Resources

A working muscle cell consumes ATP\text{ATP} through myosin ATPase to drive actin filament sliding. During continuous aerobic exercise, the cellular oxidation of glucose releases −2870 kJ/mol-2870\text{ kJ/mol} of free energy under cellular conditions. The cell harnesses this catabolic flux to synthesize ATP\text{ATP} from ADP\text{ADP} and Pi\text{P}_i, which requires +50.5 kJ/mol+50.5\text{ kJ/mol} under actual intracellular physiological conditions. If a total of 32.0 moles of ATP32.0\text{ moles of ATP} are synthesized per mole of glucose completely oxidized to CO2\text{CO}_2 and H2O\text{H}_2\text{O}, calculate the thermodynamic efficiency (as a percentage, to three significant figures) of cellular respiration in conserving catabolic energy into the high-energy phosphoanhydride bonds of ATP\text{ATP}.

Answer and steps

Final answer

Efficiency=56.3%\text{Efficiency} = 56.3\%

Steps

01

Identify the Total Available Energy (Input)

During aerobic respiration, the complete catabolic oxidation of 1 mole1\text{ mole} of glucose releases free energy: ΔGglucose=−2870 kJ/mol\Delta G_{\text{glucose}} = -2870\text{ kJ/mol}

The total magnitude of energy released and available to drive cellular work is: Einput=2870 kJE_{\text{input}} = 2870\text{ kJ}

02

Calculate the Energy Conserved in ATP\text{ATP} (Useful Output)

Under physiological conditions inside the cell, synthesizing 1 mole1\text{ mole} of ATP\text{ATP} from ADP\text{ADP} and inorganic phosphate (Pi\text{P}_i) requires +50.5 kJ/mol+50.5\text{ kJ/mol}.

For 32.0 moles32.0\text{ moles} of ATP\text{ATP} generated per mole of oxidized glucose, the total useful chemical energy conserved in the phosphoanhydride bonds of ATP\text{ATP} is: Econserved=32.0 mol×50.5 kJ/mol=1616 kJE_{\text{conserved}} = 32.0\text{ mol} \times 50.5\text{ kJ/mol} = 1616\text{ kJ}

Common Pitfall: Do not use the standard biochemical free energy change (ΔG∘′=+30.5 kJ/mol\Delta G^{\circ\prime} = +30.5\text{ kJ/mol}) when actual intracellular physiological conditions (ΔG=+50.5 kJ/mol\Delta G = +50.5\text{ kJ/mol}) are provided. Intracellular reactant and product concentrations shift the actual free energy requirement significantly.

03

Determine the Thermodynamic Efficiency

The thermodynamic efficiency (η\eta) is the fraction of total catabolic energy converted into useful chemical potential energy, expressed as a percentage: Efficiency=EconservedEinput×100%\text{Efficiency} = \frac{E_{\text{conserved}}}{E_{\text{input}}} \times 100\%

Substitute the calculated values: Efficiency=1616 kJ2870 kJ×100%≈56.307%\text{Efficiency} = \frac{1616\text{ kJ}}{2870\text{ kJ}} \times 100\% \approx 56.307\%

Rounding to three significant figures gives: Efficiency=56.3%\text{Efficiency} = 56.3\%

The remaining 43.7%43.7\% (1254 kJ/mol1254\text{ kJ/mol}) is dissipated primarily as thermal energy (heat), which contributes to maintaining core body temperature during exercise.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the efficiency formula by dividing total input energy by conserved energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Energy in ATP=32.0×50.5=1616 kJ\text{Energy in ATP} = 32.0 \times 50.5 = 1616\text{ kJ}

  2. Step 2

    Efficiency=(28701616)×100%\text{Efficiency} = \left(\frac{2870}{1616}\right) \times 100\%

    Correct

    Efficiency=(1616 kJ2870 kJ)×100%\text{Efficiency} = \left(\frac{1616\text{ kJ}}{2870\text{ kJ}}\right) \times 100\%

    Thermodynamic efficiency is defined as Useful Output (Conserved Energy)Total Input Energy×100%\frac{\text{Useful Output (Conserved Energy)}}{\text{Total Input Energy}} \times 100\%. You inverted this fraction by placing input energy (2870 kJ2870\text{ kJ}) over conserved output energy (1616 kJ1616\text{ kJ}).

