 0.0001 \times (2.00 \times 10^7) = 2.00 \times 10^3\text{ guanine residues}

    Your conversion from base pairs to total nucleotides was correct, and your calculation followed your stated percentage. However, substituting %G=0.02%\%\ce{G} = 0.02\% instead of 0.01%0.01\% caused this value to be doubled.

  3. Step 3

    Each A–T pair has 2 H-bonds  ⟹  As %(G+C)→0,  Htotal→2×Nbp  ⟹  Htotal/Nbp=2\text{Each }\ce{A}\text{--}\ce{T}\text{ pair has } 2\text{ H-bonds} \implies \text{As } \%(\ce{G}+\ce{C}) \to 0,\; H_{\text{total}} \to 2 \times N_{\text{bp}} \implies H_{\text{total}} / N_{\text{bp}} = 2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Chargaff's rule to identify that %T=%A=49.99%\%\ce{T} = \%\ce{A} = 49.99\%.

You correctly recognized that a double helix of 1.00×107 bp1.00 \times 10^7\text{ bp} contains 2.00×1072.00 \times 10^7 total individual nucleotide bases.

You correctly established that each A–T\ce{A}\text{--}\ce{T} pair contributes 22 hydrogen bonds and concluded that the limiting ratio is 22.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating %G to %(G + C)

You equated the entire remaining percentage (100%−%(A+T)=0.02%100\% - \%(\ce{A}+\ce{T}) = 0.02\%) directly to guanine, omitting the division by 22 needed to share it equally with cytosine.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the combined pool percentage (%G+%C)(\%\ce{G} + \%\ce{C}) with the individual base percentage (%G)(\%\ce{G}) under Chargaff's rules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Partition the Base Complement Pool
  • In double-stranded DNA, %A+%T+%G+%C=100%\%\ce{A} + \%\ce{T} + \%\ce{G} + \%\ce{C} = 100\%, where %A=%T\%\ce{A} = \%\ce{T} and %G=%C\%\ce{G} = \%\ce{C}.

  • Always write %(G+C)=100%−2(%A)\%(\ce{G}+\ce{C}) = 100\% - 2(\%\ce{A}) as an explicit intermediate step before setting %G=%(G+C)2\%\ce{G} = \frac{\%(\ce{G}+\ce{C})}{2}.

Base Pairs vs. Single Bases
  • A duplex with NbpN_{\text{bp}} base pairs has 2Nbp2N_{\text{bp}} total bases, but exactly NbpN_{\text{bp}} base pairs.

  • To find residues of base X\ce{X}, compute either (%X)×(2Nbp)(\%\ce{X}) \times (2N_{\text{bp}}) or (%(X+partner))×Nbp(\%(\ce{X}+\text{partner})) \times N_{\text{bp}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the remaining base fraction: %(G+C)=100%−(49.99%+49.99%)=0.02%\%(\ce{G}+\ce{C}) = 100\% - (49.99\% + 49.99\%) = 0.02\%.

  2. Apply %G=%C\%\ce{G} = \%\ce{C} to split the pool: %G=0.02%2=0.01%\%\ce{G} = \frac{0.02\%}{2} = 0.01\%.

  3. Multiply the individual base frequency by total nucleotides: NG=(0.01100)×(2.00×107)=2.00×103 guanine residuesN_{\ce{G}} = \left(\frac{0.01}{100}\right) \times (2.00 \times 10^7) = 2.00 \times 10^3\text{ guanine residues}.

Final answer

(a) 0.01%G0.01\%\ce{ G}; (b) 2.00×103 guanine residues2.00 \times 10^3\text{ guanine residues}; (c) 2.00 hydrogen bonds per base pair2.00\text{ hydrogen bonds per base pair}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the three targeted flashcards on distinguishing base pairs from individual base frequencies.

  • Solve the three transfer exercises to practice calculating single-base abundances from base-pair totals.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the number of hydrogen bonds in A-T pairs with that in G-C pairs, believing A-T forms 3 hydrogen bonds.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    %T=%A=49.99%%(G+C)=100%−99.98%=0.02%%G=0.02%/2=0.01%\begin{aligned} \%\text{T} &= \%\text{A} = 49.99\% \\ \%(\text{G}+\text{C}) &= 100\% - 99.98\% = 0.02\% \\ \%\text{G} &= 0.02\% / 2 = 0.01\% \end{aligned}

  2. Step 2

    Total bases=2.00×107G residues=0.0001×2.00×107=2000\begin{aligned} \text{Total bases} &= 2.00 \times 10^7 \\ \text{G residues} &= 0.0001 \times 2.00 \times 10^7 = 2000 \end{aligned}

  3. Step 3

    A pairs with T using 3 hydrogen bonds  ⟹  As %(G+C)→0,  Htotal=3×Nbp  ⟹  HtotalNbp=3\text{A pairs with T using 3 hydrogen bonds} \implies \text{As } \%(\text{G}+\text{C}) \to 0,\; H_{\text{total}} = 3 \times N_{\text{bp}} \implies \frac{H_{\text{total}}}{N_{\text{bp}}} = 3

    Correct

    A pairs with T using 2 hydrogen bonds  ⟹  lim⁡%(G+C)→0HtotalNbp=2.00\text{A pairs with T using 2 hydrogen bonds} \implies \lim_{\%(\text{G}+\text{C}) \to 0} \frac{H_{\text{total}}}{N_{\text{bp}}} = 2.00

    An adenine-thymine (A–T\text{A--T}) base pair forms 22 hydrogen bonds, not 33. Guanine-cytosine (G–C\text{G--C}) pairs form 33 hydrogen bonds.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Chargaff's rules to find that the percentage of guanine is 0.01%0.01\%.

