Resources

An investigator compares water transport capacities in a woody angiosperm stem. In cross-section, a cluster of 8080 protoxylem tracheary elements each possesses an average lumen radius of r1=12.0 μmr_1 = 12.0\text{ }\mu\text{m}, while an adjacent secondary xylem vessel element possesses a lumen radius of r2=48.0 μmr_2 = 48.0\text{ }\mu\text{m}. Assuming laminar volumetric fluid flow governed by the Hagen-Poiseuille relationship (Jv∝r4J_v \propto r^4) under identical pressure gradients, calculate the ratio of the volume flow rate through the single secondary xylem vessel to the total aggregate volume flow rate through the 8080 smaller protoxylem elements combined.

Answer and steps

Final answer

Jv,vesselJv,aggregate=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = 3.20 (the single vessel conducts 3.203.20 times the total volume flow rate of all 8080 smaller tracheary elements combined).

Steps

01

Compare Flow Between Single Elements

Understanding the Flow Relationship

According to the Hagen-Poiseuille law, for laminar fluid flow driven by a constant pressure gradient through a cylindrical conduit, the volumetric flow rate (JvJ_v) is proportional to the fourth power of the conduit's lumen radius (rr): Jv∝r4J_v \propto r^4 This fourth-power dependence means that even a modest increase in lumen diameter dramatically increases hydraulic conductance.

First, find the ratio of the radius of the secondary xylem vessel element (r2r_2) to that of a single protoxylem element (r1r_1):

r2r1=48.0 μm12.0 μm=4.0\frac{r_2}{r_1} = \frac{48.0\text{ }\mu\text{m}}{12.0\text{ }\mu\text{m}} = 4.0

Under identical pressure gradients, the ratio of the volumetric flow rate through a single large vessel (Jv,vesselJ_{v,\text{vessel}}) to the flow rate through a single protoxylem element (Jv,1J_{v,1}) is:

Jv,vesselJv,1=(r2r1)4=44=256\frac{J_{v,\text{vessel}}}{J_{v,1}} = \left(\frac{r_2}{r_1}\right)^4 = 4^4 = 256

A single vessel element conducts 256256 times more fluid than a single protoxylem element of one-fourth its radius.


02

Determine Aggregate Flow of the Protoxylem Elements

The protoxylem consists of N=80N = 80 identical elements operating in parallel. The aggregate flow rate (Jv,aggregateJ_{v,\text{aggregate}}) is the sum of their individual flows:

Jv,aggregate=80⋅Jv,1J_{v,\text{aggregate}} = 80 \cdot J_{v,1}


03

Calculate the Final Ratio

Now, compute the ratio of the flow through the single secondary xylem vessel to the combined flow of all 8080 protoxylem elements:

Jv,vesselJv,aggregate=Jv,vessel80⋅Jv,1=256⋅Jv,180⋅Jv,1=25680=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = \frac{J_{v,\text{vessel}}}{80 \cdot J_{v,1}} = \frac{256 \cdot J_{v,1}}{80 \cdot J_{v,1}} = \frac{256}{80} = 3.20

Common Pitfall: A frequent mistake is scaling flow proportionally to cross-sectional area (∝r2\propto r^2) rather than radius to the fourth power (∝r4\propto r^4). Area scaling yields (4)2=16(4)^2 = 16, which would lead to an incorrect flow ratio of 1680=0.20\frac{16}{80} = 0.20. Because fluid velocity also increases with wider conduit diameter due to reduced friction along the conduit wall, Hagen-Poiseuille flow always scales with r4r^4.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student scales volumetric flow rate linearly with radius rather than with the fourth power, yielding a ratio of 0.05.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Flow rate is proportional to radius: Jv∝r\text{Flow rate is proportional to radius: } J_v \propto r

    Correct

    Jv∝r4J_v \propto r^4

    The problem states that laminar volume flow rate is governed by the Hagen-Poiseuille relationship, where volumetric flow rate is proportional to the fourth power of the lumen radius (Jv∝r4J_v \propto r^4), not directly to radius (rr).

  2. Step 2

    Ratio=r280×r1\text{Ratio} = \frac{r_2}{80 \times r_1}

    Correct

    Ratio=r2480×r14=180(r2r1)4\text{Ratio} = \frac{r_2^4}{80 \times r_1^4} = \frac{1}{80}\left(\frac{r_2}{r_1}\right)^4

    Because flow scales with the fourth power of conduit radius, the ratio of flow rates requires raising each radius to the fourth power rather than using their first powers.

  3. Step 3

    Ratio=4880×12=480=0.05\text{Ratio} = \frac{48}{80 \times 12} = \frac{4}{80} = 0.05

    Correct

    Ratio=48480×124=4480=25680=3.20\text{Ratio} = \frac{48^4}{80 \times 12^4} = \frac{4^4}{80} = \frac{256}{80} = 3.20

    Substituting the values with the fourth-power scaling yields a final flow ratio of 3.203.20 rather than 0.050.05.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the comparison between the single secondary xylem vessel and the sum of the 8080 protoxylem tracheary elements.