  3. Step 3

    Efficiency=178%\text{Efficiency} = 178\%

    Correct

    Efficiency≈56.3%\text{Efficiency} \approx 56.3\%

    Because the fraction was inverted in the previous step, your final value exceeded 100%100\%, which would violate the laws of thermodynamics.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the physiological free energy change of ATP\text{ATP} synthesis (+50.5 kJ/mol+50.5\text{ kJ/mol}) and calculated the total conserved energy as 1616 kJ1616\text{ kJ}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted efficiency ratio

You accidentally placed the larger total input energy in the numerator rather than dividing the conserved energy by the input energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the numerator and denominator in the efficiency formula η=EusefulEtotal\eta = \frac{E_{\text{useful}}}{E_{\text{total}}}, combined with overlooking the physical boundary condition that thermodynamic efficiency for a passive energy transduction process cannot exceed 100%100\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Efficiency Ratio Structure
  • Efficiency measures the fraction of input energy successfully captured: η=EoutputEinput×100%\eta = \frac{E_{\text{output}}}{E_{\text{input}}} \times 100\%.

  • Always identify the useful energy captured as the numerator and the total energy released by the fuel as the denominator.

Thermodynamic Sanity Check
  • Real biological energy conversions lose energy as heat (entropy increases), so η<100%\eta < 100\%.

  • If your calculated efficiency is greater than 100%100\%, check immediately whether your fraction is upside down.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the useful conserved chemical energy (1616 kJ1616\text{ kJ}) by the total available input energy (2870 kJ2870\text{ kJ}): Efficiency=1616 kJ2870 kJ×100%\text{Efficiency} = \frac{1616\text{ kJ}}{2870\text{ kJ}} \times 100\%

  2. Evaluate the quotient: 16162870≈0.56307\frac{1616}{2870} \approx 0.56307

  3. Express the result as a percentage rounded to three significant figures: 56.3%56.3\%

Final answer

Efficiency=56.3%\text{Efficiency} = 56.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the standard definition of energy efficiency (useful output over total input).

  • Apply a boundary check (result must be between 0%0\% and 100%100\%) on all biological energy conversion problems.

OverviewACEpath Teacher's Diagnosis

02 The student uses standard biochemical free energy of ATP synthesis (30.5 kJ/mol) instead of the actual cellular value given in the problem.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Energy conserved=32.0×30.5=976 kJ\text{Energy conserved} = 32.0 \times 30.5 = 976\text{ kJ}

    Correct

    Energy conserved=32.0 mol×50.5 kJ/mol=1616 kJ\text{Energy conserved} = 32.0\text{ mol} \times 50.5\text{ kJ/mol} = 1616\text{ kJ}

    You substituted the standard biochemical value ΔG∘′=+30.5 kJ/mol\Delta G^{\circ\prime} = +30.5\text{ kJ/mol} rather than the actual cellular value of +50.5 kJ/mol+50.5\text{ kJ/mol} given in the prompt.

  2. Step 2

    Efficiency=(9762870)×100%  ⟹  Efficiency=34.0%\text{Efficiency} = \left(\frac{976}{2870}\right) \times 100\% \implies \text{Efficiency} = 34.0\%

    Correct

    Efficiency=(1616 kJ2870 kJ)×100%=56.3%\text{Efficiency} = \left(\frac{1616\text{ kJ}}{2870\text{ kJ}}\right) \times 100\% = 56.3\%

    Your efficiency ratio formula and computation were carried out properly, but this result inherits the value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the efficiency equation as useful energy conserved divided by total catabolic energy released.

You correctly multiplied the total moles of ATP produced by an energy per mole value.

You rounded your final calculated percentage to three significant figures correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Standard vs. Physiological Conditions Misuse

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defaulted to memorizing the textbook standard biochemical free energy of ATP hydrolysis/synthesis (ΔG∘′=30.5 kJ/mol\Delta G^{\circ\prime} = 30.5\text{ kJ/mol}) instead of using the actual intracellular free energy change (ΔG=50.5 kJ/mol\Delta G = 50.5\text{ kJ/mol}) explicitly stated in the problem.