You accurately accounted for the two strands of the double helix to compute 2.00×1072.00 \times 10^7 total bases and 20002000 guanine residues.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Base pairing hydrogen bond count reversal

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the canonical Watson-Crick hydrogen bonding numbers, treating A–T\text{A--T} as having 33 hydrogen bonds and leaving G–C\text{G--C} with 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Watson-Crick Hydrogen Bonding
  • In canonical B-DNA, an A–T\text{A--T} base pair forms exactly 22 hydrogen bonds, while a G–C\text{G--C} base pair forms exactly 33 hydrogen bonds.

  • Associate the letter 'T' or 'two' with the two hydrogen bonds of A–T\text{A--T}, and remember that the stronger, higher-melting G–C\text{G--C} pair has three.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that canonical base pairing involves 22 hydrogen bonds between A\text{A} and T\text{T}, and 33 hydrogen bonds between G\text{G} and C\text{C}.

  2. Express the total hydrogen bonds per base pair as HtotalNbp=2fAT+3fGC=2+fGC\frac{H_{\text{total}}}{N_{\text{bp}}} = 2 f_{\text{AT}} + 3 f_{\text{GC}} = 2 + f_{\text{GC}}.

  3. Evaluate the limit as fGC=%(G+C)100%→0f_{\text{GC}} = \frac{\%(\text{G}+\text{C})}{100\%} \to 0 to get 2.002.00.

Final answer

lim⁡%(G+C)→0HtotalNbp=2.00\lim_{\%(\text{G}+\text{C}) \to 0} \frac{H_{\text{total}}}{N_{\text{bp}}} = 2.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the canonical base pairing hydrogen bond counts: A–T\text{A--T} has 22 hydrogen bonds, while G–C\text{G--C} has 33 hydrogen bonds.

  • Practice calculating duplex stability and melting temperature trends using the higher bond density of G–C\text{G--C} rich sequences.

Lock it in

Similar question

01

A double-stranded bacterial plasmid has a length of 4.50×103 base pairs4.50 \times 10^3\text{ base pairs} and a %C\%\text{C} content of 28.0%28.0\%. Calculate the total number of adenine residues in this plasmid.

Answer

1.98×103 adenine residues1.98 \times 10^3\text{ adenine residues}. Since %G=%C=28.0%\%\text{G} = \%\text{C} = 28.0\%, %(G+C)=56.0%\%(\text{G}+\text{C}) = 56.0\%, leaving %(A+T)=44.0%\%(\text{A}+\text{T}) = 44.0\% and %A=22.0%\%\text{A} = 22.0\%. Total nucleotides =2×4.50×103=9.00×103= 2 \times 4.50 \times 10^3 = 9.00 \times 10^3. Thus, NA=0.220×9.00×103=1980N_{\text{A}} = 0.220 \times 9.00 \times 10^3 = 1980.

02

A double-stranded viral DNA genome contains 1.20×105 base pairs1.20 \times 10^5\text{ base pairs} and has an overall (G+C)(\text{G}+\text{C}) content of 60.0%60.0\%. Determine (a) the total number of guanine residues and (b) the total number of hydrogen bonds in the duplex.

Answer

(a) 7.20×104 guanine residues7.20 \times 10^4\text{ guanine residues}; (b) 3.12×105 hydrogen bonds3.12 \times 10^5\text{ hydrogen bonds}. Total base pairs =1.20×105= 1.20 \times 10^5. Each G–C\text{G}\text{--}\text{C} pair contains 1 G1\text{ G}, so NG=0.60×1.20×105=7.20×104N_{\text{G}} = 0.60 \times 1.20 \times 10^5 = 7.20 \times 10^4. For hydrogen bonds: NGC=7.20×104N_{\text{GC}} = 7.20 \times 10^4 pairs (3 H-bonds3\text{ H-bonds} each) and NAT=0.40×1.20×105=4.80×104N_{\text{AT}} = 0.40 \times 1.20 \times 10^5 = 4.80 \times 10^4 pairs (2 H-bonds2\text{ H-bonds} each). Total H=3(7.20×104)+2(4.80×104)=2.16×105+9.60×104=3.12×105H = 3(7.20 \times 10^4) + 2(4.80 \times 10^4) = 2.16 \times 10^5 + 9.60 \times 10^4 = 3.12 \times 10^5.

03

An engineered synthetic duplex of Nbp=5.00×106 bpN_{\text{bp}} = 5.00 \times 10^6\text{ bp} has an average of 2.35 hydrogen bonds per base pair2.35\text{ hydrogen bonds per base pair}. Calculate the exact percentage of thymine (%T\%\text{T}) and the total number of thymine residues in the entire duplex.

Answer

%T=32.5%\%\text{T} = 32.5\% and NT=3.25×106 residuesN_{\text{T}} = 3.25 \times 10^6\text{ residues}. Let fGCf_{\text{GC}} be the fraction of G–C\text{G}\text{--}\text{C} pairs. Then HtotalNbp=2(1−fGC)+3fGC=2+fGC=2.35\frac{H_{\text{total}}}{N_{\text{bp}}} = 2(1 - f_{\text{GC}}) + 3f_{\text{GC}} = 2 + f_{\text{GC}} = 2.35, so fGC=0.35f_{\text{GC}} = 0.35 (35% G+C35\%\text{ G}+\text{C}). Therefore, %(A+T)=65%\%(\text{A}+\text{T}) = 65\%, giving %T=32.5%\%\text{T} = 32.5\%. Total nucleotides =2×5.00×106=1.00×107= 2 \times 5.00 \times 10^6 = 1.00 \times 10^7. Hence, NT=0.325×1.00×107=3.25×106N_{\text{T}} = 0.325 \times 1.00 \times 10^7 = 3.25 \times 10^6.

Loading workspace…