You correctly simplified the radius ratio 4812=4\frac{48}{12} = 4.

You carried out the arithmetic steps accurately based on your chosen formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling misconception in fluid dynamics

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed a linear relationship between conduit radius and fluid volume flow rate, overlooking the fourth-power dependence (Jv∝r4J_v \propto r^4) established by the Hagen-Poiseuille law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conduit Radius and Flow Scaling
  • In cylindrical vessels under laminar flow, volumetric flow rate scales with the fourth power of lumen radius: Jv∝r4J_v \propto r^4.

  • Always apply an exponent of 44 to conduit radii when comparing laminar flow rates under identical pressure gradients.

Parallel Conduit Aggregation
  • Total volumetric flow through NN identical parallel conduits is Jv,total=N⋅Jv,1∝N⋅r14J_{v,\text{total}} = N \cdot J_{v,1} \propto N \cdot r_1^4.

  • Combine parallel conduits by multiplying the single-conduit fourth-power term by the total number of conduits NN.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the Hagen-Poiseuille relationship: Jv∝r4J_v \propto r^4.

  2. Compute the single-element flow ratio: Jv,vesselJv,1=(r2r1)4=(48.012.0)4=44=256\frac{J_{v,\text{vessel}}}{J_{v,1}} = \left(\frac{r_2}{r_1}\right)^4 = \left(\frac{48.0}{12.0}\right)^4 = 4^4 = 256.

  3. Divide by the 8080 parallel protoxylem elements: Ratio=25680=3.20\text{Ratio} = \frac{256}{80} = 3.20.

Final answer

Jv,vesselJv,aggregate=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = 3.20

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why wider conduits decrease drag along the vessel walls, causing average fluid velocity to scale with r2r^2 and total flow rate to scale with r4r^4.

  • Practice problems that distinguish between cross-sectional area scaling (r2r^2) and Hagen-Poiseuille volume flow scaling (r4r^4).

OverviewACEpath Teacher's Diagnosis

02 The student scales flow rate with cross-sectional area (r²) instead of the fourth power of the radius, obtaining a ratio of 0.2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Flow rate is proportional to area: Jv∝r2J_v \propto r^2

    Correct

    By the Hagen-Poiseuille relationship given in the problem, volumetric flow rate scales with the fourth power of radius: Jv∝r4J_v \propto r^4

    You treated volumetric flow rate as proportional to cross-sectional area (r2r^2). For laminar pipe flow under a constant pressure gradient, fluid velocity also increases toward the center due to reduced viscous wall drag, causing total volume flow to scale with r4r^4 rather than r2r^2.

  2. Step 2

    r2r1=4812=4\frac{r_2}{r_1} = \frac{48}{12} = 4

  3. Step 3

    Ratio=4280=1680=0.2\text{Ratio} = \frac{4^2}{80} = \frac{16}{80} = 0.2

    Correct

    Jv,vesselJv,aggregate=4480=25680=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = \frac{4^4}{80} = \frac{256}{80} = 3.20

    You correctly divided the relative flow of the single vessel by the 8080 parallel elements, but your result was affected by raising the radius ratio to the power of 22 instead of 44.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated that the radius of the secondary vessel element is 44 times larger than that of a protoxylem element.

You correctly accounted for the 8080 parallel protoxylem conduits in the denominator of the aggregate ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Proportionality Exponent Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated cross-sectional conduit area (A∝r2A \propto r^2) with Hagen-Poiseuille volumetric flow rate (Jv∝r4J_v \propto r^4), missing that laminar flow velocity itself increases with lumen radius.

REASONING PATH
Your ACEpath teacher’s suggested approach
Hagen-Poiseuille Law Scaling
  • For laminar fluid flow driven by a fixed pressure gradient, volumetric flow rate satisfies Jv∝r4J_v \propto r^4.

  • Check the power dependence specified in the prompt: raise the conduit radius ratio to the fourth power (44=2564^4 = 256), not the second power (42=164^2 = 16).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the Hagen-Poiseuille proportionality Jv∝r4J_v \propto r^4 to find the single-element flow ratio: Jv,vesselJv,1=(r2r1)4=44=256\frac{J_{v,\text{vessel}}}{J_{v,1}} = \left(\frac{r_2}{r_1}\right)^4 = 4^4 = 256.

  2. Sum the flow of the 8080 parallel protoxylem conduits: Jv,aggregate=80⋅Jv,1J_{v,\text{aggregate}} = 80 \cdot J_{v,1}.

  3. Compute the ratio: Jv,vesselJv,aggregate=25680=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = \frac{256}{80} = 3.20.

Final answer

3.203.20

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical reason why Hagen-Poiseuille flow scales with r4r^4: flow equals average velocity times area, and average velocity also scales with r2r^2.

  • Practice identifying whether a transport problem assumes constant fluid velocity (Q∝r2Q \propto r^2) or pressure-driven laminar flow (Q∝r4Q \propto r^4).

