Resources

In a cell biology laboratory exercise, liver tissue is mechanically homogenized and subjected to differential centrifugation at four sequential rotational speeds and durations: (1) 1,000×g1{,}000 \times g for 10 min10\text{ min}, (2) 20,000×g20{,}000 \times g for 20 min20\text{ min}, (3) 100,000×g100{,}000 \times g for 60 min60\text{ min}, and (4) the remaining post-100,000×g100{,}000 \times g supernatant is harvested. Enzymatic assays are conducted on each fraction: Cytochrome c oxidase activity (mitochondrial marker), catalase activity (peroxisomal marker), glucose-6-phosphatase activity (microsomal/ER marker), and lactate dehydrogenase activity (cytosolic marker). Identify which specific cellular organelle or structure sediments in Pellet 1, Pellet 2, Pellet 3, and remains in the final Supernatant.

Answer and steps

Final answer

Pellet 1 (1,000×g1{,}000 \times g): Nuclei and unbroken cells; Pellet 2 (20,000×g20{,}000 \times g): Mitochondria, lysosomes, and peroxisomes; Pellet 3 (100,000×g100{,}000 \times g): Microsomes (fragments of endoplasmic reticulum) and small vesicles; Supernatant: Soluble cytosol (containing soluble enzymes like lactate dehydrogenase) and free ribosomes.

Steps

Principle of Differential Centrifugation

Differential centrifugation separates cellular components based on differences in their size, mass, and density. When homogenized cell suspension is spun in a centrifuge:

  • Larger and denser organelles experience a greater sedimentation velocity at lower centrifugal accelerations (gg-force) and shorter run times.
  • Smaller and lighter components remain in the liquid supernatant until subjected to progressively higher speeds and longer durations.

Step-by-Step Fractionation Analysis

  1. Pellet 1: Low-Speed Centrifugation (1,000×g1{,}000 \times g for 10 min10\text{ min})

    • Sedimented components: Nuclei and unbroken (whole) cells, along with large sheets of plasma membrane and heavy cellular debris.
    • Reasoning: The nucleus is the largest and heaviest organelle in the cell (typically 5–10 μm5\text{--}10\ \mu\text{m} in diameter). It readily pellets out at relatively low gravitational forces.
  2. Pellet 2: Medium-Speed Centrifugation (20,000×g20{,}000 \times g for 20 min20\text{ min})

    • Sedimented components: Mitochondria, lysosomes, and peroxisomes.
    • Reasoning: These are intermediate-sized organelles (0.5–2 μm0.5\text{--}2\ \mu\text{m}).
    • Enzyme Markers: The presence of cytochrome c oxidase confirms the enrichment of mitochondria (an enzyme of the inner mitochondrial membrane), and catalase confirms the presence of peroxisomes.
  3. Pellet 3: High-Speed Ultracentrifugation (100,000×g100{,}000 \times g for 60 min60\text{ min})

    • Sedimented components: Microsomes (sheared fragments and vesicles derived from the rough and smooth endoplasmic reticulum) and other small vesicles (such as fragmented Golgi complexes).
    • Reasoning: These small membrane-bound vesicles (50–200 nm50\text{--}200\text{ nm}) have very low sedimentation coefficients and require ultracentrifugation to form a pellet.
    • Enzyme Marker: Glucose-6-phosphatase is an integral membrane enzyme of the endoplasmic reticulum, confirming the microsomal fraction.
  4. Supernatant: Post-100,000×g100{,}000 \times g Fraction

    • Remaining components: Soluble cytosol (the liquid matrix of the cytoplasm) and free macromolecular complexes, such as free ribosomes.
    • Reasoning: Soluble, non-membrane-bound proteins do not sediment under these standard conditions and remain dissolved in the cytosolic liquid phase.
    • Enzyme Marker: Lactate dehydrogenase (LDH) is a key enzyme of glycolysis operating in the cytosol, making it a classic marker for this soluble fraction.

Key Pitfall to Avoid

  • Misinterpreting "Microsomes": Microsomes do not exist in an intact, living cell; they are artificial vesicle artifacts formed when the tubular networks of the endoplasmic reticulum break apart and reseal during mechanical homogenization.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sedimentation speeds of medium and small organelles, incorrectly believing microsomes/ER are denser and pellet before mitochondria and peroxisomes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pellet 1: Nuclei and whole cells

  2. Step 2

    Pellet 2: Microsomes and endoplasmic reticulum

    Correct

    Pellet 2 (20,000×g20{,}000 \times g): Mitochondria, lysosomes, and peroxisomes

    You identified microsomes for Pellet 2, but medium speeds (20,000×g20{,}000 \times g) sediment intermediate-sized organelles such as mitochondria and peroxisomes (confirmed by cytochrome c oxidase and catalase activity).

  3. Step 3

    Pellet 3: Mitochondria and peroxisomes

    Correct

    Pellet 3 (100,000×g100{,}000 \times g): Microsomes (fragments of endoplasmic reticulum) and small vesicles

    You placed mitochondria and peroxisomes in Pellet 3, but high-speed ultracentrifugation (100,000×g100{,}000 \times g) is required to pellet much smaller fragments like microsomes and small vesicles (confirmed by glucose-6-phosphatase activity).