REASONING PATH
Your ACEpath teacher’s suggested approach
Actual Intracellular Free Energy
  • Thermodynamic calculations under cellular conditions must use the actual intracellular free energy (ΔG\Delta G), which accounts for physiological reactant and product concentrations, not the standard transformed free energy (ΔG∘′\Delta G^{\circ\prime}).

  • Always check whether the problem specifies an actual intracellular or physiological ΔG\Delta G before defaulting to standard constants like 30.5 kJ/mol30.5\text{ kJ/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate conserved energy using actual physiological ΔG\Delta G: Econserved=32.0 mol×50.5 kJ/mol=1616 kJE_{\text{conserved}} = 32.0\text{ mol} \times 50.5\text{ kJ/mol} = 1616\text{ kJ}.

  2. Substitute into the thermodynamic efficiency formula: Efficiency=(1616 kJ2870 kJ)×100%\text{Efficiency} = \left(\frac{1616\text{ kJ}}{2870\text{ kJ}}\right) \times 100\%.

  3. Evaluate and round to three significant figures: 56.307%≈56.3%56.307\% \approx 56.3\%.

Final answer

Efficiency=56.3%\text{Efficiency} = 56.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mathematical difference between standard free energy change ΔG∘′\Delta G^{\circ\prime} and actual physiological free energy change ΔG=ΔG∘′+RTln⁡Q\Delta G = \Delta G^{\circ\prime} + RT\ln Q.

  • Practice highlighting given numerical conditions in the problem text before writing down memorized textbook values.

OverviewACEpath Teacher's Diagnosis

03 The student omits the ATP yield multiplier and calculates efficiency using only a single mole of ATP per mole of glucose.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Energy conserved=50.5 kJ\text{Energy conserved} = 50.5\text{ kJ}

    Correct

    Energy conserved=32.0 mol×50.5 kJ/mol=1616 kJ\text{Energy conserved} = 32.0\text{ mol} \times 50.5\text{ kJ/mol} = 1616\text{ kJ}

    You used the energy required to synthesize just one mole of ATP\text{ATP} (50.5 kJ50.5\text{ kJ}) as the total conserved energy, omitting the stoichiometric factor of 32.0 moles of ATP32.0\text{ moles of ATP} produced per mole of glucose.

  2. Step 2

    Efficiency=(50.52870)×100%  ⟹  Efficiency=1.76%\text{Efficiency} = \left(\frac{50.5}{2870}\right) \times 100\% \implies \text{Efficiency} = 1.76\%

    Correct

    Efficiency=(1616 kJ2870 kJ)×100%≈56.3%\text{Efficiency} = \left(\frac{1616\text{ kJ}}{2870\text{ kJ}}\right) \times 100\% \approx 56.3\%

    Your division and percentage calculation followed logically from your previous step, but the final numerical value was affected by using 50.5 kJ50.5\text{ kJ} instead of 1616 kJ1616\text{ kJ} in the numerator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that thermodynamic efficiency is defined as useful energy conserved divided by total catabolic energy input.

You correctly identified the total catabolic input energy as 2870 kJ/mol2870\text{ kJ/mol} from glucose oxidation.

You correctly converted your fraction to a percentage to three significant figures based on your numerator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Stoichiometric Yield

You set the numerator to the energy of forming one mole of ATP\text{ATP} rather than scaling it by the overall reaction yield of 32.0 moles32.0\text{ moles}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the molar free energy requirement of a single ATP\text{ATP} synthesis event as the total energy output of the entire pathway, forgetting to multiply by the pathway's molar stoichiometry (nATP=32.0n_{\text{ATP}} = 32.0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Energy Scaling
  • Total useful energy stored in coupled metabolism equals (moles of product formed)×(ΔG per mole of product)(\text{moles of product formed}) \times (\Delta G\text{ per mole of product}).