OverviewACEpath Teacher's Diagnosis

03 The student correctly calculates the single vessel to protoxylem vessel ratio as 256, but forgets to divide by the 80 elements to account for the aggregate flow.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Jv∝r4  ⟹  r2r1=4812=4J_v \propto r^4 \implies \frac{r_2}{r_1} = \frac{48}{12} = 4

  2. Step 2

    Ratio=(r2r1)4=44=256\text{Ratio} = \left(\frac{r_2}{r_1}\right)^4 = 4^4 = 256

    Correct

    Jv,vesselJv,aggregate=180(r2r1)4=25680=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = \frac{1}{80}\left(\frac{r_2}{r_1}\right)^4 = \frac{256}{80} = 3.20

    Your value of 256256 represents the flow ratio between a single large vessel and a single small element. To find the ratio compared to the total aggregate flow, you must divide this value by the 8080 protoxylem elements operating in parallel.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that volumetric flow rate scales with the fourth power of conduit radius (Jv∝r4J_v \propto r^4).

You calculated the radius ratio between the two vessel types accurately as 44.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of parallel conduit aggregation

You calculated the flow ratio for one vessel versus one tracheary element instead of dividing by the 8080 elements operating in parallel.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating individual conduit conductance with aggregate vascular bundle conductance when multiple conduits conduct fluid in parallel.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aggregate Flow in Parallel Conduits
  • For NN identical parallel conduits under the same pressure gradient, total flow is the sum of individual flows: Jv,aggregate=N⋅Jv,1J_{v,\text{aggregate}} = N \cdot J_{v,1}.

  • Identify whether the comparison asks for a single conduit or an aggregate group, and multiply or divide by the conduit count NN accordingly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the aggregate flow of all 8080 protoxylem elements: Jv,aggregate=80⋅Jv,1J_{v,\text{aggregate}} = 80 \cdot J_{v,1}.

  2. Form the ratio of the single secondary vessel flow to the aggregate protoxylem flow: Jv,vesselJv,aggregate=256⋅Jv,180⋅Jv,1\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = \frac{256 \cdot J_{v,1}}{80 \cdot J_{v,1}}.

  3. Simplify the fraction: 25680=3.20\frac{256}{80} = 3.20.

Final answer

Jv,vesselJv,aggregate=3.20\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = 3.20

NEXT STEPS
Final Takeaways from Your Teacher
  • Always underline or highlight whether the prompt specifies an individual conduit or an aggregate/total cluster of conduits.

  • Check your final step by verifying whether the units or conduit counts match both sides of the ratio.

Lock it in

Similar question

01

A plant physiologist compares two xylem vessels under identical pressure gradients. Vessel A has a lumen radius of 20 μm20\text{ }\mu\text{m}, while Vessel B has a lumen radius of 40 μm40\text{ }\mu\text{m}. Calculate the ratio of the volume flow rate in Vessel B to that in Vessel A (Jv,BJv,A\frac{J_{v,B}}{J_{v,A}}).

Answer

Jv,BJv,A=(rBrA)4=(4020)4=24=16\frac{J_{v,B}}{J_{v,A}} = \left(\frac{r_B}{r_A}\right)^4 = \left(\frac{40}{20}\right)^4 = 2^4 = 16.

02

In a conifer stem, water flows through an array of 5050 narrow tracheids, each with radius r1=8.0 μmr_1 = 8.0\text{ }\mu\text{m}. An adjacent angiosperm vessel has radius r2=24.0 μmr_2 = 24.0\text{ }\mu\text{m}. Assuming identical pressure gradients, calculate the ratio of the volume flow rate of the single vessel to the aggregate volume flow rate of all 5050 tracheids combined.

Answer

Ratio of single elements: (24.08.0)4=34=81\left(\frac{24.0}{8.0}\right)^4 = 3^4 = 81. Aggregate ratio: Jv,vesselJv,aggregate=8150=1.62\frac{J_{v,\text{vessel}}}{J_{v,\text{aggregate}}} = \frac{81}{50} = 1.62.

03

An intact ring of secondary xylem consists of 2020 large vessels of radius rL=50 μmr_L = 50\text{ }\mu\text{m}. Cavitation permanently embolizes all 2020 large vessels, forcing water into 500500 functioning narrow vessels of radius rS=25 μmr_S = 25\text{ }\mu\text{m}. What fraction of the original total volumetric flow capacity remains under the same pressure gradient?

Answer

Flow capacity scales as ∑r4\sum r^4. Original capacity: 20×504=20×6,250,000=125,000,000 μm420 \times 50^4 = 20 \times 6{,}250{,}000 = 125{,}000{,}000\text{ }\mu\text{m}^4. Remaining capacity: 500×254=500×390,625=195,312,500 μm4500 \times 25^4 = 500 \times 390{,}625 = 195{,}312{,}500\text{ }\mu\text{m}^4. Fraction remaining: 195,312,500125,000,000=500×120×24=500320=1.5625\frac{195{,}312{,}500}{125{,}000{,}000} = \frac{500 \times 1}{20 \times 2^4} = \frac{500}{320} = 1.5625 (or 2516\frac{25}{16}, approximately 156.25%156.25\%).

Loading workspace…