  4. Step 4

    Supernatant: Cytosol

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that low-speed centrifugation sediments nuclei and intact cells.

You correctly recognized that the soluble cytosol remains in the final supernatant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sedimentation Order Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the fractionation order of intermediate-sized organelles and microsomes. Intact mitochondria, lysosomes, and peroxisomes (0.5–2 μm0.5\text{--}2\ \mu\text{m}) are significantly larger than homogenized microsomal vesicles (50–200 nm50\text{--}200\text{ nm}), so they sediment at lower centrifugal force (20,000×g20{,}000 \times g) before microsomes pellet at 100,000×g100{,}000 \times g.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sedimentation Velocity and Particle Size
  • In differential centrifugation, larger and denser particles sediment at lower gg-forces and shorter run times.

  • Rank cell components by size (10 μm10\ \mu\text{m} nuclei →1 μm\rightarrow 1\ \mu\text{m} mitochondria/peroxisomes →100 nm\rightarrow 100\text{ nm} microsomal vesicles →\rightarrow soluble cytosol) before assigning them to increasing speeds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. At medium speed (20,000×g20{,}000 \times g), intermediate organelles (mitochondria, lysosomes, and peroxisomes) sediment.

  2. At ultracentrifugation speed (100,000×g100{,}000 \times g), small fragmented ER vesicles (microsomes) sediment into Pellet 3.

  3. Soluble enzymes and cytosol remain in the post-100,000×g100{,}000 \times g supernatant.

Final answer

Pellet 1: Nuclei and whole cells; Pellet 2: Mitochondria, lysosomes, and peroxisomes; Pellet 3: Microsomes (ER fragments); Supernatant: Soluble cytosol

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relative diameters of intact organelles versus homogenized microsomal vesicles.

  • Associate specific biochemical marker enzymes (e.g., cytochrome c oxidase for mitochondria vs. glucose-6-phosphatase for ER/microsomes) with their fraction speeds.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the lowest-speed centrifugal fraction as isolating pure mitochondria rather than nuclei and intact cells.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pellet 1: Mitochondria

    Correct

    Pellet 1 (1,000×g1{,}000 \times g): Nuclei and unbroken cells

    Pellet 1 forms at low centrifugal speed (1,000×g1{,}000 \times g), which sediments only the largest and heaviest cellular structures—specifically the cell nuclei and any intact, unbroken cells.

  2. Step 2

    Pellet 2: Peroxisomes and lysosomes

    Correct

    Pellet 2 (20,000×g20{,}000 \times g): Mitochondria, lysosomes, and peroxisomes

    Because you placed mitochondria into Pellet 1, you listed only peroxisomes and lysosomes here. At medium speed (20,000×g20{,}000 \times g), intermediate-sized organelles sediment together: mitochondria, lysosomes, and peroxisomes.

  3. Step 3

    Pellet 3: Microsomes and endoplasmic reticulum

  4. Step 4

    Supernatant: Cytosol

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the 100,000×g100{,}000 \times g ultracentrifugation step isolates microsomes and endoplasmic reticulum fragments.

You correctly determined that the post-100,000×g100{,}000 \times g supernatant consists of the soluble cytosol.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Organelle sedimentation order confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the sedimentation of cell nuclei and whole cells at low centrifugal speed (1,000×g1{,}000 \times g), mistakenly placing medium-sized organelles (mitochondria) into the earliest pellet.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sedimentation Order by Size and Mass
  • In differential centrifugation, the largest and densest structures sediment at the lowest gg-force, while progressively smaller organelles require higher gg-forces and longer durations.

  • Always rank organelles by size before assigning fractions: Nuclei (5–10 μm5\text{--}10\ \mu\text{m}) →\rightarrow Mitochondria/Lysosomes/Peroxisomes (0.5–2 μm0.5\text{--}2\ \mu\text{m}) →\rightarrow Microsomes (50–200 nm50\text{--}200\text{ nm}) →\rightarrow Soluble Cytosol.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the nucleus is the largest organelle in a eukaryotic cell (diameter 5–10 μm5\text{--}10\ \mu\text{m}), so nuclei and intact cells pellet out first at low speed (1,000×g1{,}000 \times g for 10 min10\text{ min}).

  2. Mitochondria are intermediate-sized organelles (0.5–2 μm0.5\text{--}2\ \mu\text{m}), so they remain in the first supernatant and only sediment during the second spin (20,000×g20{,}000 \times g for 20 min20\text{ min}) alongside lysosomes and peroxisomes.

Final answer

Pellet 1: Nuclei and unbroken cells; Pellet 2: Mitochondria, lysosomes, and peroxisomes; Pellet 3: Microsomes (ER fragments) and small vesicles; Supernatant: Soluble cytosol.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relative sizes of eukaryotic organelles to build an intuitive mental ladder of sedimentation velocity.