  • Before computing efficiency ratios, check that both the input and output energies correspond to the exact same basis (1 mole of glucose oxidized).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the molar energy of ATP\text{ATP} synthesis by the pathway yield: Econserved=32.0 mol×50.5 kJ/mol=1616 kJE_{\text{conserved}} = 32.0\text{ mol} \times 50.5\text{ kJ/mol} = 1616\text{ kJ}.

  2. Substitute 1616 kJ1616\text{ kJ} and the total input energy 2870 kJ2870\text{ kJ} into the efficiency formula: Efficiency=1616 kJ2870 kJ×100%\text{Efficiency} = \frac{1616\text{ kJ}}{2870\text{ kJ}} \times 100\%.

  3. Evaluate the quotient and round to three significant figures: 56.3%56.3\%.

Final answer

Efficiency=56.3%\text{Efficiency} = 56.3\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check stoichiometric coefficients in energy conservation problems to ensure product amounts are fully scaled.

  • Verify that both numerator and denominator share matching units and reference quantities (e.g., both per mole of fuel oxidized).

  • Perform a sanity check: biological respiration typically conserves 30–60%30\text{--}60\% of glucose energy, so a value around 1–2%1\text{--}2\% should alert you to a missing multiplier.

Lock it in

Similar question

01

Under standard biochemical conditions, the hydrolysis of one mole of ATP\text{ATP} releases −30.5 kJ/mol-30.5\text{ kJ/mol}, and the complete combustion of glucose releases −2870 kJ/mol-2870\text{ kJ/mol}. If a cell synthesizes 30.0 moles of ATP30.0\text{ moles of ATP} per mole of glucose under these standard conditions, what is the thermodynamic efficiency of respiration to three significant figures?

Answer

Efficiency=31.9%\text{Efficiency} = 31.9\%. Total conserved energy = 30.0 mol×30.5 kJ/mol=915 kJ30.0\text{ mol} \times 30.5\text{ kJ/mol} = 915\text{ kJ}. Efficiency=915 kJ2870 kJ×100%≈31.88%≈31.9%\text{Efficiency} = \frac{915\text{ kJ}}{2870\text{ kJ}} \times 100\% \approx 31.88\% \approx 31.9\%.

02

During anaerobic glycolysis in human muscle, one mole of glucose is broken down to two moles of lactate, releasing −196 kJ/mol-196\text{ kJ/mol} of free energy. If 2.00 moles of ATP2.00\text{ moles of ATP} are synthesized per mole of glucose, requiring +50.5 kJ/mol+50.5\text{ kJ/mol} under intracellular conditions, calculate the thermodynamic efficiency of anaerobic glycolysis to three significant figures.

Answer

Efficiency=51.5%\text{Efficiency} = 51.5\%. Energy conserved in ATP=2.00 mol×50.5 kJ/mol=101 kJ\text{ATP} = 2.00\text{ mol} \times 50.5\text{ kJ/mol} = 101\text{ kJ}. Efficiency=101 kJ196 kJ×100%≈51.53%≈51.5%\text{Efficiency} = \frac{101\text{ kJ}}{196\text{ kJ}} \times 100\% \approx 51.53\% \approx 51.5\%.

03

Palmitate oxidation yields −9780 kJ/mol-9780\text{ kJ/mol} of free energy and generates 106 moles of ATP106\text{ moles of ATP}. If the actual cellular free energy required to synthesize ATP\text{ATP} is +51.0 kJ/mol+51.0\text{ kJ/mol}, calculate: (a) the total energy conserved in ATP\text{ATP}, and (b) the percentage of input energy dissipated as metabolic heat (both to three significant figures).

Answer

(a) Econserved=106 mol×51.0 kJ/mol=5406 kJ=5.41×103 kJE_{\text{conserved}} = 106\text{ mol} \times 51.0\text{ kJ/mol} = 5406\text{ kJ} = 5.41 \times 10^3\text{ kJ}. (b) Heat dissipated =44.7%= 44.7\%. Efficiency=54069780×100%≈55.28%≈55.3%\text{Efficiency} = \frac{5406}{9780} \times 100\% \approx 55.28\% \approx 55.3\%. Heat percentage =100%−55.28%≈44.72%≈44.7%= 100\% - 55.28\% \approx 44.72\% \approx 44.7\%.

Loading workspace…