  • Practice matching classic biochemical marker enzymes (such as cytochrome c oxidase, catalase, and glucose-6-phosphatase) directly to their corresponding centrifugal fractions.

OverviewACEpath Teacher's Diagnosis

03 The student mistakes the post-100,000 × g supernatant for containing isolated endoplasmic reticulum microsomes instead of soluble cytosol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pellet 1: Nuclei and unbroken cells

  2. Step 2

    Pellet 2: Mitochondria and peroxisomes

  3. Step 3

    Pellet 3: Soluble cytoplasmic proteins

    Correct

    Pellet 3 (100,000×g100{,}000 \times g): Microsomes (endoplasmic reticulum fragments) and small vesicles

    Ultracentrifugation at 100,000×g100{,}000 \times g forces small membrane-bound vesicles such as microsomes (derived from the ER) to sediment into the pellet; soluble proteins do not form a pellet at this stage.

  4. Step 4

    Supernatant: Endoplasmic reticulum and microsomes

    Correct

    Supernatant: Soluble cytosol (containing soluble enzymes such as lactate dehydrogenase) and free ribosomes

    Because you placed soluble proteins in Pellet 3, you placed the microsomal fraction in the supernatant. The post-100,000×g100{,}000 \times g supernatant actually retains the non-sedimenting soluble cytosol.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that differential centrifugation sediments structures in order of decreasing size and mass.

You accurately matched nuclei to the low-speed fraction (1,000×g1{,}000 \times g) and intermediate organelles to the medium-speed fraction (20,000×g20{,}000 \times g).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fraction Inversion in Ultracentrifugation

You swapped the contents of the final high-speed pellet and the remaining supernatant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misunderstood the physical state of microsomes versus soluble proteins, forgetting that membrane-bound fragments sediment under ultracentrifugation while soluble cytosolic enzymes remain dissolved in the liquid phase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Particulate vs. Soluble State
  • Differential centrifugation pellets particulate membrane structures (such as vesicles and microsomes); truly soluble cytosolic macromolecules remain in the liquid supernatant.

  • Always assign membrane fragments (microsomes) to Pellet 3 and dissolved cytosolic proteins (like lactate dehydrogenase) to the remaining supernatant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. At 100,000×g100{,}000 \times g for 60 min60\text{ min}, small vesicular fragments of the endoplasmic reticulum (microsomes) have sufficient mass and sedimentation coefficients to pellet out, yielding glucose-6-phosphatase activity in Pellet 3.

  2. The remaining post-100,000×g100{,}000 \times g liquid phase is the soluble cytosol, retaining dissolved enzymes such as lactate dehydrogenase.

Final answer

Pellet 1: Nuclei and unbroken cells; Pellet 2: Mitochondria, lysosomes, and peroxisomes; Pellet 3: Microsomes and small vesicles; Supernatant: Soluble cytosol.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the cellular origins and physical nature of microsomes as closed vesicles derived from fragmented endoplasmic reticulum.

  • Practice associating specific diagnostic marker enzymes with their corresponding subcellular fractions.

Lock it in

Similar question

01

A researcher spins a cell homogenate at 600×g600 \times g for 10 min10\text{ min}, discards the pellet, and then centrifuges the supernatant at 15,000×g15{,}000 \times g for 15 min15\text{ min}. Which organelle and associated enzyme activity will be predominantly enriched in this second pellet?

Answer

Mitochondria (and peroxisomes/lysosomes), marked by cytochrome c oxidase activity. The intermediate gg-force (15,000×g15{,}000 \times g) precipitates medium-sized organelles after nuclei and debris have already been removed at 600×g600 \times g.

02

Following differential centrifugation, assays show high catalase activity in Fraction A, high lactate dehydrogenase (LDH) activity in Fraction B, and high glucose-6-phosphatase activity in Fraction C. Identify the cellular compartments represented by Fractions A, B, and C in order of increasing centrifugal force required to isolate them.

Answer

Fraction A (20,000×g20{,}000 \times g pellet: peroxisomes), Fraction C (100,000×g100{,}000 \times g pellet: microsomes/ER), and Fraction B (post-100,000×g100{,}000 \times g supernatant: soluble cytosol). Catalase marks peroxisomes, glucose-6-phosphatase marks microsomes, and LDH marks soluble cytosolic proteins.

03

Why are intact endoplasmic reticulum networks not recovered as whole intact organelles in low-speed centrifugation, whereas nuclei are easily recovered at 1,000×g1{,}000 \times g?

Answer

The ER forms an extensive, interconnected, delicate tubular/sheet network throughout the cytoplasm. Mechanical homogenization shears this continuous network into tiny, self-sealing vesicles called microsomes (50–200 nm50\text{--}200\text{ nm} in diameter). Because these vesicles are tiny, they stay suspended at low speeds and require ultracentrifugation (100,000×g100{,}000 \times g) to pellet, whereas dense, intact nuclei (5–10 μm5\text{--}10\ \mu\text{m}) sediment readily at 1,000×g1{,}000 \times g.

Loading workspace…